TFS403A [VECTRON]
Filter Specification; 过滤器规格型号: | TFS403A |
厂家: | Vectron International, Inc |
描述: | Filter Specification |
文件: | 总5页 (文件大小:73K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Tfs403A.doc
version 1.3
27.11.2002
VI TELEFILTER
Filter Specification
TFS 403A
1/5
Measurement condition
Ambient temperature:
Input power level:
23
10 dBm
C
Terminating impedances at f *:
for input:
140
137
-10,2 pF
- 8,8 pF
c
for output:
Characteristics
Remark:
Reference level for the relative attenuation a
of the TFS 403A is the minimum of the pass band attenuation a
. The minimum of the pass
min
rel
band attenuation a
min
is defined as the insertion loss a . The centre frequency f is the arithmetic mean value of the upper and lower frequencies
e c
at the 3 dB filter attenuation level relative to the insertion loss a . The nominal frequency f is fixed at 403,5 MHz without tolerance. The given
e
N
values for the relative attenuation a
and for the group delay ripple have to be reached at the frequencies given below even if the centre
rel
frequency f is shifted due to the temperature coefficient of frequency TC in the operating temperature range and due to a production tolerance
c
f
for the centre frequency f .
c
D a t a
typ. Value
Limit
max. 5,5 dB
Insertion loss
a
e
4,8 dB
(Reference level)
Nominal frequency
Pass band
f
-
403,5 MHz
1,5 MHz
1,5 dB
N
PB
p-p
-
f
N
Amplitude ripple in PB
Relative attenuation
0,8 dB
max.
a
rel
f
.......
f
±
1,5 MHz
-
max.
3
dB
N
N
f
±
±
4,5 MHz ......
f
±
±
19,5 MHz
28
40
45
dB
dB
dB
min. 25
min. 35
min. 20
dB
dB
dB
N
N
N
f
19,5 MHz ....... f
MHz
100
MHz
N
2 f
±
3
N
Return loss within PB
12
-
dB
min.
8
dB
Input power level
max. 10
dBm
Temperature coefficient of frequency Tcf
Operating temperature range
-20
ppm/K
-
- 10 °C.. + 60
- 40 °C.. + 85
-
°C
°C
Storage temperature range
-
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as
reference values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.
generated:
checked / approved:
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Tfs403A.doc
version 1.3
27.11.2002
VI TELEFILTER
Filter Specification
TFS 403A
2/5
Construction, pin configuration and 50 - matching network
(All dimensions in mm)
5
7
1,78
403A
SQ 3,81
+ 0,2 / -0,1
1,78 0,6
P48
0,1
1
3
2,54
1,2 Max.
Date code
Date code:
Year + week
Pin 1 Input
Pin 5 Output
M
N
P
2000
2001
2002
Pin 2 Input RF Return
Pin 3 Ground
Pin 4 Package Ground
Pin 6 Ground
Pin 7 Ground
Pin 8 Package ground
...
50 Ohm Test circuit
L1
C1
C2
1
5
LB-OUT
L3
SAW
L2
6
2
1 : 1
3,4,7,8
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Tfs403A.doc
version 1.3
27.11.2002
VI TELEFILTER
Filter Specification
TFS 403A
3/5
Stability Characteristics
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 18 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Change of
temperature:
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
4. Resistance to
solder heat (reflow):
reflow possible: twice max.;
for temperature conditions, please refer to the attached "Air reflow temperature conditions" on page
Packing
Tape & Reel:
IEC 286 - 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer
3000
min 300 mm
min 500 mm
min 300 mm
Tape (all dimensions in mm)
EMBOSSED CARRIER TAPE
W
Po
Do
E
:
:
12
4
± 0,3
± 0,1
Po
P 2
D
o
:
1,5 + 0,1
E
F
:
1,75 ± 0,1
Ao
F
:
5,5 ± 0,05
0,75
G (min) :
D 1
CT
W
Bo
P2
P1
:
2
± 0,05
± 0,1
:
8
G
D1(min) :
1,5
Ao
Bo
CT
:
:
4,3 ± 0,1
4,3 ± 0,1
9,5 ± 0,1
P1
COVER TAPE
:
W
2
Reel (all dimensions in mm):
A
:
:
330
12,4 + 2,0
W1
W2 (max) :
18,4
C
N (min)
C
:
50
A
N
:
13 -+0,5/ -0,2
W
1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape.
Markings on the filters can be read if the upper side of the carrier tape is regarded with the sprocket holes on its right.
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Tfs403A.doc
version 1.3
27.11.2002
VI TELEFILTER
Filter Specification
TFS 403A
4/5
Air reflow temperature conditions
1st and 2nd air reflow profile
Name: pre-heating periods
main-heating periods
over 200 °C
peak temperature
255 °C ± 5 °C
Temperature: 150 °C - 170 °C
Time:
60 sec. - 90 sec.
20 sec. - 25 sec.
Chip-mount air reflow profile
260
240
220
200
180
160
140
120
100
80
60
40
20
0
0
20
40
60
80
100
120
140
160
180
200
220
240
time / sec.
Table for temperature vs. time during the air reflow process
Tolerance of temperatures: ± 5 °C
time / sec.
0
temperature / °C
time / sec.
140
150
160
170
180
190
195
200
205
210
215
220
230
240
temperature / °C
23
34
46
60
160
161
164
170
180
205
230
255
230
205
180
165
140
120
10
20
30
40
50
60
70
80
80
103
121
134
143
150
154
156
158
159
90
100
110
120
130
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Tfs403A.doc
version 1.3
27.11.2002
VI TELEFILTER
Filter Specification
TFS 403A
5/5
History
Version
1.0
Reason of Changes
Name
Chilla
Chilla
Date
generation of “Development specification” according to customer requirements
14.08.2002
22.08.2002
1.1
add limit line 20 dB at 804-810 MHz
1.2
1.3
limit line at 2 f ±3 MHz corrected
Chilla
26.08.2002
27.11.2002
N
adding typical values of relative attenuation and terminating impedance
Pfeiffer
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
相关型号:
©2020 ICPDF网 联系我们和版权申明