TFS403_06 [VECTRON]
Filter specification; 过滤器规格型号: | TFS403_06 |
厂家: | Vectron International, Inc |
描述: | Filter specification |
文件: | 总5页 (文件大小:163K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Filename: tfs 403.doc
Version 1.5
13.12.2006
VI TELEFILTER
Filter specification
TFS 403
1/5
Measurement condition
Ambient temperature:
Input power level:
Terminating impedance: *
Input:
23
0
°C
dBm
81 Ω || -11,5 pF
86 Ω || -12,6 pF
Output:
Characteristics
Remark:
The reference level for the relative attenuation a
of the TFS 403 is the minimum of the pass band attenuation a
. The minimum of the pass band
min
rel
is defined as the insertion loss a . The centre frequency f is the arithmetic mean value of the upper and lower frequencies at the 3 dB
attenuation a
min
e
c
filter attenuation level relative to the insertion loss a . The nominal frequency f is fixed at 403,5 MHz without any tolerance. The given values for both the
e
N
relative attenuation a and the group delay ripple have to be achieved at the frequencies given below even if the centre frequency f is shifted due to the
rel
c
temperature coefficient of frequency TC in the operating temperature range and due to a production tolerance for the centre frequency f .
f
c
D a t a
typ. Value
Limit
Insertion loss
a
4,6 dB
max.
5,5 dB
e
(Reference level)
Nominal frequency
Pass band
f
-
403,5 MHz
± 1,5 MHz
N
N
PB
p-p
f
Amplitude ripple in PB
Relative attenuation
0,6 dB
max.
1
dB
a
rel
f
.......
f
±
1,5
9
MHz
-
max. 1
dB
N
N
f
f
f
f
±
±
±
5,5 MHz ...... f
±
±
±
+
MHz
MHz
MHz
MHz
32 dB
32 dB
45 dB
70 dB
85 dB
min. 20
min. 25
min. 35
min. 20
min. 20
dB
dB
dB
dB
dB
N
N
N
N
N
N
N
N
9
MHz ....... f
19,5
23,5
19,5 MHz ....... f
+ 400,5 MHz ....... f
MHz
406,5
2 f
±
3
N
Return loss within PB
14 dB
-
-
Input power level
max. 10
dBm
Temperature coefficient of frequency Tcf **
Operating temperature range
-20 ppm/K
-
- 10 °C.. + 60
- 40 °C.. + 85
°C
°C
Storage temperature range
-
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference
values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.
**) ∆f (Hz) = Tcf(ppm/K) x (T - TA) x fCTA (MHz)
c
Generated:
Checked / Approved:
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 403.doc
Version 1.5
13.12.2006
VI TELEFILTER
Filter specification
TFS 403
2/5
Construction and Pin Connection
(All dimensions in mm)
+0.15
-0.1
5.0 SQ
7
5
S 403
P48
1
3
Date code
Pin 1
Pin 2
Pin 3
Input
Input RF Return
Ground
Pin 5 Output
Pin 6 Output RF Return
Pin 7 Ground
date code:
year + week
M
N
P
2000
2001
2002
Pin 4,8 Package Ground
...
50 Ω matching circuit
L1
1
5
L3
Input
Output
50 Ohm
SAW
50 Ohm
L2
L4
2,3,4,6,7,8
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 403.doc
Version 1.5
13.12.2006
VI TELEFILTER
Filter specification
TFS 403
3/5
Stability characteristics, reliability
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 1 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Change of
temperature:
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
4. Resistance to
solder heat (reflow):
reflow possible: three times max.;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
This filter is RoHS compliant (2002/95/EG, 2005/618/EG)
Packing
Tape & Reel:
DIN IEC 286 – 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer
3000
min 300 mm
min 500 mm
min 300 mm
Tape (all dimensions in mm)
EMBOSSED CARRIER TAPE
W
Po
Do
E
:
:
:
:
:
12
4
± 0,3
± 0,1
Po
P 2
D
o
1,5 + 0,1
1,75 ± 0,1
E
F
Ao
F
5,5 ± 0,05
0,75
G (min) :
D 1
CT
W
Bo
P2
P1
:
2
± 0,05
± 0,1
:
8
G
D1(min) :
1,5
Ao
Bo
CT
:
:
5,3 ± 0,1
5,3 ± 0,1
9,5 ± 0,1
P1
COVER TAPE
:
W
2
Reel (all dimensions in mm):
A
:
:
:
:
330
W1
12,4 + 0,2
18,4
W2 (max)
N (min)
50
C
A
C
:
13 +0,5 -0,2
N
W
1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape.
Markings on the filters can be read if the upper side of the carrier tape is regarded with the sprocket holes on its right.
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 403.doc
Version 1.5
13.12.2006
VI TELEFILTER
Filter specification
TFS 403
4/5
Air reflow temperature conditions
Conditions
Exposure
Average ramp-up rate (30°C to 217°C)
> 100°C
less than 3°C/second
between 300 and 600 seconds
> 150°C
> 217°C
Peak temperature
between 240 and 500 seconds
between 30 and 150 seconds
max. 260°C
Time within 5°C of actual peak temperature
Cool-down rate (Peak to 50°C)
Time from 30°C to Peak temperature
between 10 and 30 seconds
less than 6°C/second
no greater than 300 seconds
Chip-mount air reflow profile
Temperature / °C
max. 260°C
217°C
Time / s
max. 300 s
10 ... 30 s
30 ... 150 s
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 403.doc
Version 1.5
13.12.2006
VI TELEFILTER
Filter specification
TFS 403
5/5
History
Version
Reason of Changes
Name
Date
1.0
generation of “Development specification” according to customer requirements
and feasibility study
Chilla
Chilla
Chilla
28.05.2002
22.08.2002
26.08.2002
1.1
1.2
change of Tcf
add limit line 20 dB at 804-810 MHz
limit line at 2 f ±3 MHz corrected
N
1.3
1.4
add typical values off terminating impedance and relative attenuation
Pfeiffer
Pfeiffer
11.09.2002
25.11.2002
change terminating impedance and typical values of insertion loss and relative
attenuation
1.5
change stability characteristics
Strehl
13.12.2006
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
相关型号:
©2020 ICPDF网 联系我们和版权申明