TFS420A1 [VECTRON]
Filter specification; 过滤器规格
| 型号： | TFS420A1 |
| 厂家： | 
Vectron International, Inc |
| 描述： | Filter specification |
| 文件： | 总4页 (文件大小：51K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
tfs 420A1.doc
Version 1.0
06.01.02
VI TELEFILTER
Filter specification
TFS 420 A1 - 1/4
1. Measurement condition
Ambient temperature TA:
Input power level:
23 °C
0
dBm
Typical terminating impedances in fN:
for input:
for output:
210 Ω -5,38 pF.
174 Ω -3,99 pF.
2. Characteristics
Remark:
Reference level for the relative attenuation a
of the TFS 420A1 is the minimum of the pass band attenuation a . The minimum of the
min
rel
pass band attenuation a
is defined as the insertion loss a . The nominal frequence fN is fixed at 420,0 MHz without tolerance or limit. The
e
min
reference frequence f is the arithmetic mean value of the upper and lower frequencies at the 3 dB filter attenuation level relative to the
c
insertion loss a . The temperature coefficient of frequency Tcf is valid both for the reference frequency f and the frequency response of the
e
c
filter in the operating temperature range.
Data
typ. value
tolerance / limit
Insertion loss (Reference level)
Nominal frequency
a
21,5
-
dB
max 24
420,0
-
dB
e
fN
MHz
Centre frequency
Pass band (-1dB)
f
at ambient temperature ( fCAT
)
420,03
MHz
dB
c
fN - 4,1 MHz ... fN + 4,1 MHz
Amplitude ripple (p-p): fN ... fN ± 4,1 MHz
Bandwidth at ambient temperature:
0,4
max 1,0
dB
1
3
dB - band width
dB - band width
9,14
10,50
14,23
15,91
MHz
MHz
MHz
MHz
20 dB - band width
40 dB - band width
Relative attenuation
fN
a
rel
fN ± 4,1
fN ± 5,0
fN ± 10
fN ± 100
fN - 100
fN + 300
MHz
MHz
MHz
MHz
MHz
MHz
-
-
-
dB
dB
dB
max. 1
max. 3
min. 3
min. 40
dB
dB
dB
dB
fN ± 4,1
fN ± 5,5
fN ± 10
fN - 430
fN + 100
MHz
MHz
MHz
MHz
MHz
45...60
70...80
60...70
Average group delay in pass band:
Group delay ripple in pass band (p-p):
0,630
40
µs
ns
max 60
ns
Triple transit attenuation compared to main signal:
Crosstalk
Frequency inversion temperature ( To )
Temperature coefficient of frequency ( Tcf )
45...49
50...54
30
dB
dB
°C
ppm/K²
- 0,050
Frequency deviation of f over temperature T : *)
∆f (Hz) = Tcf(ppm/K) x (T - To)² x fTo(MHz)
c
c
Operating temperature range
Storage temperature range
Input power level
-20 °C ... + 75 °C
- 40 °C ... + 85 °C
-
max. + 10
dBm
*) fTo is reference frequence f at frequency inversion temperature (To )
c
Generated:
Wadim P. Dunzow
Dr. Bert Wall
Checked/Approved:
VI TELEFILTER
Potsdamer Straße 18
Vectron International, Inc.
267 Lowell Road
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
Hudson, NH 03051 / USA
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: vti@vtinh.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information
tfs 420A1.doc
Version 1.0
06.01.02
VI TELEFILTER
Filter specification
TFS 420 A1 - 2/4
3. Package
S 420 A1
M04
10 Input
9
4
3
Input RF Return
Output
Output RF Return
1, 2, 5-9, 11, 12 - Ground
4. 50 Ω matching network:
L2
L4
4
5
6
12
11
10
L3
L1
9 8 7
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
Vectron International, Inc.
267 Lowell Road
Hudson, NH 03051 / USA
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: vti@vtinh.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information
tfs 420A1.doc
Version 1.0
06.01.02
VI TELEFILTER
Filter specification
TFS 420 A1 - 3/4
Stability characteristics
After the following tests the filter shall meet the whole specification:
1. Shock:
30g, 18 ms, half sine wave, 3 shocks each plane;
IEC 68 - 2 - 27
2. Vibration:
3. Damp heat:
10 Hz to 150 Hz, 0.35 mm amplitude, 5g; 2 hours for 3 planes;
IEC 68 - 2 - 6
90 % to 95 % rel. humidity, 40 °C, 10 days;
IEC 68 - 2 - 3
4. Resistance to
solder heat (Reflow):
260 °C for 10 sec;
Packing
Tape & Reel:
IEC 286 - 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel: 3000
Tape (all dimensions in mm)
EMBOSSED CARRIER TAPE
W
Po
Do
D1
E
:
:
:
:
:
:
16
4
± 0,3
± 0,1
Po
P 2
D
o
1,5 + 0,5
1,5 + 0,5
1,75 ± 0,1
7,5 ± 0,1
0,75
E
F
Ao
D1
F
±
0,1
13,4
W
Bo
G (min) :
P2
P1
:
2
8
± 0,05
± 0,1
G
:
D1(min) : 1,5
P1
Ao
Bo
:
:
5,4 ± 0,1
7,4 ± 0,1
COVER TAPE
W
2
Reel (all dimensions in mm):
A
:
330
W1
:
:
16,4 +2
W2 (max) :
22,4
N (min)
C
>= 90
C
A
:
13
± 0,25
N
W
1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape.
The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on
the right side of the tape.
VI TELEFILTER
Potsdamer Straße 18
Vectron International, Inc.
267 Lowell Road
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
Hudson, NH 03051 / USA
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: vti@vtinh.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information
tfs 420A1.doc
Version 1.0
06.01.02
VI TELEFILTER
Filter specification
TFS 420 A1 - 4/4
Air reflow temperature conditions:
1st and 2nd air reflow profile
Name:
Temperature:
Time:
pre-heating periods
150 °C - 170 °C
60 sec. - 90 sec.
main-heating periods
over 200 °C
20 sec. - 25 sec.
peak temperature
255 °C ± 5 °C
Chip-mount air reflow profile
260
240
220
200
180
160
140
120
100
80
60
40
20
0
0
20
40
60
80
100
120
140
160
180
200
220
240
time / sec.
Table for temperature vs. time during the air reflow process
Tolerance of temperatures: ± 5 °C
time / sec.
0
10
20
30
40
50
60
70
80
90
100
110
120
130
temperature / °C
time / sec.
140
150
160
170
180
190
195
200
205
210
215
220
230
240
temperature / °C
23
34
46
60
80
103
121
134
143
150
154
156
158
159
160
161
164
170
180
205
230
255
230
205
180
165
140
120
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Vectron International, Inc.
267 Lowell Road
Hudson, NH 03051 / USA
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: vti@vtinh.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information
相关型号：
©2020 ICPDF网 联系我们和版权申明