TFS420H [VECTRON]

Filter specification; 过滤器规格
TFS420H
型号: TFS420H
厂家: Vectron International, Inc    Vectron International, Inc
描述:

Filter specification
过滤器规格

过滤器
文件: 总5页 (文件大小:219K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Filename: tfs 420h.doc  
Version 1.3  
26.04.2004  
VI TELEFILTER  
Filter specification  
TFS 420H  
1/5  
Measurement condition  
Ambient temperature:  
Input power level:  
Terminating impedance: *  
Input:  
23  
0
°C  
dBm  
61 || -9.0 pF  
81 || -8.9 pF  
Output:  
Characteristics  
Remark:  
The reference level for the relative attenuation a of the TFS420H is the minimum of the pass band attenuation a  
. The minimum of the pass band  
min  
rel  
attenuation a  
is defined as the insertion loss a . The centre frequency f is the arithmetic mean value of the upper and lower frequencies at the 3 dB  
min  
e c  
filter attenuation level relative to the insertion loss a . The nominal frequency f is fixed at 420 MHz without any tolerance. The given values for the relative  
attenuation a  
frequency TC in the operating temperature range and due to a production tolerance for the centre frequency f .  
e
N
have to be achieved at the frequencies given below even if the centre frequency f is shifted due to the temperature coefficient of  
rel  
c
f
c
D a t a  
typ. value  
tolerance / limit  
8,2  
dB  
a
max.  
10  
dB  
Insertion loss  
e
(reference level)  
fN  
Nominal frequency  
(at 70°C)  
420  
MHz  
fC  
421,7  
0,5  
MHz  
dB  
Centre frequency  
(at ambient temperature)  
fN  
±
15  
1
MHz  
Passband  
Pass band ripple  
max.  
dB  
a
Relative attenuation  
rel  
fN  
fN  
fN  
-
+
+
410  
25  
180  
MHz  
MHz  
MHz  
fN  
fN  
fN  
-
+
+
25  
180  
580  
MHz  
MHz  
MHz  
43  
42  
55  
dB  
dB  
dB  
min.  
min.  
min.  
40  
40  
25  
dB  
dB  
dB  
max.  
12  
deg  
Phase linearity (p-p) within PB  
1,4:1  
1,6:1  
max.  
max.  
1,5:1  
1,8:1  
VSWR within fN ± 12 MHz  
within fN ± 15 MHz  
OTR  
+ 65 °C ... + 75°C  
Operating temperature range  
Storage temperature range  
- 40 °C ... + 85°C  
-
TC **  
-87  
ppm/K  
Temperature coefficient of frequency  
f
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as  
reference values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.  
**) f (Hz) = Tcf(ppm/K) x (T - TA) x fCAT (MHz)  
c
Generated:  
Checked / Approved:  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 420h.doc  
Version 1.3  
26.04.2004  
VI TELEFILTER  
Filter specification  
TFS 420H  
2/5  
0
0
-1  
-2  
-3  
2.44  
2.2  
-6  
-12  
-18  
1.96  
1.72  
1.48  
-24  
B
B
d
-4  
-5  
d
-30  
s
n
i
n
i
µ
1.24  
e
e
d
u
n
-36  
i
d
y
u
t
i
t
i
a
l
-42  
-48  
-54  
-60  
-6  
1
n
n
e
d
g
g
a
a
m
m
-7  
0.76  
0.52  
0.28  
0.04  
-8  
-9  
-10  
322.7 342.5 362.3 382.1 401.9 421.7 441.5 461.3 481.1 500.9 520.7  
frequency in MHz  
402.7 406.5 410.3 414.1 417.9 421.7 425.5 429.3 433.1 436.9 440.7  
frequency in MHz  
Construction and pin connection  
(All dimensions in mm)  
13,6Max.  
1
2
3
4
5
6
Ground  
Ground  
Ground  
Ground  
Output RF Return  
Output  
7
8
9
10  
11  
12  
Ground  
Ground  
Ground  
Ground  
Input RF Return  
Input  
TFS 420H  
S17  
1
Date code  
2,54 ±0,15  
1,5  
Date code: Year + week  
S
T
U
...  
2004  
2005  
2006  
2
1
3 4  
12  
11  
5
6
9 8  
10  
7
0,1  
0,8  
50 Ohm Test circuit  
L1  
12  
L2  
6
C1  
C2  
1, 2, 3, 4, 7, 8, 9, 10  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 420h.doc  
Version 1.3  
26.04.2004  
VI TELEFILTER  
Filter specification  
TFS 420H  
3/5  
Stability Characteristics  
After the following tests, the filter shall meet the whole specification:  
1. Shock:  
500g, 18 ms, half sine wave, 3 shocks each plane;  
DIN IEC 68 T2 - 27  
2. Vibration:  
10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans;  
DIN IEC 68 T2 - 6  
3. Change of  
temperature  
-55 °C to 125°C / 30 min. each / 10 cycles  
DIN IEC 68 part 2 – 14 Test N  
4. Resistance to  
solder heat (reflow):  
reflow possible: twice max.;  
for temperature conditions, please refer to the attached "Air reflow temperature conditions" on page 4;  
Packing  
Tape & Reel:  
IEC 286 – 3, with exeption of value for N and minimum bending radius;  
tape type II, embossed carrier tape with top cover tape on the upper side;  
max. pieces of filters peer reel:  
reel of empty components at start:  
reel of empty components at start including leader:  
trailer:  
1700  
min. 300 mm  
min. 500 mm  
min. 300 mm  
EMBOSSED CARRIER TAPE  
Tape (all dimensions in mm)  
2
Po  
P
D
o
W
: 24,00 +0,30/-0,10  
Po  
Do  
E
F
G(min)  
P2  
:
:
:
4,00 ± 0,1  
1,50 +0,1/-0  
1,75 ± 0,10  
E
F
o
A
1
: 11,50 ± 0,10  
:
:
D
0,60  
2,00 ± 0,1  
Ct  
W
o
B
P1  
: 12,00 ± 0,1  
D1(min)  
Ao  
:
:
1,50  
7,10 ± 0,10  
G
Bo  
Ct  
: 13,90 ± 0,10  
: 21,5 ± 0,1  
P1  
COVER TAPE  
W
2
Reel (all dimensions in mm)  
A
:330  
W1  
: 24,4 +2/-0  
W2(max) : 30,4  
N(min)  
C
: 60  
: 13,0 +0,5/-0,2  
C
A
N
W
1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. Marking  
of the filters can be read if the upper side of the carrier tape is regarded with the sprocket holes on the right.  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 420h.doc  
Version 1.3  
26.04.2004  
VI TELEFILTER  
Filter specification  
TFS 420H  
4/5  
Air reflow temperature conditions  
1st and 2nd air reflow profile  
Name:  
Temperature:  
Time:  
pre-heating periods main-heating periods  
peak temperature  
255 °C ± 5 °C  
150 °C - 170 °C  
60 sec. - 90 sec.  
over 200 °C  
20 sec. - 25 sec.  
Chip-mount air reflow profile  
260  
240  
220  
200  
180  
160  
140  
120  
100  
80  
60  
40  
20  
0
0
20  
40  
60  
80  
100  
120  
140  
160  
180  
200  
220  
240  
time / sec.  
Table for temperature vs. time during the air reflow process  
Tolerance of temperatures: ± 5 °C  
time / sec.  
0
10  
20  
30  
40  
50  
60  
70  
80  
90  
100  
110  
120  
130  
temperature / °C  
time / sec.  
temperature / °C  
23  
34  
46  
60  
80  
103  
121  
134  
143  
150  
154  
156  
158  
159  
140  
150  
160  
170  
180  
190  
195  
200  
205  
210  
215  
220  
230  
240  
160  
161  
164  
170  
180  
205  
230  
255  
230  
205  
180  
165  
140  
120  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 420h.doc  
Version 1.3  
26.04.2004  
VI TELEFILTER  
Filter specification  
TFS 420H  
5/5  
History  
Version  
Reason of Changes  
Name  
Date  
1.0  
1.1  
generate of development specification  
Roizengaft  
Chilla  
18.11.2003  
10.03.2004  
changed remark  
changed insertion loss  
changed temperature for nominal frequency  
changed centre frequency  
changed to relative attenuation  
changed explanation for temperature coefficient  
changed date code  
1.2  
1.3  
changed insertion loss  
Chilla  
Chilla  
25.03.2004  
26.04.2004  
created filter specification  
added typical values  
added filter characteristic  
changed mark  
changed VSWR  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  

相关型号:

TFS421

Filter specification
VECTRON

TFS426

Filter specfication
VECTRON

TFS426C

Filter specification
VECTRON

TFS429

Filter specification
VECTRON

TFS430B

Filter Specification
VECTRON

TFS430C

Filter specification
VECTRON

TFS430D

Filter specification
VECTRON

TFS433AA

Filter specification
VECTRON

TFS433B

Filter specification
VECTRON

TFS433C

Filter specification
VECTRON

TFS433E

Filter Specification
VECTRON

TFS433F

Filter specification
VECTRON