ML7036-001GA [OKI]
Telecom Circuit, 1-Func, PQFP56, 9 X 10 MM, 0.65 MM PITCH, PLASTIC, QFP-56;型号: | ML7036-001GA |
厂家: | OKI ELECTRONIC COMPONETS |
描述: | Telecom Circuit, 1-Func, PQFP56, 9 X 10 MM, 0.65 MM PITCH, PLASTIC, QFP-56 |
文件: | 总4页 (文件大小:114K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
FEDL7036-001-02
This version: Feb 5, 2001
Previous version: Jan 31, 2001
1
Semiconductor
Preliminary
ML7036-001GA
Echo Canceller with Dual Codecs for Hands-free
SPECIAL NOTE
The specifications herein still includes target specifications, which might be altered without any prior information.
GENERAL DESCRIPTION
The ML7036-001 is an IC device consisted with built-in line/acoustic-selectable echo canceller and two channels
of PCM codec’s for simple interfaces to a speaker and from a microphone (acoustic side) and for handset analogue
voice interface (line side).
For the line interface, additionally µ-law PCM or 16-bit linear PCM digital interface is reserved for cellular phones
with digital audio interface.
Equipped with gain and mute controls for data transmission and reception as well as an Auto Gain Control function
which simplify your level diagram design, and transfer clock and sync clock generators for digital communication,
ideally suited for a hands-free.
FEATURES
• Single 3 V Power Supply Operation (2.7 ~ 3.6V)
• Built-in line/acoustic-selectable 1-channel echo canceller
Echo attenuation
: 35 dB (typ.) for white noise
Cancelable echo delay time : 27 ms (max.) (= default)
• 2-channels built-in CODEC’s
Synchronous transmission and reception enables full duplex operation
• AGC’s (Auto Gain Controllers) both on transmit and receive
• Built-in analog input gain amp stage (max. gain = 30 dB)
• Analog output configuration : Push-pull drive (can drive a 1.2 kΩ load)
• Digital interface coding formats
• Digital interface sync formats
• Digital interface bit sequence
: µ-law PCM, 16-bit linear (2's complement)
: Long-frame-sync, short-frame-sync
: MSB-first, LSB-first (selectable by a control register)
• Built-in digital transmission clock generators
Sync clock (SYNC)
Transmission clock (BCLK)
• Digital transmission rate
External input
: 8 kHz output
: 64 kHz output (µ-law PCM)/128 kHz output (16-bit linear)
: 64 to 2048 kbps
: 64 kbps (µ-law PCM)/128 kbps (16-bit linear)
Internal generation
• Fixed digital interface sync clock (SYNC) enables automatic power-down
• Master clock frequency
: 19.2 MHz
Compatible with crystal oscillator and crystal
• Low power consumption
Operating mode
Power down operation
: (TBD) mA typ. (when VDD = 3.0 V in a silent mode)
: (TBD) mA typ. (when VDD = 3.0 V in a silent mode)
• Transmit/receive mute function, transmit/receive selectable gain setting
• Control by both the serial microcomputer interface and parallel port is possible
• Package
: 56-pin plastic QFP (QFP56-P-910-0.65-2K) (Product name: ML7036-001GA)
COMMERCIAL IN CONFIDENCE
1/4
FEDL7036-001-02
1
Semiconductor
ML7036-001
BLOCK DIAGRAM
Remarks : An acoustic echo canceller and a line echo canceller cannot be simultaneously enabled, and all the
functionalities in an unselected echo canceller are disabled.
AGND
AVDD
DGND1,2
DVDD1,2
TEST1-4
PCMO
PCMI
DEN
EXCK
DIN
DOUT
MCUSEL
RPAD1-4
TPAD1-4
GLPAD1,2
RAGC1,2
TAGC1,2
RST
ECSEL
THR
ATT1,2
HD
SYNC
SYNCSEL
BCLK
CLKSEL
PCMSEL
PDN/RST
MCK/X1
X2
SYPDN
COMMERCIAL IN CONFIDENCE
2/4
FEDL7036-001-02
1
Semiconductor
ML7036-001
PIN CONFIGURATION (TOP VIEW) . . . NOT YET FIXED
43
44
45
46
47
48
49
28
27
26
25
24
23
22
21
20
19
18
17
16
15
ML7036-001
50
51
52
53
54
55
56
COMMERCIAL IN CONFIDENCE
3/4
FEDL7036-001-02
1
Semiconductor
ML7036-001
NOTICE
1. The information contained herein can change without notice owing to product and/or technical improvements.
Before using the product, please make sure that the information being referred to is up-to-date.
2. The outline of action and examples for application circuits described herein have been chosen as an
explanation for the standard action and performance of the product. When planning to use the product, please
ensure that the external conditions are reflected in the actual circuit, assembly, and program designs.
3. When designing your product, please use our product below the specified maximum ratings and within the
specified operating ranges including, but not limited to, operating voltage, power dissipation, and operating
temperature.
4. Oki assumes no responsibility or liability whatsoever for any failure or unusual or unexpected operation
resulting from misuse, neglect, improper installation, repair, alteration or accident, improper handling, or
unusual physical or electrical stress including, but not limited to, exposure to parameters beyond the specified
maximum ratings or operation outside the specified operating range.
5. Neither indemnity against nor license of a third party’s industrial and intellectual property right, etc. is
granted by us in connection with the use of the product and/or the information and drawings contained herein.
No responsibility is assumed by us for any infringement of a third party’s right which may result from the use
thereof.
6. The products listed in this document are intended for use in general electronics equipment for commercial
applications (e.g., office automation, communication equipment, measurement equipment, consumer
electronics, etc.). These products are not authorized for use in any system or application that requires special
or enhanced quality and reliability characteristics nor in any system or application where the failure of such
system or application may result in the loss or damage of property, or death or injury to humans.
Such applications include, but are not limited to, traffic and automotive equipment, safety devices, aerospace
equipment, nuclear power control, medical equipment, and life-support systems.
7. Certain products in this document may need government approval before they can be exported to particular
countries. The purchaser assumes the responsibility of determining the legality of export of these products
and will take appropriate and necessary steps at their own expense for these.
8. No part of the contents contained herein may be reprinted or reproduced without our prior permission.
Copyright 2000 Oki Electric Industry Co., Ltd.
COMMERCIAL IN CONFIDENCE
4/4
相关型号:
ML7041
single-channel full duplex CODEC LSI device which performs mutual transcoding between the analog voice band signals ranging from 300 to 3400 Hz and th
OKI
ML7041TB
single-channel full duplex CODEC LSI device which performs mutual transcoding between the analog voice band signals ranging from 300 to 3400 Hz and th
OKI
©2020 ICPDF网 联系我们和版权申明