TFS468L_08 [VECTRON]

Filter specification; 过滤器规格
TFS468L_08
型号: TFS468L_08
厂家: Vectron International, Inc    Vectron International, Inc
描述:

Filter specification
过滤器规格

过滤器
文件: 总5页 (文件大小:250K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Filename: tfs 468l.doc  
Version 1.4  
12.06.2008  
Vectron International  
Filter specification  
TFS 468L  
1/5  
Measurement condition  
Ambient temperature:  
Input power level:  
Terminating impedance: *  
Input:  
23  
5
°C  
dBm  
120 || -9 pF  
70 || -12 pF  
Output:  
Characteristics  
Remark:  
The reference level for the relative attenuation a of the TFS 468L is the minimum of the pass band attenuation. This value is defined as the insertion loss  
rel  
a . The nominal frequency f is fixed at 468,0 MHz without any tolerance. The values of relative attenuation a are guaranteed for the whole operating  
e
N
rel  
temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme.  
D a t a  
typ. value  
tolerance / limit  
a
11.3  
dB  
max.  
14,0*** dB  
Insertion loss  
(reference level)  
e
fN  
-
468  
-
MHz  
Nominal frequency  
Centre frequency  
fC  
468  
MHz  
PB  
-
fN  
±
9,75 MHz  
Passband  
0,3  
dB  
dB  
max.  
max.  
1,0  
dB  
dB  
Pass band ripple  
0,2  
2,5  
Amplitude ripple within fN ± 10,0 MHz  
Bandwidth  
BW  
1
dB  
23,6  
MHz  
min.  
19,5  
MHz  
a
Relative attenuation  
rel  
f
f
±
±
9,75 MHz  
10,00 MHz  
0,3  
0,3  
dB  
dB  
max.  
max.  
1,0  
2,5  
dB  
dB  
fNN  
fN  
fN  
fN  
fN  
fN  
±
±
±
±
-
9,75 MHz  
fNN  
15,5  
MHz  
MHz  
MHz  
MHz  
MHz  
fN  
fN  
fN  
fN  
fN  
±
±
±
-
17,0  
25,0  
35,0  
35,0  
MHz  
MHz  
MHz  
MHz  
MHz  
17,5  
38  
46  
55  
52  
dB  
dB  
dB  
dB  
dB  
min.  
min.  
min.  
min.  
min.  
15  
35  
40  
50  
50  
dB  
dB  
dB  
dB  
dB  
17,0  
25,0  
438,0  
35,0  
+
+
532  
28  
40  
18  
-
ns  
ns  
dB  
max.  
max.  
min.  
250  
ns  
µs  
dB  
Group delay ripple within PB  
1,5  
8
Group delay ripple within fN ± 10,0 MHz  
Return loss within fN ± 10,0 MHz  
Input power level  
max.  
max.  
15 **** dBm  
-
0
V
Permissible DC voltage  
OTR  
-
-
- 40 °C ... + 85°C  
- 40 °C ... + 85°C  
Operating temperature range  
Storage temperature range  
TC **  
-18  
ppm/K  
Temperature coefficient of frequency  
f
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference  
values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.  
**) f(Hz) = TC (ppm/K) x (T-T0) x f (MHz).  
f
cat  
***) insertion loss at 25°C max. 12,5 dB  
****) RF Source Power (peak) is max. 15dBm, RF Source Power (average) is max. 5dBm  
Generated:  
Checked / Approved:  
Vectron International GmbH & Co. KG  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@vectron.com  
Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without  
notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such  
product(s) or information.  
Filename: tfs 468l.doc  
Version 1.4  
12.06.2008  
Vectron International  
Filter specification  
TFS 468L  
2/5  
Filter characteristic  
0
0
-0.5  
-1  
2.29  
2.08  
1.87  
1.66  
1.45  
1.24  
1.03  
0.82  
0.61  
0.4  
-10  
-20  
-30  
-40  
-50  
-60  
-70  
-1.5  
-2  
-2.5  
-3  
-3.5  
-4  
-4.5  
-5  
0.19  
482  
418  
428  
438  
448  
458  
468  
478  
488  
498  
508  
518  
454  
456.8  
459.6  
462.4  
465.2  
468  
470.8  
473.6  
476.4  
479.2  
frequency in MHz  
frequency in MHz  
Construction and pin connection  
(All dimensions in mm)  
9
7
1
2
3
4
Ground  
Ground  
Ground  
Output  
Ground  
6
4
10  
12  
S 468L  
W24  
5
6
7
Output RF Return  
Ground  
1
3
8
Ground  
Date code  
9
Ground  
10  
11  
12  
Input  
Ground  
Input RF Return  
0,6  
1
Date code: Year + week  
W
X
A
2008  
2009  
2010  
...  
1
2,54  
7 ,0 +/-0,2  
50 Ohm Test circuit  
L1  
L2  
10  
12  
4
SAW  
6
C1  
C2  
1, 2, 3, 5, 7, 8, 9, 11  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 468l.doc  
Version 1.4  
12.06.2008  
Vectron International  
Filter specification  
TFS 468L  
3/5  
Stability characteristics, reliability  
After the following tests the filter shall meet the whole specification:  
1. Shock:  
500g, 1 ms, half sine wave, 3 shocks each plane;  
DIN IEC 68 T2 - 27  
2. Vibration:  
10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans;  
DIN IEC 68 T2 - 6  
3. Change of  
temperature:  
-55 °C to 125°C / 30 min. each / 10 cycles  
DIN IEC 68 part 2 – 14 Test N  
4. Resistance to  
solder heat (reflow):  
reflow possible: three times max.;  
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;  
This filter is RoHS compliant (2002/95/EG, 2005/618/EG)  
Packing  
Tape & Reel:  
IEC 286 – 3, with exception of value for N and minimum bending radius;  
tape type II, embossed carrier tape with top cover tape on the upper side;  
max. pieces of filters per reel:  
reel of empty components at start:  
reel of empty components at start including leader:  
trailer:  
3000  
min. 300 mm  
min. 500 mm  
min. 300 mm  
Pull Off Direction  
P1  
Tape (all dimensions in mm)  
Date Code  
W
: 16,00 ± 0,3  
Po  
P2  
t
Do  
Po  
Do  
E
F
G(min)  
P2  
P1  
D1(min)  
Ao  
Bo  
:
:
:
:
:
:
:
:
:
:
4,00 ± 0,1  
1,50 +0,1/-0  
1,75 ± 0,1  
7,50 ± 0,1  
0,60  
2,00 ± 0,1  
8,00 ± 0,1  
1,50  
Ko  
Typ  
PIN Marker  
D1  
Ao  
5,50 ± 0,1  
7,50 ± 0,1  
Ct  
: 13,5 ± 0,1  
W
2
Reel (all dimensions in mm)  
A
:330  
W1  
: 16,4 +2/-0  
W2(max) : 22,4  
N(min)  
C
: 50  
: 13,0 +0,5/-0,2  
C
A
N
W
1
The minimum bending radius is 45 mm.  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 468l.doc  
Version 1.4  
12.06.2008  
Vectron International  
Filter specification  
TFS 468L  
4/5  
Air reflow temperature conditions  
Conditions  
Exposure  
Average ramp-up rate (30°C to 217°C)  
> 100°C  
less than 3°C/second  
between 300 and 600 seconds  
> 150°C  
> 217°C  
Peak temperature  
between 240 and 500 seconds  
between 30 and 150 seconds  
max. 260°C  
Time within 5°C of actual peak temperature  
Cool-down rate (Peak to 50°C)  
Time from 30°C to Peak temperature  
between 10 and 30 seconds  
less than 6°C/second  
no greater than 300 seconds  
Chip-mount air reflow profile  
Temperature / °C  
max. 260°C  
217°C  
Time / s  
max. 300 s  
10 ... 30 s  
30 ... 150 s  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 468l.doc  
Version 1.4  
12.06.2008  
Vectron International  
Filter specification  
TFS 468L  
5/5  
History  
Version  
1.0  
Reason of Changes  
Name  
Strehl  
Chilla  
Date  
- Generation of development specification  
12.04.2007  
11.05.2007  
1.1  
- created filter specification  
- added terminating impedances  
- added typical values  
- added filter characteristic  
- added test circuit  
1.2  
- changed input power level  
Chilla  
15.10.2007  
- changed max. input power level  
- changed operating temperature range  
- changed relative attenuation  
- changed filter characteristic  
- tape and reel direction adjusted to Motorola standard  
1.3  
1.4  
- tape and reel direction adjusted to Telefilter standard  
Strehl  
Strehl  
14.01.2008  
12.06.2008  
- chanded input power level and relative attenuation  
- add permissible DC voltage  
- loss reduced  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  

相关型号:

TFS468M

Filter specification
VECTRON

TFS469

Specification
VECTRON

TFS471

Filter Specification
VECTRON

TFS471A

Filter Specification
VECTRON

TFS471A1

Filter Specification
VECTRON

TFS471B

Filter specification
VECTRON

TFS471C

Filter Specification
VECTRON

TFS471D

Filter specification
VECTRON

TFS482

Filter specification
VECTRON

TFS491A

Filter specification
VECTRON

TFS498

Filter specification
VECTRON

TFS500

Filter specification
VECTRON