TFS482 [VECTRON]
Filter specification; 过滤器规格
| 型号： | TFS482 |
| 厂家： | 
Vectron International, Inc |
| 描述： | Filter specification |
| 文件： | 总5页 (文件大小：256K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Filename: tfs 482.doc
Version 1.5
11.07.2006
VI TELEFILTER
Filter specification
TFS 482
1/5
Measurement condition
Ambient temperature:
Input power level:
Terminating impedance:
Input:
23
0
°C
dBm
50
50
Ω
Ω
Output:
Characteristics
Remark:
The maximum attenuation in the pass band is defined as the insertion loss a . The nominal frequency fN is fixed at 482 MHz without any tolerance or limit.
e
The values of absolute attenuation a
are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating
abs
temperature range is included in the production tolerance scheme.
D a t a
typ. Value
tolerance / limit
Insertion loss within PB
a
e
2,3
-
dB
max.
3,0
482
dB
fN
MHz
MHz
Nominal frequency
Passband
PB
24
a
Absolute attenuation
abs
fN
fN
fN
fN
fN
fN
±
80
MHz ...
MHz ...
±
+
-
149
MHz
51
dB
min.
33,5
dB
+
149
1
300
200
MHz
MHz
48
61
dB
dB
min.
min.
45,0
50,0
dB
dB
MHz
MHz
…
…
200
149
MHz
67
12
-
dB
ns
min.
max.
min.
max.
55,0
0,2
36
dB
-
Group delay ripple within PB
p-p
µs
IIP3
*
dBm
dBm
Input power level
-
10
Operating temperature range
Storage temperature range
OTR
-
-
- 10 °C ... + 75 °C
- 40 °C ... + 85 °C
-
Temperature coefficient of frequency
TC **
-76
ppm/K
f
*) fin1= fC - 14 MHz; fin2= fC – 14,4 MHz; Pin=0 dBm; fmeasurement1 = fC - 13,6 MHz; fmeasurement2 = fC - 14,8 MHz; The centre frequency f is the arithmetic mean
c
value of the upper and lower frequencies at the 3 dB filter attenuation level relative to the insertion loss a .
e
**) ∆ f(Hz) =TCf(ppm/K) x(T-T0) x fTo (MHz)
Generated:
Checked / Approved:
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 482.doc
Version 1.5
11.07.2006
VI TELEFILTER
Filter specification
TFS 482
2/5
Filter characteristic
0
0
-1
0.5
-10
-20
-30
-40
-50
-60
-70
-80
-90
-100
0.45
0.4
-2
0.35
0.3
-3
-4
-5
0.25
0.2
-6
-7
0.15
0.1
-8
-9
0.05
-10
0
100
200
300
400
500
600
700
800
900
1000
460
465
470
475
480
485
490
495
500
505
frequency in MHz
frequency in MHz
Construction and pin connection
(All dimensions in mm)
7
5
1
2
3
4
5
6
7
8
Ground
Input
Ground
Ground
Ground
Output
Ground
Ground
482
● U28
1
3
Date code
2,54
1
3
Date code: Year + week
U
V
W
...
2006
2007
2008
d
%
%
0
2
1
7
5
1,78
50 Ω Test circuit
L1
2
6
L2
SAW
1, 3, 4, 5, 7, 8
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 482.doc
Version 1.5
11.07.2006
VI TELEFILTER
Filter specification
TFS 482
3/5
Stability characteristics, reliability
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 1 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Change of
temperature:
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
4. Resistance to
solder heat (reflow):
reflow possible: three times max.;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
This filter is RoHS compliant (2002/95/EG, 2005/618/EG)
Packing
Tape & Reel:
IEC 286 – 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer:
3000
min. 300 mm
min. 500 mm
min. 300 mm
Pull Off Direction
P1
Tape (all dimensions in mm)
Date Code
W
: 12,00 ± 0,3
Po
P2
t
Do
Po
Do
E
F
G(min)
P2
P1
D1(min)
Ao
Bo
:
:
:
:
:
:
:
:
:
:
:
4,00 ± 0,1
1,50 +0,1/-0
1,75 ± 0,1
5,50 ± 0,05
0,75
2,00 ± 0,05
8,00 ± 0,1
1,50
Ko
Typ
PIN Marker
D1
Ao
4,30 ± 0,1
4,30 ± 0,1
9,5 ± 0,1
Ct
W
2
Reel (all dimensions in mm)
A
:330
W1
: 12,4 +2/-0
W2(max) : 18,4
N(min)
C
: 50
: 13,0 +0,5/-0,2
C
A
N
W
1
The minimum bending radius is 45 mm.
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 482.doc
Version 1.5
11.07.2006
VI TELEFILTER
Filter specification
TFS 482
4/5
Air reflow temperature conditions
Conditions
Exposure
Average ramp-up rate (30°C to 217°C)
> 100°C
less than 3°C/second
between 300 and 600 seconds
> 150°C
> 217°C
Peak temperature
between 240 and 500 seconds
between 30 and 150 seconds
max. 260°C
Time within 5°C of actual peak temperature
Cool-down rate (Peak to 50°C)
Time from 30°C to Peak temperature
between 10 and 30 seconds
less than 6°C/second
no greater than 300 seconds
Chip-mount air reflow profile
Temperature / °C
max. 260°C
217°C
Time / s
max. 300 s
10 ... 30 s
30 ... 150 s
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 482.doc
Version 1.5
11.07.2006
VI TELEFILTER
Filter specification
TFS 482
5/5
History
Version
1.0
Reason of Changes
Generation of development specification
Name
Date
9.12.2003
Roizengaft
Roizengaft
1.1
Change of relative attenuation
change of insertion loss
12.02.2004
add of network matching
1.2
1.3
Add attenuation at fN - 338 MHz … fN - 362 MHz
Dr. Wall
Strehl
16.02.2004
20.01.2005
Change of absolute attenuation fN+149…300MHz
change insertion loss
1.4
1.5
Change stability characteristics
add typical values and filter characteristic
generation of filter specification
Strehl
Strehl
09.05.2005
11.07.2006
Add IIP3 and change stability characteristics
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
相关型号：
©2020 ICPDF网 联系我们和版权申明