TFS500 [VECTRON]
Filter specification; 过滤器规格型号: | TFS500 |
厂家: | Vectron International, Inc |
描述: | Filter specification |
文件: | 总5页 (文件大小:164K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Filename: tfs 500.doc
Version 1.3
28.04.2006
VI TELEFILTER
Filter specification
TFS 500
1/5
Measurement condition
Ambient temperature:
Input power level:
Terminating impedance: *
Input:
23
0
°C
dBm
415 Ω || -1 pF
415 Ω || -1 pF
33 nH
Output:
External Coil:
Characteristics
Remark:
The reference level for the relative attenuation a of the TFS 500 is the minimum of the pass band attenuation. This value is defined as the insertion loss
rel
a . The nominal frequency f is fixed at 500,0 MHz without any tolerance. The values of relative attenuation a are guaranteed for the whole operating
e
N
rel
temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme.
D a t a
typ. value
tolerance / limit
a
4,4
dB
max.
5,0
dB
Insertion loss
(reference level)
e
fN
500,0
MHz
Nominal frequency
Passband
PB
390
1,3
kHz
dB
fN
±
0,1 MHz
max.
2,0
dB
Pass band variation
Relative attenuation
a
rel
fN
fN
fN
fN
-
-
-
+
100
90
60
1
MHz
MHz
MHz
MHz
…
…
…
…
fN
fN
fN
fN
-
-
-
+
90
60
1
MHz
48
dB
dB
dB
dB
min.
min.
min.
min.
40
dB
dB
dB
dB
MHz
MHz
MHz
42
47
42
38
40
40
100
-
max.
10
dBm
Input power level
OTR
-
-
- 40 °C …+ 85°C
- 40 °C ... + 85°C
Operating temperature range
Storage temperature range
41
°C
Frequency inversion temperature
Temperature coefficient of frequency
TC **
- 0,036 ppm/K2
f
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference
values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.
**) ∆f (Hz) = TCf(ppm/K2) x (T - To)2 x fTo (MHz).
c
Generated:
Checked / Approved:
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 500.doc
Version 1.3
28.04.2006
VI TELEFILTER
Filter specification
TFS 500
2/5
Filter characteristic
0
-0.5
-1
0
-10
-20
-30
-40
-50
-60
-1.5
-2
-2.5
-3
5
-3.5
-4
-4.5
-5
0
496
497
498
499
500
501
502
503
504
505
499.7
499.8
499.9
500
500.1
500.2
500.3
500.4
frequency in MHz
frequency in MHz
Construction and pin connection
(All dimensions in mm)
7
5
1
2
3
4
5
6
7
8
Input
Input RF Return
External Coil
Ground
Output
Output RF Return
Ground
500
● U08
1
Ground
3
Date code
2,54
1
3
Date code: Year + week
d
%
T
2005
2006
2007
%
0
2
1
U
V
...
7
5
1,78
50 Ω Test circuit
5
1
3
2, 4, 6, 7, 8
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 500.doc
Version 1.3
28.04.2006
VI TELEFILTER
Filter specification
TFS 500
3/5
Stability characteristics, reliability
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 1 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Change of
temperature:
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
4. Resistance to
solder heat (reflow):
reflow possible: twice max.;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
This filter is RoHS compliant (2002/95/EG, 2005/618/EG)
Packing
Tape & Reel:
IEC 286 – 3, with exeption of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters peer reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer:
3000
min. 300 mm
min. 500 mm
min. 300 mm
Pull Off Direction
P1
Tape (all dimensions in mm)
Date Code
W
: 12,00 ± 0,3
Po
P2
t
Do
Po
Do
E
F
G(min)
P2
P1
D1(min)
Ao
Bo
:
:
:
:
:
:
:
:
:
:
:
4,00 ± 0,1
1,50 +0,1/-0
1,75 ± 0,1
5,50 ± 0,05
0,75
2,00 ± 0,05
8,00 ± 0,1
1,50
Ko
Typ
PIN Marker
D1
Ao
4,30 ± 0,1
4,30 ± 0,1
9,5 ± 0,1
Ct
W
2
Reel (all dimensions in mm)
A
:330
W1
: 12,4 +2/-0
W2(max) : 18,4
N(min)
C
: 50
: 13,0 +0,5/-0,2
C
A
N
W
1
The minimum bending radius is 45 mm.
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 500.doc
Version 1.3
28.04.2006
VI TELEFILTER
Filter specification
TFS 500
4/5
Air reflow temperature conditions
Conditions
Exposure
Average ramp-up rate (30°C to 217°C)
> 100°C
less than 3°C/second
between 300 and 600 seconds
> 150°C
> 217°C
Peak temperature
between 240 and 500 seconds
between 30 and 150 seconds
max. 260°C
Time within 5°C of actual peak temperature
Cool-down rate (Peak to 50°C)
Time from 30°C to Peak temperature
between 10 and 30 seconds
less than 6°C/second
no greater than 300 seconds
Chip-mount air reflow profile
Temperature / °C
max. 260°C
217°C
Time / s
max. 300 s
10 ... 30 s
30 ... 150 s
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 500.doc
Version 1.3
28.04.2006
VI TELEFILTER
Filter specification
TFS 500
5/5
History
Version Reason of Changes
Name
Date
1.0
1.1
- Generation of development specification
Strehl
10.11.2005
21.11.2005
- Add operating temperature range
Channaa
- Add frequency inversion temperature
1.2
1.3
- Add typical values
- Add filter characteristic
- Add test circuit
Martens
Alawneh
23.02.2006
28.04.2006
- Add terminating impedances
- Change from development specification to filter specification
- Change relative attenuation
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
相关型号:
©2020 ICPDF网 联系我们和版权申明