TFS468M [VECTRON]

Filter specification; 过滤器规格
TFS468M
型号: TFS468M
厂家: Vectron International, Inc    Vectron International, Inc
描述:

Filter specification
过滤器规格

过滤器 LTE
文件: 总5页 (文件大小:252K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Filename: tfs 468m.doc  
Version 1.6  
16.06.2008  
VI TELEFILTER  
Filter specification  
TFS 468M  
1/5  
Measurement condition  
Ambient temperature:  
Input power level:  
Terminating impedance: *  
Input:  
23  
0
°C  
dBm  
675 || -3,8 pF  
685 || -3,8 pF  
Output:  
Characteristics  
Remark:  
The reference level for the relative attenuation a of the TFS 468M is the minimum of the pass band attenuation. This value is defined as the insertion  
rel  
loss a . The nominal frequency f is fixed at 468,0 MHz without any tolerance. The values of relative attenuation a  
operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme.  
are guaranteed for the whole  
e
N
rel  
D a t a  
typ. value  
tolerance / limit  
a
9,2  
dB  
max.  
14,0*** dB  
Insertion loss  
(reference level)  
e
fN  
-
468  
-
MHz  
Nominal frequency  
Centre frequency  
fC  
468  
MHz  
PB  
-
fN  
±
4,9  
MHz  
dB  
Passband  
0,3  
0,3  
dB  
dB  
max.  
max.  
1,0  
2,5  
Pass band ripple  
Amplitude ripple within fN ± 5,0 MHz  
Bandwidth  
dB  
BW  
1
dB  
11,2  
dB  
min.  
9,8  
MHz  
a
Relative attenuation  
rel  
f
f
±
±
4,9  
5
MHz  
0,6  
1
dB  
dB  
max.  
max.  
1,0  
2,5  
dB  
dB  
fNN  
fN  
fN  
fN  
fN  
fN  
±
±
±
±
-
4,9  
8,5  
12  
20  
438  
30  
MHz  
MHz  
MHz  
MHz  
MHz  
MHz  
fNN  
MHz  
MHz  
MHz  
MHz  
MHz  
MHz  
fN  
fN  
fN  
fN  
fN  
±
±
±
-
12  
20  
30  
30  
532  
20  
40  
47  
56  
56  
dB  
dB  
dB  
dB  
dB  
min.  
min.  
min.  
min.  
min.  
15  
dB  
dB  
dB  
dB  
dB  
35  
40  
50  
50  
+
+
60  
ns  
max.  
max.  
min.  
250  
ns  
µs  
dB  
Group delay ripple within PB  
0,08  
µs  
1,5  
Group delay ripple within fN ± 5,0 MHz  
Return loss within fN ± 5,0 MHz  
Input power level  
12  
20  
dB  
8
dBm  
max.  
15**** dBm  
OTR  
-
-
- 40 °C ... + 85 °C  
- 45 °C ... + 85 °C  
Operating temperature range  
Storage temperature range  
TC **  
-17  
ppm/K  
Temperature coefficient of frequency  
f
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference  
values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.  
**) f(Hz) = TC (ppm/K) x (T-T0) x f (MHz).  
f
cat  
***) insertion loss at 25°C max. 12,5 dB  
****) RF Source Power (peak) is max. 15dBm, RF Source Power (average) is max. 5dBm  
Generated:  
Checked / Approved:  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@vectron.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 468m.doc  
Version 1.6  
16.06.2008  
VI TELEFILTER  
Filter specification  
TFS 468M  
2/5  
Filter characteristic  
0
0
-1  
-2  
-3  
-4  
-5  
-6  
-7  
-8  
-9  
8.59  
7.69  
6.79  
5.89  
4.99  
4.09  
3.19  
2.29  
1.39  
0.49  
-7  
-14  
-21  
-28  
-35  
-42  
-49  
-56  
-63  
-70  
-10  
-0.41  
478  
458  
460  
462  
464  
466  
468  
470  
472  
474  
476  
368  
388  
408  
428  
448  
468  
488  
508  
528  
548  
568  
frequency in MHz  
frequency in MHz  
Construction and pin connection  
(All dimensions in mm)  
9
7
1
2
3
4
Ground  
Ground  
Ground  
Output  
Ground  
10  
12  
S 468M  
W03  
5
6
7
Output RF Return  
Ground  
1
3
8
9
Ground  
Ground  
Date code  
10  
11  
12  
Input  
Ground  
Input RF Return  
0,6  
1
Date code: Year + week  
W
X
A
2008  
2009  
2010  
...  
1
2,54  
7 ,0 +/-0,2  
50 Ohm Test circuit  
L2  
10  
12  
4
6
C3  
SAW  
C2  
L1  
C
1, 2, 3, 5, 7, 8, 9, 11  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 468m.doc  
Version 1.6  
16.06.2008  
VI TELEFILTER  
Filter specification  
TFS 468M  
3/5  
Stability characteristics, reliability  
After the following tests the filter shall meet the whole specification:  
1. Shock:  
500g, 1 ms, half sine wave, 3 shocks each plane;  
DIN IEC 68 T2 - 27  
2. Vibration:  
10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans;  
DIN IEC 68 T2 - 6  
3. Change of  
temperature:  
-55 °C to 125°C / 30 min. each / 10 cycles  
DIN IEC 68 part 2 – 14 Test N  
4. Resistance to  
solder heat (reflow):  
reflow possible: three times max.;  
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;  
This filter is RoHS compliant (2002/95/EG, 2005/618/EG)  
Packing  
Tape & Reel:  
IEC 286 – 3, with exception of value for N and minimum bending radius;  
tape type II, embossed carrier tape with top cover tape on the upper side;  
max. pieces of filters per reel:  
reel of empty components at start:  
reel of empty components at start including leader:  
trailer:  
3000  
min. 300 mm  
min. 500 mm  
min. 300 mm  
Pull Off Direction  
P1  
Tape (all dimensions in mm)  
Date Code  
W
: 16,00 ± 0,3  
Po  
P2  
t
Do  
Po  
Do  
E
F
G(min)  
P2  
P1  
D1(min)  
Ao  
Bo  
:
:
:
:
:
:
:
:
:
:
4,00 ± 0,1  
1,50 +0,1/-0  
1,75 ± 0,1  
7,50 ± 0,1  
0,60  
2,00 ± 0,1  
8,00 ± 0,1  
1,50  
Ko  
Typ  
PIN Marker  
D1  
Ao  
5,50 ± 0,1  
7,50 ± 0,1  
Ct  
: 13,5 ± 0,1  
W
2
Reel (all dimensions in mm)  
A
:330  
W1  
: 16,4 +2/-0  
W2(max) : 22,4  
N(min)  
C
: 50  
: 13,0 +0,5/-0,2  
C
A
N
W
1
The minimum bending radius is 45 mm.  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 468m.doc  
Version 1.6  
16.06.2008  
VI TELEFILTER  
Filter specification  
TFS 468M  
4/5  
Air reflow temperature conditions  
Conditions  
Exposure  
Average ramp-up rate (30°C to 217°C)  
> 100°C  
less than 3°C/second  
between 300 and 600 seconds  
> 150°C  
> 217°C  
Peak temperature  
between 240 and 500 seconds  
between 30 and 150 seconds  
max. 260°C  
Time within 5°C of actual peak temperature  
Cool-down rate (Peak to 50°C)  
Time from 30°C to Peak temperature  
between 10 and 30 seconds  
less than 6°C/second  
no greater than 300 seconds  
Chip-mount air reflow profile  
Temperature / °C  
max. 260°C  
217°C  
Time / s  
max. 300 s  
10 ... 30 s  
30 ... 150 s  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 468m.doc  
Version 1.6  
16.06.2008  
VI TELEFILTER  
Filter specification  
TFS 468M  
5/5  
History  
Version  
1.0  
Reason of Changes  
- Generation of development specification  
- Correct construction  
Name  
Date  
Strehl  
Strehl  
07.05.2007  
05.07.2007  
1.1  
1.2  
- add of terminating impedances, typical values, filter characteristics and matching configuration  
Pfeiffer 07.09.2007  
- change of limits:  
insertion loss: max. 12 dB  
relative attenuation: at fN ± 7,5 MHz….fN ± 12 MHz Î min. 15 dB  
lower stop band:  
at fN - 180 MHz….fN - 150 MHz Î min. 47 dB  
1.3  
1.4  
- correction of terminating impedances and matching configuration  
Pfeiffer 14.09.2007  
Pfeiffer 15.10.2007  
- change of relative attenuation :  
at fN - 180 MHz….fN - 150 MHz Î min. 50 dB  
- tape and reel direction adjusted to Motorola standard  
1.5  
1.6  
- tape and reel direction adjusted to Telefilter standard  
Strehl  
14.01.2008  
- rel. attenuation changed to be conform with Motorola  
- loss updated  
Strehl 16.6.08  
- power limits updated  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  

相关型号:

TFS469

Specification
VECTRON

TFS471

Filter Specification
VECTRON

TFS471A

Filter Specification
VECTRON

TFS471A1

Filter Specification
VECTRON

TFS471B

Filter specification
VECTRON

TFS471C

Filter Specification
VECTRON

TFS471D

Filter specification
VECTRON

TFS482

Filter specification
VECTRON

TFS491A

Filter specification
VECTRON

TFS498

Filter specification
VECTRON

TFS500

Filter specification
VECTRON

TFS500A

Filter specification
VECTRON