MADR-008888-0002TB [TE]
HMICTM PIN Diode SP2T 20 Watt Switch; HMICTM PIN二极管SP2T 20瓦开关
| 型号： | MADR-008888-0002TB |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | HMICTM PIN Diode SP2T 20 Watt Switch |
| 文件： | 总8页 (文件大小：213K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MASW-000825-12770T
HMICTM PIN Diode SP2T 20 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V4
Features
Functional Diagram (TOP VIEW)
Exceptional Broadband Performance, 0.05 - 6.0 GHz
Low Loss: Tx = 0.24 dB Avg @ 2025 MHz, 35mA
High Isolation: Rx = 31.0 dB Avg @ 2025 MHz
Rx = 27 dB Avg @ 3500 MHz
Tx = 0.38 dB Avg @ 3500 MHz, 35mA
High RF C.W. Input Power: 20 W C.W. (Tx-Ant Port)
Higher IIP3: > 64 dBm (Tx-Ant Port )
Suitable for High Power TD-SCDMA & WiMAX
Applications
Surface Mount 3mm PQFN Package
RoHS* Compliant and 260°C Re-flow Compatible
Description and Applications
The MASW-000825-12770T is a compact SP2T PIN diode
switch in a lead-free 3mm MLP plastic package that offers
extraordinary performance with excellent isolation to
loss ratio for both TX and RX states. The SP2T provides
outstanding 20 W C.W. power handling coupled with 64
dBm IIP3 for maximum switch performance.
Circuit Side View
The MASW-000825-12770T is a 0.05 - 6.0GHz SP2T High
Peak and Average Power PIN diode switch used for T/R or
LNA Protect Switch applications such as WiMAX and TD-
SCDMA.
This device incorporates a PIN diode die fabricated with
M/A-COM Technology Solutions patented Silicon-Glass
HMICTM process. This chip features two silicon pedestals
embedded in a low loss, low dispersion glass. The diodes
are formed on the top of each pedestal. The topside is fully
encapsulated with silicon nitride and has an additional
polymer passivation layer. These polymer protective
coatings prevent damage and contamination during han-
dling and assembly.
Pin Configuration:
(Center Metal Area is RF, D.C., and Thermal Ground)
PIN
1
Function
N/C
PIN
9
Function
GND
Rx
2
GND
TX
10
11
12
13
14
15
16
3
GND
N/C
Ordering Information
4
GND
N/C
Part Number
Package
5
GND
Ant
6
N/C
MASW-000825-12770T
MASW-000825-001SMB
1000 piece reel
Sample Board
7
N/C
GND
N/C
8
N/C
Sample Board with recommended
external Driver & MASW-000825-
12770T Switch
MADR-008888-0002TB
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASW-000825-12770T
HMICTM PIN Diode SP2T 20 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V4
Electrical Specifications at +25°C, Characteristic Impedance Z0 = 50 Ω, 35mA/28V
Parameter
F = 2.0-2.7 GHz
Insertion Loss, Rx
Insertion Loss, Tx
Symbol
35mA / 28V Conditions
Units
Min.
Typ.
Max.
Rx, IL
Tx, IL
Bias: See Table Below, Pinc= 0 dBm
Bias: See Table Below, Pinc= 0 dBm
dB
dB
0.42
0.29
0.55
0.38
Isolation, Tx To Rx
Rx, ISO
Bias: See Table Below, Pinc= 0 dBm
dB
24.5
21.3
28.6
Isolation, Rx To Tx
Tx, ISO
Tx, RL
Bias: See Table Below, Pinc= 0 dBm
Bias: See Table Below, Pinc= 0 dBm
dB
dB
24.2
- 28
Tx Input Return Loss
Rx Input Return Loss
Rx, RL
Bias: See Table Below, Pinc= 0 dBm
dB
- 28
F = 3.3-3.8 GHz
Insertion Loss, Rx
Insertion Loss, Tx
Isolation, Tx To Rx
Isolation, Rx To Tx
Tx Input Return Loss
Rx Input Return Loss
F = 4.9-5.9 GHz
Rx,IL
Tx, IL
Bias: See Table Below, Pinc= 0 dBm
Bias: See Table Below, Pinc= 0 dBm
Bias: See Table Below, Pinc= 0 dBm
Bias: See Table Below, Pinc= 0 dBm
Bias: See Table Below, Pinc= 0 dBm
Bias: See Table Below, Pinc= 0 dBm
dB
dB
dB
dB
dB
dB
0.56
0.38
26
0.71
0.48
Rx, ISO
Tx, ISO
Tx, RL
Rx, RL
22
19.7
21.6
- 28
-28
Insertion Loss, Rx
Insertion Loss, Tx
Isolation, Tx To Rx
Isolation, Rx To Tx
Tx Input Return Loss
Rx Input Return Loss
Rx, IL
Tx, IL
Bias: See Table Below, Pinc= 0 dBm
Bias: See Table Below, Pinc= 0 dBm
Bias: See Table Below, Pinc= 0 dBm
Bias: See Table Below, Pinc= 0 dBm
Bias: See Table Below, Pinc= 0 dBm
Bias: See Table Below, Pinc= 0 dBm
dB
dB
dB
dB
dB
dB
0.95
0.59
22.4
18.5
- 25
- 24
1.10
0.71
Rx, ISO
Tx, ISO
Tx, RL
Rx, RL
19.5
16.5
Port
Pin
Tx
Rx
ANT
Pin 14
Pin 3
Pin 10
Tx-ANT Isolation
+28V @ 0 ma
0V
+ 5V @ 35 mA
+ 5V @ 35 mA
+ 5V @ 35 mA
+ 5V @ 35 mA
Tx-ANT Insertion Loss
Rx-ANT Isolation
0V
+28V @ 0 ma
+28V @ 0 ma
0V
0V
Rx-ANT Insertion Loss
+28V @ 0 ma
2
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASW-000825-12770T
HMICTM PIN Diode SP2T 20 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V4
Electrical Specifications at +25°C, Characteristic Impedance, Z0 = 50 Ω
Parameter
Symbol
Conditions
Units
Min
Typ
Max
Fo=2.010 GHz, Tx = +5.0 V@ +35mA,
Rx =+28V @ 0mA
Tx
2Fo
Tx 2nd Harmonic
dBc
70
Pin = + 30 dBm, Tx To Antenna
Fo= 2.010 GHz, Tx = +5.0 V@ +35mA,
Rx =+28V @ 0mA
Tx
3Fo
Tx 3rd Harmonic
dBc
86
64
Pin = + 30 dBm, Tx To Antenna
Tx = +5.0 V@ +35mA, Rx =+28V @ 0mA
Pi= +20 dBm,
Tx Input Third Order Inter-
cept Point
Tx
IIP3
dBm
F1 = 2.010 GHz, F2 = 2.020 GHz,
Tx To Antenna
Tx = +5.0 V@ +35mA,
Rx =+28V @ 0mA
F = 2.010, 3.500 GHz, Tx To Antenna
Tx
CW Pinc
dBm
W
43
20
2
Tx C.W. Input Power
Tx = +5.0 V@ +35mA,
Rx =+28V @ 0mA
F = 2.010 GHz, Tx To Antenna
( 5 μS RF Pulse Width, 1% Duty 1.10:1 Ant
VSWR )
Tx
Pk Pinc
dBm
W
53
200
Tx Peak Input Power
Rx
CW Pinc
Rx = +5.0 V@ +35mA, Tx =+28V @ 0mA
F = 2.010 GHz, Antenna to Rx
dBm
W
39
8
Rx C.W. Input Power
Tx Input P1dB
Tx = +5.0 V@ +35mA,
Rx =+28V @ 0mA
F = 2.010, GHz, Tx To Antenna
Tx
P1dB
dBm
>43
( 10% - 90% RF Voltage)
Tx = +5.0 V@ +35mA, Rx =+28V @ 0mA
F = 2.010 GHz, Tx To Antenna
Tx RF Switching Speed
ns
200
RF
1MHz Rep Rate in Modulating Mode
Absolute Maximum Ratings 1
Handling Procedures
Please observe the following precautions to avoid
damage:
@ TA = +25 °C (unless otherwise specified)
Parameter
Forward Current
Absolute Maximum
100 mA
Static Sensitivity
These devices are rated Class 1B Human Body.
Proper ESD control techniques should be used
when handling these devices.
Reverse Voltage ( RF & D.C. )
Operating Temperature
-140 V
-40 °C to +85 °C
Storage Temperature
Junction Temperature
-55 °C to +150 °C
+175 °C
2
20 W C.W.
Tx Incident C.W. Power
Tx Peak Incident Power
With 3.0:1 Maximum Ant VSWR
150 W, 5 uS P.W., 1% Duty
1. Exceeding these limits may cause permanent damage.
2. Refer to page 7 of the datasheet for power handling curves.
3
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASW-000825-12770T
HMICTM PIN Diode SP2T 20 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V4
D.C. Bias to RF Truth Table
RF State
TTL & D.C. Bias Conditions
Voltage at Common Anode
Low Loss Tx-Ant &
Isolation Tx-Rx
TTL = 1
+ 0.9 V
+ 0.9 V
+ 5V @ 35 mA ( Tx ), + 28V @ 0 mA ( Rx )
Low Loss Ant-Rx &
Isolation Rx-Tx
TTL = 0
+ 5V @ 35 mA ( Rx ), + 28V @ 0 mA ( Tx )
Driver and SP2T Schematic with Positive Voltage
Ant
DC Block
LBias
R5
+5 V
180 Ω
Bypass
DC Block
DC Block
TX
RX
SP2T
Bypass
LBias
LBias
Bypass
MADR-008888-000100
Driver
Logic Input
Ground
Notes:
1. Data is taken on M/A-COM evaluation board 1000029181-0000001 @ 25C by removing peripheral
board losses ( connectors, transmission line, and bias elements ).
2. Typical PIN Diode Forward Voltage = + 0.9 V @ + 35 mA for Insertion Loss.
Typical PIN Diode Reverse Voltage = 28 V – 1.0 V = 27 V for Isolation.
3. Switch is Asymmetrical, + 43 dBm RF C.W. Input Power Applies to Tx Port Only.
4. Center Ground Area of MLP 3mm Package must be Attached to Thermal Ground for Optimum RF
Power Performance.
5. M/A-Com Recommends the usage of the MADR-008888-000100 driver with this switch.
Assembly Note:
A typical soldering process profile and handling instructions are provided in Application Notes, S2083
“Surface Mount Instructions for QFN / DFN Packages” on the M/A-Com website at www.macomtech.com
4
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASW-000825-12770T
HMICTM PIN Diode SP2T 20 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V4
Typical Small Signal Performance at +25°C, Characteristic Impedance, Z0 = 50 Ω
MASW-000825-1277OT, TX/RX Insertion Loss
Bias:+5V @ 35mA
MASW-000825-1277OT, TX/RX Isolation
Bias:+28V @ 0mA
0.0
-0.1
-0.2
-0.3
-0.4
-0.5
-0.6
-0.7
-0.8
-15.0
-20.0
-25.0
-30.0
-35.0
-40.0
-45.0
-50.0
-55.0
TX
RX
TX
RX
0.0
1.0
2.0
3.0
4.0
5.0
6.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
Frequency (GHz)
Frequency (GHz)
MASW-000825-1277OT, TX/RX Return Loss
Bias:+5V @ 35mA
0.0
-5.0
-10.0
-15.0
-20.0
-25.0
-30.0
-35.0
-40.0
TX
RX
0.0
1.0
2.0
3.0
4.0
5.0
6.0
Frequency (GHz)
5
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASW-000825-12770T
HMICTM PIN Diode SP2T 20 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V4
Typical Small Signal Performance over Temperature Characteristic Impedance,
Z0 = 50 Ω
MASW-000825-1277OT, TX to Antenna
TX Diode Tj Vs. Bias Current
MASW-000825-1277OT, TX to Antenna
Bias: TX= +5V @ 20mA and 30mA, RX = +25V @ 0mA, Fo = 2010 MHz
Maximum Pin Vs. PCB/Heatsink Temperature Vs. Bias Current
Bias: +5V @ 20mA and 30mA, RX = +25V @ 0mA, Fo = 2010 MHz
44.0
PCB Temperature is +25ºC
200.0
175.0
43.5
150.0
43.0
42.5
42.0
41.5
41.0
40.5
40.0
20mA
35mA
20mA
35mA
125.0
100.0
75.0
50.0
25.0
0.0
30.0
32.0
34.0
36.0
38.0
40.0
42.0
44.0
25.0
35.0
45.0
55.0
65.0
75.0
85.0
Pin (dBm)
PCB/Heatsink Temperature (ºC)
MASW-000825-1277OT, TX Insertion Loss Vs. Temperature
Bias:+5V @ 35mA
MASW-000825-1277OT, RX Insertion Loss Vs. Temperature
Bias:+5V @ 35mA
0.0
0.0
-0.1
-0.2
-0.3
-0.4
-0.5
-0.6
-0.7
-0.8
-0.1
-0.2
-0.3
-0.4
-0.5
-0.6
-0.7
-0.8
+25ºC
-40ºC
+85ºC
+25ºC
-40ºC
+85ºC
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Frequency (GHz)
Frequency (GHz)
6
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASW-000825-12770T
HMICTM PIN Diode SP2T 20 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V4
Typical Small Signal Performance over temperature Characteristic Impedance,
Z0 = 50 Ω
MASW-000825-1277OT, RX Isolation Vs. Temperature
Bias:+28V @ 0mA
Bias:+5V @ 35mA
MASW-000825-1277OT, TX Insertion Loss Vs. Temperature
-15.0
0.0
-20.0
-0.1
-25.0
-0.2
-30.0
-0.3
-35.0
-0.4
-40.0
-45.0
-50.0
-55.0
+25ºC
-40ºC
+85ºC
-0.5
-0.6
-0.7
-0.8
+25ºC
-40ºC
+85ºC
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Frequency (GHz)
Frequency (GHz)
MASW-000825-1277OT, RX Return Loss Vs. Temperature
Bias:+5V @ 35mA
MASW-000825-1277OT, TX Return Loss Vs. Temperature
Bias:+5V @ 35mA
-20.0
-25.0
-30.0
-35.0
-40.0
-20.0
-25.0
-30.0
-35.0
-40.0
+25ºC
-40ºC
+85ºC
+25ºC
-40ºC
+85ºC
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Frequency (GHz)
Frequency (GHz)
7
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASW-000825-12770T
HMICTM PIN Diode SP2T 20 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V4
MASW-000825-12770T Outline† – Lead Free 3mm PQFP-N 16 Lead Saw Singulated
ANT Port
PIN 14
TX Port
PIN 3
RX Port
PIN 10
ANT Port
PIN 14
† Reference Application Note S2083 for lead-free solder reflow recommendations.
Meets JEDEC moisture sensitivity level 1 requirements.
8
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
相关型号：
©2020 ICPDF网 联系我们和版权申明