MADR-009190-000100_V4 [TE]
Quad Driver for GaAs FET or PIN Diode; 四驱动程序的GaAs FET或PIN二极管型号: | MADR-009190-000100_V4 |
厂家: | TE CONNECTIVITY |
描述: | Quad Driver for GaAs FET or PIN Diode |
文件: | 总8页 (文件大小:203K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MADR-009190-000100
Quad Driver for GaAs FET or PIN Diode
Switches and Attenuators
Rev. 4
Functional Schematic
Features
• High Voltage CMOS Technology
•
•
•
•
•
•
•
Four Channel
Positive Voltage Control
CMOS device using TTL input levels
Low Power Dissipation
Low Cost Lead-Free SOIC-16 Plastic Package
Halogen-Free “Green” Mold Compound
RoHS* Compliant and 260°C Reflow Compatible
Description
The MADR-009190-000100 is a four channel driver
used to translate TTL control inputs into gate control
voltages for GaAs FET microwave switches and
attenuators. High speed analog CMOS technology
is utilized to achieve low power dissipation at
moderate to high speeds, encompassing most
microwave switching applications. The output HIGH
level is optionally 0 to +2.0V (relative to GND) to
optimize the intermodulation products of FET control
devices at low frequencies. For driving PIN Diode
circuits, the outputs are nominally switched between
+5V & -5V. The actual driver output voltages will be
lower when driving large currents due to the resis-
tance of the output devices.
Pin Configuration 3
Pin No.
Function
VEE
Pin No.
9
Function
Output A1
Output B1
Output A2
Output B2
Output A3
Output B3
Output A4
Output B4
1
2
3
4
5
6
7
8
Ordering Information1
VCC
10
C4
11
Part Number
Package
Bulk Packaging
Die 2
C3
12
MADR-009190-000100
MADR-009190-000DIE
MADR-009190-0001TR
C2
13
C1
14
1000 piece reel
VOPT
Ground
15
1. Reference Application Note M513 for reel size information.
2. Die sales are available in waffle packs in increments of 100
pieces.
16
3. The bottom of the die should be isolated for part number
MADR-009190-000DIE.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MADR-009190-000100
Quad Driver for GaAs FET or PIN Diode
Switches and Attenuators
Rev. 4
Guaranteed Operating Ranges (for driving FET or PIN devices) 4,5,8
Symbol
VCC
Parameter
Unit
V
Min.
4.5
Typ.
5.0
Max.
Positive DC Supply Voltage
Negative DC Supply Voltage
5.5
VEE
V
-10.5
-5.0
-4.5
6,7
VOPT
Optional DC Output Supply Voltage
Negative Supply Voltage Range
V
V
0
—
VCC
VOPT - VEE
VCC - VEE
TOPER
IOH
4.5
Note 6,7
16.0
Positive to negative Supply Range
Operating Temperature
V
9.0
-40
-35
—
10.0
+25
—
16.0
+85
—
°C
DC Output Current - High
DC Output Current - Low
mA
mA
IOL
—
35
Trise, Tfall
Maximum Input Rise or Fall Time
ns
—
—
500
4. Unused logic inputs must be tied to either GND or VCC
5. All voltages are relative to GND.
.
6. VOPT is grounded in most cases when FETs are driven. To improve the intermodulation performance and the 1 dB compression point of
GaAs control devices at low frequencies, VOPT can be increased to between 1.0 and 2.0V. The nonlinear characteristics of the GaAs
control devices will approximate performance at 500 MHz. It should be noted that the control current that is on the GaAs MMICs will
increase when positive controls are applied.
7. When this driver is used to drive PIN diodes, VOPT is often set to +5.0V, with VEE set to -5.0V.
8. 0.01 uF decoupling capacitors are required on the power supply lines.
Handling Procedures
Truth Table
Please observe the following precautions to avoid
damage:
Input
Cn
Outputs
An
VEE
Bn
VOPT
VEE
Static Sensitivity
Logic “0”
Logic “1”
Silicon Integrated Circuits are sensitive to
electrostatic discharge (ESD) and can be damaged
by static electricity. Proper ESD control techniques
should be used when handling these devices.
VOPT
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MADR-009190-000100
Quad Driver for GaAs FET or PIN Diode
Switches and Attenuators
Rev. 4
DC Characteristics over Guaranteed Operating Range
Symbol
Parameter
Test Conditions
Units
Min.
Typ.
Max.
VIH
Input High Voltage
Guaranteed High Input Voltage
V
2.0
—
—
VIL
VOH
VOL
Input Low Voltage
Output High Voltage
Output Low Voltage
Guaranteed Low Input Voltage
IOH = -0.5 mA
V
V
V
—
VOPT - 0.1
—
—
—
—
0.8
—
IOL = 0.5 mA
VEE + 0.1
Input Leakage Current (per
Input)
VIN = VCC or GND, VEE = min,
VCC = max, VOPT = min or max
IIN
IOH
IOL
nA
mA
mA
-250
-35
—
—
—
—
250
—
DC Output Current—High
(per Output)
VCC = 5.0V, VEE = -5.0V,
VOPT = 5.0V
DC Output Current—Low
(per Output)
VCC = 5.0V, VEE = -5.0V,
VOPT = 5.0V
35
Peak Spike Output Current
(Rising Edge)
VCC = 5.0V, VEE = -5.0V,
IOH_SPIKE
mA
mA
—
—
35
50
—
—
VOPT = 5.0V, CL = 25 pF
(per Output)
Peak Spike Output Current
(Falling Edge)
VCC = 5.0V, VEE = -5.0V,
OPT = 5.0V, CL = 25 pF
IOL_SPIKE
V
(per Output)
VIN = VCC or GND, VEE = -10.5V,
VCC = 5.5V, VOPT = 5.5V,
No Output Load
ICC
∆ ICC
IEE
Quiescent Supply Current
µA
mA
µA
—
—
—
—
—
—
20
1.0
20
Additional Supply Current
(per TTL Input pin)
VCC= max, VIN = VCC -2.1V
VIN = VCC or GND, VEE = -10.5V,
VCC = 5.5V, VOPT = 5.5V,
No Output Load
Quiescent Supply Current
Quiescent Supply Current
VIN = VCC or GND, VEE = -10.5V,
VCC = 5.5V, VOPT = 5.5V,
No Output Load
IOPT
µA
—
—
—
20
—
VCC = 5.0V, VEE = -5.0V,
VOPT = 5.0V, VOUT = -4.9V
+25°C, Note 9
Output Resistance NFET On
(to VEE)
RNFET
Ω
40
VCC = 5.0V, VEE = -5.0V,
VOPT = 5.0V, VOUT = 4.9V
+25°C, Note 9
Output Resistance PFET On
RPFET
Ω
—
45
—
(to VOPT
)
9. See plot of RNFET and RPFET for variations over temperature for driving 4.99k and 82 ohm resistive load. (Note that this corresponds to 1 mA
and 33 mA currents at 25°).
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MADR-009190-000100
Quad Driver for GaAs FET or PIN Diode
Switches and Attenuators
Rev. 4
AC Characteristics Over Guaranteed Operating Range 10
Typical performance
Symbol
TPLH
Parameter
Propagation Delay
-40°C
20
20
5
+25°C
22
22
6
+85°C
25
25
8
Unit
ns
ns
TPHL
Propagation Delay
TTLH
Output Transition Time (Rising Edge)
Output Transition Time (Falling Edge)
Delay Skew
ns
TTHL
5
6
8
ns
Tskew
2
2
2
ns
PRF (max)
CIN
50% Duty Cycle
DC
5
—
10
5
MHz
pF
pF
pF
Input Capacitance
5
CPDC
Power Dissipation Capacitance 11
Power Dissipation Capacitance 11
50
100
50
100
50
100
CPDE
10. VCC = 4.5V, VOPT = 0V, VEE = min or max, CL = 25 pF, input LOGIC1 = 3V, LOGIC0 = 0V, Trise, Tfall = 6 ns.
11. Total Power Dissipation is calculated by the following formula: PD = VCC2fC PDC + VEE2fCPDE
Switching Waveforms
Output Resistance vs. Temperature12
Tf
Tr
120.0
LOGIC 1
LOGIC 0
90%
1.3V
90%
PFET with 82ꢀ load
100.0
NFET with 82ꢀ load
1.3V
INPUT C
VIN
10%
TPHL
10%
80.0
TPLH
PFET with 4.99k load
TTLH
TTHL
OUTPUT
HIGH
OUTPUT B
60.0
40.0
90%
50%
90%
50%
VOUT
10%
10%
TSKEW
OUTPUT
LOW
NFET with 4.99k load
20.0
OUTPUT A
TSKEW
-55.0
-25.0
5.0
35.0
65.0
95.0
125.0
Temperature (C)
12. Output resistance were measured under the condition of
VCC = 5.0V, VOPT = 5.0V, and VEE = -5.0V, with load resistors
from outputs to ground.
4
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MADR-009190-000100
Quad Driver for GaAs FET or PIN Diode
Switches and Attenuators
Rev. 4
Absolute Maximum Ratings13
Symbol
Parameter
Min
Max
Unit
VCC
ICC
Positive DC Supply Voltage
-0.5
—
7.0
20
V
Positive DC Supply Current (-0.5V ≤ VIN ≤ 0.8V; 2.0V ≤
VIN ≤ VCC + 0.5V; VCC - VIN ≤ 7.0V )
mA
VEE
IEE
Negative DC Supply Voltage
Negative DC Supply Current (per Output) 14
-11.0
-50
0.5
—
V
mA
VOPT
IOPT
Optional DC Output Supply Voltage
-0.5
—
VCC +0.5
50
V
V
Optional DC Output Supply Current (per Output) 14
VOPT - VEE
VCC - VEE
VIN
Output to Negative Supply Voltage Range
Positive to Negative Supply Voltage Range
DC Input Voltage
-0.5
-0.5
18.0
18.0
V
V
V
-0.5
VCC +0.5
Note 15
VO
DC Output Voltage
VEE – 0.5
—
VOPT + 0.5
500
V
16
PD
Power Dissipation in Still Air
mW
TOPER
TSTG
Operating Temperature
Storage Temperature
ESD Sensitivity
-55
-65
2.0
125
150
—
°C
°C
kV
ESD
13. All voltages are referenced to GND. All inputs and outputs incorporate latch-up protection structures.
14. The maximum IEE and IOPT are specified under the condition of VCC = 5.5V, VEE = -5.5V, VOPT = 5.5V, and the total power dissipation is
within 500 mW in still air.
15. If VCC ≥ 6.5V, then the minimum for VIN is VCC - 7.0V.
16. Derate -7 mW/°C from 65°C to 85°C.
5
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MADR-009190-000100
Quad Driver for GaAs FET or PIN Diode
Switches and Attenuators
Rev. 4
Equivalent Output Circuit for An and Bn Outputs (33 mA load at 25°)
PFET
62 ohms
Vopt
An and Bn
Outputs
Vee
NFET
67 ohms
Typical Application for a SPDT Switch 17,18
17. Note that the description of the above circuit is on the following page.
18. Only one section of MADR-009190-000100 is shown. The other three sections will have equivalent performance.
6
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MADR-009190-000100
Quad Driver for GaAs FET or PIN Diode
Switches and Attenuators
Rev. 4
Description of Circuit
The MADR-009190-000100 provides four pairs of complementary outputs that are each capable of driving a
maximum of ± 35 mA into a load. In addition, with proper capacitor selection (C3 & C4) used in parallel with
the current setting resistor (R1 & R2), additional spiking current can be achieved.
To achieve the Non-Inverting and Inverting complementary voltages, each output is switched between two
internal FETs. The FETs are connected to VOPT for the positive output and VEE for the negative output. VOPT
and VEE are adjustable for various configurations and have the following limitations: VEE can be no more nega-
tive than –10.5 volts; VOPT can be no more positive than +5.5 volts AND VOPT must always be less than or
equal to VCC. Increasing VOPT beyond VCC will prevent the device from switching states when commanded to
by the logic input. The most common configuration is to drive VEE at –5.0 volts with VCC and VOPT tied together
at +5.0 volts.
Lead-Free, SOIC-16†
†
Reference Application Note M538 for lead-free solder reflow recommendations.
Plating is 100% matte tin over copper.
7
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MADR-009190-000100
Quad Driver for GaAs FET or PIN Diode
Switches and Attenuators
Rev. 4
Pad Configuration19,20
Die Outline
Die Size: 1325 x 1735 µm (nominal)
Pad
No.
X (µm)
nominal nominal
Y (µm)
Pad Size (µm)
X x Y
Lower left edge of die
85 x 85
0
1
0
0
482.95
1489
2
217.85
1534.6
85 x 85
3
4
200.45
200.45
200.45
200.45
200.45
395.6
1407.9
1114.2
820.45
526.8
85 x 85
85 x 85
5
85 x 85
6
85 x 85
7
229.35
157.95
181.5
85 x 85
8
85 x 85
9
777.55
1126.35
1126.35
1126.35
1126.35
1126.35
1126.35
767.9
132 x 94
10
11
12
13
14
15
16
17
181.75
436.85
691.95
947.05
1202.15
1457.3
1553.5
1735
132 x 94
132 x 94
132 x 94
132 x 94
132 x 94
132 x 94
132 x 94
1325
Upper right edge of die
19. All X,Y dimensions are at bond pad center.
20. Die thickness is 8.0 mils.
8
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
相关型号:
©2020 ICPDF网 联系我们和版权申明