MADR-009190-00GDIE [TE]
High Voltage CMOS Technology;
| 型号： | MADR-009190-00GDIE |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | High Voltage CMOS Technology |
| 文件： | 总10页 (文件大小：772K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MADR-009190
Quad Driver for GaAs FET or PIN Diode
Switches and Attenuators
Rev. V6
Features
High Voltage CMOS Technology
Functional Schematic
VCC
VOPT
Four Channel
Positive Voltage Control
TTL Buffer
Logic C1
Level Shifter
Output A1
CMOS device using TTL input levels
Low Power Dissipation
Low Cost Lead-Free SOIC-16 Plastic Package
Halogen-Free “Green” Mold Compound
RoHS* Compliant
VOPT
Driver1
VEE
Inverter
Level Shifter
Output B1
Description
The MADR-009190-000100 is a four channel driver
used to translate TTL control inputs into gate control
voltages for GaAs FET microwave switches and
attenuators. High speed analog CMOS technology
is utilized to achieve low power dissipation at
moderate to high speeds, encompassing most
microwave switching applications. The output HIGH
level is optionally 0 to 2 V (relative to GND) to
optimize the intermodulation products of FET control
devices at low frequencies. For driving PIN diode
circuits, the outputs are nominally switched between
+5 V & -5 V. The actual driver output voltages will be
lower when driving large currents due to the
resistance of the output devices.
VEE
Output A2
Same as
Driver 1
Logic C2
Logic C3
Logic C4
Output B2
Output A3
Same as
Driver 1
Output B3
Output A4
Same as
Driver 1
Output B4
Pin Configuration2
Pin No.
Function
VEE
Pin No.
Function
Output A1
Output B1
Output A2
Output B2
Output A3
Output B3
Output A4
Output B4
1
2
3
4
5
6
7
8
9
Ordering Information1
VCC
10
11
12
13
14
15
16
Part Number
Package
C4
MADR-009190-000100
MADR-009190-000DIE
MADR-009190-0001TR
MADR-009190-00GDIE
Bulk Packaging
C3
100 piece waffle pack
1000 piece reel
C2
C1
100 piece gel pack
VOPT
Ground
1. Reference Application Note M513 for reel size information.
2. The bottom of the die should be isolated for part number
MADR-009190-000DIE and MADR-009190-00GDIE
* Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.
1
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADR-009190
Quad Driver for GaAs FET or PIN Diode
Switches and Attenuators
Rev. V6
DC Characteristics over Guaranteed Operating Range
Symbol
Parameter
Test Conditions
Units
Min.
Typ.
Max.
VIH
Input High Voltage
Guaranteed High Input Voltage
V
2.0
—
—
VIL
VOH
VOL
Input Low Voltage
Output High Voltage
Output Low Voltage
Guaranteed Low Input Voltage
IOH = -0.5 mA
V
V
V
—
VOPT - 0.1
—
—
—
—
0.8
—
IOL = +0.5 mA
VEE + 0.1
Input Leakage Current
(per input)
VIN = VCC or GND, VEE = min,
VCC = max, VOPT = min or max
IIN
IOH
IOL
nA
mA
mA
-250
-35
—
—
—
—
250
—
DC Output Current - High
(per output)
VCC = +5.0 V, VEE = -5.0 V,
VOPT = +5.0 V
DC Output Current - Low
(per output)
VCC = +5.0 V, VEE = -5.0 V,
VOPT = +5.0 V
35
Peak Spike Output Current
(Rising Edge)
VCC = +5.0 V, VEE = -5.0 V,
VOPT = +5.0 V, CL = 25 pF
IOH_SPIKE
mA
mA
—
—
35
50
—
—
(per output)
Peak Spike Output Current
(Falling Edge)
VCC = +5.0 V, VEE = -5.0 V,
VOPT = +5.0 V, CL = 25 pF
IOL_SPIKE
(per output)
VIN = VCC or GND, VEE = -10.5 V,
VCC = +5.5 V, VOPT = +5.5 V,
No Output Load
ICC
∆ ICC
IEE
Quiescent Supply Current
µA
mA
µA
—
—
—
—
—
—
20
1.0
20
Additional Supply Current
(per TTL input pin)
VCC = max, VIN = VCC -2.1 V
VIN = VCC or GND, VEE = -10.5 V,
VCC = +5.5 V, VOPT = +5.5 V,
No Output Load
Quiescent Supply Current
Quiescent Supply Current
VIN = VCC or GND, VEE = -10.5 V,
VCC = +5.5 V, VOPT = +5.5 V,
No Output Load
IOPT
µA
Ω
—
—
—
20
VCC = +5.0 V, VEE = -5.0 V,
VOPT = +5.0 V, VOUT = -4.9 V
+25°C, Note 3
Output Resistance NFET On
(to VEE)
RNFET
40
—
VCC = +5.0 V, VEE = -5.0 V,
VOPT = +5.0 V, VOUT = +4.9 V
+25°C, Note 3
Output Resistance PFET On
RPFET
Ω
—
45
—
(to VOPT
)
3. See plot of RNFET and RPFET for variations over temperature for driving 4.99k and 82 ohm resistive load. (Note that this corresponds to 1 mA
and 33 mA currents at +25°C).
2
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADR-009190
Quad Driver for GaAs FET or PIN Diode
Switches and Attenuators
Rev. V6
AC Characteristics Over Guaranteed Operating Range4
Typical performance
Symbol
Parameter
Unit
-40°C
+25°C
+85°C
TPLH
TPHL
Propagation Delay
Propagation Delay
ns
ns
20
20
5
22
25
22
6
25
8
TTLH
Output Transition Time (Rising Edge)
Output Transition Time (Falling Edge)
Delay Skew
ns
TTHL
ns
5
6
8
Tskew
ns
2
2
2
PRF (max.)
CIN
50% Duty Cycle
MHz
pF
pF
pF
DC
5
—
5
10
5
Input Capacitance
CPDC
Power Dissipation Capacitance5
Power Dissipation Capacitance5
50
100
50
100
50
100
CPDE
4. VCC = 4.5 V, VOPT = 0 V, VEE = min or max, CL = 25 pF, input LOGIC1 = 3 V, LOGIC0 = 0 V, TRISE, TFALL = 6 ns.
5. Total Power Dissipation is calculated by the following formula: PD = VCC2fC PDC + VEE2fCPDE.
Output Resistance vs. Temperature6
Truth Table
Input
Cn
Outputs
120.0
PFET with 82Ω load
An
Bn
100.0
NFET with 82Ω load
Logic “0”
Logic “1”
VEE
VOPT
80.0
PFET with 4.99k load
60.0
40.0
VOPT
VEE
NFET with 4.99k load
20.0
-55.0
-25.0
5.0
35.0
65.0
95.0
125.0
Handling Procedures
Temperature (C)
Please observe the following precautions to avoid
damage:
6. Output resistance were measured under the condition of
VCC = +5 V, VOPT = +5 V, and VEE = -5 V, with load resistors
from outputs to ground.
Static Sensitivity
Silicon Integrated Circuits are sensitive to
electrostatic discharge (ESD) and can be damaged
by static electricity. Proper ESD control techniques
should be used when handling these devices.
3
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADR-009190
Quad Driver for GaAs FET or PIN Diode
Switches and Attenuators
Rev. V6
Guaranteed Operating Ranges (for driving FET or PIN devices)7,8,9
Symbol
VCC
Parameter
Unit
V
Min.
4.5
-10.5
0
Typ.
5.0
Max.
Positive DC Supply Voltage
Negative DC Supply Voltage
Optional DC Output Supply Voltage
Negative Supply Voltage Range
Positive to negative Supply Range
Operating Temperature
5.5
-4.5
VCC
16.0
16.0
+85
—
VEE
V
-5.0
10,11
VOPT
V
—
VOPT - VEE
VCC - VEE
TOPER
V
4.5
9.0
-40
-35
—
Note 10,11
10.0
+25
V
°C
mA
mA
ns
IOH
DC Output Current - High
—
IOL
DC Output Current - Low
—
35
TRISE, TFALL
Maximum Input Rise or Fall Time
—
—
500
7. Unused logic inputs must be tied to either GND or VCC
.
8. MACOM recommends that VCC be powered on before VEE, and powered off after VEE
.
9. 0.01 µF decoupling capacitors are required on the power supply lines.
10. VOPT is grounded in most cases when FETs are driven. To improve the intermodulation performance and the 1 dB compression point of
GaAs control devices at low frequencies, VOPT can be increased to between 1 and 2 V. The nonlinear characteristics of the GaAs control
devices will approximate performance at 500 MHz. It should be noted that the control current that is on the GaAs MMICs will increase
when positive controls are applied.
11. When this driver is used to drive PIN diodes, VOPT is often set to +5 V, with VEE set to -5 V.
4
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADR-009190
Quad Driver for GaAs FET or PIN Diode
Switches and Attenuators
Rev. V6
Absolute Maximum Ratings12
Symbol
VCC
Parameter
Unit
V
Min.
-0.5
—
Max.
Positive DC Supply Voltage
7.0
20
Positive DC Supply Current
(-0.5 V ≤ VIN ≤ 0.8 V; 2.0 V ≤ VIN ≤ VCC +0.5 V; VCC - VIN ≤ 7.0 V )
ICC
mA
V
VEE
Negative DC Supply Voltage
Negative DC Supply Current (per Output)13
Optional DC Output Supply Voltage
Optional DC Output Supply Current (per Output)13
Output to Negative Supply Voltage Range
Positive to Negative Supply Voltage Range
DC Input Voltage
-11.0
-50
0.5
IEE
mA
V
—
VOPT
IOPT
-0.5
—
VCC +0.5
50
V
VOPT - VEE
VCC - VEE
VIN
V
-0.5
-0.5
18.0
18.0
VCC +0.5
VOPT + 0.5
1
V
-0.5
Note 14
V
VO
DC Output Voltage
V
VEE – 0.5
—
15
PD
Power Dissipation in Still Air
W
°C
°C
kV
TOPER
TSTG
Operating Temperature
-55
125
Storage Temperature
-65
150
ESD
ESD Sensitivity
2.0
—
12. All voltages are referenced to GND. All inputs and outputs incorporate latch-up protection structures.
13. The maximum IEE and IOPT are specified under the condition of VCC = +5.5 V, VEE = -5.5 V, VOPT = +5.5 V, and the total power dissipation is
within 1 W in still air.
14. If VCC ≥ 6.5 V, then the minimum for VIN is VCC - 7.0 V.
15. Derate -7 mW/°C from 65°C to 85°C.
5
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADR-009190
Quad Driver for GaAs FET or PIN Diode
Switches and Attenuators
Rev. V6
Switching Waveforms
Tf
Tr
LOGIC 1
LOGIC 0
90%
90%
1.3V
1.3V
INPUT C
10%
TPHL
10%
VIN
TPLH
TTLH
TTHL
OUTPUT
HIGH
OUTPUT B
90%
50%
90%
50%
VOUT
10%
10%
TSKEW
OUTPUT
LOW
OUTPUT A
TSKEW
Equivalent Output Circuit for An and Bn Outputs (33 mA load at 25°C)
PFET
62 ohms
Vopt
An and Bn
Outputs
Vee
NFET
67 ohms
6
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADR-009190
Quad Driver for GaAs FET or PIN Diode
Switches and Attenuators
Rev. V6
Typical Application for a SPDT Switch16
RF1
RF SECTION
VCC +5V
C3
560 pF
C1
.01 µF
VOPT
15
B1
5
20
RF
Common
R1
R2
C1
19
MADR-009190-
Logic
000100
1
A1
4
13
VEE -5V
C2
.01 µF
Rc
C4
560 pF
GND
RF2
16. Only one section of MADR-009190 is shown. The other three sections will have equivalent performance.
Description of Circuit
The MADR-009190 provides four pairs of complementary outputs that are each capable of driving a maximum of
±35 mA into a load. In addition, with proper capacitor selection (C3 & C4) used in parallel with the current
setting resistor (R1 & R2), additional spiking current can be achieved.
To achieve the Non-Inverting and Inverting complementary voltages, each output is switched between two
internal FETs. The FETs are connected to VOPT for the positive output and VEE for the negative output. VOPT and
VEE are adjustable for various configurations and have the following limitations: VEE can be no more negative
than -10.5 volts; VOPT can be no more positive than +5.5 volts and VOPT must always be less than or equal to
VCC. Increasing VOPT beyond VCC will prevent the device from switching states when commanded to by the logic
input. The most common configuration is to drive VEE at -5.0 volts with VCC and VOPT tied together at +5.0 volts.
7
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADR-009190
Quad Driver for GaAs FET or PIN Diode
Switches and Attenuators
Rev. V6
Lead-Free, SOIC-16†
†
Reference Application Note M538 for lead-free solder reflow recommendations.
Plating is 100% matte tin over copper.
8
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADR-009190
Quad Driver for GaAs FET or PIN Diode
Switches and Attenuators
Rev. V6
Pad Configuration17,18
Die Outline
Die Size: 1325 x 1735 µm (nominal)
X (µm)
nominal nominal
Y (µm)
Pad Size (µm)
Pad No.
X x Y
Lower left edge of die
85 x 85
0
1
0
0
482.95
1489
2
217.85
1534.6
85 x 85
3
4
200.45
200.45
200.45
200.45
200.45
395.6
1407.9
1114.2
820.45
526.8
85 x 85
85 x 85
5
85 x 85
6
85 x 85
7
229.35
157.95
181.5
85 x 85
8
85 x 85
9
777.55
1126.35
1126.35
1126.35
1126.35
1126.35
1126.35
767.9
132 x 94
10
11
12
13
14
15
16
17
181.75
436.85
691.95
947.05
1202.15
1457.3
1553.5
1735
132 x 94
132 x 94
132 x 94
132 x 94
132 x 94
132 x 94
132 x 94
1325
Upper right edge of die
17. All X,Y dimensions are at bond pad center.
18. Die thickness is 8.0 mils.
9
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADR-009190
Quad Driver for GaAs FET or PIN Diode
Switches and Attenuators
Rev. V6
MACOM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with MACOM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
10
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
相关型号：
©2020 ICPDF网 联系我们和版权申明