MADR-009269-0001TR [TE]
Single Driver for GaAs FET or PIN Diode Switches and Attenuators;型号: | MADR-009269-0001TR |
厂家: | TE CONNECTIVITY |
描述: | Single Driver for GaAs FET or PIN Diode Switches and Attenuators 光电二极管 接口集成电路 |
文件: | 总9页 (文件大小:741K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MADR-009269
Single Driver for GaAs FET or PIN Diode Switches and Attenuators
Rev. V3
Features
Functional Schematic
High Voltage CMOS Technology
VCC
VOPT
Complementary Outputs
Positive Voltage Control
CMOS device using TTL input levels
Low Power Dissipation
Low Cost Plastic SOIC-8 Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
RoHS* Compliant
TTL Buffer
Logic C
Level Shifter
Output A
VOPT
VEE
Description
Level Shifter
Output B
Inverter
The MADR-009269 is a single channel CMOS driver
used to translate TTL control inputs into
complementary gate control voltages for GaAs FET
microwave switches and attenuators. High speed
analog CMOS technology is utilized to achieve low
power dissipation at moderate to high speeds,
encompassing most microwave switching
applications. The output HIGH level is optionally 0 to
2 V (relative to GND) to optimize the intermodulation
products of FET control devices at low frequencies.
For driving PIN diode circuits, the outputs are
nominally switched between +5 V & -5 V.
VEE
Pin Configuration2
Pin No.
Function
Output A
GND
1
2
3
4
5
6
7
8
VCC
C, Logic
VEE
Ordering Information1
Part Number
Package
VOPT
GND
MADR-009269-000100
MADR-009269-00GDIE
MADR-009269-000DIE
MADR-009269-0001TR
bulk packaging
Output B
100 piece gel pack
100 piece waffle pack
1000 piece reel
2. The bottom of the die should be isolated for part number
MADR-009269-000DIE and MADR-009269-00GDIE.
1. Reference Application Note M513 for reel size information.
* Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADR-009269
Single Driver for GaAs FET or PIN Diode Switches and Attenuators
Rev. V3
DC Characteristics over Guaranteed Operating Range
Symbol
Parameter
Test Conditions
Units
Min.
Typ.
Max.
VIH
Input High Voltage
Guaranteed High Input Voltage
V
2.0
—
—
VIL
VOH
VOL
Input Low Voltage
Output High Voltage
Output Low Voltage
Guaranteed Low Input Voltage
IOH = -1 mA
V
V
V
—
VOPT -0.1
—
—
—
—
0.8
—
IOL = +1 mA
VEE +0.1
VIN = VCC or GND, VEE = min,
VCC = max, VOPT = min or max
IIN
Input Leakage Current
µA
Ω
-1
—
1
VCC = 5.0 V, VEE = -5.0 V,
VOPT = 5.0 V, VOUT = -4.9 V
+25°C
Output Resistance NFET On
(to VEE)
RNFET
—
30
—
VCC = 5.0 V, VEE = -5.0 V,
VOPT = 5.0 V, VOUT = 4.9 V
+25°C
Output Resistance PFET On
RPFET
Ω
—
30
—
(to VOPT
)
VIN = VCC or GND, VEE = -10.5 V,
VCC = 5.5 V, VOPT = 5.5 V,
No Output Load
ICC
D ICC
IEE
Quiescent Supply Current
µA
mA
µA
—
—
—
1
1
1
—
—
—
Additional Supply Current
(per TTL Input pin)
VCC= max, VIN = VCC -2.1 V
VIN = VCC or GND, VEE = -10.5 V,
VCC = 5.5 V, VOPT = 5.5 V,
No Output Load
Quiescent Supply Current
Quiescent Supply Current
VIN = VCC or GND, VEE = -10.5 V,
VCC = 5.5 V, VOPT = 5.5 V,
No Output Load
IOPT
µA
—
1
—
AC Characteristics Over Guaranteed Operating Range3
Typical performance
Symbol
Parameter
Unit
-40°C
+25°C
22
22
5
+85°C
25
25
8
TPLH
TPHL
Propagation Delay
Propagation Delay
ns
ns
20
20
5
TTLH
Output Transition Time (Rising Edge)
Output Transition Time (Falling Edge)
Delay Skew
ns
TTHL
ns
4
4
5
Tskew
ns
2.5
DC
5
2.5
—
2.5
10
5
PRF (max)
CIN
50% Duty Cycle
MHz
pF
Input Capacitance
5
3. VCC = +4.5 V, VEE = -4.5 V, VOPT = 0 V or +4.5 V, CL = 25 pF, TRISE, TFALL = 6 ns
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADR-009269
Single Driver for GaAs FET or PIN Diode Switches and Attenuators
Rev. V3
Handling Procedures
Truth Table
Please observe the following precautions to avoid
damage:
Input
C
Outputs
A
B
Static Sensitivity
Logic “0”
Logic “1”
VEE
VOPT
These electronic devices are sensitive to
electrostatic discharge (ESD) and can be damaged
by static electricity. Proper ESD control techniques
should be used when handling these devices.
VOPT
VEE
Guaranteed Operating Ranges4,5,6
Symbol
VCC
Parameter
Unit
V
Min.
4.5
-10.5
0
Typ.
5.0
Max.
5.5
Positive DC Supply Voltage
Negative DC Supply Voltage
Optional DC Output Supply Voltage
Negative Supply Voltage Range
Positive to negative Supply Range
Operating Temperature
VEE
V
-5.0
—
-4.5
VCC
16.0
16
7,8
VOPT
V
VOPT - VEE
VCC - VEE
TOPER
V
4.5
9
Note 7,8
10
V
°C
mA
mA
ns
-40
-50
—
+25
—
+85
—
IOH
DC Output Current - High
IOL
DC Output Current - Low
—
50
TRISE, TFALL
Maximum Input Rise or Fall Time
—
—
500
4. Unused logic inputs must be tied to either GND or VCC
.
5. MACOM recommends that VCC be powered on before VEE, and powered off after VEE
.
6. 0.01 µF decoupling capacitors are required on the power supply lines.
7. VOPT is grounded in most cases when FETs are driven. To improve the intermodulation performance and the 1 dB compression point of
GaAs control devices at low frequencies, VOPT can be increased to between 1 and 2 V. The nonlinear characteristics of the GaAs control
devices will approximate performance at 500 MHz. It should be noted that the control current that is on the GaAs MMICs will increase when
positive controls are applied.
8. When this driver is used to drive PIN diodes, VOPT is often set to +5 V, with VEE set to -5 V.
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADR-009269
Single Driver for GaAs FET or PIN Diode Switches and Attenuators
Rev. V3
Absolute Maximum Ratings9
Symbol
VCC
Parameter
Unit
V
Min.
-0.5
—
Max.
7.0
20
Positive DC Supply Voltage
Positive DC Supply Current (-0.5 V ≤ VIN ≤ 0.8 V;
2.0 V ≤ VIN ≤ VCC + 0.5 V; VCC - VIN ≤ 7.0 V )
ICC
mA
V
VEE
Negative DC Supply Voltage
Negative DC Supply Current (per output)10
Optional DC Output Supply Voltage
Optional DC Output Supply Current (per output)10
Output to Negative Supply Voltage Range
Positive to Negative Supply Voltage Range
DC Input Voltage
-11.0
-60
0.5
—
IEE
mA
V
VOPT
IOPT
-0.5
—
Note 11
60
mA
V
VOPT - VEE
VCC - VEE
VIN
-0.5
-0.5
18.0
V
18.0
-0.5
Note 12
V
VCC +0.5
VOPT + 0.5
500
VO
DC Output Voltage
V
VEE – 0.5
—
13
PD
Power Dissipation in Still Air
mW
°C
°C
kV
TOPER
TSTG
Operating Temperature
-55
125
Storage Temperature
-65
150
ESD
ESD Sensitivity
2.0
—
9. All voltages are referenced to GND. All inputs and outputs incorporate latch-up protection structures.
10. The maximum IEE and IOPT are specified under the condition of VCC = 5.5 V, VEE = -5.5 V, VOPT = 5.5 V, and the total power dissipation is
within 500 mW in still air.
11. The absolute maximum rating for VOPT is VCC +0.5 V, or +7.0 V, whichever is less.
12. If VCC ≥ 6.5 V, then the minimum for VIN is VCC -7.0 V.
13. Derate -7 mW/°C from 65°C to 85°C.
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADR-009269
Single Driver for GaAs FET or PIN Diode Switches and Attenuators
Rev. V3
Switching Waveforms
Tf
Tr
LOGIC 1
LOGIC 0
90%
1.3V
90%
1.3V
INPUT C
VIN
10%
TPHL
10%
TPLH
TTLH
TTHL
OUTPUT
HIGH
OUTPUT B
90%
50%
90%
50%
VOUT
10%
10%
TSKEW
OUTPUT
LOW
OUTPUT A
TSKEW
Equivalent Output Circuit for A and B Outputs (50 mA load at 25°C)
PFET
30 ohms
VOPT
An and Bn
Outputs
VEE
NFET
30 ohms
5
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADR-009269
Single Driver for GaAs FET or PIN Diode Switches and Attenuators
Rev. V3
Typical Application for a SPDT Switch
RF1
RF SECTION
VCC +5V
C3
560 pF
C1
.01 µF
VOPT
15
B1
5
20
RF
Common
R1
R2
C1
19
MADR-009269-
Logic
000100
1
A1
4
13
VEE -5V
C2
.01 µF
Rc
C4
560 pF
GND
RF2
Description of Circuit
The MADR-009269 provides a pair of complementary outputs that are each capable of driving a maximum of
±50 mA into a load. In addition, with proper capacitor selection (C3 & C4) used in parallel with the current setting
resistor (R1 & R2), additional spiking current can be achieved.
To achieve the non-inverting and inverting complementary voltages, each output is switched between two
internal FETs. The FETs are connected to VOPT for the positive output and VEE for the negative output. VOPT and
VEE are adjustable for various configurations and have the following limitations: VEE can be no more negative
than -10.5 volts; VOPT can be no more positive than +5.5 volts and VOPT must always be less than or equal to
VCC. Increasing VOPT beyond VCC will prevent the device from switching states when commanded to by the logic
input. The most common configuration is to drive VEE at -5.0 volts with VCC and VOPT tied together at +5.0 volts.
6
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADR-009269
Single Driver for GaAs FET or PIN Diode Switches and Attenuators
Rev. V3
Lead-Free, SOIC-8†
†
Reference Application Note M538 for lead-free solder reflow recommendations.
Plating is 100% matte tin over copper.
7
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADR-009269
Single Driver for GaAs FET or PIN Diode Switches and Attenuators
Rev. V3
Pad Configuration14,15
Die Outline
Die Size: 1130 x 1290 µm (nominal)
Pad
No.
X (µm)
nominal nominal
Y (µm)
Pad Size (µm)
X x Y
9
8
1
0
1
2
3
4
5
6
7
8
9
0
0
Lower left edge of die
94 x 132
266.40
157.50
200.40
365.30
684.35
972.50
972.50
863.60
1130
1092.35
903.70
663.65
200.45
157.50
230.50
451.45
1092.35
1290
2
85 x 85
85 x 85
3
85 x 85
7
85 x 85
85 x 85
6
4
85 x 85
5
0
94 x 132
Upper right edge of die
14. All X,Y dimensions are at bond pad center.
15. Die thickness is 8.0 mils.
8
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADR-009269
Single Driver for GaAs FET or PIN Diode Switches and Attenuators
Rev. V3
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
9
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明