2SC4536-T1QS [NEC]
RF Small Signal Bipolar Transistor, 0.25A I(C), 1-Element, Ultra High Frequency Band, Silicon, NPN, PLASTIC, POWER, MINIMOLD PACKAGE-3;型号: | 2SC4536-T1QS |
厂家: | NEC |
描述: | RF Small Signal Bipolar Transistor, 0.25A I(C), 1-Element, Ultra High Frequency Band, Silicon, NPN, PLASTIC, POWER, MINIMOLD PACKAGE-3 放大器 晶体管 |
文件: | 总7页 (文件大小:47K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DATA SHEET
NPN SILICON RF TRANSISTOR
2SC4536
NPN EPITAXIAL SILICON RF TRANSISTOR FOR
HIGH-FREQUENCY LOW-NOISE AMPLIFICATION
3-PIN POWER MINIMOLD
DESCRIPTION
The 2SC4536 is designed for use in middle power, low distortion low noise figure RF amplifier. It features
excellent linearity and large dynamic range, which make it suitable for CATV, telecommunication, and other use, it
employs plastic surface mount type package (SOT-89).
FEATURES
•
•
•
•
Low distortion: IM2 = 59.0 dBc TYP., IM3 = 82.0 dBc TYP. @ VCE = 10 V, IC = 50 mA
Low noise: NF = 2.0 dB TYP. @ VCE = 10 V, IC = 50 mA, f = 1 GHz
Large Ptot : Ptot = 2.0 W (Mounted on double-sided copper-clad 16 cm2 × 0.7 mm (t) ceramic substrate)
Small package : 3-pin power minimold package
ORDERING INFORMATION
Part Number
Quantity
Supplying Form
2SC4536
25 pcs (Non reel)
1 kpcs/reel
• 12 mm wide embossed taping
• Collector face the perforation side of the tape
2SC4536-T1
Remark To order evaluation samples, contact your nearby sales office.
The unit sample quantity is 25 pcs.
ABSOLUTE MAXIMUM RATINGS (TA = +25°C)
Parameter
Collector to Base Voltage
Collector to Emitter Voltage
Emitter to Base Voltage
Collector Current
Symbol
VCBO
VCEO
VEBO
IC
Ratings
Unit
V
30
15
V
3.0
V
250
mA
W
P
tot Note
2.0
Total Power Dissipation
Junction Temperature
Storage Temperature
Tj
150
°C
°C
Tstg
−65 to +150
Note Mounted on double-sided copper-clad 16 cm2 × 0.7 mm (t) ceramic substrate
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.
The information in this document is subject to change without notice. Before using this document, please confirm that
this is the latest version.
Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices
representative for availability and additional information.
Document No. PU10338EJ01V0DS (1st edition)
(Previous No. P10369EJ2V1DS00)
The mark • shows major revised points.
Date Published May 2003 CP(K)
Printed in Japan
NEC Compound Semiconductor Devices 1994, 2003
2SC4536
ELECTRICAL CHARACTERISTICS (TA = +25°C)
Parameter
DC Characteristics
Symbol
Test Conditions
MIN.
TYP.
MAX.
Unit
Collector Cut-off Current
Emitter Cut-off Current
DC Current Gain
ICBO
IEBO
h
VCB = 20 V, IE = 0 mA
VEB = 2 V, IC = 0 mA
–
–
–
–
–
5.0
5.0
200
µA
µA
–
FE Note 1
CE
C
V
= 10 V, I = 50 mA
60
RF Characteristics
2
S
21e
V
CE
= 10 V, I = 50 mA, f = 1 GHz
C
5.5
–
7.2
1.5
–
–
–
–
dB
dB
Insertion Power Gain
Noise Figure (1)
NFNote 2 VCE = 10 V, IC = 50 mA, f = 500 MHz
NFNote 2 VCE = 10 V, IC = 50 mA, f = 1 GHz
Noise Figure (2)
–
2.0
dB
VCE = 10 V, IC = 50 mA, RS = RL = 75 Ω,
VO = 105 dBµV/75 Ω, f1 = 190 MHz,
f2 = 90 MHz, f = f1 − f2
2nd Order Intermoduration Distortion
IM2
–
59.0
dBc
VCE = 10 V, IC = 50 mA, RS = RL = 75 Ω,
VO = 105 dBµV/75 Ω, f1 = 190 MHz,
f2 = 200 MHz, f = 2 × f1 − f2
3rd Order Intermoduration Distortion
IM3
–
82.0
–
dBc
Notes 1. Pulse measurement: PW ≤ 350 µs, Duty Cycle ≤ 2%
2. RS = RL = 50 Ω, tuned
hFE CLASSIFICATION
Rank
QR
QR
QS
QS
Marking
hFE Value
60 to 120
100 to 200
2
Data Sheet PU10338EJ01V0DS
2SC4536
TYPICAL CHARACTERISTICS (TA = +25°C)
TOTAL POWER DISSIPATION
vs. AMBIENT TEMPERATURE
REVERSE TRANSFER CAPACITANCE
vs. COLLECTOR TO BASE VOLTAGE
5
2 500
f = 1 MHz
= 0 mA
I
E
2 000
1 500
1 000
Ceramic Substrate
16 cm2 × 0.7 mm (t)
2
1
Rth (j-a) 62.5˚C/W
Free Air
0.5
Rth (j-a) 312.5˚C/W
500
400
0.2
0
25
50
75
100
125
(˚C)
150
1
5
10
30
Ambient Temperature T
A
Collector to Base Voltage VCB (V)
COLLECTOR CURRENT vs.
COLLECTOR TO EMITTER VOLTAGE
DC CURRENT GAIN vs.
COLLECTOR CURRENT
300
100
IB = 0.6 mA
VCE = 10 V
0.5 mA
0.4 mA
100
80
60
40
20
0.3 mA
50
30
0.2 mA
0.1 mA
10
0.1
0
10
20
1
10
100
1 000
Collector to Emitter Voltage VCE (V)
Collector Current I (mA)
C
GAIN BANDWIDTH PRODUCT
vs. COLLECTOR CURRENT
INSERTION POWER GAIN, MAXIMUM
POWER GAIN, MAG vs. FREQUENCY
10
5
V
CE = 10 V
= 50 mA
VCE = 10 V
I
C
G
max (u)
20
2
1
2
|S21e
|
MAG
10
0
0.5
0.2
5
10
30
50
100
(mA)
300
0.1
0.2 0.3
0.5
1
2
3
Collector Current I
C
Frequency f (GHz)
3
Data Sheet PU10338EJ01V0DS
2SC4536
INSERTION POWER GAIN, MAXIMUM POWER
GAIN, MAG vs. COLLECTOR CURRENT
NOISE FIGURE vs.
COLLECTOR CURRENT
10
5
4
3
2
1
0
MAG
V
CE = 10 V
f = 1 GHz
G
max (u)
8
6
4
2
|S21e
|
2
0
V
CE = 10 V
f = 1 GHz
10
30
50
100
(mA)
300
5
10
20
50
100
200
Collector Current I
C
Collector Current I (mA)
C
IM3, IM2+, IM2– vs.
COLLECTOR CURRENT
80
70
60
50
40
30
VCE = 10 V
IM
3
IM2+
IM2–
IM3 :VO = 110 dB
µ
V/75 Ω 2 tone each
f = 2 × 190 – 200 MHz
IM2+ :VO = 105 dB
µ
V/75 Ω 2 tone each
f = 90 + 100 MHz
IM2– :VO = 105 dB
µ
V/75 Ω 2 tone each
f = 190 – 90 MHz
10
30
50
100
300
Collector Current I
C
(mA)
Remark The graphs indicate nominal characteristics.
S-PARAMETERS
S-parameters/Noise parameters are provided on the NEC Compound Semiconductor Devices Web site in a form
(S2P) that enables direct import to a microwave circuit simulator without keyboard input.
Click here to download S-parameters.
[RF and Microwave] → [Device Parameters]
URL http://www.csd-nec.com/
4
Data Sheet PU10338EJ01V0DS
2SC4536
PACKAGE DIMENSIONS
3-PIN POWER MINIMOLD (UNIT: mm)
4.5±0.1
1.6±0.2
1.5±0.1
C
E
B
+0.03
–0.06
0.41
0.42±0.06
0.42±0.06
0.47±0.06
1.5
3.0
PIN CONNECTIONS
E : Emitter
C : Collector (Fin)
B : Base
(IEC : SOT-89)
5
Data Sheet PU10338EJ01V0DS
2SC4536
•
The information in this document is current as of May, 2003. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data
books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products
and/or types are available in every country. Please check with an NEC sales representative for
availability and additional information.
•
•
No part of this document may be copied or reproduced in any form or by any means without prior
written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document.
NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of
third parties by or arising from the use of NEC semiconductor products listed in this document or any other
liability arising from the use of such products. No license, express, implied or otherwise, is granted under any
patents, copyrights or other intellectual property rights of NEC or others.
•
•
•
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of customer's equipment shall be done under the full
responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third
parties arising from the use of these circuits, software and information.
While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize
risks of damage to property or injury (including death) to persons arising from defects in NEC
semiconductor products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment, and anti-failure features.
NEC semiconductor products are classified into the following three quality grades:
"Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products
developed based on a customer-designated "quality assurance program" for a specific application. The
recommended applications of a semiconductor product depend on its quality grade, as indicated below.
Customers must check the quality grade of each semiconductor product before using it in a particular
application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's
data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not
intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness
to support a given application.
(Note)
(1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd.
and also includes its majority-owned subsidiaries.
(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for
NEC (as defined above).
M8E 00. 4-0110
6
Data Sheet PU10338EJ01V0DS
2SC4536
For further information, please contact
NEC Compound Semiconductor Devices, Ltd.
5th Sales Group, Sales Division TEL: +81-44-435-1588 FAX: +81-44-435-1579 E-mail: salesinfo@csd-nec.com
NEC Compound Semiconductor Devices Hong Kong Limited
Hong Kong Head Office
Taipei Branch Office
Korea Branch Office
TEL: +852-3107-7303
TEL: +886-2-8712-0478 FAX: +886-2-2545-3859
TEL: +82-2-558-2120
FAX: +82-2-558-5209
http://www.ee.nec.de/
TEL: +49-211-6503-01 FAX: +49-211-6503-487
FAX: +852-3107-7309 E-mail: ncsd-hk@elhk.nec.com.hk
NEC Electronics (Europe) GmbH
California Eastern Laboratories, Inc.
http://www.cel.com/
TEL: +1-408-988-3500 FAX: +1-408-988-0279
0302-1
相关型号:
2SC4536-T1QS-A
RF Small Signal Bipolar Transistor, 0.25A I(C), 1-Element, Ultra High Frequency Band, Silicon, NPN, PLASTIC, POWER, MINIMOLD PACKAGE-3
NEC
2SC4537IS-TL
RF Small Signal Bipolar Transistor, 0.05A I(C), 1-Element, Ultra High Frequency Band, Silicon, NPN, CMPAK-3
HITACHI
2SC4537IS-TR
RF Small Signal Bipolar Transistor, 0.05A I(C), 1-Element, Ultra High Frequency Band, Silicon, NPN, CMPAK-3
HITACHI
©2020 ICPDF网 联系我们和版权申明