LSIR9033/TR1 [LIGITEK]
SURFACE MOUNT LED TAPE AND REEL; 表面安装型LED卷带型号: | LSIR9033/TR1 |
厂家: | LIGITEK ELECTRONICS CO., LTD. |
描述: | SURFACE MOUNT LED TAPE AND REEL |
文件: | 总8页 (文件大小:104K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
SURFACE MOUNT LED TAPE AND REEL
Pb
Lead-Free Parts
LSIR9033/TR1
DATA SHEET
SIR9033/TR1
DOC. NO : QW0905-L
E
REV.
:
26 - Dec
- 2005
DATE
:
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LSIR9033/TR1
Page 1/7
Package Dimensions
Cathode
4.6±0.5
2.5
0.4±0.1
0.5±0.1 2.0
ψ1.9
1.4
2.8
0.16
0.7
0.4
Note : 1.All dimension are in millimeter tolerance is ±0.2mm unless otherwise noted.
2.Specifications are subject to change without notice.
Carrier Type Dimensions
2.16
4.0
0.3
9.3
4.85
12¡ Ó0.3
5.5
Polarity
1.75
4.0
3.32
1.5
2.0
Note : The tolerances unless mentioned is ±0.2mm,Angle ±0.5. Unit=mm.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
LSIR9033/TR1
Page 2/7
PART NO.
Reel Dimensions
16.0±1.0
74.0±1.5
ψ178±2.0
14.2±1.0
Description
12.0mm tape,7"reel
Quantity/Reel
1500 devices
Features:
1. High radiant intensity.
2. Suitable for pulsed applications.
3. Low average degradation.
Descriptions:
The LSIR9033/TR1 series are super-high efficiency Gallium Aluminum Arsenide infrared
emitting diodes encapsulated in water clear plastic T-1 3/4 package individually
Device Selection Guide:
PART NO
MATERIAL
GaAIAs
LENS COLOR
Water Clear
LSIR9033/TR1
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 3/7
LSIR9033/TR1
PART NO.
Absolute Maximum Ratings at Ta=25 ℃
Ratings
Symbol
Parameter
UNIT
mW
SIR
100
Power Dissipation
PD
IFP
Peak Forward Current
(300PPS,1μs Pulse)
1
50
A
mA
V
IF
Forward Current
Reverse Voltage
5
Vr
Electrostatic Discharge
Operating Temperature
Storage Temperature
ESD
Topr
Tstg
2000
V
-55 ~ +100
-55 ~ +100
℃
℃
Max 260℃for 5 sec Max
Soldering Temperature
Tsol
(2mm from body)
Electrical Optical Characteristics (Aa=25℃)
Typ.
2.0
0.3
880
70
Max.
PARAMETER
Radiant Intensity
SYMBOL Min.
UNIT
mW/sr
mW/cm2
nm
TEST CONDITION
Le
Ee
1.2
IF=20mA
IF=20mA
IF=20mA
IF=20mA
IF=20mA
VR=5V
Aperture Radiant Incidence
Peak Emission Wavelength
Spectral Line Half Width
Forward Voltage
0.15
λpeak
△λ
VF
nm
1.4
1.7
V
Reverse Current
μA
100
IR
Viewing Angle
deg
2θ1/2
20
Note : 1.The forward voltage data did not including ±0.1V testing tolerance.
2. The radiant intensity data did not including ±15% testing tolerance.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LSIR9033/TR1
Page4/7
Typical Electro-Optical Characteristics Curve
SIR CHIP
Fig.1 Forward Current vs. Rorward Voltage
Fig.2 Relative Radiant Intensity vs. Wavelength
1.0
1000
100
10
1
0.5
0.0
0.1
750
800
850
900
950
1000 1050
0.5
1.0
1.5
2.0
2.5
Wavelength(nm)
Forward Voltage(V)
Fig.3 Relative Radiant Power
vs. Forward DC Current
Fig.4 Relative Radiant Power
vs. Forward Peak Current
10.0
10.0
1.0
1.0
0.1
0.1
1
10
100
10
100
1000
I
FPK(mA)
I
FDC(mA)
Fig.5 Forward DC Voltage vs. Temperature
Fig.6 Relative Radiant Power vs. Temperature
1.2
1.1
1.0
3.0
2.5
2.0
1.5
1.0
0.5
0.9
0.8
0.0
-40
-40 -20
0
20
40
60
80
100
-20
0
20
40
60
80
100
Ambient Temperature[℃]
Ambient Temperature[℃]
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page
PART NO. LSIR9033/TR1
5/7
Recommended Soldering Conditions
1. Hand Solder
Basic spec is ≦ 280℃ 3 sec one time only.
2. Wave Solder
Soldering heat Max. 260℃
245±5℃ within 5 sec
Preheat
120 ~ 150℃
120 ~ 180 sec
3-1. LEAD Reflow Solder
Temp.
(℃)
240
Rising
Cooling
+5℃/sec
-5℃/sec
Preheat
150
120
Time
5sec
60 ~ 120 sec
3-2 PB-Free Reflow Solder
1~5¢XC/sec
260¢XC MaX.
10sec.Max
Preheat
180~200¢XC
Above 220¢XC
60 sec.Max.
1~5¢XC/sec
120 sec.Max.
Reflow Soldering should not be done more than two times.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
LSIR9033/TR1
Page 6/7
PART NO.
Precautions For Use:
Storage time:
1.The operation of Temperatures and RH are : 5℃~35℃,RH60%.
2.Once the package is opened, the products should be used within a week.
Otherwise, they should be kept in a damp proof box with descanting agent.
Considering the tape life, we suggest our customers to use our products within
a year(from production date).
3.If opened more than one week in an atmosphere 5 ℃~ 35℃,RH60%,
they should be treated at 60℃±5 ℃fo r 15hrs.
Drive Method:
LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into
the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series
with the LED.
Consider worst case voltage variations than could occur across the current limiting resistor. The forwrd
current should not be allowed to change by more than 40 % of its desired value.
Circuit model A
LED
Circuit model B
LED
(A) Recommended circuit.
(B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED.
Cleaning:
Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED.
ESD(Electrostatic Discharge):
Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic
glove is recommended when handing these LED. All devices, equipment and machinery must be properly
grounded.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LSIR9033/TR1
Page 7/7
Reliability Test:
Reference
Standard
Description
Test Item
Test Condition
1.Under Room Temperature
2.If=20mA
3.t=1000 hrs (-24hrs, +72hrs)
This test is conducted for the purpose
of detemining the resisance of a part
in electrical and themal stressed.
MIL-STD-750: 1026
MIL-STD-883: 1005
JIS C 7021: B-1
Operating Life Test
The purpose of this is the resistance of
the device which is laid under ondition
of high temperature for hours.
High Temperature
Storage Test
1.Ta=105℃±5℃
2.t=1000 hrs (-24hrs, +72hrs)
MIL-STD-883:1008
JIS C 7021: B-10
The purpose of this is the resistance
of the device which is laid under
condition of low temperature for hours.
Low Temperature
Storage Test
1.Ta=-40℃±5℃
2.t=1000 hrs (-24hrs, +72hrs)
JIS C 7021: B-12
1.Ta=65℃±5℃
2.RH=90 %~95%
3.t=240hrs ±2hrs
High Temperature
High Humidity Test
The purpose of this test is the resistance
of the device under tropical for hous.
MIL-STD-202:103B
JIS C 7021: B-11
The purpose of this is the resistance of
the device to sudden extreme changes
in high and low temperature.
1.Ta=105℃±5℃&-40℃±5℃
(10min) (10min)
2.total 10 cycles
MIL-STD-202: 107D
MIL-STD-750: 1051
MIL-STD-883: 1011
Thermal Shock Test
This test intended to determine the
thermal characteristic resistance
of the device to sudden exposures
at extreme changes in temperature
when soldering the lead wire.
MIL-STD-202: 210A
MIL-STD-750: 2031
JIS C 7021: A-1
Solder Resistance
Test
1.T.Sol=260 ℃±5℃
2.Dwell time= 10 ±1sec.
MIL-STD-202: 208D
MIL-STD-750: 2026
MIL-STD-883: 2003
JIS C 7021: A-2
This test intended to see soldering well
performed or not.
1.T.Sol=230 ℃±5℃
2.Dwell time=5 ±1sec
Solderability Test
相关型号:
©2020 ICPDF网 联系我们和版权申明