AP10E070039B [ETC]

AP.10E - 1 Stage 15dB 39mm 0.81 with IPEX MHFI; AP.10E - 1级15分贝39毫米0.81与IPEX MHFI
AP10E070039B
型号: AP10E070039B
厂家: ETC    ETC
描述:

AP.10E - 1 Stage 15dB 39mm 0.81 with IPEX MHFI
AP.10E - 1级15分贝39毫米0.81与IPEX MHFI

文件: 总12页 (文件大小:1028K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
AP.10E.07.0039B  
Specification  
Part No.  
AP.10E.07.0039B  
AP.10E - 1 Stage 15dB 39mm 0.81 with IPEX MHFI  
(U.FL compatible)  
Product Name  
World smallest GPS active patch  
High performance  
Feature  
Ultra low power consumption  
RoHS Compliant  
SPE-12-8-003/B/SS  
|
page 1 of 12  
1. Introduction  
AP.10E active GPS patch antenna is the  
smallest GPS high performance antenna  
currently available in the world. Using  
extremely sensitive high dielectric constant  
powder formulation and tight process con-  
trol the 10*10*4mm patch antenna is ac-  
curately tuned to have its frequency band  
right at 1575.42MHz for GPS systems. With  
an ultra low power consumption one stage  
LNA , this small active patch has the per-  
formance of an ordinary active patch, but  
at only a quarter of the size. This product is  
suited to small form factor mobile devices  
such as GPS Smartphones, Personal Loca-  
tion, Medical devices, Telematic devices  
and Automotive navigation and tracking.  
Custom gain, connector and cable versions  
are available. The AP.10E consists of 2  
functional blocks – the LNA and also the  
patch antenna.  
ANTENNA  
LNA  
SAW Filter  
I-PEX + cable  
SPE-12-8-003/B/SS  
|
page 2 of 12  
2. Specification  
2.1 Patch Antenna  
Parameter  
Specification  
1575.42 ± 1.023MHz  
-10dBic Typ. @ Zenith  
RHCP  
Frequency  
Gain @ Zenith  
Polarization  
Axial Ratio  
4.0dB max @ Zenith  
10*10*4.0mm  
Patch Dimension  
2.2 LNA  
Parameter  
Specification  
1575.42 ± 1.023MHz  
F0=1575.42MHz  
Frequency  
Outer Band Attenuation  
F0±30MHz 9dB min.  
F0±50MHz 20dB min.  
F0±100MHz 25dB min.  
50Ω  
Output Impedance  
2.0 Max  
Output VSWR  
Typ. -2dBm  
Min. -6dBm  
Pout at 1dB Gain  
Compression point  
LNA Gain, Power Consumption and Noise Figure  
Voltage  
LNA Gain (Typ)  
14dB  
Power Consumption(mA) Typ  
Noise Figure Typ  
2.5dB  
Min. 1.8V  
Typ. 3.0V  
Max. 5.5V  
3mA  
3mA  
3mA  
15dB  
2.5dB  
15dB  
2.6dB  
2.3 Cable* & Connector  
Parameter  
RF Cable  
Specification  
Coaxial Cable Ø 0.81 ± 0.1mm, length 39 ± 2.0mm  
IPEX MHFI (U.FL)  
Connector  
SPE-12-8-003/B/SS  
|
page 3 of 12  
3. LNA Gain and Out Band Rejection @3.0V  
Tr1 S21 Log Mag 10.00dB/ Ref -40.00dB (F2)  
60.00  
>1 1.5754200 GHz 15.028 dB  
50.00  
40.00  
30.00  
1
20.00  
10.00  
3
0.000  
-10.00  
-20.00  
-30.00  
-40.00  
5
1
7
6
2
4
1 Center 1.57542 GHz  
IFBW 70 kHz  
Span 400 MHz 20/20 Cor  
Cg1 Tr1 S21  
Cg1 Tr1 S21  
Cg1 Tr1 S21  
Cg1 Tr1 S21  
Cg1 Tr1 S21  
Cg1 Tr1 S21  
Cg1 Tr1 S21  
>1  
2
1.5754200 GHz  
1.6054200 GHz  
1.5454200 GHz  
1.6254200 GHz  
1.5254200 GHz  
1.6754200 GHz  
1.4754200 GHz  
15.028  
dB  
-20.790 dB  
5.4162 dB  
-24.871 dB  
-9.3837 dB  
-15.459 dB  
-15.752 dB  
3
4
5
6
7
SPE-12-8-003/B/SS  
|
page 4 of 12  
4. LNA Noise Figure @3.0V  
Mkr1  
1.5754 GHz  
2.546 dB  
15.359 dB  
9.000  
NFIG  
Scale/  
1.000  
dB  
1
-1.000  
40.00  
GAIN  
Scale/  
5.000  
dB  
1
-10.00  
Center 1.57542 GHz BW 4 MHz  
Tcold 296.50 K Avgs 16  
Points 11  
Att 0/ - - dB  
Span 3.00 MHz  
Loss Off  
Corr  
5. Total Specification (through Antenna, LNA, Cable and Connector)  
Parameter  
Specification  
1575.42 ± 1.023MHz  
At 3V: 5 ± 4dBic @ 90°  
50Ω  
Frequency  
Gain  
Output Impedance  
Polarization  
RHCP  
Max 2.0  
Output VSWR  
Operation Temperature  
Storage Temperature  
Relative Humidity  
Input Voltage  
Antenna  
-40°C to + 85°C  
-40°C to + 85°C  
40% to 95%  
Min. 1.8V, Typ. 3.0V, Max. 5.5V  
10*10*5.9mm  
SPE-12-8-003/B/SS  
|
page 5 of 12  
6. Radiation Patterns  
6.1 XZ Plane Radiation  
0
-8  
-10  
-15  
-20  
-25  
-30  
-35  
-40  
90  
270  
180  
Pattern  
Model No.  
Test Mode Freq (MHz) Max Gain(dBi)  
XZ 1624.00 -9.27 / 163.26  
Min Gain(dBi)  
Avg. Gain(dBi) Source Polar.  
1
AP.10E.07.0039B  
-13.80 / 68.02  
-11.23  
RHCP  
SPE-12-8-003/B/SS  
|
page 6 of 12  
6.2 YZ Plane Radiation  
0
-8  
-10  
-15  
-20  
-25  
-30  
-35  
-40  
90  
270  
180  
Pattern  
Model No.  
Test Mode Freq (MHz)  
YZ 1624.00  
Max Gain(dBi)  
Min Gain(dBi)  
Avg. Gain(dBi) Source Polar.  
1
AP.10E.07.0039B  
-12.30 / 352.00 -29.55 / 216.00  
-16.23  
RHCP  
SPE-12-8-003/B/SS  
|
page 7 of 12  
6.3 XY Plane Radiation  
0
-8  
-10  
-15  
-20  
-25  
-30  
-35  
-40  
90  
270  
180  
Pattern  
Model No.  
Test Mode  
Freq (MHz)  
1624.00  
Max Gain(dBi)  
Min Gain(dBi)  
Avg. Gain(dBi)  
-11.23  
Source Polar.  
RHCP  
1
2
AP.10E.07.0039B  
AP.10E.07.0039B  
XZ  
YZ  
-9.27 / 163.26  
-13.80 / 68.02  
1624.00  
-12.30 / 352.00 -29.55 / 216.00  
-16.23  
RHCP  
SPE-12-8-003/B/SS  
|
page 8 of 12  
7. Technical Drawing  
Top  
AP.10E  
B
Side  
Bottom  
"A"  
P/N  
Name  
Material  
Finish  
QTY  
NOTE:  
1
AP.10E Patch (10*10*4mm) AP.10E  
Ceramic  
Clear  
1
1. Soldered area  
2. Shielding case area  
3. All material must be RoHS compliant.  
4. The connector orientation has a fixed  
position to the antenna as per drawing.  
2
0.81 Coaxial Cable  
IPEX MHF1  
OD.081.CM  
FEP  
Gray  
1
1
1
1
3
4
5
IPEX.MHFI.113 Brass  
Gold  
Shielding Case  
PCB  
Tin (SPTE) Tin Plated  
FR4 0.5t Green  
SPE-12-8-003/B/SS  
|
page 9 of 12  
7.1 Connector Drawing  
B
IPEX MHF 1  
SPE-12-8-003/B/SS | page 10 of 12  
8. Plugs Usage Precautions  
8.I Mating / unmating  
(1) To disconnect connectors, insert the  
end portion of I-PEX under the connector  
flanges and pull off vertically, in the direc-  
tion of the connector mating axis.  
(2) To mate the connectors, the mating  
Do not attempt to insert on an  
extreme angle.  
axes of both connectors must be aligned  
and the connectors can be mated. The  
“click” will confirm fully mated connection.  
2
Coaxial Cable  
PLUG  
1
Pulling Tool  
P/N : 90192-001  
RECEPTACLE  
8.2 Pull forces on the cable after connectors are mated  
After the connectors are mated, do not  
apply a load to the cable in excess of the  
values indicated in the diagram below.  
2N MAX.  
PLUG  
4N MAX.  
2N MAX.  
RECE  
Coaxial Cable  
SPE-12-8-003/B/SS | page 11 of 12  
9. Packaging  
Taoglas makes no warranties based on the  
accuracy or completeness of the contents  
of this document and reserves the right to  
make changes to specifications and  
product descriptions at any time  
without notice.  
contained herein. Reproduction, use or  
disclosure to third parties without  
express permission is strictly prohibited.  
Copyright © Taoglas Ltd.  
Taoglas reserves all rights to this document  
and the information  
SPE-12-8-003/B/SS | page 12 of 12  

相关型号:

AP10F070039B

2 Stage 25dB 10mm Active Ceramic Patch Antenna 39mm 0.81 Micro Coax with IPEX MHFI with Front End SAW Filter
ETC

AP10G01

10mm SMT 14dB Active GPS Patch Antenna With Front End Saw Filter
ETC

AP10H01

10mm SMT 25dB Active GPS Patch Antenna With Front End Saw Filter
ETC

AP10N60W

N-CHANNEL ENHANCEMENT MODE POWER MOSFET
A-POWER

AP10N70I-A

N-CHANNEL ENHANCEMENT MODE POWER MOSFET
A-POWER

AP10N70I-A-HF

N-CHANNEL ENHANCEMENT MODE POWER MOSFET
A-POWER

AP10N70P

TRANSISTOR 10 A, 600 V, 0.6 ohm, N-CHANNEL, Si, POWER, MOSFET, TO-220AB, ROHS COMPLIANT, TO-220, 3 PIN, FET General Purpose Power
A-POWER

AP10N70P-A

N-CHANNEL ENHANCEMENT MODE POWER MOSFET
A-POWER

AP10N70P_07

N-CHANNEL ENHANCEMENT MODE POWER MOSFET
A-POWER

AP10N70R

N-CHANNEL ENHANCEMENT MODE POWER MOSFET
A-POWER

AP10N70R-A

TRANSISTOR 10 A, 650 V, 0.6 ohm, N-CHANNEL, Si, POWER, MOSFET, TO-262AA, ROHS COMPLIANT, TO-262, 3 PIN, FET General Purpose Power
A-POWER

AP10N70S

N-CHANNEL ENHANCEMENT MODE POWER MOSFET
A-POWER