UPG158TB [CEL]
W L, S-BAND SPDT SWITCH; W L， S波段SPDT开关
| 型号： | UPG158TB |
| 厂家： | 
CALIFORNIA EASTERN LABS |
| 描述： | W L, S-BAND SPDT SWITCH |
| 文件： | 总8页 (文件大小：212K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NEC's ½W
L, S-BAND SPDT SWITCH
UPG158TB
FEATURES
DESCRIPTION
NEC's UPG158TB is a GaAs MMIC L, S-band SPDT (Single
Pole Double Throw) switch developed for mobile phone and
L, S-band applications.
• SWITCH CONTROL VOLTAGE:
Vcont (H) = 2.5 to 5.3 V (3.0 V TYP.)
Vcont (L) = −0.2 to +0.2 V (0 V TYP.)
This device can operate from 0.5 to 2.5 GHz, with low insertion
loss and high isolation.
• LOW INSERTION LOSS:
LINS1 = 0.30 dB TYP. @ f = 0.5 to 1.0 GHz, Vcont = 3.0 V/0 V
LINS2 = 0.40 dB TYP. @ f = 2.0 GHz, Vcont = 3.0 V/0 V
LINS3 = 0.90 dB MAX. @ f = 2.0 to 2.5 GHz, Vcont = 3.0 V/0 V
This device is housed in a 6-pin super minimold package. And
this package is able to high-density surface mounting.
• HIGH ISOLATION:
ISL1 = 27 dB TYP. @ f = 0.5 to 2.0 GHz, Vcont = 3.0 V/0 V
ISL2 = 18 dB MIN. @ f = 2.0 to 2.5 GHz, Vcont = 3.0 V/0 V
APPLICATIONS
• L-band digital cellular or cordless telephone
• PCS, W-LAN, WLL and BluetoothTM
• Short Range Wireless
• POWER HANDLING:
Pin (1 dB) = +26.5 dBm TYP. @ f = 1.0 GHz, Vcont = 3.0 V/0 V
• HIGH-DENSITY SURFACE MOUNTING:
6-pin super minimold package (2.0 × 1.25 × 0.9 mm)
ORDERING INFORMATION
Part Number
Package
Marking
Supplying Form
UPG158TB-E3
6-pin super minimold
G1M
• Embossed tape 8 mm wide
• Pin 1, 2, 3 face the perforation side of the tape
• Qty 3 kpcs/reel
Remark To order evaluation samples, contact your nearby sales ofÞce.
Part number for sample order: UPG158TB
Caution Observe precautions when handling, because these devices are sensitive to electrostatic discharge.
California Eastern Laboratories
UPG158TB
PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM
(Top View)
(Top View)
(Bottom View)
Pin No.
Pin Name
1
2
3
4
5
6
OUTPUT1
GND
3
2
1
4
5
6
3
2
1
4
5
6
4
5
6
3
2
1
OUTPUT2
Vcont2
INPUT
Vcont1
TRUTH TABLE
Vcont1
Vcont2
High
Low
INPUT−OUTPUT1
INPUT−OUTPUT2
Low
ON
OFF
ON
High
OFF
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise speciÞed)
Parameter
Switch Control Voltage
Input Power
Symbol
Vcont
Pin
Ratings
Unit
Note 1
−6.0 to +6.0
V
+28
dBm
mW
°C
Note 2
Power Dissipation
PD
150
Operating Ambient Temperature
Storage Temperature
TA
−45 to +85
−55 to +150
Tstg
°C
Notes 1. | Vcont1 − Vcont2 | ≤ 6.0 V
2. Mounted on double-sided copper-clad 50 × 50 × 1.6 mm epoxy glass PWB,
TA = +85°C
RECOMMENDED OPERATING RANGE (TA = 25°C, unless otherwise speciÞed)
Parameter
Symbol
Vcont (H)
Vcont (L)
MIN.
2.5
TYP.
3.0
0
MAX.
5.3
Unit
V
Switch Control Voltage (H)
Switch Control Voltage (L)
−0.2
0.2
V
UPG158TB
ELECTRICAL CHARACTERISTICS
(TA = +25°C, Vcont = 3.0 V/0 V, DC blocking capacitors = 51 pF, unless otherwise speciÞed)
Parameter
Symbol
Test Conditions
MIN.
TYP.
MAX.
Unit
−
−
Insertion Loss 1
LINS1
LINS2
f = 0.5 to 1.0 GHz
0.30
0.40
−
0.55
dB
dB
Insertion Loss 2
f = 2.0 GHz
0.65
−
Insertion Loss 3
LINS3
f = 2.0 to 2.5 GHz
f = 0.5 to 2.0 GHz
f = 2.0 to 2.5 GHz
f = 0.5 to 2.0 GHz
f = 2.0 to 2.5 GHz
f = 0.5 to 2.0 GHz
f = 2.0 to 2.5 GHz
f = 1.0 GHz
0.90
−
dB
Isolation 1
ISL1
22
18
13
11
27
−
dB
−
Isolation 2
ISL2
dB
−
Input Return Loss 1
Input Return Loss 2
Output Return Loss 1
Output Return Loss 2
1 dB Loss Compression
RLin1
RLin2
RLout1
RLout2
Pin (1 dB)
19
−
dB
−
dB
−
13
11
19
−
dB
−
dB
−
+22.0
+26.5
dBm
Note
Input Power
−
−
Switch Control Speed
tSW
50
200
10
ns
A
Switch Control Current
Icont
0.5
Note Pin (1 dB) is measured the input power level when the insertion loss increases 1 dB more than that of linear range.
STANDARD CHARACTERISTICS FOR REFERENCE
(TA = +25°C, Vcont = 3.0 V/0 V, DC blocking capacitors = 51 pF, unless otherwise speciÞed)
Parameter
Symbol
Test Conditions
f = 1.0 GHz
MIN.
TYP.
MAX.
Unit
−
−
0.1 dB Loss Compression
Pin (0.1 dB)
+23.0
dBm
Note
Input Power
Note Pin (0.1 dB) is measured the input power level when the insertion loss increases 0.1 dB more than that of linear range.
Caution It is necessary to use DC blocking capacitors with this device.
The value of DC blocking capacitors should be chosen to accommodate the frequency of operation, bandwidth, switching
speed and the condition with the actual board of your system. The range of recommended DC blocking capacitor value is
less than 100 pF.
UPG158TB
EVALUATION CIRCUIT
(Vcont = 3.0 V/0 V, DC blocking capacitors = 51 pF)
Vcont2
INPUT
Vcont1
51 pF
1 000 pF
1 000 pF
4
5
6
3
2
1
51 pF
51 pF
OUTPUT2
OUTPUT1
The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.
UPG158TB
ILLUSTRATION OF THE TEST CIRCUIT ASSEMBLED ON EVALUATION BOARD
Vcont1
6pin SMM SPDT SW
Vc1
OUTPUT1
OUT 1
C2
C2
C1
C1
C3
INPUT
C1
IN
OUT 2
OUTPUT2
Vc2
Vcont2
USING THE NEC EVALUATION BOARD
Symbol
Values
C1, C2, C3
C4, C5
51 pF
1 000 pF
5-144
UPG158TB
TYPICAL CHARACTERISTICS
(TA = +25°C, Vcont = 3.0 V/0 V, Pin = 0 dBm, unless otherwise speciÞed)
OUT1
IN
OUT2
50 Ω
IN-OUT1
IN-OUT1
INPUT RETURN LOSS vs. FREQUENCY
ISOLATION vs. FREQUENCY
CH1 S11 log MAG
10 dB/ REF 0 dB
CH1 S21 log MAG
10 dB/ REF 0 dB
1: -23.433 dB
1 GHz
1: -28.047 dB
MARKER 1
1 GHz
MARKER 1
1 GHz
1 GHz
2: -30.102 dB
1.5 GHz
2: -28.565 dB
1.5 GHz
3: -25.504 dB
2 GHz
3: -25.835 dB
2 GHz
4: -16.018 dB
2.5 GHz
4: -22.507 dB
2.5 GHz
0
0
-10
-10
-20
-30
-40
1
-20
1
4
4
-30
-40
3
3
2
2
START 0.300 000 000 GHz
STOP 3.300 000 000 GHz
START 0.300 000 000 GHz
STOP 3.300 000 000 GHz
Frequency f (GHz)
Frequency f (GHz)
IN-OUT1
INSERTION LOSS vs. FREQUENCY
IN-OUT1
OUTPUT RETURN LOSS vs. FREQUENCY
CH1 S21 log MAG
1 dB/ REF 0 dB
CH1 S22 log MAG
10 dB/ REF 0 dB
1: -0.574 dB
1 GHz
1: -22.502 dB
1 GHz
MARKER 1
1 GHz
MARKER 1
1 GHz
2: -0.662 dB
1.5 GHz
2: -28.139 dB
1.5 GHz
3: -0.795 dB
2 GHz
3: -25.867 dB
2 GHz
4: -1.111 dB
2.5 GHz
4: -15.601 dB
2.5 GHz
1
0
0
-1
-10
2
3
1
4
-2
-3
-4
-20
4
-30
-40
3
2
START 0.300 000 000 GHz
STOP 3.300 000 000 GHz
START 0.300 000 000 GHz
STOP 3.300 000 000 GHz
Frequency f (GHz)
Frequency f (GHz)
Caution Data includes loss of the test fixture.
Remark The graphs indicate nominal characteristics.
5-145
UPG158TB
PACKAGE DIMENSIONS
6-PIN SUPER MINIMOLD (UNIT: mm)
2.1±0.1
1.25±0.1
0.1 MIN.
5-146
UPG158TB
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering
methods and conditions other than those recommended below, contact your nearby sales ofÞce.
Soldering Method
Soldering Conditions
Condition Symbol
Infrared Reßow
Peak temperature (package surface temperature)
Time at peak temperature
Time at temperature of 220°C or higher
Preheating time at 120 to 180°C
Maximum number of reßow processes
Maximum chlorine content of rosin ßux (% mass)
: 260°C or below
: 10 seconds or less
: 60 seconds or less
: 120±30 seconds
: 3 times
IR260
: 0.2%(Wt.) or below
VPS
Peak temperature (package surface temperature)
Time at temperature of 200°C or higher
Preheating time at 120 to 150°C
Maximum number of reßow processes
Maximum chlorine content of rosin ßux (% mass)
: 215°C or below
: 25 to 40 seconds
: 30 to 60 seconds
: 3 times
VP215
WS260
HS350
: 0.2%(Wt.) or below
Wave Soldering
Partial Heating
Peak temperature (molten solder temperature)
Time at peak temperature
Preheating temperature (package surface temperature) : 120°C or below
Maximum number of ßow processes
Maximum chlorine content of rosin ßux (% mass)
: 260°C or below
: 10 seconds or less
: 1 time
: 0.2%(Wt.) or below
Peak temperature (pin temperature)
: 350°C or below
Soldering time (per side of device)
Maximum chlorine content of rosin ßux (% mass)
: 3 seconds or less
: 0.2%(Wt.) or below
Caution
Do not use different soldering methods together (except for partial heating).
Life Support Applications
These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably
be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and
agree to fully indemnify CEL for all damages resulting from such improper use or sale.
03/08/2004
A Business Partner of NEC Compound Semiconductor Devices, Ltd.
5-147
相关型号：
UPG168TB
SPDT, 500MHz Min, 2500MHz Max, 0.9dB Insertion Loss-Max, 2 X 1.25 MM, 0.90 MM HEIGHT, SUPER MINIMOLD PACKAGE-6
NEC
UPG168TB-A
SPDT, 500MHz Min, 2500MHz Max, 0.9dB Insertion Loss-Max, 2 X 1.25 MM, 0.90 MM HEIGHT, SUPER MINIMOLD PACKAGE-6
NEC
UPG168TB-E4-A
SPDT, 500MHz Min, 2500MHz Max, 0.9dB Insertion Loss-Max, 2 X 1.25 MM, 0.90 MM HEIGHT, SUPER MINIMOLD PACKAGE-6
NEC
©2020 ICPDF网 联系我们和版权申明