TFS170D [VECTRON]
Filter specification; 过滤器规格型号: | TFS170D |
厂家: | Vectron International, Inc |
描述: | Filter specification |
文件: | 总5页 (文件大小:275K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Filename: tfs 170d.doc
Version 1.2
10.03.2006
VI TELEFILTER
Filter specification
TFS 170D
1/5
Measurement condition
Ambient temperature:
Input power level:
Terminating impedance: *
Input:
23
0
°C
dBm
1250 Ω || -3,3 pF
1250 Ω || -3,3 pF
150 nH
Output:
External Coil:
Characteristics
Remark:
The reference level for the relative attenuation a of the TFS 170D is the minimum of the pass band attenuation. This value is defined as the insertion
rel
loss a . The nominal frequency f is fixed at 170,2 MHz without any tolerance. The values of relative attenuation a
operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme.
are guaranteed for the whole
e
N
rel
D a t a
typ. value
tolerance / limit
a
3,8
dB
max.
5,0
dB
Insertion loss
(reference level)
e
fN
-
-
170,2
MHz
Nominal frequency
Passband
PB
fN
± 100,0 kHz
BW
Bandwidth
3
dB
320
kHz
max.
350
kHz
a
Relative attenuation
rel
fN
fN
fN
fN
fN
fN
fN
fN
fN
±
±
-
-
-
100
600
800
kHz
kHz
kHz
MHz
MHz
MHz
MHz
MHz
MHz
1,2
37
dB
dB
dB
dB
dB
dB
dB
dB
dB
max.
min.
min.
min.
min.
min.
min.
min.
min.
3
27
31
50
46
50
31
46
50
dB
dB
dB
dB
dB
dB
dB
dB
dB
…
…
…
…
…
…
…
…
fN
fN
fN
fN
fN
fN
fN
fN
±
-
-
-
-
+
+
+
800
2,3
2,5
18,0
36,0
2,4
kHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
51
54
51
56
40
51
53
2,3
2,5
18,0
800,0
2,4
-
+
+
+
12,0
36,0
12,0
0,6
µs
max.
1
µs
Group delay ripple within PB
-
max.
0
dBm
Input power level
OTR
-
-
- 20 °C ... + 80°C
- 40 °C ... + 85°C
Operating temperature range
Storage temperature range
+ 25
°C
Frequency inversion temperature
TC **
- 0,036 ppm/K2
Temperature coefficient of frequency
f
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference
values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.
**) ∆f(Hz) = TC (ppm/K²) x (T-T0)² x f (MHz)
f
To
Generated:
Checked / Approved:
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 170d.doc
Version 1.2
10.03.2006
VI TELEFILTER
Filter specification
TFS 170D
2/5
Filter characteristic
0
-10
0
9
8
-1
-2
-20
-30
-40
-50
-60
-70
7
6
5
4
3
-3
-4
-5
-6
-7
-8
-9
2
-10
168
169
170
171
172
169.9
170
170.1
frequency in MHz
170.2
170.3
170.4
170.5
frequency in MHz
Construction and pin connection
(All dimensions in mm)
+0,2
9,1
-0,1
1
2
3
4
5
6
7
8
9
Output
Output
Ground
Ground
Ground
Input
TFS 170D
●
U10
Input
Ground
Ground
Ground
1
Date code
10
5,08
1
3
Date code: Year + week
U
V
W
...
2006
2007
2008
8
6
0,8
1
50 Ω Test circuit
6
7
1
2
L2
L4
L1
L3
C2
C1
SAW
3
L5
4, 5, 8, 9, 10
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 170d.doc
Version 1.2
10.03.2006
VI TELEFILTER
Filter specification
TFS 170D
3/5
Stability characteristics, reliability
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 1 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Change of
temperature:
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
4. Resistance to
solder heat (reflow):
reflow possible: twice max.;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
This filter is RoHS compliant (2002/95/EG, 2005/618/EG)
Packing
Tape & Reel:
IEC 286 – 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer:
min. 300 mm
min. 500 mm
min. 300 mm
Pull Off Direction
P1
Tape (all dimensions in mm)
Date Code
W
: 16,00 ± 0,3
Po
P2
t
Do
Po
Do
E
F
G(min)
P2
:
:
:
:
:
:
4,00 ± 0,1
1,50 +0,1/-0
1,75 ± 0,10
7,50 ± 0,10
0,60
2,00 ± 0,1
P1
: 12,00 ± 0,1
D1(min)
Ao
Bo
:
:
:
1,50 +0,1/-0
7,60 ± 0,10
9,60 ± 0,10
Ko
Typ
PIN Marker
D1
Ao
Ct
: 13,5
W
2
Reel (all dimensions in mm)
A
:330
W1
: 16,4
W2(max) : 22,4
N(min)
C
: 50
: 13,0
C
A
N
W
1
The minimum bending radius is 45 mm.
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 170d.doc
Version 1.2
10.03.2006
VI TELEFILTER
Filter specification
TFS 170D
4/5
Air reflow temperature conditions
Conditions
Exposure
Average ramp-up rate (30°C to 217°C)
> 100°C
less than 3°C/second
between 300 and 600 seconds
> 150°C
> 217°C
Peak temperature
between 240 and 500 seconds
between 30 and 150 seconds
max. 260°C
Time within 5°C of actual peak temperature
Cool-down rate (Peak to 50°C)
Time from 30°C to Peak temperature
between 10 and 30 seconds
less than 6°C/second
no greater than 300 seconds
Chip-mount air reflow profile
Temperature / °C
max. 260°C
217°C
Time / s
max. 300 s
10 ... 30 s
30 ... 150 s
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 170d.doc
Version 1.2
10.03.2006
VI TELEFILTER
Filter specification
TFS 170D
5/5
History
Version
1.0
Reason of Changes
- Generation of development specification
- Generation of filter specification, added typical values and filter characteristic Martens
Name
Date
Roßbach
29.01.1998
14.06.2005
10.03.2006
1.1
1.2
- Add external coil
Alawneh
- Correct stabitiy characteristics
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
相关型号:
©2020 ICPDF网 联系我们和版权申明