TFS172B [VECTRON]

Filter specification; 过滤器规格
TFS172B
型号: TFS172B
厂家: Vectron International, Inc    Vectron International, Inc
描述:

Filter specification
过滤器规格

过滤器
文件: 总5页 (文件大小:278K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Filename: tfs 172b.doc  
Version 1.3  
30.04.2004  
VI TELEFILTER  
Filter specification  
TFS 172B  
1/5  
Measurement condition  
Ambient temperature:  
Input power level:  
Terminating impedances *): input:  
output:  
23  
0
°C  
dBm  
180 || -3,4 pF  
180 || -3,4 pF  
Source:  
Load:  
200  
200  
Characteristics  
Remark:  
The reference level for the relative attenuation a of the TFS 172B is the minimum of the pass band attenuation a  
. The minimum of the pass band  
rel  
min  
attenuation a  
min  
is defined as the insertion loss a . The centre frequency f is the arithmetic mean value of the upper and lower frequencies at the 3 dB  
e c  
filter attenuation level relative to the insertion loss a . The nominal frequency f is fixed at 172,8 MHz without any tolerance. The given values for both the  
e
N
relative attenuation a and the group delay ripple have to be achieved at the frequencies given below even if the centre frequency f is shifted due to the  
rel  
c
temperature coefficient of frequency TC in the operating temperature range and due to a production tolerance for the centre frequency f .  
f
c
D a t a  
typ. value  
tolerance / limit  
Insertion loss  
a
= a  
max.  
4,0  
2,0  
dB  
e
min  
(reference level)  
3,1  
dB  
min.  
dB  
Nominal frequency  
Centre frequency  
fN  
fC  
172,8  
MHz  
172,8  
MHz  
Pass band  
4,42 MHz  
fN  
±
Pass band ripple  
Relative attenuation  
0,5  
dB  
max.  
0,8  
dB  
a
rel  
fN  
fN  
-
+
172,5  
30,2  
MHz  
MHz  
fN  
fN  
-
+
29,8  
827,2  
MHz  
MHz  
54  
53  
dB  
dB  
min.  
min.  
40  
40  
dB  
dB  
Group delay ripple within PB  
VSWR within PB  
70  
ns  
max.  
max.  
max.  
100  
ns  
1,5 : 1  
2,5 : 1  
10  
Input power level  
-
dBm  
Operating temperature range  
Storage temperature range  
OTR  
-
-
- 10 °C ... + 85°C  
- 30 °C ... + 90°C  
-
Temperature coefficient of frequency  
TC **  
-78  
ppm/K  
f
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference values  
only. Should there be additional questions, do not hesitate to ask for an application note or contact our design team.  
**) f(Hz) = TC (ppm/K) x (T-T0) x f (MHz).  
f
To  
generated:  
checked / approved:  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 172b.doc  
Version 1.3  
30.04.2004  
VI TELEFILTER  
Filter specification  
TFS 172B  
2/5  
Filter characteristic  
0
-10  
-20  
-30  
0
-0.5  
-1  
0.5  
0.45  
0.4  
-1.5  
0.35  
-40  
-2  
0.3  
B
d
B
d
s
n
i
n
i
µ
-50  
-60  
-2.5  
-3  
0.25  
e
d
u
e
d
u
n
i
y
t
i
t
i
a
l
n
n
e
d
0.2  
g
g
a
a
m
m
-70  
-3.5  
-4  
0.15  
0.1  
0.05  
0
-80  
-90  
-4.5  
-5  
-100  
200  
300  
400  
500  
600  
700  
800  
900  
1000  
166  
168  
170  
172  
174  
176  
1778  
frequency in MHz  
frequency in MHz  
Construction and pin connection  
(All dimensions in mm)  
1
2
3
4
5
6
7
8
Ground  
Ground  
Ground  
Output  
Ground  
Output  
Ground  
Ground  
Ground  
Input  
S 172B  
S18  
9
10  
11  
12  
Ground  
Input  
Date code: Year + week  
S
T
U
...  
2004  
2005  
2006  
50 Test circuit  
10  
4
6
L2  
L4  
C2  
12  
L3  
1, 2, 3, 5, 7, 8, 9, 11  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 172b.doc  
Version 1.3  
30.04.2004  
VI TELEFILTER  
Filter specification  
TFS 172B  
3/5  
Stability characteristics  
After the following tests the filter shall meet the whole specification:  
1. Shock:  
500g, 18 ms, half sine wave, 3 shocks each plane;  
DIN IEC 68 T2 - 27  
2. Vibration:  
10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans;  
DIN IEC 68 T2 - 6  
3. Change of  
temperature:  
-55 °C to 125°C / 30 min. each / 10 cycles  
DIN IEC 68 part 2 – 14 Test N  
4. Resistance to  
solder heat (reflow):  
reflow possible: twice max.;  
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;  
Packing  
Tape & Reel:  
IEC 286 – 3, with exeption of value for N and minimum bending radius;  
tape type II, embossed carrier tape with top cover tape on the upper side;  
max. pieces of filters peer reel:  
reel of empty components at start:  
reel of empty components at start including leader:  
trailer:  
3000  
min. 300 mm  
min. 500 mm  
min. 300 mm  
EMBOSSED CARRIER TAPE  
Tape (all dimensions in mm)  
2
Po  
P
W
: 16,00 ± 0,3  
D
o
Po  
Do  
E
F
G(min)  
P2  
P1  
D1(min)  
Ao  
Bo  
:
:
:
:
:
:
:
:
:
:
4,00 ± 0,1  
1,50 +0,1/-0  
1,75 ± 0,1  
7,50 ± 0,1  
0,60  
2,00 ± 0,1  
8,00 ± 0,1  
1,50  
E
F
o
A
1
D
Ct  
W
o
B
G
5,50 ± 0,1  
7,50 ± 0,1  
P1  
Ct  
: 13,5 ± 0,1  
COVER TAPE  
W
2
Reel (all dimensions in mm)  
A
:330  
W1  
: 16,4 +2/-0  
W2(max) : 22,4  
N(min)  
C
: 50  
: 13,0 +0,5/-0,2  
C
A
N
W
1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. Marking  
of the filters can be read if the upper side of the carrier tape is regarded with the sprocket holes on the right.  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 172b.doc  
Version 1.3  
30.04.2004  
VI TELEFILTER  
Filter specification  
TFS 172B  
4/5  
Air reflow temperature conditions  
1st and 2nd air reflow profile  
Name:  
Temperature:  
Time:  
pre-heating periods main-heating periods  
peak temperature  
255 °C ± 5 °C  
150 °C - 170 °C  
60 sec. - 90 sec.  
over 200 °C  
20 sec. - 25 sec.  
Chip-mount air reflow profile  
260  
240  
220  
200  
180  
160  
140  
120  
100  
80  
60  
40  
20  
0
0
20  
40  
60  
80  
100  
120  
140  
160  
180  
200  
220  
240  
time / sec.  
Table for temperature vs. time during the air reflow process  
Tolerance of temperatures: ± 5 °C  
time / sec.  
0
10  
20  
30  
40  
50  
60  
70  
80  
90  
100  
110  
120  
130  
temperature / °C  
time / sec.  
temperature / °C  
23  
34  
46  
60  
80  
103  
121  
134  
143  
150  
154  
156  
158  
159  
140  
150  
160  
170  
180  
190  
195  
200  
205  
210  
215  
220  
230  
240  
160  
161  
164  
170  
180  
205  
230  
255  
230  
205  
180  
165  
140  
120  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 172b.doc  
Version 1.3  
30.04.2004  
VI TELEFILTER  
Filter specification  
TFS 172B  
5/5  
History  
Version  
1.0  
Reason of Changes  
Name  
Date  
- Generation of specification according to customer specification.  
Dr. Sabah  
12.08.2003  
1.1  
- Change of passband, change of pass band ripple  
definition of group delay ripple, add source and load impedance,  
definition of package (construction, pin configuration, tape and reel)  
Roizengaft  
13.01.2004  
1.2  
1.3  
- Generation of filter specification  
- Change remark of filter characteristic  
- Add typical value  
- Change package (construction, pin connection)  
- Add input and output impedance  
- Add temperature coefficient  
Noack  
Noack  
16.04.2004  
30.04.2004  
- Change package (construction, pin configuration)  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  

相关型号:

TFS173A

Filter Specification
VECTRON

TFS174

Filter Specification
VECTRON

TFS1747

VI TELEFILTER
VECTRON

TFS1747_07

VI TELEFILTER
VECTRON

TFS174C

Filter Specification
VECTRON

TFS174D

Filter Specification
VECTRON

TFS175A

Filter Specification
VECTRON

TFS175D

Filter specification
VECTRON

TFS175K

SAW Filter, 1 Function(s), 175MHz,
MICROSEMI

TFS179

Filter Specification
VECTRON

TFS182

Filter specification
VECTRON

TFS183A

Development specification
VECTRON