TFS170N [VECTRON]

Filter specification; 过滤器规格
TFS170N
型号: TFS170N
厂家: Vectron International, Inc    Vectron International, Inc
描述:

Filter specification
过滤器规格

过滤器 LTE
文件: 总5页 (文件大小:164K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Filename: tfs 170n.doc  
Version 1.6  
11.04.2006  
VI TELEFILTER  
Filter specification  
TFS 170N  
1/5  
Measurement condition  
Ambient temperature:  
Input power level:  
Terminating impedance: *  
Input:  
23  
0
°C  
dBm  
780 || -7,9 pF  
760 || -7.9 pF  
Output:  
Characteristics  
Remark:  
The reference level for the relative attenuation a of the TFS 170N is the attenuation at nominal frequency fN. The maximum attenuation in the pass band  
rel  
is defined as the insertion loss a . The nominal frequency fN is fixed at 170,6 MHz without any tolerance or limit. The values of relative attenuation a are  
rel  
e
guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production  
tolerance scheme.  
D a t a  
typ. Value  
Limit  
Insertion loss  
a
e
6,6 dB  
max.  
8
dB  
Nominal frequency  
Passband  
f
-
170,6 MHz  
N
PB  
p-p  
-
f
±
90  
1
kHz  
dB  
N
Amplitude ripple in PB  
Relative attenuation  
0,4 dB  
max.  
a
rel  
kHz  
fN ± 90 kHz ... fN ± 200  
-0,1 dB  
min.  
min.  
-1  
1
dB**  
dB  
dB  
dB  
dB  
dB  
dB  
dB  
dB  
dB  
dB  
fN  
fN  
fN  
fN  
fN  
fN  
fN  
±
±
±
±
±
±
±
0,2 MHz ... fN ±  
0,4 MHz ... fN ±  
0,6 MHz ... fN ±  
0,8 MHz ... fN ±  
1,6 MHz ... fN ±  
0,4 MHz  
0,6 MHz  
0,8 MHz  
1,6 MHz  
MHz  
5,8 MHz  
2
23  
35  
45  
48  
55  
60  
65  
70  
70  
dB  
dB  
dB  
dB  
dB  
dB  
dB  
dB  
dB  
dB  
min. 13  
min. 27  
min. 40  
min. 43  
min. 47  
min. 50  
min. 45  
min. 40  
min. 40  
3
3
MHz ... fN ±  
5,8 MHz ... fN ±  
35  
75  
75 MHz ... fN - 170  
MHz  
MHz  
MHz  
GHz  
fN ± 35 MHz ... fN ±  
fN  
-
fN + 75 MHz ...  
2
Time domain response***  
5
µsec  
17  
35  
80  
83  
84  
dB  
dB  
dB  
dB  
dB  
min. 10  
min. 20  
min. 76  
min. 79  
min. 80  
dB  
dB  
dB  
dB  
dB  
10 µsec  
30 µsec  
35 µsec  
40 µsec  
Group delay variation in PB  
VSWR in PB  
0,25 µs  
max.  
max.  
1
µs  
1,5:1  
2:1  
Input Power Level  
-
max. 20  
dBm  
Temperature coefficient of frequency Tcf ****  
Frequency inversion temperature T0  
Operating temperature range  
-0,05 ppm/K2  
-
-
35  
-
°C  
- 33 °C .. +  
- 40 °C.. +  
85 °C  
125 °C  
Storage temperature range  
-
IIP3 *****  
36  
dBm  
min. 30  
dBm  
*) The terminating impedances depend on parasites and q-values of matching elements and the board used, and are to be understood as reference  
values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.  
**) reference is max. loss in PB  
***) Attenuation values for delays between 5µs and 35µs shall be interpolated linearly.  
****)f(Hz) = TC (ppm/K2) x (T-T0)² x f (MHz)  
f
To  
*****) fin1= 170,5 MHz; fin2= 170,55 MHz; Pin= 0 dBm fmeasurement = 170,6 MHz  
generated:  
checked / approved:  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 170n.doc  
Version 1.6  
11.04.2006  
VI TELEFILTER  
Filter specification  
TFS 170N  
2/5  
Filter characteristic  
0
0
-1  
8.79  
8.04  
7.29  
6.54  
5.79  
5.04  
4.29  
3.54  
2.79  
2.04  
1.29  
-10  
-20  
-30  
-40  
-50  
-60  
-70  
-80  
-90  
-100  
-2  
-3  
-4  
-5  
-6  
-7  
-8  
-9  
-10  
168.6 169 169.4 169.8 170.2 170.6 171 171.4 171.8 172.2 172.6  
frequency in MHz  
170.35170.4 170.45170.5 170.55 170.6 170.65 170.7 170.75 170.8 170.85  
frequency in MHz  
Construction and pin connection  
(All dimensions in mm)  
13,3±0,2  
1
2
Input RF Return  
Ground  
3
Ground  
4
5
Ground  
Output  
TFS 170N  
6
7
8
Output RF Return  
Ground  
Ground  
U15  
9
10  
Ground  
Input  
Date code  
1,0±0,2  
5
1
Date code: Year + week  
U
V
W
...  
2006  
2007  
2008  
1,91±0,2  
10  
7,62±0,2  
6
50 Test circuit  
10  
5
L2  
L1  
C1  
C2  
1, 2, 3, 4, 6, 7, 8, 9  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 170n.doc  
Version 1.6  
11.04.2006  
VI TELEFILTER  
Filter specification  
TFS 170N  
3/5  
Stability characteristics, reliability  
After the following tests the filter shall meet the whole specification:  
1. Shock:  
500g, 1 ms, half sine wave, 3 shocks each plane;  
DIN IEC 68 T2 - 27  
2. Vibration:  
10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans;  
DIN IEC 68 T2 - 6  
3. Change of  
temperature:  
-55 °C to 125°C / 30 min. each / 10 cycles  
DIN IEC 68 part 2 – 14 Test N  
4. Resistance to  
solder heat (reflow):  
reflow possible: three times max.;  
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;  
This filter is RoHS compliant (2002/95/EG, 2005/618/EG)  
Packing  
Tape & Reel:  
IEC 286 – 3, with exception of value for N and minimum bending radius;  
tape type II, embossed carrier tape with top cover tape on the upper side;  
max. pieces of filters per reel:  
reel of empty components at start:  
reel of empty components at start including leader:  
trailer:  
1700  
min. 300 mm  
min. 500 mm  
min. 300 mm  
Pull Off Direction  
P1  
Tape (all dimensions in mm)  
Date Code  
W
: 24,00 +0,30/-0,10  
Po  
P2  
t
Do  
Po  
Do  
E
:
:
:
4,00 ± 0,1  
1,50 +0,1/-0  
1,75 ± 0,10  
F
: 11,50 ± 0,10  
G(min)  
P2  
:
:
0,60  
2,00 ± 0,1  
P1  
: 12,00 ± 0,1  
D1(min)  
Ao  
:
:
1,50  
7,10 ± 0,10  
Ko  
Typ  
PIN Marker  
D1  
Ao  
Bo  
Ct  
: 13,90 ± 0,10  
: 21,5 ± 0,1  
W
2
Reel (all dimensions in mm)  
A
:330  
W1  
: 24,4 +2/-0  
W2(max) : 30,4  
N(min)  
C
: 60  
: 13,0 +0,5/-0,2  
C
A
N
W
1
The minimum bending radius is 45 mm.  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 170n.doc  
Version 1.6  
11.04.2006  
VI TELEFILTER  
Filter specification  
TFS 170N  
4/5  
Air reflow temperature conditions  
Conditions  
Exposure  
Average ramp-up rate (30°C to 217°C)  
> 100°C  
less than 3°C/second  
between 300 and 600 seconds  
> 150°C  
> 217°C  
Peak temperature  
between 240 and 500 seconds  
between 30 and 150 seconds  
max. 260°C  
Time within 5°C of actual peak temperature  
Cool-down rate (Peak to 50°C)  
Time from 30°C to Peak temperature  
between 10 and 30 seconds  
less than 6°C/second  
no greater than 300 seconds  
Chip-mount air reflow profile  
Temperature / °C  
max. 260°C  
217°C  
Time / s  
max. 300 s  
10 ... 30 s  
30 ... 150 s  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 170n.doc  
Version 1.6  
11.04.2006  
VI TELEFILTER  
Filter specification  
TFS 170N  
5/5  
History  
Version  
Reason of Changes  
Name  
Date  
1.0  
1.1  
generation of “Development specification” according to customer requirements  
package tolerances modified  
Pfeiffer  
Steiner  
13.07.2004  
16.08.2004  
1.2  
terminating impedance added (preliminary value)  
typical value and filter characteristic added  
definition for insertion loss changed  
Pfeiffer  
17.09.2004  
limits for relative attenuation corrected  
1.3  
1.4  
terminating impedance fixed  
air reflow temperature conditions modified  
Pfeiffer  
Pfeiffer  
18.10.2004  
04.11.2004  
limit for maximum input power level fixed to 20 dBm  
air reflow temperature conditions modified  
1.5  
1.6  
operating temperature range extended  
Pfeiffer  
Pfeiffer  
31.03.2006  
11.04.2006  
typical values and more details added for IP3  
VSWR typo corrected  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  

相关型号:

TFS170N_06

Filter specification
VECTRON

TFS171

Specification
VECTRON

TFS171A

Filter Specification
VECTRON

TFS172A

Filter specification
VECTRON

TFS172B

Filter specification
VECTRON

TFS173A

Filter Specification
VECTRON

TFS174

Filter Specification
VECTRON

TFS1747

VI TELEFILTER
VECTRON

TFS1747_07

VI TELEFILTER
VECTRON

TFS174C

Filter Specification
VECTRON

TFS174D

Filter Specification
VECTRON

TFS175A

Filter Specification
VECTRON