TFS167H_06 [VECTRON]

Filter specification; 过滤器规格
TFS167H_06
型号: TFS167H_06
厂家: Vectron International, Inc    Vectron International, Inc
描述:

Filter specification
过滤器规格

过滤器
文件: 总5页 (文件大小:273K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Filename: tfs 167h.doc  
Version 1.6  
24.07.2006  
VI TELEFILTER  
Filter specification  
TFS 167H  
1/5  
Measurement condition  
Ambient temperature:  
Input power level:  
Terminating impedance: *  
Input:  
23  
0
°C  
dBm  
348 || -7,2 pF  
348 || -7,2 pF  
Output:  
Characteristics  
Remark:  
The reference level for the relative attenuation a of the TFS 167H is the maximum attenuation in the pass band. The maximum attenuation in the pass  
rel  
band is defined as the insertion loss a . The nominal frequency fN is fixed at 167,0 MHz without any tolerance or limit. The values of relative attenuation  
e
a
are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the  
rel  
production tolerance scheme.  
D a t a  
typ. value  
tolerance / limit  
a
1,4  
dB  
max.  
3,0  
dB  
Insertion loss  
e
(reference level)  
fN  
-
-
167,0  
75  
MHz  
kHz  
Nominal frequency  
Passband  
PB  
f
±
N
p-p  
0,25  
0,3  
dB  
dB  
max.  
max.  
0,5  
1
dB  
dB  
Pass band ripple  
Pass band variation  
Relative attenuation  
a
rel  
fN  
fN  
fN  
fN  
fN  
fN  
0,4  
0,6  
20  
20  
103  
105  
MHz ... fN  
MHz ... fN  
MHz ... fN  
MHz ... fN  
MHz ... fN  
MHz ... fN  
0,6  
20,0  
137  
103  
105  
833  
MHz  
9,0  
18,0  
56  
43  
65  
46  
dB  
dB  
dB  
dB  
dB  
dB  
min.  
min.  
min.  
min.  
min.  
min.  
5
10  
33  
33  
40  
33  
dB  
dB  
dB  
dB  
dB  
dB  
±
±
-
+
+
+
±
±
-
+
+
+
MHz  
MHz  
MHz  
MHz  
MHz  
1,75  
210  
18,0  
19,0  
110  
µs  
ns  
dB  
dB  
dB  
max.  
max.  
min.  
min.  
min.  
max.  
2,0  
300  
15,0  
10,0  
100  
22  
µs  
Absolute group delay within PB  
Group delay ripple within PB  
Input return loss  
ns  
dB  
dB  
dB  
dBm  
Output return loss  
**  
Intermodulation ratio  
Input power level  
OTR  
-
-
- 5 °C ... + 85 °C  
Operating temperature range  
Storage temperature range  
- 40 °C ... + 90 °C  
20  
°C  
Frequency inversion temperature  
TC ***  
-0,046 ppm/K²  
-
Temperature coefficient of frequency  
f
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference  
values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.  
**) fin1= fN + 0,800MHz; fin2= fN + 1,600MHz; Pin=– 20dBm fmeasurement = fN and fin1= fN - 0,800MHz; fin2= fN - 1,600MHz; Pin=– 20dBm fmeasurement = fN  
***) f (Hz) = Tcf(ppm/K²) x (T - To)² x fCAT (MHz).  
c
Generated:  
Checked / Approved:  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 167h.doc  
Version 1.6  
24.07.2006  
VI TELEFILTER  
Filter specification  
TFS 167H  
2/5  
Filter characteristic  
0
0
3.82  
-10  
-
0
.
5
3.58  
-20  
-1  
3.34  
-30  
-
1
.
5
3.1  
-40  
-2  
2.86  
-50  
-
2
.
5
2.62  
-60  
-3  
2.38  
-70  
-
3
.
5
2.14  
-80  
-4  
1.9  
-90  
-
4
.
5
1.66  
-10  
0
-5  
1.42  
5
0
145  
240  
335  
430  
525  
620  
715  
810  
905  
1000  
166.75 166.8 166.85 166.9 166.95 167 167.05 167.1 167.15 167.2 167.25  
f
r
e
quenc  
y
i
n
M
Hz  
frequency in MHz  
Construction and pin connection  
(All dimensions in mm)  
1
2
3
4
5
6
7
8
9
Input  
Ground  
Output  
Ground  
Ground  
Output  
Ground  
Ground  
Ground  
Ground  
TFS 167H  
U30  
10  
Date code: Year + week  
U
V
W
...  
2006  
2007  
2007  
50 Ohm Test circuit  
1
3
6
2, 4, 5, 7, 8, 9, 10  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 167h.doc  
Version 1.6  
24.07.2006  
VI TELEFILTER  
Filter specification  
TFS 167H  
3/5  
Stability characteristics, reliability  
After the following tests the filter shall meet the whole specification:  
1. Shock:  
500g, 1 ms, half sine wave, 3 shocks each plane;  
DIN IEC 68 T2 - 27  
2. Vibration:  
10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans;  
DIN IEC 68 T2 - 6  
3. Change of  
temperature:  
-55 °C to 125°C / 30 min. each / 10 cycles  
DIN IEC 68 part 2 – 14 Test N  
4. Resistance to  
solder heat (reflow):  
reflow possible: three times max.;  
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;  
5. ESD  
MIL-STD-883E using coupling network of ISO 10605 and EN 6100-4-2  
HBM:500V; MM:500V;  
This filter is RoHS compliant (2002/95/EG, 2005/618/EG)  
Packing  
Tape & Reel:  
IEC 286 – 3, with exception of value for N and minimum bending radius;  
tape type II, embossed carrier tape with top cover tape on the upper side;  
max. pieces of filters per reel:  
reel of empty components at start:  
reel of empty components at start including leader:  
trailer:  
2000  
min. 300 mm  
min. 500 mm  
min. 300 mm  
Pull Off Direction  
P1  
Tape (all dimensions in mm)  
Date Code  
W
: 16,00 ± 0,3  
Po  
P2  
t
Do  
Po  
Do  
E
F
G(min)  
P2  
:
:
:
:
:
:
4,00 ± 0,1  
1,50 +0,1/-0  
1,75 ± 0,10  
7,50 ± 0,10  
0,60  
2,00 ± 0,1  
P1  
: 12,00 ± 0,1  
D1(min)  
Ao  
Bo  
:
:
:
1,50 +0,1/-0  
7,60 ± 0,10  
9,60 ± 0,10  
Ko  
Typ  
PIN Marker  
D1  
Ao  
Ct  
: 13,5  
W
2
Reel (all dimensions in mm)  
A
:330  
W1  
: 16,4  
W2(max) : 22,4  
N(min)  
C
: 50  
: 13,0  
C
A
N
W
1
The minimum bending radius is 45 mm.  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 167h.doc  
Version 1.6  
24.07.2006  
VI TELEFILTER  
Filter specification  
TFS 167H  
4/5  
Air reflow temperature conditions  
Conditions  
Exposure  
Average ramp-up rate (30°C to 217°C)  
> 100°C  
less than 3°C/second  
between 300 and 600 seconds  
> 150°C  
> 217°C  
Peak temperature  
between 240 and 500 seconds  
between 30 and 150 seconds  
max. 260°C  
Time within 5°C of actual peak temperature  
Cool-down rate (Peak to 50°C)  
Time from 30°C to Peak temperature  
between 10 and 30 seconds  
less than 6°C/second  
no greater than 300 seconds  
Chip-mount air reflow profile  
Temperature / °C  
max. 260°C  
217°C  
Time / s  
max. 300 s  
10 ... 30 s  
30 ... 150 s  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 167h.doc  
Version 1.6  
24.07.2006  
VI TELEFILTER  
Filter specification  
TFS 167H  
5/5  
History  
Version  
1.0  
Reason of Changes  
Name  
Date  
generate preliminary specification  
Roizengaft  
Noack  
18.11.2003  
1.1  
generation of filter specification  
add terminating impedance  
add filter characteristic  
change circuit test  
change packing (tape and reel)  
16.04.2004  
1.2  
correction terminating impedance  
add typical value for amplitude ripple amplitude variation  
change packing (tape)  
change temperature coefficient  
Noack  
Noack  
18.06.2004  
16.07.2004  
1.3  
1.4  
change limit of relative attenuation from 30 dB to 33dB  
update typical value and filter characteristic  
add ESD stability characteristics  
change drawing of packing (tape and reel)  
Noack  
Martens  
Strehl  
19.08.2004  
1.11.2004  
24.07.2006  
1.5  
1.6  
changed air reflow profile and test circuit layout  
change stability characteristics and packing  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  

相关型号:

TFS168A

Filter specification
VECTRON

TFS170

Specification
VECTRON

TFS170D

Filter specification
VECTRON

TFS170D_06

Filter specification
VECTRON

TFS170F

Filter Specification
VECTRON

TFS170G

Filter specification
VECTRON

TFS170K

Filter Specification
VECTRON

TFS170L

Filter Specificationl
VECTRON

TFS170N

Filter specification
VECTRON

TFS170N_06

Filter specification
VECTRON

TFS171

Specification
VECTRON

TFS171A

Filter Specification
VECTRON