TLP170A [TOSHIBA]

Solid State Relay, TRANSISTOR OUTPUT SOLID STATE RELAY, 1500 V ISOLATION-MAX, 11-5H1, SOP-4;
TLP170A
型号: TLP170A
厂家: TOSHIBA    TOSHIBA
描述:

Solid State Relay, TRANSISTOR OUTPUT SOLID STATE RELAY, 1500 V ISOLATION-MAX, 11-5H1, SOP-4

分离技术 隔离技术 输出元件 光电
文件: 总6页 (文件大小:199K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
TLP170A  
TOSHIBA Photocoupler Photorelay  
TLP170A  
Telecommunications  
Control Equipment  
Unit: mm  
Data Acquisition System  
Security Equipment  
Measurement Equipment  
The Toshiba TLP170A consists of a gallium arsenide infrared emitting  
diode optically coupled to a photo-MOSFET in a 4-pin SOP package.  
This photorelay requires 1mA of LED current to turn it on. It is suitable  
for applications that need electrical power savings.  
4-pin SOP (2.54SOP4): Height = 2.1 mm, pitch = 2.54 mm  
Normally open (1-Form-A) device  
Peak off-state voltage: 60 V (min)  
Trigger LED current: 1 mA (max)  
ON-state current: 400 mA (max)  
ON-state resistance: 2 (max)  
Isolation voltage: 1500 Vrms (min)  
UL recognized: UL1577, File No.E67349  
c-UL recognized  
JEDEC  
JEITA  
TOSHIBA  
Weight: 0.1 g (typ.)  
11-5H1  
CSA Component Acceptance Service No. 5A File No.E67349  
Pin Configuration (top view)  
1
2
4
3
1: Anode  
2: Cathode  
3: Drain  
4: Drain  
Internal Circuit  
1
2
4
3
1
2009-05-15  
TLP170A  
Absolute Maximum Rating (Ta = 25°C)  
Characteristics  
Symbol  
Rating  
Unit  
Forward current  
I
50  
0.5  
5
mA  
mA/°C  
V
F
Forward current derating (Ta 25°C)  
Reverse voltage  
ΔI /°C  
F
V
R
LED  
Pulse forward current  
I
1
A
FP  
(100 μs pulse, 100 pps)  
Junction temperature  
T
125  
60  
°C  
V
j
OFF-state output terminal voltage  
V
I
OFF  
ON  
ON-state current  
Detector  
400  
mA  
mA/°C  
°C  
Forward current derating (Ta 25°C)  
ΔI /°C  
ON  
4.0  
Junction temperature  
Storage temperature  
T
125  
j
T
55 to 125  
40 to 85  
260  
°C  
stg  
opr  
Operating temperature  
T
°C  
Lead soldering temperature (10 s)  
Isolation voltage (AC, 1 min, R.H. 60%) (Note 1)  
T
sol  
°C  
BV  
1500  
Vrms  
S
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the  
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even  
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum  
ratings.  
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook  
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test  
report and estimated failure rate, etc).  
Note 1: LED pins are shorted together. Detector pins are also shorted together.  
Recommended Operating Conditions  
Characteristics  
Supply voltage  
Symbol  
Min  
Typ.  
Max  
Unit  
V
2
48  
25  
V
DD  
Forward current  
I
mA  
mA  
°C  
F
ON-state current  
I
320  
65  
ON  
Operating temperature  
T
opr  
20  
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the  
device. Additionally, each item is an independent guideline respectively. In developing designs using this  
product, please confirm specified characteristics shown in this document.  
Electrical Characteristics (Ta = 25°C)  
Characteristics  
Symbol  
Test Condition  
= 10 mA  
F
Min  
Typ.  
Max  
Unit  
Forward voltage  
Reverse current  
Capacitance  
V
I
1.0  
1.15  
1.3  
10  
V
F
LED  
I
V
= 5 V  
R
μA  
pF  
nA  
pF  
R
C
V = 0, f = 1 MHz  
= 60 V  
30  
T
OFF-state current  
Capacitance  
I
V
1
1000  
OFF  
OFF  
Detector  
C
V = 0, f = 1 MHz  
130  
OFF  
2
2009-05-15  
TLP170A  
Coupled Electrical Characteristics (Ta = 25°C)  
Characteristics  
Trigger LED current  
Symbol  
Test Condition  
= 400 mA  
Min  
Typ.  
Max  
Unit  
I
I
I
I
0.1  
1
1
2
mA  
mA  
Ω
FT  
ON  
Return LED current  
On-state resistance  
I
= 100 μA  
OFF  
FC  
R
= 400 mA, I = 2 mA  
ON  
ON  
F
Isolation Characteristics (Ta = 25°C)  
Characteristics  
Symbol  
Test Condition  
Min  
Typ.  
0.8  
Max  
Unit  
Capacitance input to output  
Isolation resistance  
C
R
V
V
= 0 V, f = 1 MHz  
pF  
S
S
S
S
= 500 V, R.H. 60%  
5 × 1010 1014  
Ω
AC, 1 min  
1500  
Vrms  
Vdc  
Isolation voltage  
BV  
S
AC, 1 s, in oil  
DC, 1 min, in oil  
3000  
3000  
Switching Characteristics (Ta = 25°C)  
Characteristics  
Symbol  
Test Condition  
= 200 Ω  
Min  
Typ.  
3.0  
Max  
8.0  
Unit  
ms  
R
(2)  
(2)  
(2)  
L
Turn-on time  
Turn-on time  
Turn-off time  
t
t
ON  
ON  
V
= 20 V, I = 2 mA  
DD  
F
R
L
= 200 Ω  
5.0  
3.0  
V
= 20 V, I = 5 mA  
DD  
F
R
= 200 Ω  
L
t
1.0  
OFF  
V
= 20 V, I = 2 mA  
F
DD  
Note 2: Switching time test circuit  
I
F
V
DD  
1
2
4
3
R
L
I
F
V
OUT  
V
OUT  
90%  
10%  
t
ON  
t
OFF  
3
2009-05-15  
TLP170A  
I
Ta  
I
Ta  
ON  
F
60  
50  
40  
30  
20  
10  
0
500  
400  
300  
200  
100  
0
-40  
-20  
0
20  
40  
60  
80  
100  
-40  
-20  
0
20  
40  
60  
80  
100  
Ambient temperature Ta (°C)  
Ambient temperature Ta (°C)  
I
V  
I
V  
ON ON  
F
F
100  
10  
1
500  
400  
300  
200  
100  
0
Ta = 25℃  
Ta = 25℃  
IF = 2mA  
-100  
-200  
-300  
-400  
-500  
0.1  
0.8  
0.9  
1.0  
1.1  
1.2  
F
1.3  
1.4  
-0.4  
-0.2  
0
0.2  
(V)  
0.4  
Forward voltage  
V
(V)  
On-sate voltage  
V
ON  
R
ON  
Ta  
I
Ta  
FT  
1.2  
1.0  
0.8  
0.6  
0.4  
0.2  
0.8  
0.7  
0.6  
0.5  
0.4  
0.3  
0.2  
0.1  
I
= 400mA  
ON  
t < 1s  
I
= 400mA  
ON  
I = 2mA  
F
t < 1s  
0
0
-40  
-20  
0
20  
40  
60  
80  
100  
-40  
-20  
0
20  
40  
60  
80  
100  
Ambient temperature Ta (°C)  
Ambient temperature Ta (°C)  
4
2009-05-15  
TLP170A  
t
, t  
I  
t
, t  
ON OFF  
Ta  
ON OFF  
F
100  
10  
10  
VDD = 20V  
RL = 200ꢀ  
Ta=25°C  
tON  
tOFF  
1
1
tOFF  
0.1  
0.01  
VDD = 20V  
RL = 200ꢀ  
IF = 2 mA  
tON  
0.1  
-40  
-20  
0
20  
40  
60  
80  
100  
0.1  
1
10  
(mA)  
100  
Forward current  
I
Ambient temperature Ta (°C)  
F
I
Ta  
OFF  
100  
VOFF = 60V  
10  
1
0.1  
0.01  
0.001  
-40 -20  
0
20  
40  
60  
80  
100  
Ambient temperature Ta (°C)  
5
2009-05-15  
TLP170A  
RESTRICTIONS ON PRODUCT USE  
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information  
in this document, and related hardware, software and systems (collectively “Product”) without notice.  
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with  
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.  
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are  
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and  
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily  
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must  
also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,  
the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA  
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are  
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the  
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any  
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other  
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO  
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.  
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring  
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.  
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or  
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious  
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used  
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling  
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric  
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this  
document.  
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.  
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any  
applicable laws or regulations.  
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any  
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to  
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.  
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE  
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY  
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR  
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND  
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO  
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS  
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.  
GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or  
vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product.  
Do not use or otherwise make available Product or related software or technology for any military purposes, including without  
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile  
technology products (mass destruction weapons). Product and related software and technology may be controlled under the  
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product  
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.  
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.  
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,  
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of  
noncompliance with applicable laws and regulations.  
6
2009-05-15  

相关型号:

TLP170A(F)

Relay SSR 50mA 1.3V DC-IN 0.4A 60V 4-Pin SOP
TOSHIBA

TLP170A(V4)

Solid State Relay
TOSHIBA

TLP170AM(E

Solid State Relay
TOSHIBA

TLP170AM(V4TPL,E

Solid State Relay
TOSHIBA

TLP170D

Solid State Relay, TRANSISTOR OUTPUT SOLID STATE RELAY, 1500 V ISOLATION-MAX, 11-5H1, SOP-4
TOSHIBA

TLP170D(F)

Relay SSR 50mA 1.3V DC-IN 0.2A 200V 4-Pin SOP
TOSHIBA

TLP170D(TP,F)

IC PHOTORELAY MOSFET 4-SOP
TOSHIBA

TLP170D(V4)

Solid State Relay
TOSHIBA

TLP170G

Solid State Relay, TRANSISTOR OUTPUT SOLID STATE RELAY, 1500 V ISOLATION-MAX, 11-5H1, SOP-4
TOSHIBA

TLP170G(F)

Relay SSR 50mA 1.3V DC-IN 0.1A 350V 4-Pin SOP
TOSHIBA

TLP170G(TP,F)

IC PHOTORELAY MOSFET 4-SOP
TOSHIBA

TLP170G(V4)

Transistor Output SSR
TOSHIBA