TLP170G(F) [TOSHIBA]
Relay SSR 50mA 1.3V DC-IN 0.1A 350V 4-Pin SOP;型号: | TLP170G(F) |
厂家: | TOSHIBA |
描述: | Relay SSR 50mA 1.3V DC-IN 0.1A 350V 4-Pin SOP |
文件: | 总6页 (文件大小:322K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TLP170G
TOSHIBA Photocoupler Photorelay
TLP170G
Modem·Fax Cards, Modems in PC
Telecommunications
PBX
Unit: mm
Security Equipment
Measurement Equipment
The Toshiba TLP170G consists of a gallium arsenide infrared emitting
diode optically coupled to a photo-MOSFET in a 4-pin SOP package.
This photorelay requires 1mA of LED current to turn it on. It is suitable
for applications that need electrical power savings.
•
•
•
•
•
•
•
•
•
•
4-pin SOP (2.54SOP4): Height = 2.1 mm, Pitch = 2.54 mm
1-Form-A
Peak OFF-state voltage: 350 V (min)
Trigger LED current: 1 mA (max)
ON-state current: 100 mA (max)
ON-state resistance: 35 Ω (max t < 1 s)
ON-state resistance: 50 Ω (max continuous)
Isolation voltage: 1500 Vrms (min)
UL recognized: UL1577, File No.E67349
cUL recognized: CSA Component Acceptance Service No. 5A
File No.E67349
JEDEC
―
―
JEITA
TOSHIBA
Weight: 0.1 g (typ.)
11-5H1
•
Option (V4) VDE approved: EN60747-5-5
(Note1)
(Note 1) When a VDE approved type is needed,
please designate the “Option(V4)”
Pin Configuration (top view)
1
2
4
3
1: Anode
2: Cathode
3: Drain
4: Drain
Internal Circuit
1
2
4
3
Start of commercial production
2009-06
1
2018-01-11
TLP170G
Absolute Maximum Rating (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Forward current
I
50
−0.5
1
mA
mA/°C
A
F
Forward current derating (Ta ≥ 25°C)
Pulse forward current (100 μs pulse, 100 pps)
∆I /°C
F
I
FP
LED
Reverse voltage
V
P
5
V
R
D
50
mW
Diode power dissipation
△P /°C
-0.5
mW/ °C
Diode power dissipation derating (Ta ≥25°C)
Junction temperature
D
T
j
125
350
°C
V
OFF-state output terminal voltage
ON-state current
V
OFF
I
ON
100
mA
ON-state current derating (Ta ≥ 25°C)
Output power dissipation
∆I /°C
ON
−1.0
mA/°C
mW
mW / °C
°C
Detector
P
300
C
Output power dissipation derating (Ta ≥ 25°C)
Junction temperature
ΔP / °C
−3.0
C
T
j
125
Storage temperature range
T
−55 to 125
−40 to 85
260
°C
stg
opr
Operating temperature range
T
°C
Lead soldering temperature (10 s)
Isolation voltage (AC, 1 minute, R.H. ≤ 60%) (Note 1)
T
°C
sol
BV
1500
Vrms
S
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if
the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: Device considered a two-terminal device: LED side pins shorted together, and detector side pins shorted
together.
Recommended Operating Conditions
Characteristics
Supply voltage
Symbol
Min
Typ.
Max
Unit
V
―
―
―
2
280
25
V
DD
Forward current
I
mA
mA
°C
F
On-state current
I
―
―
―
80
ON
Operating temperature
T
opr
−20
65
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
Electrical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
= 10 mA
F
Min
Typ.
Max
Unit
Forward voltage
Reverse current
Capacitance
V
I
1.0
1.15
1.3
10
V
F
LED
I
V
= 5 V
R
μA
pF
nA
pF
R
C
T
V = 0 V, f = 1 MHz
= 350 V
30
1
Off-state current
Capacitance
I
V
1000
OFF
OFF
Detector
C
OFF
V = 0 V, f = 1 MHz
35
2
2018-01-11
TLP170G
Coupled Electrical Characteristics (Ta = 25°C)
Characteristics
Trigger LED current
Symbol
Test Condition
= 100 mA
Min
Typ.
Max
Unit
I
I
I
I
I
0.1
0.4
1
mA
mA
FT
ON
Return LED current
I
= 100 μA
35
50
FC
OFF
= 100 mA, I = 2 mA, t < 1 s
25
35
ON
ON
F
On-state resistance
R
ON
Ω
= 100 mA, I = 2 mA, continuous
F
Isolation Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Min
Typ.
0.8
Max
Unit
Capacitance input to output
Isolation resistance
C
R
V
V
= 0 V, f = 1 MHz
pF
S
S
S
10
14
= 500 V, R.H. ≤ 60%
5 × 10
10
Ω
S
AC, 1 minute
1500
Vrms
Vdc
Isolation voltage
BV
AC, 1 second, in oil
DC, 1 minute, in oil
3000
3000
S
Switching Characteristics (Ta = 25°C)
Characteristics
Turn-on time
Symbol
Test Condition
Min
Typ.
1.0
Max
5.0
3.0
3.0
Unit
ms
R
= 200 Ω
L
t
t
ON
ON
V
= 20 V, I = 2 mA
(Note 2)
(Note 2)
(Note 2)
DD
F
R
L
= 200 Ω
Turn-on time
Turn-off time
V
= 20 V, I = 5 mA
DD
F
R
L
= 200 Ω
t
1.0
OFF
V
= 20 V, I = 2 mA
DD
F
Note 2: Switching time test circuit
I
F
V
DD
1
2
4
3
R
L
I
F
V
OUT
V
OUT
90%
10%
ON
t
t
OFF
3
2018-01-11
TLP170G
I
─ Ta
I
─ Ta
ON
F
60
50
40
30
20
10
0
120
100
80
60
40
20
0
-40
-20
0
20
40
60
80
100
-40
-20
0
20
40
60
80
100
Ambient temperature Ta (°C)
Ambient temperature Ta (°C)
I
─ V
I
─ V
ON ON
F
F
100
10
1
150
100
50
Ta = 25℃
Ta = 25℃
IF = 2mA
0
-50
-100
-150
0.1
0.8
0.9
1.0
1.1
1.2
F
1.3
1.4
-3
-2
-1
0
1
2
3
Forward voltage
V
(V)
ON-sate voltage
V
(V)
ON
R
ON
─ Ta
I
─ Ta
FT
40
30
20
10
0
0.7
0.6
0.5
0.4
0.3
0.2
0.1
I
= 100mA
ON
t < 1s
I
= 100mA
ON
I = 2mA
F
t < 1s
0
-40
-20
0
20
40
60
80
100
-40
-20
0
20
40
60
80
100
Ambient temperature Ta (°C)
Ambient temperature Ta (°C)
4
2018-01-11
TLP170G
t
,t
ON OFF
─ I
t
,t
─ Ta
F
ON OFF
10
1
10
VDD = 20V
RL = 200Ω
IF = 2 mA
tOFF
tON
1
tON
0.1
0.01
tOFF
V
= 20V
DD
R
= 200Ω
L
Ta=25°C
0.1
-40
-20
0
20
40
60
80
100
0.1
1
10
(mA)
100
Forward current
I
Ambient temperature Ta (°C)
F
I
─ Ta
OFF
100
V
= 350V
OFF
10
1
0.1
0.01
0.001
-40 -20
0
20
40
60
80
100
Ambient temperature Ta (°C)
5
2018-01-11
TLP170G
RESTRICTIONS ON PRODUCT USE
Toshiba Corporation and its subsidiaries and affiliates are collectively referred to as “TOSHIBA”.
Hardware, software and systems described in this document are collectively referred to as “Product”.
•
•
TOSHIBA reserves the right to make changes to the information in this document and related Product without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
•
Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product,
or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all
relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for
Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for
the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product
design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or
applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams,
programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for
such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
•
PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH
MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without
limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for
automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions,
safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE
PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your
TOSHIBA sales representative.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or vapor.
Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,
for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology
products (mass destruction weapons). Product and related software and technology may be controlled under the applicable export
laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export
Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in
compliance with all applicable export laws and regulations.
•
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES
OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
6
2018-01-11
相关型号:
TLP170J
Solid State Relay, TRANSISTOR OUTPUT SOLID STATE RELAY, 1500 V ISOLATION-MAX, 11-5H1, SOP-4
TOSHIBA
©2020 ICPDF网 联系我们和版权申明