TLP170J(V4) [TOSHIBA]
Solid State Relay;
| 型号： | TLP170J(V4) |
| 厂家： | 
TOSHIBA |
| 描述： | Solid State Relay |
| 文件： | 总6页 (文件大小：312K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TLP170J
TOSHIBA Photocoupler Photorelay
TLP170J
Modem·Fax Cards, Modems in PC
Telecommunications
PBX
Unit: mm
Security Equipment
Measurement Equipment
The Toshiba TLP170J consists of an infrared emitting diode optically
coupled to a photo-MOSFET in a 4-pin SOP package.
This photorelay requires 1 mA of LED current to turn it on. It is suitable
for applications that need electrical power savings.
•
•
•
•
•
•
•
•
•
•
4-pin SOP (2.54SOP4): Height = 2.1 mm, Pitch = 2.54 mm
1-Form-A
Peak OFF-state voltage: 600 V (min)
Trigger LED current: 1 mA (max)
ON-state current: 90 mA (max)
ON-state resistance: 40 Ω (max, t < 1 s)
ON-state resistance: 60 Ω (max, continuous)
Isolation voltage: 1500 Vrms (min)
UL-recognized: UL 1577, File No.E67349
cUL-recognized: CSA Component Acceptance Service No.5A
File No.E67349
JEDEC
―
JEITA
―
TOSHIBA
Weight: 0.1 g (typ.)
11-5H1
•
VDE-approved: EN 60747-5-5 (Note 1)
Note 1: When a VDE approved type is needed,
please designate the Option(V4).
Pin Configuration (top view)
1
2
4
3
1: Anode
2: Cathode
3: Drain
4: Drain
Internal Circuit
1
2
4
3
Start of commercial production
2009-06
© 2019
1
2019-06-17
Toshiba Electronic Devices & Storage Corporation
TLP170J
Absolute Maximum Rating (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Forward current
I
50
−0.5
1
mA
mA/°C
A
F
Forward current derating (Ta ≥ 25°C)
Pulse forward current (100 μs pulse, 100 pps)
∆I /°C
F
I
FP
LED
Reverse voltage
V
P
5
V
R
D
50
mW
mW/°C
°C
Diode power dissipation
△P /°C
-0.5
125
600
90
Diode power dissipation derating (Ta ≥ 25°C)
Junction temperature
D
T
j
OFF-state output terminal voltage
ON-state current
V
OFF
I
ON
V
mA
ON-state current derating (Ta ≥ 25°C)
Output power dissipation
∆I /°C
−0.9
300
mA/°C
mW
ON
Detector
P
O
Output power dissipation derating (Ta ≥ 25°C)
Junction temperature
ΔP / °C
−3.0
mW / °C
°C
O
T
125
j
Storage temperature range
T
−55 to 125
−40 to 85
260
°C
stg
opr
Operating temperature range
T
°C
Lead soldering temperature (10 s)
Isolation voltage (AC, 60 s, R.H. ≤ 60 %) (Note 1)
T
°C
sol
BV
1500
Vrms
S
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: Device considered a two-terminal device: LED side pins shorted together, and detector side pins shorted
together.
Recommended Operating Conditions
Characteristics
Supply voltage
Symbol
Min
Typ.
Max
Unit
V
―
―
―
2
480
25
V
DD
Forward current
I
mA
mA
°C
F
ON-state current
I
―
―
―
70
ON
Operating temperature
T
−20
65
opr
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
Electrical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
= 10 mA
F
Min
Typ.
Max
Unit
Forward voltage
Reverse current
Capacitance
V
I
1.0
1.15
1.3
10
V
F
T
LED
I
V
= 5 V
R
μA
pF
nA
pF
R
C
VF = 0 V, f = 1 MHz
= 600 V
30
1
OFF-state current
Capacitance
I
V
1000
OFF
OFF
Detector
C
OFF
V = 0 V, f = 1 MHz
75
© 2019
Toshiba Electronic Devices & Storage Corporation
2
2019-06-17
TLP170J
Coupled Electrical Characteristics (Ta = 25°C)
Characteristics
Trigger LED current
Symbol
Test Condition
= 90 mA
Min
Typ.
Max
Unit
I
I
I
I
I
0.1
0.4
1
mA
mA
FT
ON
Return LED current
I
= 100 μA
40
60
FC
OFF
= 90 mA, I = 2 mA, t < 1 s
ON
ON
F
ON-state resistance
R
ON
Ω
= 90 mA, I = 2 mA, continuous
45
F
Isolation Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Min
Typ.
0.8
Max
Unit
Capacitance input to output
Isolation resistance
C
R
V
V
= 0 V, f = 1 MHz
pF
S
S
S
10
14
= 500 V, R.H. ≤ 60 %
5 × 10
10
Ω
S
Isolation voltage
BV
AC, 60 s
1500
Vrms
S
Switching Characteristics (Ta = 25°C)
Characteristics
Turn-on time
Symbol
Test Condition
Min
Typ.
2.0
Max
8.0
5.0
3.0
Unit
ms
R
= 200 Ω
L
t
t
ON
ON
V
= 10 V, I = 2 mA
(Note 2)
(Note 2)
(Note 2)
DD
F
R
L
= 200 Ω
Turn-on time
Turn-off time
V
= 10 V, I = 5 mA
DD
F
R
L
= 200 Ω
t
0.5
OFF
V
= 10 V, I = 2 mA
DD
F
Note 2: Switching time test circuit
I
F
V
DD
1
2
4
3
R
L
I
F
V
OUT
V
OUT
90%
10%
t
ON
t
OFF
© 2019
Toshiba Electronic Devices & Storage Corporation
3
2019-06-17
TLP170J
I
─ Ta
I
─ Ta
ON
F
60
50
40
30
20
10
0
100
90
80
70
60
50
40
30
20
10
0
-40
-20
0
20
40
60
80
100
-40
-20
0
20
40
60
80
100
Ambient temperature Ta (°C)
Ambient temperature Ta (°C)
I
─ V
I ─ V
ON ON
F
F
100
10
1
100
Ta = 25℃
Ta = 25℃
IF = 2mA
80
60
40
20
0
-20
-40
-60
-80
-100
0.1
0.8
0.9
1.0
1.1
1.2
F
1.3
1.4
-4
-3
-2
-1
0
1
2
3
4
Forward voltage
V
(V)
ON-sate voltage
V
(V)
ON
R
ON
─ Ta
I
─ Ta
FT
50
40
30
20
10
0
0.7
0.6
0.5
0.4
0.3
0.2
0.1
I
= 90mA
ON
t < 1s
I
= 90mA
ON
I = 2mA
F
t < 1s
0
-40
-20
0
20
40
60
80
100
-40
-20
0
20
40
60
80
100
Ambient temperature Ta (°C)
Ambient temperature Ta (°C)
NOTE: The above characteristics curves are presented for reference only and not guaranteed by production test,
unless otherwise noted.
© 2019
Toshiba Electronic Devices & Storage Corporation
4
2019-06-17
TLP170J
t
,t
─ I
t
,t
─ Ta
ON OFF
F
ON OFF
10
1
10
V
DD = 10V
RL = 200Ω
IF = 2 mA
tON
tOFF
1
tON
tOFF
0.1
0.01
VDD = 10V
RL = 200Ω
Ta=25°C
0.1
-40
-20
0
20
40
60
80
100
0.1
1
10
(mA)
100
Forward current
I
Ambient temperature Ta (°C)
F
I
─ Ta
OFF
100
VOFF = 600V
10
1
0.1
0.01
0.001
-40 -20
0
20
40
60
80
100
Ambient temperature Ta (°C)
NOTE: The above characteristics curves are presented for reference only and not guaranteed by production test,
unless otherwise noted.
© 2019
Toshiba Electronic Devices & Storage Corporation
5
2019-06-17
TLP170J
RESTRICTIONS ON PRODUCT USE
Toshiba Corporation and its subsidiaries and affiliates are collectively referred to as “TOSHIBA”.
Hardware, software and systems described in this document are collectively referred to as “Product”.
• TOSHIBA reserves the right to make changes to the information in this document and related Product without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR
APPLICATIONS.
•
PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH
MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without
limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, lifesaving and/or life supporting medical
equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to
control combustions or explosions, safety devices, elevators and escalators, and devices related to power plant. IF YOU USE
PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your
TOSHIBA sales representative or contact us via our website.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
•
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or
vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the
U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited
except in compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of
Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled
substances, including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES
OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
https://toshiba.semicon-storage.com/
© 2019
6
2019-06-17
Toshiba Electronic Devices & Storage Corporation
相关型号：
©2020 ICPDF网 联系我们和版权申明