TLP170D [TOSHIBA]
Solid State Relay, TRANSISTOR OUTPUT SOLID STATE RELAY, 1500 V ISOLATION-MAX, 11-5H1, SOP-4;
| 型号： | TLP170D |
| 厂家： | 
TOSHIBA |
| 描述： | Solid State Relay, TRANSISTOR OUTPUT SOLID STATE RELAY, 1500 V ISOLATION-MAX, 11-5H1, SOP-4 分离技术 隔离技术 输出元件 光电 |
| 文件： | 总6页 (文件大小：198K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TLP170D
TOSHIBA Photocoupler GaAs IRED & Photo-MOSFET
TLP170D
PBX
Unit: mm
Modem ⋅ Fax Card
Telecommunication
Security Equipment
Measurement Equipment
The Toshiba TLP170D consists of a gallium arsenide infrared emitting
diode optically coupled to a photo-MOSFET in a 4-pin SOP package.
This photorelay requires 1mA of LED current to turn it on. It is suitable
for applications that need electrical power savings.
•
•
•
•
•
•
•
•
SOP 4 pin (2.54SOP4): 1-Form-A
Peak off-state voltage: 200 V (min)
Trigger LED current: 1 mA (max)
ON-state current: 200 mA (max)
ON-state resistance: 8 Ω (max)
Isolation voltage: 1500 Vrms (min)
UL recognized: UL1577, file No. E67349
c-UL recognized
JEDEC
⎯
⎯
JEITA
CSA Component Acceptance Service No. 5A File No.E67349
TOSHIBA
Weight: 0.1 g (typ.)
11-5H1
Pin Configuration (top view)
1
2
4
3
1: Anode
2: Cathode
3: Drain
4: Drain
Internal Circuit
1
4
3
2
1
2009-05-15
TLP170D
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Forward current
Symbol
Rating
50
Unit
mA
I
F
Forward current derating
(Ta ≥ 25°C)
ΔI /°C
F
−0.5
mA/°C
LED
Pulse forward current
(100 μs pulse, 100 pps)
I
1
A
FP
Reverse voltage
V
5
V
°C
V
R
Junction temperature
Off-state output terminal voltage
On-state current
T
125
200
200
j
V
OFF
I
mA
ON
Detector
On-state RMS current derating
(Ta ≥ 25°C)
ΔI /°C
ON
−2.0
mA/°C
Junction temperature
T
125
−55 to 125
−40 to 85
260
°C
°C
j
Storage temperature range
T
stg
opr
Operating temperature range
T
°C
Lead soldering temperature (10 s)
Isolation voltage (AC, 1 min., R.H. ≤ 60%) (Note)
T
sol
°C
BV
1500
Vrms
S
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if
the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note: Device considered a two-terminal device: pins1 and 2 shorted together and pins 3 and 4 shorted together.
Recommended Operating Conditions
Characteristics
Supply voltage
Symbol
Min
Typ.
Max
Unit
V
⎯
⎯
⎯
2
160
25
V
DD
Forward current
I
mA
mA
°C
F
ON-state current
I
⎯
⎯
⎯
160
65
ON
Operating temperature
T
opr
−20
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
Individual Electrical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Min
Typ.
Max
Unit
Forward voltage
Reverse current
Capacitance
V
I
= 10 mA
F
1.0
⎯
⎯
⎯
⎯
1.15
⎯
1.3
10
V
F
LED
I
V
= 5 V
R
μA
pF
nA
pF
R
C
V = 0, f = 1 MHz
= 200 V
30
1
⎯
T
OFF-state current
Capacitance
I
V
1000
⎯
OFF
OFF
Detector
C
V = 0, f = 1 MHz
90
OFF
2
2009-05-15
TLP170D
Coupled Electrical Characteristics (Ta = 25°C)
Characteristics
Trigger LED current
Symbol
Test Condition
= 200 mA
Min
Typ.
Max
Unit
I
I
I
I
⎯
0.1
⎯
0.4
⎯
5
1
⎯
8
mA
mA
Ω
FT
ON
Return LED current
On-state resistance
I
= 100 μA
OFF
FC
R
ON
= 200 mA, I = 2 mA
ON
F
Isolation Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Min
Typ.
Max
Unit
Capacitance input to output
Isolation resistance
C
R
V
V
= 0, f = 1 MHz
⎯
5 × 1010
1500
⎯
0.8
1014
⎯
⎯
⎯
⎯
⎯
⎯
pF
S
S
S
S
= 500 V, R.H. ≤ 60%
Ω
AC, 1 minute
Vrms
Vdc
Isolation voltage
BV
S
AC, 1 second, in oil
DC, 1 minute, in oil
3000
3000
⎯
Switching Characteristics (Ta = 25°C)
Characteristics
Turn-on time
Symbol
Test Condition
Min
⎯
Typ.
3.0
⎯
Max
8.0
5.0
3.0
Unit
ms
ms
ms
R
= 200 Ω
(Note2)
(Note2)
(Note2)
L
t
t
ON
ON
V
= 20 V, I = 2 mA
DD
F
R
L
= 200 Ω
Turn-on time
Turn-off time
⎯
V
= 20 V, I = 5 mA
DD
F
R
L
= 200 Ω
t
⎯
0.6
OFF
V
= 20 V, I = 2 mA
F
DD
Note2: Switching time test circuit
I
V
V
F
DD
I
F
1
2
4
3
R
L
OUT
90%
V
OUT
10%
t
t
OFF
ON
3
2009-05-15
TLP170D
I
─ Ta
I
─ Ta
ON
F
60
50
40
30
20
10
0
250
200
150
100
50
0
-40
-20
0
20
40
60
80
100
-40
-20
0
20
40
60
80
100
Ambient temperature Ta (°C)
Ambient temperature Ta (°C)
I
─ V
I
─ V
ON ON
F
F
100
10
1
250
Ta = 25℃
Ta = 25℃
200
150
100
50
IF = 2mA
0
-50
-100
-150
-200
-250
0.1
0.8
0.9
1.0
1.1
1.2
F
1.3
1.4
-1.0
-0.5
0.5
(V)
1.0
0
Forward voltage
V
(V)
On-sate voltage
V
ON
R
ON
─ Ta
I
─ Ta
FT
7
6
5
4
3
2
1
0
0.7
0.6
0.5
0.4
0.3
0.2
0.1
ION = 200mA
t < 1s
I
= 200mA
ON
I = 2mA
F
t < 1s
0
-40
-20
0
20
40
60
80
100
-40
-20
0
20
40
60
80
100
Ambient temperature Ta (°C)
Ambient temperature Ta (°C)
4
2009-05-15
TLP170D
t
,t
─ I
t
,t
ON OFF
─ Ta
ON OFF
F
10
1
10
tON
tOFF
1
tOFF
VDD = 20V
RL = 200ꢀ
Ta=25°C
0.1
0.01
tON
VDD = 20V
RL = 200ꢀ
IF = 2 mA
0.1
-40
-20
0
20
40
60
80
100
0.1
1
10
(mA)
100
Forward current
I
Ambient temperature Ta (°C)
F
I
─ Ta
OFF
100
VOFF = 200V
10
1
0.1
0.01
0.001
-40 -20
0
20
40
60
80
100
Ambient temperature Ta (°C)
5
2009-05-15
TLP170D
RESTRICTIONS ON PRODUCT USE
•
•
•
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must also
refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the
specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
•
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public
impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the
aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or vapor.
Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,
for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology
products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign
Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software
or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
•
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
6
2009-05-15
©2020 ICPDF网 联系我们和版权申明