TLP166J(V4-TPL,F) [TOSHIBA]

TRIAC-OUTPUT OPTOCOUPLER,1-CHANNEL,2.5KV ISOLATION,SO;


型号：	TLP166J(V4-TPL,F)
厂家：	TOSHIBA
描述：	TRIAC-OUTPUT OPTOCOUPLER,1-CHANNEL,2.5KV ISOLATION,SO 三端双向交流开关分离技术隔离技术输出元件光电
文件：	总4页 (文件大小：143K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

TLP166J

TOSHIBA Photocoupler GaAs Ired + Photo−Triac

TLP166J

Triac Drivers

Unit: mm

Programmable Controllers

AC−Output Modules

Solid State Relays

The TOSHIBA mini-flat coupler TLP166J is a small-outline coupler,

suitable for surface-mount assembly.

The TLP166J consists of a gallium arsenide infrared emitting diode

optically coupled to a triac-output photocoupler.

•

Peak off-state voltage: 600 V (min)

Trigger LED current: 10 mA (max)

On−state current: 70 mA (max)

Isolation voltage: 2500 Vrms (min)

UL-approved: UL1577, file no. E67349

Option(V4) type

VDE approved: EN 60747-5-2 satisfied

Maximum operating insulation voltage: 565 Vpk

TOSHIBA

11−4C3

Weight: 0.09 g (typ.)

Maximum permissible overvoltage:

4000 Vpk

(Note): Please designate “Option (V4)”,when an EN60747-5-2 approved type is needed.

Please note that this product doesn't have 0.4mm insulator thickness when you apply for the safety

standard.

Trigger LED Current

Pin Configurations

Trigger LED Current (mA)

Type

(Note 1)

Marking Of

Classification

= 3 V, Ta = 25°C

Max

Min

(IFT7)

None

―

T7, blank

―

e.g., IFT7: TLP166J(IFT7)

1. Anode

(Note 1): When applying for safety standard certification, use the standard

part number. For example, TLP166J(IFT7): TLP166J

3. Cathode

4. Terminal

6. Terminal

2010-10-01

TLP166J

Absolute Maximum Ratings (Ta = 25°C)

Characteristic

Symbol

Rating

Unit

Forward current

−0.7

Forward current derating (Ta ≥ 53°C)

Peak forward current (100μs pulse, 100pps)

Reverse voltage

ΔI / °C

mA / °C

Junction temperature

125

600

°C

Off−state output terminal voltage

DRM

Ta=25°C

On−state RMS Current

Ta=70°C

T(RMS)

On−state current derating(Ta ≥ 25°C)

ΔI / °C

−0.67

mA / °C

Peak on−state current (100μs pulse, 120pps)

Peak nonrepetitive surge current

(PW=10ms)

1.2

TSM

Junction temperature

Storage temperature range

Operating temperature range

Lead soldering temperature (10s)

115

−55 to 125

−40 to 100

260

°C

stg

opr

°C

sol

Isolation voltage (AC, 1min., R.H.≤ 60%)

(Note 2)

2500

Vrms

Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the

significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even

if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum

ratings.

Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook

(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test

report and estimated failure rate, etc).

(Note 2): Device considered a two−terminal device: Pins 1 and 3 shorted together and Pin 4 and 6 shorted together.

Recommended Operating Conditions

Characteristic

Symbol

Min

Typ.

Max

Unit

Supply voltage

Forward current

―

240

Vac

Peak on−state current

―

Operating temperature

opr

−25

°C

Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the

device. Additionally, each item is an independent guideline respectively. In developing designs using this

product, please confirm specified characteristics shown in this document.

2010-10-01

TLP166J

Electrical Characteristics (Ta = 25°C)

Characteristic

Forward voltage

Symbol

Test Condition

= 10 mA

Min

Typ.

Max

Unit

1.0

―

1.15

―

1.3

μA

Reverse current

V = 5 V

Capacitance

V = 0, f = 1 MHz

= 600 V

―

Peak off−state current

Peak on−state voltage

Holding current

1000

2.8

―

DRM

= 70 mA

1.7

0.6

―

Critical rate of rise

of off−state voltage

V = 240 Vrms, Ta = 85°C

dv / dt

200

500

0.2

―

V / μs

(Note 3)

Critical rate of rise

of commutating voltage

= 15 mA, V = 60 Vrms

dv / dt(c)

―

Coupled Electrical Characteristics (Ta = 25°C)

Characteristic

Trigger LED current

Symbol

Test Condition

Min

Typ.

Max

Unit

V =3 V

―

Inhibit voltage

= rated I

Leakage in inhibited state

―

600

μA

= rated V

DRM

Capacitance input to output

Isolation resistance

= 0, f = 1 MHz

0.8

―

= 500 V, R.H.≤ 60%

1×10

AC, 1 minute

2500

―

Vrms

Vdc

Isolation voltage

AC, 1 second, in oil

DC, 1 minute, in oil

5000

―

(Note 3): dv / dt Test circuit

5 V, V

120 Ω

0 V

dv / dt (c)

dv / dt

4 kΩ

2010-10-01

TLP166J

RESTRICTIONS ON PRODUCT USE

•

Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information

in this document, and related hardware, software and systems (collectively “Product”) without notice.

This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with

TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.

Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are

responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and

systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily

injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the

Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of

all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes

for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the

instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their

own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such

design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,

diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating

parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR

APPLICATIONS.

•

Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring

equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.

Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or

reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious

public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used

in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling

equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric

power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this

document.

•

Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.

Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any

applicable laws or regulations.

•

The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any

infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to

any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.

ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE

FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY

WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR

LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND

LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO

SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.

•

GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or

vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product.

Do not use or otherwise make available Product or related software or technology for any military purposes, including without

limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile

technology products (mass destruction weapons). Product and related software and technology may be controlled under the

Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product

or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.

•

Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.

Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,

including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of

noncompliance with applicable laws and regulations.

2010-10-01

TLP166J(V4-TPL,F) [TOSHIBA]

相关型号：

TLP166J(V4-TPR,F)

TLP168J

TLP168J(TPL)

TLP168J(TPL,F)

TLP168J_07

TLP170A

TLP170A(F)

TLP170A(V4)

TLP170AM(E

TLP170AM(V4TPL,E

TLP170D

TLP170D(F)