2SK365-BL [TOSHIBA]
TRANSISTOR N-CHANNEL, Si, SMALL SIGNAL, JFET, 2-4E1C, 3 PIN, FET General Purpose Small Signal;
| 型号： | 2SK365-BL |
| 厂家： | 
TOSHIBA |
| 描述： | TRANSISTOR N-CHANNEL, Si, SMALL SIGNAL, JFET, 2-4E1C, 3 PIN, FET General Purpose Small Signal 开关 晶体管 |
| 文件： | 总5页 (文件大小：679K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
2SK365
TOSHIBA Field Effect Transistor Silicon N Channel Junction Type
2SK365
For Audio Amplifier, Analog-Switch, Constant Current
and Impedance Converter Applications
Unit: mm
•
•
•
•
High breakdown voltage: V
= −50 V
GDS
High input impedance: I
= −1.0 nA (max) (V
= −30 V)
GSS
GS
Low R
: R
= 80 Ω (typ.) (I
= 5 mA)
DS (ON) DS (ON)
DSS
Small package
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Gate-drain voltage
Symbol
Rating
Unit
V
−50
10
V
GDS
Gate current
I
mA
mW
°C
G
Drain power dissipation
Junction temperature
Storage temperature range
P
200
D
T
j
125
T
stg
−55~125
°C
Note: Using continuously under heavy loads (e.g. the application of
high temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e.
operating temperature/current/voltage, etc.) are within the
absolute maximum ratings.
JEDEC
JEITA
―
―
TOSHIBA
2-4E1C
Weight: 0.13 g (typ.)
Please design the appropriate reliability upon reviewing the
Toshiba Semiconductor Reliability Handbook (“Handling
Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and
estimated failure rate, etc).
Electrical Characteristics (Ta = 25°C)
Characteristics
Gate cut-off current
Symbol
Test Condition
Min
Typ.
Max
Unit
I
V
V
= −30 V, V
= 0
⎯
⎯
⎯
−1.0
nA
V
GSS
GS
DS
DS
Gate-drain breakdown voltage
V
= 0, I = −100 μA
−50
⎯
(BR) GDS
G
I
DSS
Drain current
V
= 10 V, V
= 0
1.2
⎯
14
mA
DS
GS
(Note 1)
Gate-source cut-off voltage
Forward transfer admittance
Input capacitance
V
V
V
V
V
V
= 10 V, I = 0.1 μA
−0.25
5.0
⎯
⎯
19
13
3
−1.5
⎯
V
mS
pF
pF
Ω
GS (OFF)
⎪Y ⎪
DS
DS
DS
DG
DS
D
= 10 V, V
= 10 V, V
= 0, f = 1 kHz (Note 2)
= 0, f = 1 MHz
fs
GS
GS
C
⎯
iss
rss
Reverse transfer capacitance
Drain-source ON resistance
C
= 10 V, I = 0, f = 1 MHz
⎯
⎯
D
R
= 10 mV, V
= 0
GS
(Note 2)
⎯
80
⎯
DS (ON)
Note 1:
I
classification Y: 1.2~3.0 mA, GR: 2.6~6.5 mA, BL: 6~14 mA
DSS
Note 2: Condition of the typical value I
= 5 mA
DSS
1
2007-11-01
2SK365
2
2007-11-01
2SK365
3
2007-11-01
2SK365
4
2007-11-01
2SK365
RESTRICTIONS ON PRODUCT USE
20070701-EN GENERAL
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
5
2007-11-01
相关型号：
2SK365-GR
TRANSISTOR N-CHANNEL, Si, SMALL SIGNAL, JFET, 2-4E1C, 3 PIN, FET General Purpose Small Signal
TOSHIBA
2SK365-Y
TRANSISTOR N-CHANNEL, Si, SMALL SIGNAL, JFET, 2-4E1C, 3 PIN, FET General Purpose Small Signal
TOSHIBA
2SK3653
Small Signal Field-Effect Transistor, 0.01A I(D), 1-Element, N-Channel, Silicon, Junction FET, 0814, SOF-3
NEC
2SK3653-A
Small Signal Field-Effect Transistor, 0.01A I(D), 1-Element, N-Channel, Silicon, Junction FET, 0814, SOF-3
NEC
©2020 ICPDF网 联系我们和版权申明