2SD2636 [TOSHIBA]
TRANSISTOR 8 A, 160 V, NPN, Si, POWER TRANSISTOR, 2-16C1A, 3 PIN, BIP General Purpose Power;
| 型号： | 2SD2636 |
| 厂家： | 
TOSHIBA |
| 描述： | TRANSISTOR 8 A, 160 V, NPN, Si, POWER TRANSISTOR, 2-16C1A, 3 PIN, BIP General Purpose Power 局域网 开关 晶体管 |
| 文件： | 总5页 (文件大小：264K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
2SD2636
TOSHIBA Transistor Silicon NPN Triple Diffused Type (Darlington power transistor)
2SD2636
Power Amplifier Applications
Unit: mm
High-Power Switching Applications
•
High-breakdown voltage: V
= 160 V (min)
CEO
Absolute Maximum Ratings (Ta = 25°C)
Characteristic
Collector-base voltage
Symbol
Rating
Unit
V
CBO
V
CEO
V
EBO
160
V
V
V
Collector-emitter voltage
Emitter-base voltage
160
5
DC
I
8
C
Collector current
A
Pulse
I
15
1
CP
1.Base
Base current
I
A
B
2.Collector(heatsink)
3.Emitter
Collector power dissipation(Tc=25℃）
Junction temperature
P
100
W
°C
°C
C
T
150
j
JEDEC
―
―
Storage temperature range
T
stg
−55 to 150
JEITA
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e.
TOSHIBA
2-16C1A
Weight: 4.7 g (typ.)
operating temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/"Derating Concept and Methods") and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Equivalent Circuit
Collector
Base
≈ 30 Ω
Emitter
1
2010-10-04
2SD2636
Electrical Characteristics (Ta = 25°C)
Characteristic
Symbol
Test Conditions
= 160 V, I = 0
Min
Typ.
Max
Unit
Collector cut-off current
I
V
V
―
―
―
―
―
―
―
―
―
35
10
10
μA
μA
V
CBO
CB
EB
E
Emitter cut-off current
I
= 5 V, I = 0
C
EBO
(BR) CEO
Collector-emitter breakdown voltage
V
I
= 10 mA, I = 0
160
500
5000
―
―
C
B
h
h
V
V
= 4 V, I = 1 A
―
FE (1)
FE (2)
CE
CE
C
DC current gain
= 4 V, I = 7 A
15000
3.0
3.0
―
C
Collector-emitter saturation voltage
Base-emitter voltage
V
I
= 7 A, I = 7 mA
V
V
CE (sat)
C
B
V
V
V
=4 V, I = 7 A
―
BE
CE
CE
C
Transition frequency
f
= 10 V, I = 1 A
C
―
MHz
T
20μs
VCC
50V
OUT
≒
Turn-on Time
t
―
―
―
0.7
3.5
0.6
―
―
―
on
IB1
0
RL=7 Ω
IB2
IB1
Switching Time
μs
Storage Time
Fall Time
t
stg
IN
IB2
t
f
IB1=7mA,IB2=7mA
Duty Cycle＜1％
Marking
TOSHIBA
D2636
Part No. (or abbreviation code)
Lot No.
Note 2
Note 2 : A line under a Lot No. identifies the indication of product Labels.
[[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]]
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS
compatibility of Product.
The RoHS is the Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the
restriction of the use of certain hazardous substances in electrical and electronic equipment.
2
2010-10-04
2SD2636
I
– V
hFE – I
C
C
CE
10
8
100000
10000
Common emitter
Tc = 25°C
Single non-repetitive pulse
100
25
0.6
0.8
1.0
0.5
6
0.4
0.3
1000
100
10
Tc = −55°C
4
2
Common emitter
= 4 V
IB = 0.2 mA
V
CE
Single non-repetitive pulse
0
0
2
4
6
8
10
12
0.1
1
10
100
Collector-emitter voltage
V
(V)
Collector current
I
(A)
C
CE
V
– I
V
– I
BE (sat) C
CE (sat)
C
100
10
1
100
Common emitter
/I = 1000
Common emitter
/I = 1000
I
I
C
B
C
B
Single non-repetitive pulse
Single non-repetitive pulse
10
100
Tc = −55°C
Tc = −55°C
25
1
100
25
0.1
0.1
0.1
0.1
1
10
100
1
10
100
Collector current
I
(A)
Collector current
I
(A)
C
C
I – V
C
P – Ta
C
BE
8
6
120
100
Common emitter
= 4 V
Tc = Ta infinite heatsink
V
CE
Single non-repetitive pulse
80
60
40
100
25
Ta = −55°C
4
2
0
20
0
0
25
50
75
100
125
150
175
0
1
2
3
4
Base-emitter voltage
V
(V)
BE
Ambient Temperature Ta (℃)
3
2010-10-04
2SD2636
Safe Operating Area
100
10
10ms*
I
max (pulsed)*
C
50ms*
I
max (continuous)
C
100ms*
DC operation
Tc = 25°C
1
0. 1
0.01
*:Single non-repetitive pulse
Ta = 25°C
characteristic curves must be de-rated
linearly with increase in temperature.
V
max
100
CEO
0.1
1
10
1000
Collector-emitter voltage
V
(V)
CE
4
2010-10-04
2SD2636
RESTRICTIONS ON PRODUCT USE
•
•
•
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR
APPLICATIONS.
•
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
•
•
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
5
2010-10-04
相关型号：
2SD2641
Power Bipolar Transistor, 6A I(C), 110V V(BR)CEO, 1-Element, NPN, Silicon, Plastic/Epoxy, 3 Pin, MT-100, TO-3P, 3 PIN
ALLEGRO
2SD2641O
Power Bipolar Transistor, 6A I(C), 110V V(BR)CEO, 1-Element, NPN, Silicon, Plastic/Epoxy, 3 Pin, MT-100, TO-3P, 3 PIN
ALLEGRO
2SD2641P
Power Bipolar Transistor, 6A I(C), 110V V(BR)CEO, 1-Element, NPN, Silicon, Plastic/Epoxy, 3 Pin, MT-100, TO-3P, 3 PIN
ALLEGRO
2SD2641Y
Power Bipolar Transistor, 6A I(C), 110V V(BR)CEO, 1-Element, NPN, Silicon, Plastic/Epoxy, 3 Pin, MT-100, TO-3P, 3 PIN
ALLEGRO
2SD2641Y
Power Bipolar Transistor, 6A I(C), 110V V(BR)CEO, 1-Element, NPN, Silicon, Plastic/Epoxy, 3 Pin, MT100, TO-3P, 3 PIN
SANKEN
©2020 ICPDF网 联系我们和版权申明