BQ3287A-I [TI]
1 TIMER(S), REAL TIME CLOCK, PDIP24, T TYPE MODULE, DIP-24;![BQ3287A-I](http://pdffile.icpdf.com/pdf2/p00265/img/icpdf/BQ3287MT-K_1594164_icpdf.jpg)
型号: | BQ3287A-I |
厂家: | ![]() |
描述: | 1 TIMER(S), REAL TIME CLOCK, PDIP24, T TYPE MODULE, DIP-24 光电二极管 外围集成电路 |
文件: | 总9页 (文件大小:312K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
Not Recommended For New Designs
bq3287/bq3287A
(
)
Real-Time Clock RTC Module
➤ Calendar in day of the week, day
of the month, months, and years
with automatic leap-year adjust-
ment
bq3287A version is identical to the
bq3287, with the addition of the RAM
clear input.
Features
➤ Dir ect clock/ca len da r r epla ce-
m en t for IBM® AT-com pa t ible
computers and other applications
The bq3287 is a fully compatible
r e a l-t im e clock for I B M AT-
compatible computers and other ap-
p lica t ion s . T h e b q 3 2 8 7 w r it e -
pr ot ect s t h e clock, ca len da r, a n d
storage registers during power fail-
u r e. Th e in t egr a l ba cku p en er gy
source then maintains data and op-
erates the clock and calendar.
➤ Programmable square wave out-
➤ Functionally compatible with the
put
DS1287/DS1287A and MC146818A
➤ Three individually maskable in-
➤ 114 bytes of general nonvolatile
terrupt event flags:
storage
- Periodic rates from 122 µs to
➤ Integral lithium cell and crystal
500 ms
➤ 160 ns cycle time allows fast bus
As shipped from Benchma rq, the
real time clock is turned off to maxi-
mize battery capacity for in-system
operation.
- Time-of-day alarm once per
operation
second to once per day
➤ Selectable Intel or Motorola bus
timing
- End-of-clock update cycle
➤ B e t t e r t h a n on e m in u t e p e r
➤ 14 bytes for clock/calendar and
The bq3287 is functionally equiva-
lent to the bq3285, except that the
battery (16, 20) and crystal (2, 3)
pins are not accessible. These pins
are connected internally to a coin
cell and quartz crystal. The coin cell
is sized to provide 10 years of data
retention and clock operation in the
absence of power. For a complete de-
scription of features, operating con-
dit ion s, elect r ica l ch a r a ct er ist ics,
bus timing, and pin descriptions, see
the bq3285 data sheet.
control
month clock accuracy
➤ BCD or binary format for clock
and calendar data
General Description
➤ Time of day in seconds, minutes,
Th e CMOS bq3287/bq3287A is a
low-power microprocessor periph-
eral providing a time-of-day clock
and 100-year calendar with alarm
fea t u r es a n d ba t t er y oper a t ion .
O t h e r fe a t u r e s in clu d e t h r e e
maskable interrupt sources, square-
wave output, and 114 bytes of gen-
e r a l n on vola t ile s t or a ge. Th e
and hours
- 12- or 24-hour format
- Optional daylight saving
adjustment
Pin Connections
Pin Names
AD0–AD7 Multiplexed address/data
RST
SQW
NC
Reset input
input/output
MOT
24
1
V
CC
Square wave output
No connect
MOT
CS
Bus type select input
Chip select input
NC
NC
23
22
2
3
SQW
NC
4
NC/RCL
NC
AD
AD
AD
AD
AD
AD
AD
21
20
19
18
17
16
15
14
13
0
1
2
3
4
5
6
5
RCL
RAM clear input
(bq3287A only)
AS
Address strobe input
Data strobe input
6
INT
7
RST
DS
NC
DS
8
9
VCC
VSS
+5V supply
Ground
R/W
INT
Read/write input
10
11
12
R/W
AS
CS
AD
7
Interrupt request output
V
SS
24-Pin DIP Module
PN328701.eps
Sept. 1996 D
1
Not Recommended For New Designs
bq3287/bq3287A
Absolute Maximum Ratings
Symbol
Parameter
Value
Unit
Conditions
VCC
DC voltage applied on VCC relative to VSS
-0.3 to 7.0
V
DC voltage applied on any pin excluding VCC
relative to VSS
VT
V
VT ≤ VCC + 0.3
-0.3 to 7.0
0 to +70
-20 to +70
-40 to +70
-40 to +70
-10 to +70
-20 to +70
260
°C
°C
°C
°C
°C
°C
°C
Commercial
Extended “I”
Commercial
Extended “I”
Commercial
Extended “I”
For 10 seconds
TOPR
Operating temperature
Storage temperature
Temperature under bias
TSTG
TBIAS
TSOLDER Soldering temperature
Note:
Permanent device damage may occur if Absolu te Ma xim u m Ra tin gs are exceeded. Functional opera-
tion should be limited to the Recommended DC Operating Conditions detailed in this data sheet. Expo-
sure to conditions beyond the operational limits for extended periods of time may affect device reliability.
Recommended DC Operating Conditions (T = T
)
OPR
A
Symbol
VCC
Parameter
Supply voltage
Minimum
Typical
Maximum
Unit
V
4.5
0
5.0
5.5
0
VSS
VIL
VIH
Supply voltage
0
-
V
Input low voltage
Input high voltage
-0.3
2.2
0.8
V
-
VCC + 0.3
V
Note:
Typical values indicate operation at TA = 25°C.
DC Electrical Characteristics (T = T
, V
= 5V ± 10%)
A
OPR CC
Symbol
Parameter
Minimum Typical Maximum
Unit
Conditions/Notes
VIN = VSS to VCC
ILI
Input leakage current
-
-
-
-
± 1
± 1
µA
AD0–AD7, INT and SQW
in high impedance
ILO
Output leakage current
µA
VOH
VOL
Output high voltage
Output low voltage
2.4
-
-
-
-
V
V
IOH = -1.0 mA
IOL = 4.0 mA
0.4
Min. cycle, duty = 100%,
IOH = 0mA, IOL = 0mA
ICC
Operating supply current
-
7
15
mA
VSO
Supply switch-over voltage
Power-fail-detect voltage
-
3.0
-
V
V
VPFD
4.0
4.17
4.35
Internal 30K pull-up
(bq3287A only)
IRCL
Input current when RCL = VSS
-
-
-
-
185
µA
µA
IMOTH
Input current when MOT =
VCC
-185
Internal 30K pull-down
Note:
Typical values indicate operation at TA = 25°C, VCC = 5V.
Sept. 1996 D
2
Not Recommended For New Designs
bq3287/bq3287A
Power-Down/Power-Up Timing (T = T
A
OPR)
Symbol
Parameter
Minimum
300
Typical
Maximum
Unit
µs
Conditions
tF
VCC slew from 4.5V to 0V
VCC slew from 0V to 4.5V
-
-
-
-
tR
100
µs
Internal write-protection
period after VCC passes VPFD
on power-up.
tCSR
CS at VIH after power-up
20
10
-
-
200
-
ms
Data-retention and time-
keeping time
tDR
years TA = 25°C.
Note:
Clock accuracy is better than ± 1 minute per month at 25°C for the period of tDR.
Ca u tion : Nega tive u n d er sh oots below th e a bsolu te m a xim u m r a tin g of -0.3V in ba tter y-ba ck u p m od e
m a y a ffect d a ta in tegr ity.
Power-Down/Power-Up Timing
Sept. 1996 D
3
Not Recommended For New Designs
bq3287/bq3287A
24-Pin MT (T-type module)
24-Pin MT (T-type module)
Dimension
Minimum
0.360
0.015
0.015
0.008
1.320
0.685
0.590
0.090
0.120
0.100
Maximum
0.375
-
A
A1
B
C
D
E
0.022
0.013
1.335
0.700
0.620
0.110
0.130
0.120
e
G
L
S
All dimensions are in inches.
Sept. 1996 D
4
Not Recommended For New Designs
bq3287/bq3287A
Data Sheet Revision History
Change No.
Page No.
Description
Address strobe input
Nature of Change
Clarification
1
1
Was 4.1 min, 4.25 max;
is 4.0 min, 4.35 max
1
2
2
1
Power-fail detect voltage VPFD
Was : “As shipped from Benchmarq, the backup cell
is electrically isolated from the memory. ”
Is: “As shipped from Benchmarq, the backup cell is
electrically isolated from the active circuitry. ”
Clarification
Changed temperature from N (industrial, -40 to
+85°C) to I (extended, -20 to +70°C)
2
3
2, 4
2
Specification change
Changed values
IRCL max. was 275; is now 185. Pull-up = 30K
IMOTH max. was -275; is now -185. Pull-down = 30K
Notes:
Change 1 = Nov. 1992 B changes from June 1991 A.
Change 2 = Nov. 1995 C changes from Nov. 1992 B.
Change 3 = Sept. 1996 D changes from Nov. 1995 C.
Ordering Information
bq3287
MT -
Tem p er a tu r e:
blank = Commercial (0 to +70°C)
I = Extended* (-20 to +70°C)
Pa ck a ge Op tion :
MT = T-type module
RAM Clea r Op tion :
A = RAM clear on pin 21
no mark = No connect on pin 21
Device:
bq3287 Real-Time Clock Module
*Contact factory for availability.
Sept. 1996 D
5
PACKAGE OPTION ADDENDUM
www.ti.com
6-Jun-2013
PACKAGING INFORMATION
Orderable Device
BQ3287AMT-I
Status Package Type Package Pins Package
Eco Plan Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
-20 to 70
0 to 70
Device Marking
Samples
Drawing
Qty
(1)
(2)
(3)
(4/5)
LIFEBUY DIP MODULE
MT
24
24
24
24
15
Pb-Free
(RoHS)
Call TI
Call TI
Call TI
Call TI
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
BQ3287AMT-SB2
BQ3287MT-I
LIFEBUY DIP MODULE
LIFEBUY DIP MODULE
LIFEBUY DIP MODULE
MT
MT
MT
15
15
15
Pb-Free
(RoHS)
Pb-Free
(RoHS)
-20 to 70
0 to 70
BQ3287MT-SB2
Pb-Free
(RoHS)
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
6-Jun-2013
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
MECHANICAL DATA
MPDI064 – MAY 2001
MT (R-PDIP-T**)
PLASTIC DUAL-IN-LINE
28 PINS SHOWN
Inches
Max.
Millimeters
Min.
9.14
Max.
Dimension
Min.
0.360
0.015
0.015
0.008
1.320
1.520
0.710
0.590
0.090
0.110
0.100
0.390
–
A
9.91
–
A1
B
0.38
0.022
0.56
0.33
0.38
0.20
C
0.013
1.335
1.535
0.740
D/24 PIN
D/28 PIN
33.53
38.61
18.03
33.91
38.99
18.80
16.00
2.79
E
e
D
14.99
2.29
0.630
0.110
G
L
3.30
2.79
2.54
0.130
0.120
S
3.05
E
A1
A
C
B
L
S
G
e
4201978/A 03/01
NOTES: A. All linear dimensions are in inches (mm).
B. This drawing is subject to change without notice.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251–1443
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/industrial
www.ti.com/medical
Medical
Logic
Security
www.ti.com/security
Power Mgmt
Microcontrollers
RFID
power.ti.com
Space, Avionics and Defense
Video and Imaging
www.ti.com/space-avionics-defense
www.ti.com/video
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/omap
OMAP Applications Processors
Wireless Connectivity
TI E2E Community
e2e.ti.com
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated
相关型号:
©2020 ICPDF网 联系我们和版权申明