ADC12D500RFIUT/NOPB [TI]
12-Bit, 1.6/1.0 GSPS RF Sampling ADC; 12位， 1.6 / 1.0 GSPS RF采样ADC
| 型号： | ADC12D500RFIUT/NOPB |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | 12-Bit, 1.6/1.0 GSPS RF Sampling ADC |
| 文件： | 总84页 (文件大小：1970K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
ADC12D500RF, ADC12D800RF
ADC12D800/500RF 12-Bit, 1.6/1.0 GSPS RF Sampling ADC
Data Manual
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Literature Number: SNAS502E
July 2011–Revised March 2013
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
Contents
1
2
Introduction ........................................................................................................................ 7
1.1
1.2
1.3
Features ...................................................................................................................... 7
Applications .................................................................................................................. 7
Description ................................................................................................................... 7
Device Information .............................................................................................................. 8
2.1
2.2
2.3
2.4
Block Diagram ............................................................................................................... 8
RF Performance ............................................................................................................. 9
ADC12D800/500RF Connection Diagram ............................................................................. 10
Ball Descriptions and Equivalent Circuits .............................................................................. 11
3
Electrical Specifications ..................................................................................................... 19
3.1
3.2
3.3
3.4
Absolute Maximum Ratings .............................................................................................. 19
Operating Ratings ......................................................................................................... 19
Package Thermal Resistance ............................................................................................ 20
Converter Electrical Characteristics
Static Converter Characteristics ......................................................................................... 20
Converter Electrical Characteristics
Dynamic Converter Characteristics ..................................................................................... 21
Converter Electrical Characteristics
Analog Input/Output and Reference Characteristics .................................................................. 24
Converter Electrical Characteristics
I-Channel to Q-Channel Characteristics ................................................................................ 25
Converter Electrical Characteristics
3.5
3.6
3.7
3.8
3.9
Sampling Clock Characteristics ......................................................................................... 25
Converter Electrical Characteristics
AutoSync Feature Characteristics ....................................................................................... 25
3.10 Converter Electrical Characteristics
Digital Control and Output Pin Characteristics ........................................................................ 26
3.11 Converter Electrical Characteristics
Power Supply Characteristics ............................................................................................ 27
3.12 Converter Electrical Characteristics
AC Electrical Characteristics ............................................................................................. 27
3.13 Converter Electrical Characteristics Serial Port Interface ............................................................ 29
3.14 Converter Electrical Characteristics Calibration ....................................................................... 29
Specification Definitions .................................................................................................... 30
4
4.1
Transfer Characteristic .................................................................................................... 32
Timing Diagrams .......................................................................................................... 33
4.2
5
6
Typical Performance Plots .................................................................................................. 36
Functional Description ....................................................................................................... 46
6.1
Overview .................................................................................................................... 46
Control modes ............................................................................................................. 46
6.2
6.2.1
Non-Extended Control Mode .................................................................................. 46
6.2.1.1 Dual Edge Sampling Pin (DES) .................................................................. 47
6.2.1.2 Non-Demultiplexed Mode Pin (NDM) ............................................................ 47
6.2.1.3 Dual Data Rate Phase Pin (DDRPh) ............................................................ 47
6.2.1.4 Calibration Pin (CAL) .............................................................................. 48
6.2.1.5 Calibration Delay Pin (CalDly) .................................................................... 48
6.2.1.6 Power Down I-channel Pin (PDI) ................................................................ 48
6.2.1.7 Power Down Q-channel Pin (PDQ) .............................................................. 48
6.2.1.8 Test Pattern Mode Pin (TPM) .................................................................... 48
6.2.1.9 Full-Scale Input Range Pin (FSR) ............................................................... 49
6.2.1.10 AC/DC-Coupled Mode Pin (VCMO) ............................................................... 49
6.2.1.11 LVDS Output Common-mode Pin (VBG) ........................................................ 49
Extended Control Mode ........................................................................................ 49
6.2.2
2
Contents
Copyright © 2011–2013, Texas Instruments Incorporated
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
6.2.2.1 The Serial Interface ................................................................................ 49
Features .................................................................................................................... 51
6.3
6.3.1
Input Control and Adjust ....................................................................................... 53
6.3.1.1 AC/DC-coupled Mode ............................................................................. 53
6.3.1.2 Input Full-Scale Range Adjust .................................................................... 53
6.3.1.3 Input Offset Adjust ................................................................................. 53
6.3.1.4 DES/Non-DES Mode .............................................................................. 53
6.3.1.5 DES Timing Adjust ................................................................................. 54
6.3.1.6 Sampling Clock Phase Adjust .................................................................... 54
Output Control and Adjust ..................................................................................... 54
6.3.2.1 SDR / DDR Clock .................................................................................. 54
6.3.2.2 LVDS Output Differential Voltage ................................................................ 55
6.3.2.3 LVDS Output Common-Mode Voltage .......................................................... 55
6.3.2.4 Output Formatting .................................................................................. 56
6.3.2.5 Demux/Non-demux Mode ......................................................................... 56
6.3.2.6 Test Pattern Mode ................................................................................. 56
6.3.2.7 Time Stamp ......................................................................................... 57
Calibration Feature ............................................................................................. 57
6.3.3.1 Calibration Control Pins and Bits ................................................................ 57
6.3.3.2 How to Execute a Calibration .................................................................... 58
6.3.3.3 Power-on Calibration .............................................................................. 58
6.3.3.4 On-command Calibration ......................................................................... 58
6.3.3.5 Calibration Adjust .................................................................................. 59
6.3.3.6 Read/Write Calibration Settings .................................................................. 59
6.3.3.7 Calibration and Power-Down ..................................................................... 60
6.3.3.8 Calibration and the Digital Outputs .............................................................. 60
Power Down ..................................................................................................... 60
6.3.2
6.3.3
6.3.4
6.4
Applications Information .................................................................................................. 60
6.4.1
THE ANALOG INPUTS ........................................................................................ 60
6.4.1.1 Acquiring the Input ................................................................................. 60
6.4.1.2 Driving the ADC in DES Mode ................................................................... 60
6.4.1.3 FSR and the Reference Voltage ................................................................. 61
6.4.1.4 Out-Of-Range Indication .......................................................................... 62
6.4.1.5 Maximum Input Range ............................................................................ 62
6.4.1.6 AC-coupled Input Signals ......................................................................... 62
6.4.1.7 DC-coupled Input Signals ......................................................................... 63
6.4.1.8 Single-Ended Input Signals ....................................................................... 63
THE CLOCK INPUTS .......................................................................................... 63
6.4.2.1 CLK Coupling ....................................................................................... 63
6.4.2.2 CLK Frequency ..................................................................................... 64
6.4.2.3 CLK Level ........................................................................................... 64
6.4.2.4 CLK Duty Cycle .................................................................................... 64
6.4.2.5 CLK Jitter ............................................................................................ 64
6.4.2.6 CLK Layout ......................................................................................... 64
THE LVDS OUTPUTS ......................................................................................... 65
6.4.3.1 Common-mode and Differential Voltage ........................................................ 65
6.4.3.2 Output Data Rate .................................................................................. 65
6.4.3.3 Terminating Unused LVDS Output Pins ........................................................ 65
SYNCHRONIZING MULTIPLE ADC12D800/500RFS IN A SYSTEM ................................... 65
6.4.4.1 AutoSync Feature .................................................................................. 66
6.4.4.2 DCLK Reset Feature .............................................................................. 66
SUPPLY/GROUNDING, LAYOUT AND THERMAL RECOMMENDATIONS ........................... 67
6.4.5.1 Power Planes ....................................................................................... 67
6.4.2
6.4.3
6.4.4
6.4.5
Copyright © 2011–2013, Texas Instruments Incorporated
Contents
3
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
6.4.5.2 Bypass Capacitors ................................................................................. 67
6.4.5.3 Ground Planes ..................................................................................... 67
6.4.5.4 Power System Example ........................................................................... 68
6.4.5.5 Thermal Management ............................................................................. 68
SYSTEM POWER-ON CONSIDERATIONS ................................................................ 70
6.4.6.1 Power-on, Configuration, and Calibration ....................................................... 70
6.4.6.2 Power-on and Data Clock (DCLK) ............................................................... 71
RECOMMENDED SYSTEM CHIPS ......................................................................... 72
6.4.7.1 Temperature Sensor ............................................................................... 72
6.4.7.2 Clocking Device .................................................................................... 73
6.4.7.3 Amplifiers for the Analog Input ................................................................... 73
6.4.7.4 Balun Recommendations for Analog Input ..................................................... 73
6.4.6
6.4.7
6.5
Register Definitions ....................................................................................................... 74
Revision History ......................................................................................................................... 80
4
Contents
Copyright © 2011–2013, Texas Instruments Incorporated
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
List of Figures
2-1
2-2
2-3
4-1
4-2
4-3
4-4
4-5
4-6
4-7
4-8
4-9
6-1
6-2
6-3
6-4
6-5
6-6
6-7
6-8
6-9
6-10
6-11
6-12
6-13
6-14
6-15
6-16
ADC12D800RF DES Mode IMD3 ................................................................................................
9
ADC12D800RF DES Mode FFT ............................................................................................... 10
See Package Number NXA0292A ............................................................................................. 10
LVDS Output Signal Levels ..................................................................................................... 31
Input / Output Transfer Characteristic ........................................................................................ 33
Clocking in 1:2 Demux Non-DES Mode*...................................................................................... 33
Clocking in Non-Demux Non-DES Mode*..................................................................................... 34
Clocking in 1:4 Demux DES Mode*............................................................................................ 34
Clocking in Non-Demux Mode DES Mode*................................................................................... 34
Data Clock Reset Timing (Demux Mode) ..................................................................................... 35
Power-on and On-Command Calibration Timing............................................................................. 35
Serial Interface Timing........................................................................................................... 35
Serial Data Protocol - Read Operation ........................................................................................ 51
Serial Data Protocol - Write Operation ........................................................................................ 51
DDR DCLK-to-Data Phase Relationship ...................................................................................... 55
SDR DCLK-to-Data Phase Relationship ...................................................................................... 55
Driving DESIQ Mode............................................................................................................. 61
AC-coupled Differential Input ................................................................................................... 62
Single-Ended to Differential Conversion Using a Balun..................................................................... 63
Differential Input Clock Connection ............................................................................................ 64
AutoSync Example ............................................................................................................... 66
Power and Grounding Example ................................................................................................ 68
HSBGA Conceptual Drawing ................................................................................................... 69
Power-on with Control Pins set by Pull-up/down Resistors................................................................. 71
Power-on with Control Pins set by FPGA pre Power-on Cal............................................................... 71
Power-on with Control Pins set by FPGA post Power-on Cal.............................................................. 71
Supply and DCLK Ramping..................................................................................................... 72
Typical Temperature Sensor Application...................................................................................... 73
Copyright © 2011–2013, Texas Instruments Incorporated
List of Figures
5
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
List of Tables
2-1
2-2
2-3
2-4
6-1
6-2
6-3
6-4
6-5
6-6
Analog Front-End and Clock Balls ............................................................................................. 11
Control and Status Balls......................................................................................................... 13
Power and Ground Balls ........................................................................................................ 16
High-Speed Digital Outputs ..................................................................................................... 17
Non-ECM Pin Summary......................................................................................................... 47
Serial Interface Pins.............................................................................................................. 49
Command and Data Field Definitions ......................................................................................... 50
Features and Modes ............................................................................................................ 52
Supported Demux, Data Rate Modes ......................................................................................... 56
Test Pattern by Output Port in
Demux Mode...................................................................................................................... 56
6-7
Test Pattern by Output Port in
Non-Demux Mode................................................................................................................ 57
6-8
Calibration Pins................................................................................................................... 58
Unused Analog Input Recommended Termination .......................................................................... 61
Unused AutoSync and DCLK Reset Pin Recommendation ................................................................ 66
Temperature Sensor Recommendation ....................................................................................... 72
Amplifier Recommendations .................................................................................................... 73
Balun Recommendations........................................................................................................ 73
Register Addresses .............................................................................................................. 74
Configuration Register 1......................................................................................................... 74
Reserved .......................................................................................................................... 75
I-channel Offset Adjust .......................................................................................................... 75
I-channel Full Scale Range Adjust............................................................................................. 75
Calibration Adjust................................................................................................................. 76
Calibration Values................................................................................................................ 76
Reserved - ADC12D800RF ..................................................................................................... 76
Reserved - ADC12D500RF ..................................................................................................... 76
DES Timing Adjust ............................................................................................................... 77
Reserved .......................................................................................................................... 77
Reserved .......................................................................................................................... 77
Q-channel Offset Adjust ......................................................................................................... 77
Q-channel Full-Scale Range Adjust ........................................................................................... 78
Aperture Delay Coarse Adjust .................................................................................................. 78
Aperture Delay Fine Adjust ..................................................................................................... 78
AutoSync .......................................................................................................................... 79
Reserved .......................................................................................................................... 79
6-9
6-10
6-11
6-12
6-13
6-14
6-15
6-16
6-17
6-18
6-19
6-20
6-21
6-22
6-23
6-24
6-25
6-26
6-27
6-28
6-29
6-30
6-31
6
List of Tables
Copyright © 2011–2013, Texas Instruments Incorporated
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
ADC12D800/500RF 12-Bit, 1.6/1.0 GSPS RF Sampling ADC
Check for Samples: ADC12D500RF, ADC12D800RF
1
Introduction
1.1 Features
12
• Excellent Noise and Linearity up to and Above
fIN = 2.7 GHz
• Key Specifications
– Resolution 12 Bits
• Configurable to Either 1.6/1.0 GSPS Interleaved
or 800/500 MSPS Dual ADC
• New DESCLKIQ Mode for High Bandwidth, High
Sampling Rate Apps
– Interleaved 1.6/1.0 GSPS ADC
•
IMD3 (Fin = 2.7GHz @ -13dBFS): -63/-61
dBc (typ)
•
IMD3 (Fin = 2.7GHz @ -16dBFS): -71/-69
dBc (typ)
• Pin-Compatible with ADC1xD1x00
• AutoSync Feature for Multi-Chip
Synchronization
• Internally Terminated, Buffered, Differential
Analog Inputs
• Interleaved Timing Automatic and Manual Skew
Adjust
• Test Patterns at Output for System Debug
•
•
•
Noise Floor: -152.2/-150.5 dBm/Hz (typ)
Noise Power Ratio: 50.4/50.7 dB (typ)
Power: 2.50/2.02 W (typ)
– Dual 800/500 MSPS ADC, Fin = 498 MHz
•
•
•
•
ENOB: 9.5/9.6 Bits (typ)
SNR: 59.7/59.7 dB (typ)
SFDR: 71.2/72 dBc (typ)
Power per Channel: 1.25/1.01 W (typ)
• Time Stamp Feature to Capture External
Trigger
• Programmable Gain, Offset, and tAD Adjust
Feature
• 1:1 Non-Demuxed or 1:2 Demuxed LVDS
Outputs
1.2 Applications
•
3G/4G Wireless Basestation
•
•
•
•
•
SIGINT
–
–
Receive Path
DPD Path
RADAR / LIDAR
Wideband Communications
Consumer RF
•
•
•
Wideband Microwave Backhaul
RF Sampling Software Defined Radio
Military Communications
Test and Measurement
1.3 Description
The 12-bit 1.6/1.0 GSPS ADC12D800/500RF is an RF-sampling GSPS ADC that can directly sample input
frequencies up to and above 2.7 GHz. The ADC12D800/500RF augments the very large Nyquist zone of
TI’s GSPS ADCs with excellent noise and linearity performance at RF frequencies, extending its usable
range beyond the 7th Nyquist zone
The ADC12D800/500RF provides a flexible LVDS interface which has multiple SPI programmable options
to facilitate board design and FPGA/ASIC data capture. The LVDS outputs are compatible with IEEE
1596.3-1996 and supports programmable common mode voltage. The product is packaged in a lead-free
292-ball thermally enhanced BGA package over the rated industrial temperature range of -40°C to +85°C.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date. Products conform to
specifications per the terms of the Texas Instruments standard warranty. Production
processing does not necessarily include testing of all parameters.
Copyright © 2011–2013, Texas Instruments Incorporated
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
2
Device Information
2.1 Block Diagram
8
Device Information
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
2.2 RF Performance
-50
-60
-7dBFS
-10dBFS
-13dBFS
-16dBFS
-70
-80
-90
-100
0.0
0.5
1.0
1.5
2.0
2.5
3.0
FREQUENCY (GHz)
A. CW Blocker: Fin = 2710.47MHz; Total Power = -13dBFS
B. WCDMA Blocker: Fc = 2700MHz; Bandwidth = 3.84MHz; Total Power = -13dBFS
C. IMD3 Product Power = -73dBFS
Figure 2-1. ADC12D800RF DES Mode IMD3
0
Fin = 2.7GHz
-30
-60
-90
-120
470 475 480 485 490 495 500 505
FREQUENCY (MHz)
Figure 2-2. ADC12D800RF DES Mode FFT
Copyright © 2011–2013, Texas Instruments Incorporated
Device Information
9
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
2.3 ADC12D800/500RF Connection Diagram
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
GND
V_A
SDO
TPM
NDM
V_A
GND
V_E
GND_E DId0+
V_DR
DId3+ GND_DR DId6+
V_DR
DId9+ GND_DR DId11+ DId11- GND_DR
A
B
C
D
E
F
A
B
C
D
E
F
Vbg
Rtrim+
DNC
V_A
GND
Vcmo
Rtrim-
ECEb
Rext+
Rext-
SDI
CalRun
SCLK
GND
V_A
V_A
CAL
GND
NC
GND_E
V_E
V_E
DId0-
DId2+
DId2-
V_DR
DId3-
DId5+
DId5-
DId6-
DId8+
DId8-
DId9-
DId10+
DI0-
DI0+
V_DR
DI3+
DI1+
DI2+
DI4+
DI5+
DI6-
DI1-
DI2-
SCSb
GND
GND
DNC
V_TC
GND_E DId1+
DId4+
DId7+
DId10-
DNC
V_A
V_A
DId1-
DId4- GND_DR DId7-
V_DR GND_DR V_DR
DI4-
Tdiode+ DNC
GND_DR DI3-
GND_DR DI6+
DI5-
V_A
GND_TC Tdiode-
GND_DR
DI8-
V_TC GND_TC V_TC
DI7+
DI9+
DI7-
DI9-
DI8+
DI10+
DI11-
G
H
J
G
H
J
VinI+
VinI-
GND
GND
V_TC GND_TC V_A
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
DI10-
V_DR
GND_TC V_TC
VbiasI
V_DR
ORI+
ORQ+
DI11+
ORI-
VbiasI
V_TC GND_TC
V_TC GND_TC
DCLKI+ DCLKI-
K
L
K
L
VbiasQ
ORQ- DCLKQ+ DCLKQ-
VinQ- GND_TC V_TC
VbiasQ
GND_DR DQ11+
DQ11- GND_DR
M
N
P
R
T
M
N
P
R
T
VinQ+
V_TC GND_TC V_A
DQ9+
DQ7+
V_DR
V_DR
DQ9-
DQ7-
DQ6+
DQ3-
DQ10+
DQ8+
DQ6-
DQ10-
DQ8-
V_DR
DQ5-
DQ4-
DQ2-
DQ1-
V_TC GND_TC V_TC
V_TC
V_TC
V_A
V_A
GND_TC V_TC
GND_TC GND_TC GND
DQ5+
DQ4+
GND_TC CLK+
PDI
PDQ
DNC
FSR
3
GND
GND
DES
RCOut1-
DNC
V_A
V_E
V_A
DQd1-
V_DR
DQd4- GND_DR DQd7-
V_DR
V_DR GND_DR DQ3+
U
V
W
Y
U
V
W
Y
DCLK
CLK-
CalDly
RCOut2+ RCOut2-
GND_E DQd1+ DQd2-
DQd4+ DQd5-
DQd7+ DQd8- DQd10-
DQ0- GND_DR DQ2+
_RST+
DCLK
GND
DDRPh RCLK-
V_A
GND
GND
7
GND_E
V_E
V_E
DQd0-
DQd2+ DQd3-
DQd5+ DQd6-
DQd8+ DQd9- DQd10+ DQ0+
DQ1+
_RST-
GND
V_A
RCLK+ RCOut1+ V_A
GND_E DQd0+
V_DR
DQd3+ GND_DR DQd6+
V_DR
DQd9+ GND_DR DQd11+ DQd11- GND_DR
1
2
4
5
6
8
9
10
11
12
13
14
15
16
17
18
19
20
Figure 2-3. See Package Number NXA0292A
The center ground pins are for thermal dissipation and must be soldered to a ground plane to
ensure rated performance. See SUPPLY/GROUNDING, LAYOUT AND THERMAL
RECOMMENDATIONS for more information.
10
Device Information
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
2.4 Ball Descriptions and Equivalent Circuits
Table 2-1. Analog Front-End and Clock Balls
Ball No.
Name
Equivalent Circuit
Description
Differential signal I- and Q-inputs. In the Non-Dual
Edge Sampling (Non-DES) Mode, each I- and Q-
input is sampled and converted by its respective
channel with each positive transition of the CLK
input. In Non-ECM (Non-Extended Control Mode)
and DES Mode, both channels sample the I-input.
In Extended Control Mode (ECM), the Q-input
may optionally be selected for conversion in DES
Mode by the DEQ Bit (Addr: 0h, Bit 6).
V
A
50k
Each I- and Q-channel input has an internal
common mode bias that is disabled when DC-
coupled Mode is selected. Both inputs must be
either AC- or DC-coupled. The coupling mode is
selected by the VCMO Pin.
AGND
100
V
CMO
H1/J1
N1/M1
VinI+/-
VinQ+/-
Control from V
CMO
V
A
In Non-ECM, the full-scale range of these inputs is
determined by the FSR Pin; both I- and Q-
channels have the same full-scale input range. In
ECM, the full-scale input range of the I- and Q-
channel inputs may be independently set via the
Control Register (Addr: 3h and Addr: Bh). Note
that the high and low full-scale input range setting
in Non-ECM corresponds to the mid and minimum
full-scale input range in ECM.
50k
AGND
The input offset may also be adjusted in ECM.
V
A
Differential Converter Sampling Clock. In the Non-
DES Mode, the analog inputs are sampled on the
positive transitions of this clock signal. In the DES
Mode, the selected input is sampled on both
transitions of this clock. This clock must be AC-
coupled.
50k
50k
AGND
U2/V1
CLK+/-
100
V
BIAS
V
A
AGND
V
A
Differential DCLK Reset. A positive pulse on this
input is used to reset the DCLKI and DCLKQ
outputs of two or more ADC12D800/500RFs in
order to synchronize them with other
ADC12D800/500RFs in the system. DCLKI and
DCLKQ are always in phase with each other,
unless one channel is powered down, and do not
require a pulse from DCLK_RST to become
synchronized. The pulse applied here must meet
timing relationships with respect to the CLK input.
Although supported, this feature has been
AGND
V2/W1
DCLK_RST+/-
100
V
A
(1)
superseded by AutoSync.
AGND
(1) This pin/bit functionality is not tested in production test; performance is tested in the specified/default mode only.
Device Information
Copyright © 2011–2013, Texas Instruments Incorporated
11
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
Table 2-1. Analog Front-End and Clock Balls (continued)
Ball No.
Name
Equivalent Circuit
Description
Common Mode Voltage Output or Signal Coupling
Select. If AC-coupled operation at the analog
inputs is desired, this pin should be held at logic-
low level. This pin is capable of sourcing/ sinking
up to 100 µA. For DC-coupled operation, this pin
should be left floating or terminated into high-
impedance. In DC-coupled Mode, this pin provides
an output voltage which is the optimal common-
mode voltage for the input signal and should be
used to set the common-mode voltage of the
driving buffer.
V
A
V
CMO
200k
8 pF
C2
VCMO
Enable AC
Coupling
GND
V
A
Bandgap Voltage Output or LVDS Common-mode
Voltage Select. This pin provides a buffered
version of the bandgap output voltage and is
capable of sourcing/sinking 100 uA and driving a
load of up to 80 pF. Alternately, this pin may be
used to select the LVDS digital output common-
mode voltage. If tied to logic-high, the 1.2V LVDS
common-mode voltage is selected; 0.8V is the
default.
B1
VBG
GND
V
A
External Reference Resistor terminals. A 3.3 kΩ
±0.1% resistor should be connected between
Rext+/-. The Rext resistor is used as a reference
to trim internal circuits which affect the linearity of
the converter; the value and precision of this
resistor should not be compromised.
C3/D3
Rext+/-
V
GND
V
A
Input Termination Trim Resistor terminals. A 3.3
kΩ ±0.1% resistor should be connected between
Rtrim+/-. The Rtrim resistor is used to establish
the calibrated 100Ω input impedance of VinI, VinQ
and CLK. These impedances may be fine tuned
by varying the value of the resistor by a
C1/D2
Rtrim+/-
V
corresponding percentage; however, the tuning
range and performance is not specified for such
an alternate value.
GND
V
A
Tdiode_P
Temperature Sensor Diode Positive (Anode) and
Negative (Cathode) Terminals. This set of pins is
used for die temperature measurements. It has
not been fully characterized.
GND
A
E2/F3
Tdiode+/-
V
Tdiode_N
GND
12
Device Information
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
Table 2-1. Analog Front-End and Clock Balls (continued)
Ball No.
Name
Equivalent Circuit
Description
V
A
Reference Clock Input. When the AutoSync
feature is active, and the ADC12D800/500RF is in
Slave Mode, the internal divided clocks are
synchronized with respect to this input clock. The
delay on this clock may be adjusted when
synchronizing multiple ADCs. This feature is
50k
50k
AGND
Y4/W5
RCLK+/-
100
V
BIAS
V
A
available in ECM via Control Register (Addr: Eh).
(1)
AGND
V
A
Reference Clock Output 1 and 2. These signals
provide a reference clock at a rate of CLK/4, when
enabled, independently of whether the ADC is in
Master or Slave Mode. They are used to drive the
RCLK of another ADC12D800/500RF, to enable
automatic synchronization for multiple ADCs
(AutoSync feature). The impedance of each trace
from RCOut1 and RCOut2 to the RCLK of another
ADC12D800/500RF should be 100Ω differential.
Having two clock outputs allows the auto-
100W
100W
Y5/U6
V6/V7
RCOut1+/-
RCOut2+/-
-
+
synchronization to propagate as a binary tree. Use
the DOC Bit (Addr: Eh, Bit 1) to enable/ disable
this feature; default is disabled.(1)
A GND
(1) This pin/bit functionality is not tested in production test; performance is tested in the specified/default mode only.
Table 2-2. Control and Status Balls
Ball No.
Name
Equivalent Circuit
Description
Dual Edge Sampling (DES) Mode select. In the
Non-Extended Control Mode (Non-ECM), when
this input is set to logic-high, the DES Mode of
operation is selected, meaning that the VinI input
is sampled by both channels in a time-interleaved
manner. The VinQ input is ignored. When this
input is set to logic-low, the device is in Non-DES
Mode, i.e. the I- and Q-channels operate
V
A
V5
DES
independently. In the Extended Control Mode
(ECM), this input is ignored and DES Mode
selection is controlled through the Control Register
by the DES Bit (Addr: 0h, Bit 7); default is Non-
DES Mode operation.
GND
V
A
Calibration Delay select. By setting this input logic-
high or logic-low, the user can select the device to
wait a longer or shorter amount of time,
respectively, before the automatic power-on self-
calibration is initiated. This feature is pin-controlled
only and is always active during ECM and Non-
ECM.
V4
CalDly
GND
Copyright © 2011–2013, Texas Instruments Incorporated
Device Information
13
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
Table 2-2. Control and Status Balls (continued)
Ball No.
Name
Equivalent Circuit
Description
Calibration cycle initiate. The user can command
the device to execute a self-calibration cycle by
holding this input high a minimum of tCAL_H after
having held it low a minimum of tCAL_L. If this input
is held high at the time of power-on, the automatic
power-on calibration cycle is inhibited until this
input is cycled low-then-high. This pin is active in
both ECM and Non-ECM. In ECM, this pin is
logically OR'd with the CAL Bit (Addr: 0h, Bit 15)
in the Control Register. Therefore, both pin and bit
must be set low and then either can be set high to
execute an on-command calibration.
V
A
D6
CAL
GND
V
A
Calibration Running indication. This output is
logic-high while the calibration sequence is
executing. This output is logic-low otherwise.
B5
CalRun
GND
V
V
V
Power Down I- and Q-channel. Setting either input
to logic-high powers down the respective I- or Q-
channel. Setting either input to logic-low brings the
respective I- or Q-channel to a operational state
after a finite time delay. This pin is active in both
ECM and Non-ECM. In ECM, each Pin is logically
OR'd with its respective Bit. Therefore, either this
pin or the PDI and PDQ Bit in the Control Register
can be used to power-down the I- and Q-channel
(Addr: 0h, Bit 11 and Bit 10), respectively.
A
50 kW
U3
V3
PDI
PDQ
GND
A
Test Pattern Mode select. With this input at logic-
high, the device continuously outputs a fixed,
repetitive test pattern at the digital outputs. In the
ECM, this input is ignored and the Test Pattern
Mode can only be activated through the Control
Register by the TPM Bit (Addr: 0h, Bit 12).
A4
TPM
GND
A
Non-Demuxed Mode select. Setting this input to
logic-high causes the digital output bus to be in
the 1:1 Non-Demuxed Mode. Setting this input to
logic-low causes the digital output bus to be in the
1:2 Demuxed Mode. This feature is pin-controlled
only and remains active during ECM and Non-
ECM.
A5
NDM
GND
14
Device Information
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
Table 2-2. Control and Status Balls (continued)
Ball No.
Name
Equivalent Circuit
Description
Full-Scale input Range select. In Non-ECM, when
this input is set to logic-low or logic-high, the full-
scale differential input range for both I- and Q-
channel inputs is set to the lower or higher FSR
value, respectively. In the ECM, this input is
ignored and the full-scale range of the I- and Q-
channel inputs is independently determined by the
setting of Addr: 3h and Addr: Bh, respectively.
Note that the high (lower) FSR value in Non-ECM
corresponds to the mid (min) available selection in
ECM; the FSR range in ECM is greater.
V
V
V
V
V
A
Y3
W4
B3
C4
C5
FSR
GND
DDR Phase select. This input, when logic-low,
selects the 0° Data-to-DCLK phase relationship.
When logic-high, it selects the 90° Data-to-DCLK
phase relationship, i.e. the DCLK transition
indicates the middle of the valid data outputs. This
pin only has an effect when the chip is in 1:2
Demuxed Mode, i.e. the NDM pin is set to logic-
low. In ECM, this input is ignored and the DDR
phase is selected through the Control Register by
the DPS Bit (Addr: 0h, Bit 14); the default is 0°
Mode.
A
DDRPh
GND
A
Extended Control Enable bar. Extended feature
control through the SPI interface is enabled when
this signal is asserted (logic-low). In this case,
most of the direct control pins have no effect.
When this signal is de-asserted (logic-high), the
SPI interface is disabled, all SPI registers are
reset to their default values, and all available
settings are controlled via the control pins.
50 kW
100 kW
100 kW
ECE
GND
A
Serial Chip Select bar. In ECM, when this signal is
asserted (logic-low), SCLK is used to clock in
serial data which is present on SDI and to source
serial data on SDO. When this signal is de-
asserted (logic-high), SDI is ignored and SDO is in
tri-stated.
SCS
GND
A
Serial Clock. In ECM, serial data is shifted into
and out of the device synchronously to this clock
signal. This clock may be disabled and held logic-
low, as long as timing specifications are not
violated when the clock is enabled or disabled.
SCLK
GND
Copyright © 2011–2013, Texas Instruments Incorporated
Device Information
15
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
Table 2-2. Control and Status Balls (continued)
Ball No.
Name
Equivalent Circuit
Description
V
A
100 kW
Serial Data-In. In ECM, serial data is shifted into
the device on this pin while SCS signal is asserted
(logic-low).
B4
SDI
GND
V
A
Serial Data-Out. In ECM, serial data is shifted out
of the device on this pin while SCS signal is
asserted (logic-low). This output is tri-stated when
SCS is de-asserted.
A3
SDO
GND
Do Not Connect. These pins are used for internal
purposes and should not be connected, i.e. left
floating. Do not ground.
D1, D7, E3, F4,
W3, U7
DNC
NC
NONE
NONE
Not Connected. This pin is not bonded and may
be left floating or connected to any potential.
C7
Table 2-3. Power and Ground Balls
Ball No.
Name
Equivalent Circuit
Description
A2, A6, B6, C6,
D8, D9, E1, F1,
H4, N4, R1, T1,
U8, U9, W6, Y2,
Y6
Power Supply for the Analog circuitry. This supply
is tied to the ESD ring. Therefore, it must be
powered up before or with any other supply.
VA
NONE
G1, G3, G4, H2,
J3, K3, L3, M3,
N2, P1, P3, P4,
R3, R4
Power Supply for the Track-and-Hold and Clock
circuitry.
VTC
NONE
NONE
A11, A15, C18,
D11, D15, D17,
J17, J20, R17,
R20, T17, U11,
U15, U16, Y11,
Y15
VDR
Power Supply for the Output Drivers.
Power Supply for the Digital Encoder.
A8, B9, C8, V8,
W9, Y8
VE
NONE
NONE
Bias Voltage I-channel. This is an externally
decoupled bias voltage for the I-channel. Each pin
should individually be decoupled with a 100 nF
capacitor via a low resistance, low inductance
path to GND.
J4, K2
L2, M4
VbiasI
Bias Voltage Q-channel. This is an externally
decoupled bias voltage for the Q-channel. Each
pin should individually be decoupled with a 100 nF
capacitor via a low resistance, low inductance
path to GND.
VbiasQ
NONE
16
Device Information
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
Table 2-3. Power and Ground Balls (continued)
Ball No.
Name
Equivalent Circuit
Description
A1, A7, B2, B7,
D4, D5, E4, K1,
L1, T4, U4, U5,
W2, W7, Y1, Y7,
H8:N13
GND
NONE
Ground Return for the Analog circuitry.
F2, G2, H3, J2,
K4, L4, M2, N3,
P2, R2, T2, T3,
U1
Ground Return for the Track-and-Hold and Clock
circuitry.
GNDTC
NONE
A13, A17, A20,
D13, D16, E17,
F17, F20, M17,
M20, U13, U17,
V18, Y13, Y17,
Y20
GNDDR
GNDE
NONE
NONE
Ground Return for the Output Drivers.
Ground Return for the Digital Encoder.
A9, B8, C9, V9,
W8, Y9
Table 2-4. High-Speed Digital Outputs
Ball No.
Name
Equivalent Circuit
Description
VDR
Data Clock Output for the I- and Q-channel data
bus. These differential clock outputs are used to
latch the output data and, if used, should always
be terminated with a 100Ω differential resistor
placed as closely as possible to the differential
receiver. Delayed and non-delayed data outputs
are supplied synchronously to this signal. In 1:2
Demux Mode or Non-Demux Mode, this signal is
at ¼ or ½ the sampling clock rate, respectively.
DCLKI and DCLKQ are always in phase with each
other, unless one channel is powered down, and
do not require a pulse from DCLK_RST to
become synchronized.
-
+
-
K19/K20
L19/L20
DCLKI+/-
DCLKQ+/-
+
DR GND
VDR
Out-of-Range Output for the I- and Q-channel.
This differential output is asserted logic-high while
the over- or under-range condition exists, i.e. the
differential signal at each respective analog input
exceeds the full-scale value. Each OR result
refers to the current Data, with which it is clocked
out. If used, each of these outputs should always
be terminated with a 100Ω differential resistor
placed as closely as possible to the differential
receiver.
-
+
-
K17/K18
L17/L18
ORI+/-
ORQ+/-
+
DR GND
Copyright © 2011–2013, Texas Instruments Incorporated
Device Information
17
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
Table 2-4. High-Speed Digital Outputs (continued)
Ball No.
Name
Equivalent Circuit
Description
J18/J19
H19/H20
H17/H18
G19/G20
G17/G18
F18/F19
E19/E20
D19/D20
D18/E18
C19/C20
B19/B20
B18/C17
·
M18/M19
N19/N20
N17/N18
P19/P20
P17/P18
R18/R19
T19/T20
U19/U20
U18/T18
V19/V20
W19/W20
W18/V17
DI11+/-
DI10+/-
DI9+/-
DI8+/-
DI7+/-
DI6+/-
DI5+/-
DI4+/-
DI3+/-
DI2+/-
DI1+/-
DI0+/-
·
DQ11+/-
DQ10+/-
DQ9+/-
DQ8+/-
DQ7+/-
DQ6+/-
DQ5+/-
DQ4+/-
DQ3+/-
DQ2+/-
DQ1+/-
DQ0+/-
VDR
I- and Q-channel Digital Data Outputs. In Non-
Demux Mode, this LVDS data is transmitted at the
sampling clock rate. In Demux Mode, these
outputs provide ½ the data at ½ the sampling
clock rate, synchronized with the delayed data, i.e.
the other ½ of the data which was sampled one
clock cycle earlier. Compared with the DId and
DQd outputs, these outputs represent the later
time samples. If used, each of these outputs
should always be terminated with a 100Ω
differential resistor placed as closely as possible
to the differential receiver.
-
+
-
+
DR GND
A18/A19
B17/C16
A16/B16
B15/C15
C14/D14
A14/B14
B13/C13
C12/D12
A12/B12
B11/C11
C10/D10
A10/B10
·
Y18/Y19
W17/V16
Y16/W16
W15/V15
V14/U14
Y14/W14
W13/V13
V12/U12
Y12/W12
W11/V11
V10/U10
Y10/W10
DId11+/-
DId10+/-
DId9+/-
DId8+/-
DId7+/-
DId6+/-
DId5+/-
DId4+/-
DId3+/-
DId2+/-
DId1+/-
DId0+/-
·
DQd11+/-
DQd10+/-
DQd9+/-
DQd8+/-
DQd7+/-
DQd6+/-
DQd5+/-
DQd4+/-
DQd3+/-
DQd2+/-
DQd1+/-
DQd0+/-
VDR
Delayed I- and Q-channel Digital Data Outputs. In
Non-Demux Mode, these outputs are tri-stated. In
Demux Mode, these outputs provide ½ the data at
½ the sampling clock rate, synchronized with the
non-delayed data, i.e. the other ½ of the data
which was sampled one clock cycle later.
Compared with the DI and DQ outputs, these
outputs represent the earlier time samples. If
used, each of these outputs should always be
terminated with a 100Ω differential resistor placed
as closely as possible to the differential receiver.
-
+
-
+
DR GND
18
Device Information
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
3
Electrical Specifications
3.1 Absolute Maximum Ratings(1)(2)
Supply Voltage (VA, VTC, VDR, VE)
2.2V
Supply Difference
max(VA/TC/DR/E)- min(VA/TC/DR/E
)
0V to 100 mV
−0.15V to (VA + 0.15V)
-0.5V to 2.5V
Voltage on Any Input Pin (except VIN+/-)
VIN+/- Voltage Range
Ground Difference
max(GNDTC/DR/E) -min(GNDTC/DR/E
Input Current at Any Pin(3)
)
0V to 100 mV
±50 mA
ADC12D800/500RF Package Power Dissipation at TA ≤ 85°C(3)
3.45 W
ESD Susceptibility(4)
Human Body Model
Charged Device Model
Machine Model
2500V
1000V
250V
Storage Temperature
−65°C to +150°C
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. There is no specification of operation at the
Absolute Maximum Ratings. Operating Ratings indicate conditions for which the device is functional, but do not ensure specific
performance limits. For ensured specifications and test conditions, see the Electrical Characteristics. The ensured specifications apply
only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test
conditions.
(2) All voltages are measured with respect to GND = GNDTC = GNDDR = GNDE = 0V, unless otherwise specified.
(3) When the input voltage at any pin exceeds the power supply limits, i.e. less than GND or greater than VA, the current at that pin should
be limited to 50 mA. In addition, over-voltage at a pin must adhere to the maximum voltage limits. Simultaneous over-voltage at multiple
pins requires adherence to the maximum package power dissipation limits. These dissipation limits are calculated using JEDEC
JESD51-7 thermal model. Higher dissipation may be possible based on specific customer thermal situation and specified package
thermal resistances from junction to case.
(4) Human body model is 100 pF capacitor discharged through a 1.5 kΩ resistor. Machine model is 220 pF discharged through 0Ω.
Charged device model simulates a pin slowly acquiring charge (such as from a device sliding down the feeder in an automated
assembler) then rapidly being discharged.
3.2 Operating Ratings(1)(2)
ADC12D800/500RF Ambient Temperature Range (Standard JEDEC thermal model)
Junction Temperature Range
−40°C ≤ TA ≤ 85°C
TJ ≤ 135°C
Supply Voltage (VA, VTC, VE)
+1.8V to +2.0V
+1.8V to VA
Driver Supply Voltage (VDR
)
VIN+/- Voltage Range(3)
-0.4V to 2.4V (DC)
VIN+/- Differential Voltage(3)
1.0V (d.c.-coupled @ 100% duty cycle)
2.0V (d.c.-coupled @ 20% duty cycle)
2.8V (d.c.-coupled @ 10% duty cycle)
VIN+/- Current Range(3)
VIN+/- Power
±50 mA (a.c.-coupled)
15.3 dBm (maintaining common mode voltage,
a.c.-coupled)
17.1 dBm (not maintaining common-mode voltage,
a.c.-coupled)
Ground Difference
max(GNDTC/DR/E) -min(GNDTC/DR/E
)
0V
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. There is no specification of operation at the
Absolute Maximum Ratings. Operating Ratings indicate conditions for which the device is functional, but do not ensure specific
performance limits. For ensured specifications and test conditions, see the Electrical Characteristics. The ensured specifications apply
only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test
conditions.
(2) All voltages are measured with respect to GND = GNDTC = GNDDR = GNDE = 0V, unless otherwise specified.
(3) Proper common mode voltage must be maintained to ensure proper output codes, especially during input overdrive.
Copyright © 2011–2013, Texas Instruments Incorporated
Electrical Specifications
19
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
Operating Ratings(1)(2) (continued)
CLK+/- Voltage Range
0V to VA
0.4VP-P to 2.0VP-P
Differential CLK Amplitude
Common Mode Input Voltage
VCMO - 150 mV < VCMI < VCMO +150 mV
3.3 Package Thermal Resistance(1)(2)
Package
θJA
θJC1
θJC2
292-Ball BGA Thermally Enhanced Package
16°C/W
2.9°C/W
2.5°C/W
(1) Soldering process must comply with Texas Instrument's Reflow Temperature Profile specifications. Refer to www.ti.com/packaging. See
(Note 2).
(2) Reflow temperature profiles are different for lead-free and non-lead-free packages.
3.4 Converter Electrical Characteristics
Static Converter Characteristics
Unless otherwise specified, the following apply after calibration for VA = VDR = VTC = VE = +1.9V; I- and Q-channels, AC-
coupled, unused channel terminated to AC ground, FSR Pin = High; CL = 10 pF; Differential, AC coupled Sine Wave
Sampling Clock, fCLK = 800/500 MHz at 0.5 VP-P with 50% duty cycle (as specified); VBG = Floating; Non-Extended Control
Mode; Rext = Rtrim = 3300Ω ± 0.1%; Analog Signal Source Impedance = 100Ω Differential; Non-Demux Non-DES Mode;
Duty Cycle Stabilizer on. Boldface limits apply for TA = TMIN to TMAX. All other limits TA = 25°C, unless otherwise noted.
(1)(2)(3)
ADC12D800RF
ADC12D500RF
Units
(Limits)
Symbol
Parameter
Conditions
Typ
Lim
12
Typ
Lim
12
Resolution with No Missing Codes
bits
INL
Integral Non-Linearity
(Best fit)
1 MHz DC-coupled over-ranged
sine wave
±2.5
±0.4
±7.25
±0.95
±2.5
±0.4
±7.25 LSB (max)
±0.95 LSB (max)
DNL
Differential Non-Linearity
1 MHz DC-coupled over-ranged
sine wave
VOFF
Offset Error
5
5
LSB
mV
VOFF_ADJ
PFSE
Input Offset Adjustment Range
Positive Full-Scale Error
Negative Full-Scale Error
Out-of-Range Output Code(5)
Extended Control Mode
±45
±45
(4)
See
±30
±30
4095
0
±30
±30
4095
0
mV (max)
mV (max)
(4)
NFSE
See
(VIN+) − (VIN−) > + Full Scale
(VIN+) − (VIN−) < − Full Scale
(1) The analog inputs, labeled "I/O", are protected as shown below. Input voltage magnitudes beyond the Absolute Maximum Ratings may
damage this device.
V
A
TO INTERNAL
CIRCUITRY
I / O
GND
(2) To ensure accuracy, it is required that VA, VTC, VE and VDR be well-bypassed. Each supply pin must be decoupled with separate bypass
capacitors.
(3) Typical figures are at TA = 25°C, and represent most likely parametric norms. Test limits are specified to TI's AOQL (Average Outgoing
Quality Level).
(4) Calculation of Full-Scale Error for this device assumes that the actual reference voltage is exactly its nominal value. Full-Scale Error for
this device, therefore, is a combination of Full-Scale Error and Reference Voltage Error. See Figure 4-2. For relationship between Gain
Error and Full-Scale Error, see Specification Definitions for Gain Error.
(5) This parameter is ensured by design and is not tested in production.
20
Electrical Specifications
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
3.5 Converter Electrical Characteristics
Dynamic Converter Characteristics
(1)
ADC12D800RF
ADC12D500RF
Units
(Limits)
Symbol
Parameter
Conditions
Typ
Lim
Typ
Lim
Bandwidth
Non-DES Mode, DESCLKIQ Mode
-3dB(2)
2.7
3.1
3.5
4.0
2.7
3.1
3.5
4.0
GHz
GHz
GHz
GHz
-6dB
-9dB
-12dB
DESI, DESQ Mode
-3dB(2)
1.2
2.3
2.7
3.0
1.2
2.3
2.7
3.0
GHz
GHz
GHz
GHz
-6dB
-9dB
-12dB
DESIQ Mode
-3dB(2)
1.75
2.7
1.75
2.7
GHz
GHz
-6dB
Gain Flatness
Non-DES Mode
D.C. to Fs/2
D.C. to Fs
±0.1
±0.3
±0.5
±0.02
±0.3
±0.3
dB
dB
dB
D.C. to 3Fs/2
DESI, DESQ Mode
D.C. to Fs/2
D.C. to Fs
±0.7
±2.2
±3.4
±0.6
±1.0
±1.8
dB
dB
dB
D.C. to 3Fs/2
DESIQ Mode
D.C. to Fs/2
D.C. to Fs
±0.6
±1.1
±2.0
±0.3
±0.7
±1.1
dB
dB
dB
D.C. to 3Fs/2
DESCLKIQ Mode
D.C. to Fs/2
D.C. to Fs
±0.4
±0.7
±1.0
±0.2
±0.5
±0.7
dB
dB
dB
D.C. to 3Fs/2
CER
Code Error Rate
Error/Sam
ple
10-18
10-18
NPR
IMD3
Noise Power Ratio
DES Mode, fc,notch = Fs/4,
Notch width = 5% of Fs/2
50.4
50.7
dB
3rd order Intermodulation
Distortion
DES Mode
FIN = 2670MHz ± 2.5MHz @
‑13dBFS
-76
-63
-80
-67
-87
-71
-85
-69
-74
-61
-79
-66
-85
-69
-84
-68
dBFS
dBc
FIN = 2070MHz ± 2.5MHz @
‑13dBFS
dBFS
dBc
FIN = 2670MHz ± 2.5MHz @
‑16dBFS
dBFS
dBc
FIN = 2070MHz ± 2.5MHz @
‑16dBFS
dBFS
dBc
(1) This parameter is ensured by design and/or characterization and is not tested in production.
(2) The -3dB point is the traditional Full-Power Bandwidth (FPBW) specification. Although the insertion loss is approximately half at this
frequency, the dynamic performance of the ADC does not necessarily begin to degrade to a level below which it may be effectively used
in an application. The ADC may be used at input frequencies above the -3dB FPBW point, for example, into the 5th and 6th Nyquist
zones. Depending on system requirements, it is only necessary to compensate for the insertion loss.
Copyright © 2011–2013, Texas Instruments Incorporated
Electrical Specifications
21
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
Converter Electrical Characteristics
Dynamic Converter Characteristics (1) (continued)
ADC12D800RF
ADC12D500RF
Units
(Limits)
Symbol
Parameter
Noise Floor Density
Non-DES Mode(3)(4)(5)
Conditions
Typ
Lim
Typ
Lim
50Ω single-ended input
termination, DES Mode
-152.2
-151.2
-150.5
-149.6
dBm/Hz
dBFS/Hz
ENOB
SINAD
SNR
Effective Number of Bits
AIN = 125 MHz @ -0.5 dBFS
AIN = 248 MHz @ -0.5 dBFS
AIN = 498 MHz @ -0.5 dBFS
AIN = 998 MHz @ -0.5 dBFS
AIN = 1498 MHz @ -0.5 dBFS
AIN = 125 MHz @ -0.5 dBFS
AIN = 248 MHz @ -0.5 dBFS
AIN = 498 MHz @ -0.5 dBFS
AIN = 998 MHz @ -0.5 dBFS
AIN = 1498 MHz @ -0.5 dBFS
AIN = 125 MHz @ -0.5 dBFS
AIN = 248 MHz @ -0.5 dBFS
AIN = 498 MHz @ -0.5 dBFS
AIN = 998 MHz @ -0.5 dBFS
AIN = 1498 MHz @ -0.5 dBFS
AIN = 125 MHz @ -0.5 dBFS
AIN = 248 MHz @ -0.5 dBFS
AIN = 498 MHz @ -0.5 dBFS
AIN = 998 MHz @ -0.5 dBFS
AIN = 1498 MHz @ -0.5 dBFS
AIN = 125 MHz @ -0.5 dBFS
AIN = 248 MHz @ -0.5 dBFS
AIN = 498 MHz @ -0.5 dBFS
AIN = 998 MHz @ -0.5 dBFS
AIN = 1498 MHz @ -0.5 dBFS
AIN = 125 MHz @ -0.5 dBFS
AIN = 248 MHz @ -0.5 dBFS
AIN = 498 MHz @ -0.5 dBFS
AIN = 998 MHz @ -0.5 dBFS
AIN = 1498 MHz @ -0.5 dBFS
AIN = 125 MHz @ -0.5 dBFS
AIN = 248 MHz @ -0.5 dBFS
AIN = 498 MHz @ -0.5 dBFS
AIN = 998 MHz @ -0.5 dBFS
AIN = 1498 MHz @ -0.5 dBFS
9.6
9.5
9.1
9.7
9.7
9.1
bits (min)
bits
9.5
9.6
bits
9.2
9.3
bits
8.9
9.2
bits
Signal-to-Noise Plus Distortion
Ratio
59.7
58.7
58.8
57.1
55.1
60.2
59.8
59.7
58.4
56.4
-69.0
-65.1
-66.0
-63.2
-60.8
80.1
78.5
77.9
67.9
63.1
76.3
66.5
73.2
66.8
68.8
73.4
66.5
71.2
66.8
63.1
60.0
59.9
59.4
58.0
56.9
60.4
60.3
59.7
58.7
57.3
-71.4
-70.3
-70.4
-66.5
-67.4
80.5
77.0
85.7
81.0
76.5
77.6
73.8
74.4
68.5
70.3
74.3
73.8
72.0
68.5
70.5
dB
dB
dB
dB
dB
Signal-to-Noise Ratio
57.5
57.5
dB (min)
dB
dB
dB
dB
THD
Total Harmonic Distortion
Second Harmonic Distortion
Third Harmonic Distortion
Spurious-Free Dynamic Range
-62.5
-62.5
dB (max)
dB
dB
dB
dB
2nd Harm
3rd Harm
SFDR
dBc
dBc
dBc
dBc
dBc
dBc
dBc
dBc
dBc
dBc
dBc (min)
dBc
dBc
dBc
dBc
62.5
62.5
(3) The Dynamic Specifications are ensured for room to hot ambient temperature only (25°C to 85°C). Refer to the plots of the dynamic
performance vs. temperature in the Typical Performance Plots to see typical performance from cold to room temperature (-40°C to
25°C).
(4) The Fs/2 spur was removed from all the dynamic performance spectifications.
(5) Typical dynamic performance at Fin = 248 MHz, 498 MHz, 998 MHz, and 1498 MHz is ensured by design and/or characterization and is
not tested in production.
22
Electrical Specifications
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
Converter Electrical Characteristics
Dynamic Converter Characteristics (1) (continued)
ADC12D800RF
ADC12D500RF
Units
(Limits)
Symbol
Parameter
Conditions
Typ
Lim
Typ
Lim
DES Mode(1)(2)
ENOB
Effective Number of Bits
AIN = 125 MHz @ -0.5 dBFS
AIN = 248 MHz @ -0.5 dBFS
AIN = 498 MHz @ -0.5 dBFS
AIN = 998 MHz @ -0.5 dBFS
AIN = 1498 MHz @ -0.5 dBFS
AIN = 125 MHz @ -0.5 dBFS
AIN = 248 MHz @ -0.5 dBFS
AIN = 498 MHz @ -0.5 dBFS
AIN = 998 MHz @ -0.5 dBFS
AIN = 1498 MHz @ -0.5 dBFS
AIN = 125 MHz @ -0.5 dBFS
AIN = 248 MHz @ -0.5 dBFS
AIN = 498 MHz @ -0.5 dBFS
AIN = 998 MHz @ -0.5 dBFS
AIN = 1498 MHz @ -0.5 dBFS
AIN = 125 MHz @ -0.5 dBFS
AIN = 248 MHz @ -0.5 dBFS
AIN = 498 MHz @ -0.5 dBFS
AIN = 998 MHz @ -0.5 dBFS
AIN = 1498 MHz @ -0.5 dBFS
AIN = 125 MHz @ -0.5 dBFS
AIN = 248 MHz @ -0.5 dBFS
AIN = 498 MHz @ -0.5 dBFS
AIN = 998 MHz @ -0.5 dBFS
AIN = 1498 MHz @ -0.5 dBFS
AIN = 125 MHz @ -0.5 dBFS
AIN = 248 MHz @ -0.5 dBFS
AIN = 498 MHz @ -0.5 dBFS
AIN = 998 MHz @ -0.5 dBFS
AIN = 1498 MHz @ -0.5 dBFS
AIN = 125 MHz @ -0.5 dBFS
AIN = 248 MHz @ -0.5 dBFS
AIN = 498 MHz @ -0.5 dBFS
AIN = 998 MHz @ -0.5 dBFS
AIN = 1498 MHz @ -0.5 dBFS
9.4
9.3
9.6
9.5
bits
bits
bits
bits
bits
dB
9.3
9.5
9
9.2
8.7
8.7
SINAD
SNR
Signal-to-Noise Plus Distortion
Ratio
58.6
57.8
57.9
55.8
54.0
59.1
58.5
58.3
56.2
54.3
-68.3
-65.9
-68.5
-66.2
-65.3
80.3
83.2
80.5
80.2
71.8
72.5
68.8
76.1
68.1
73.2
71.9
67.6
68.8
66.2
63.9
59.6
59.0
59.0
57.3
53.5
60.0
59.6
59.4
58.1
53.8
-70.5
-67.8
-69.2
-64.5
-64.6
81.3
78.0
79.5
69.5
75.1
75.1
72.4
73.8
67.8
66.2
74.3
70.4
70.3
67.3
56.7
dB
dB
dB
dB
Signal-to-Noise Ratio
dB
dB
dB
dB
dB
THD
Total Harmonic Distortion
Second Harmonic Distortion
Third Harmonic Distortion
Spurious-Free Dynamic Range
dB
dB
dB
dB
dB
2nd Harm
3rd Harm
SFDR
dBc
dBc
dBc
dBc
dBc
dBc
dBc
dBc
dBc
dBc
dBc
dBc
dBc
dBc
dBc
(1) The Dynamic Specifications are ensured for room to hot ambient temperature only (25°C to 85°C). Refer to the plots of the dynamic
performance vs. temperature in the Typical Performance Plots to see typical performance from cold to room temperature (-40°C to
25°C).
(2) These measurements were taken in Extended Control Mode (ECM) with the DES Timing Adjust feature enabled (Addr: 7h). This feature
is used to reduce the interleaving timing spur amplitude, which occurs at Fs/2-Fin, and thereby increase the SFDR, SINAD and ENOB.
Copyright © 2011–2013, Texas Instruments Incorporated
Electrical Specifications
23
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
3.6 Converter Electrical Characteristics
Analog Input/Output and Reference Characteristics
ADC12D800RF
ADC12D500RF
Units
(Limits)
Symbol
Parameter
Conditions
Typ
Lim
Typ
Lim
Analog Inputs
VIN_FSR
Analog Differential Input Full Scale Non-Extended Control Mode
Range
FSR Pin Low
mVP-P
(min)
530
670
730
870
530
670
730
870
600
800
600
800
mVP-P
(max)
FSR Pin High
mVP-P
(min)
mVP-P
(max)
Extended Control Mode
FM(14:0) = 0000h
600
800
1000
0.02
1.6
600
800
1000
0.02
1.6
mVP-P
mVP-P
mVP-P
pF
FM(14:0) = 4000h (default)
FM(14:0) = 7FFFh
CIN
Analog Input Capacitance,
Non-DES Mode(1)
Differential
Each input pin to ground
Differential
pF
Analog Input Capacitance,
DES Mode(1)
0.08
2.2
0.08
2.2
pF
Each input pin to ground
pF
RIN
Differential Input Resistance
100
100
Ω
Common Mode Output
VCMO
Common Mode Output Voltage
ICMO = ±100 µA
1.15
1.35
1.15
1.35
V (min)
V (max)
1.25
1.25
(2)
TC_VCMO
VCMO_LVL
CL_VCMO
Common Mode Output Voltage
Temperature Coefficient
ICMO = ±100 µA
38
38
ppm/°C
VCMO input threshold to set
DC-coupling Mode
0.63
0.63
V
(1)
Maximum VCMO Load Capacitance See
80
80
pF
Bandgap Reference
VBG
Bandgap Reference Output
Voltage
IBG = ±100 µA
1.15
1.35
1.15
1.35
V (min)
V (max)
1.25
32
1.25
32
TC_VBG
CL_VBG
Bandgap Reference Voltage
Temperature Coefficient
IBG = ±100 µA(2)
ppm/°C
pF
(1)
Maximum Bandgap Reference
load Capacitance
See
80
80
(1) This parameter is ensured by design and is not tested in production.
(2) This parameter is ensured by design and/or characterization and is not tested in production.
24
Electrical Specifications
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
3.7 Converter Electrical Characteristics
I-Channel to Q-Channel Characteristics
ADC12D800RF
ADC12D500RF
Units
(Limits)
Symbol
Parameter
Conditions
Typ
Lim
Typ
Lim
(1)
Offset Match
See
2
2
LSB
LSB
Positive Full-Scale Match
Negative Full-Scale Match
Zero offset selected in
Control Register
2
2
Zero offset selected in
Control Register
fIN = 1.0 GHz(2)
2
2
LSB
Degree
dB
Phase Matching (I, Q)
< 1
-70
< 1
-70
X-TALK
Crosstalk from I-channel
Aggressor = 867 MHz F.S.
(Aggressor) to Q-channel (Victim) Victim = 100 MHz F.S.(1)
Crosstalk from Q-channel
(Aggressor) to I-channel (Victim)
Aggressor = 867 MHz F.S.
Victim = 100 MHz F.S.(1)
-70
-70
dB
(1) This parameter is ensured by design and/or characterization and is not tested in production.
(2) This parameter is ensured by design and is not tested in production.
3.8 Converter Electrical Characteristics
Sampling Clock Characteristics
ADC12D800RF
ADC12D500RF
Units
(Limits)
Symbol
VIN_CLK
Parameter
Conditions
Typ
Lim
0.4
2.0
0.4
2.0
Typ
Lim
0.4
2.0
0.4
2.0
Differential Sampling Clock Input
Level(1)
Sine Wave Clock
Differential Peak-to-Peak
VP-P (min)
VP-P (max)
VP-P (min)
VP-P (max)
pF
0.6
0.6
Square Wave Clock
Differential Peak-to-Peak
0.6
0.6
CIN_CLK
Sampling Clock Input
Capacitance(2)
Differential
0.1
1
0.1
1
Each input to ground
D.C.
pF
RIN_CLK
Sampling Clock Differential Input
Resistance
100
100
Ω
(1) This parameter is ensured by design and/or characterization and is not tested in production.
(2) This parameter is ensured by design and is not tested in production.
3.9 Converter Electrical Characteristics
AutoSync Feature Characteristics(1)
ADC12D800RF
ADC12D500RF
Units
(Limits)
Symbol
Parameter
Conditions
Typ
360
0.1
1
Lim
Typ
360
0.1
1
Lim
VIN_RCLK
Differential RCLK Input Level
RCLK Input Capacitance
Differential Peak-to-Peak
Differential
mVP-P
pF
CIN_RCLK
Each input to ground
pF
RIN_RCLK
IIH_RCLK
IIL_RCLK
RCLK Differential Input
Resistance
100
22
100
22
Ω
Input Leakage Current;
VIN = VA
µA
Input Leakage Current;
VIN = GND
-33
-33
µA
VO_RCOUT
Differential RCOut Output Voltage
360
360
mVP-P
(1) This feature functionality is not tested in production test; performance is tested in the specified/default mode only.
Copyright © 2011–2013, Texas Instruments Incorporated
Electrical Specifications
25
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
3.10 Converter Electrical Characteristics
Digital Control and Output Pin Characteristics
ADC12D800RF
Typ Lim
Digital Control Pins (DES, CalDly, CAL, PDI, PDQ, TPM, NDM, FSR, DDRPh, ECE, SCLK, SDI, SCS)
ADC12D500RF
Units
(Limits)
Symbol
Parameter
Conditions
Typ
Lim
VIH
VIL
IIH
Logic High Input Voltage
Logic Low Input Voltage
0.7×VA
0.3×VA
0.7×VA
0.3×VA
V (min)
V (max)
Input Leakage Current;
VIN = VA
0.02
0.02
μA
μA
IIL
Input Leakage Current;
VIN = GND
FSR, CalDly, CAL, NDM, TPM,
DDRPh, DES
-0.02
-0.02
SCS, SCLK, SDI
PDI, PDQ, ECE
-17
-38
-17
-38
μA
μA
Digital Output Pins (Data, DCLKI, DCLKQ, ORI, ORQ)
VOD
LVDS Differential Output Voltage
VBG = Floating, OVS = High
mVP-P
(min)
400
800
230
630
400
800
230
630
630
460
630
460
mVP-P
(max)
VBG = Floating, OVS = Low
mVP-P
(min)
mVP-P
(max)
VBG = VA, OVS = High(1)
VBG = VA, OVS = Low(1)
670
500
670
500
mVP-P
mVP-P
ΔVO DIFF
Change in LVDS Output Swing
Between Logic Levels
±1
±1
mV
VOS
Output Offset Voltage
VBG = Floating(1)
0.8
1.2
0.8
1.2
V
V
(1)
VBG = VA
(1)
ΔVOS
Output Offset Voltage Change
Between Logic Levels
See
±1
±1
mV
IOS
Output Short Circuit Current
VBG = Floating;
±4
±4
mA
Ω
D+ and D− connected to 0.8V(1)
(1)
ZO
Differential Output Impedance
Logic High Output Level
See
100
1.65
100
1.65
VOH
CalRun, IOH = −100 µA,
SDO, IOH = −400 µA(1)
V
VOL
Logic Low Output Level
CalRun, IOL = 100 µA,
SDO, IOL = 400 µA(1)
0.15
0.15
V
Differential DCLK Reset Pins (DCLK_RST)(2)
VCMI_DRST
VID_DRST
RIN_DRST
DCLK_RST Common Mode Input
Voltage
1.25
VIN_CLK
100
1.25
VIN_CLK
100
V
VP-P
Ω
Differential DCLK_RST Input
Voltage
(3)
Differential DCLK_RST Input
Resistance
See
(1) This parameter is ensured by design and/or characterization and is not tested in production.
(2) This feature functionality is not tested in production test; performance is tested in the specified/default mode only.
(3) This parameter is ensured by design and is not tested in production.
26
Electrical Specifications
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
3.11 Converter Electrical Characteristics
Power Supply Characteristics
ADC12D800RF
ADC12D500RF
Units
(Limits)
Symbol
Parameter
Conditions
Typ
755
422
422
2.4
343
213
213
560
161
90
Lim
Typ
589
340
340
2.4
295
184
184
560
148
81
Lim
IA
Analog Supply Current
PDI = PDQ = Low
mA
mA
mA
mA
mA
mA
mA
µA
PDI = Low; PDQ = High
PDI = High; PDQ = Low
PDI = PDQ = High
ITC
IDR
IE
Track-and-Hold and Clock Supply PDI = PDQ = Low
Current
PDI = Low; PDQ = High
PDI = High; PDQ = Low
PDI = PDQ = High
Output Driver Supply Current
Digital Encoder Supply Current
PDI = PDQ = Low
mA
mA
mA
µA
PDI = Low; PDQ = High
PDI = High; PDQ = Low
PDI = PDQ = High
90
81
4
4
PDI = PDQ = Low
55
30
mA
mA
mA
µA
PDI = Low; PDQ = High
PDI = High; PDQ = Low
PDI = PDQ = High
30
14
30
14
2.1
2.1
ITOTAL
Total Supply Current
Power Consumption
1:2 Demux Mode
PDI = PDQ = Low
1415
1314
1208
1062
mA
Non-Demux Mode
PDI = PDQ = Low
1670
3.17
1359
2.58
mA (max)
PC
Non-Demux Mode
PDI = PDQ = Low
2.50
1.43
1.43
5.6
2.02
1.18
1.18
5.6
W (max)
W
PDI = Low; PDQ = High
PDI = High; PDQ = Low
PDI = PDQ = High
1:2 Demux Mode
W
mW
PDI = PDQ = Low
2.69
2.30
W
3.12 Converter Electrical Characteristics
AC Electrical Characteristics
ADC12D800RF
ADC12D500RF
Units
(Limits)
Symbol
Parameter
Conditions
Typ
Lim
Typ
Lim
Sampling Clock (CLK)
fCLK (max)
Maximum Sampling Clock
Frequency
800
500
MHz
fCLK (min)
Minimum Sampling Clock
Frequency
Non-DES Mode(1)
DES Mode(1)
150
200
20
150
200
20
MHz
MHz
(1)
Sampling Clock Duty Cycle
fCLK(min) ≤ fCLK ≤ fCLK(max)
% (min)
% (max)
ps (min)
ps (min)
50
50
80
80
(1)
tCL
Sampling Clock Low Time
Sampling Clock High Time
See
See
625
625
250
250
1000
1000
400
400
(2)
tCH
(1) This parameter is ensured by design and/or characterization and is not tested in production.
(2) This parameter is ensured by design and is not tested in production.
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Electrical Specifications
27
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
Converter Electrical Characteristics
AC Electrical Characteristics (continued)
ADC12D800RF
ADC12D500RF
Units
(Limits)
Symbol
Parameter
Conditions
Typ
Lim
Typ
Lim
Data Clock (DCLKI, DCLKQ)
(1)
DCLK Duty Cycle
See
45
55
45
55
% (min)
% (max)
ps
50
50
(2)
(2)
tSR
Setup Time DCLK_RST±
see
45
45
45
45
tHR
Hold Time DCLK_RST±
Pulse Width DCLK_RST±
See
ps
tPWR
See(1)
Sampling
Clock
Cycles
(min)
5
5
tSYNC_DLY
DCLK Synchronization Delay
90° Mode(1)
0° Mode(1)
4
5
4
5
Sampling
Clock
Cycles
tLHT
tHLT
Differential Low-to-High Transition 10%-to-90%, CL = 2.5 pF(2)
Time
Differential High-to-Low Transition 10%-to-90%, CL = 2.5 pF(2)
Time
220
220
220
220
ps
ps
tSU
tH
Data-to-DCLK Setup Time
DCLK-to-Data Hold Time
DCLK-to-Data Output Skew
DDR 90° Mode(2)
DDR 90° Mode(2)
525
525
900
900
ps
ps
tOSK
50% of DCLK transition to 50% of
Data transition
±50
±50
ps
DDR 0° Mode, SDR Mode(2)
Data Input-to-Output
tAD
Aperture Delay
Sampling CLK+ Rise to
Acquisition of Data(2)
1.22
0.2
1.22
0.2
ns
ps (rms)
ns
(2)
tAJ
Aperture Jitter
See
tOD
Sampling Clock-to Data Output
Delay (in addition to Latency)
50% of Sampling Clock transition
to 50% of Data transition(2)
3.15
3.15
tLAT
Latency in 1:2 Demux Non-DES
Mode(1)
DI, DQ Outputs
DId, DQd Outputs
DI Outputs
17.5
18.5
17.5
18
17.5
18.5
17.5
18
Latency in 1:4 Demux DES
Mode(1)
DQ Outputs
Sampling
Clock
Cycles
DId Outputs
18.5
19
18.5
19
DQd Outputs
Latency in Non-Demux Non-DES DI Outputs
17
17
Mode(1)
DQ Outputs
17
17
Latency in Non-Demux DES
Mode(1)
DI Outputs
17
17
DQ Outputs
17.5
17.5
tORR
Over Range Recovery Time
Differential VIN step from ±1.2V to
0V to accurate conversion(1)
Sampling
Clock
1
1
Cycle
tWU
Wake-Up Time (PDI/PDQ low to
Rated Accuracy Conversion)
Non-DES Mode(1)
DES Mode(1)
500
1
500
1
ns
µs
(1) This parameter is ensured by design and is not tested in production.
(2) This parameter is ensured by design and/or characterization and is not tested in production.
28
Electrical Specifications
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
3.13 Converter Electrical Characteristics Serial Port Interface
ADC12D800RF
ADC12D500RF
Units
(Limits)
Symbol
fSCLK
Parameter
Conditions
Typ
Lim
Typ
Lim
(1)
Serial Clock Frequency
Serial Clock Low Time
Serial Clock High Time
See
15
15
MHz
30
30
30
30
ns (min)
ns (min)
(1)
(1)
tSSU
tSH
Serial Data-to-Serial Clock Rising See
Setup Time
2.5
1
2.5
1
ns (min)
ns (min)
ns
Serial Data-to-Serial Clock Rising See
Hold Time
tSCS
tHCS
tBSU
SCS-to-Serial Clock Rising Setup
Time
2.5
2.5
SCS-to-Serial Clock Falling Hold
Time
1.5
10
1.5
10
ns
ns
Bus turn-around time
(1) This parameter is ensured by design and is not tested in production.
3.14 Converter Electrical Characteristics Calibration
ADC12D800RF
ADC12D500RF
Units
(Limits)
Symbol
tCAL
Parameter
Conditions
Typ
Lim
Typ
Lim
(1)
Calibration Cycle Time
See
Sampling
Clock
2·107
2·107
Cycles
(1)
(1)
tCAL_L
tCAL_H
CAL Pin Low Time
CAL Pin High Time
See
See
640
640
223
640
640
223
Sampling
Clock
Cycles
(min)
tCalDly
Calibration delay determined by
CalDly Pin
CalDly = Low(1)
CalDly = High(1)
Sampling
Clock
Cycles
(max)
229
229
(1) This parameter is ensured by design and is not tested in production.
Copyright © 2011–2013, Texas Instruments Incorporated
Electrical Specifications
29
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
4
Specification Definitions
APERTURE (SAMPLING) DELAY is the amount of delay, measured from the sampling edge of the CLK
input, after which the signal present at the input pin is sampled inside the device.
APERTURE JITTER (tAJ) is the variation in aperture delay from sample-to-sample. Aperture jitter can be
effectively considered as noise at the input.
CODE ERROR RATE (CER) is the probability of error and is defined as the probable number of word
errors on the ADC output per unit of time divided by the number of words seen in that amount of time. A
CER of 10-18 corresponds to a statistical error in one word about every 31.7 years for the ADC12D800RF.
CLOCK DUTY CYCLE is the ratio of the time that the clock waveform is at a logic high to the total time of
one clock period.
DIFFERENTIAL NON-LINEARITY (DNL) is the measure of the maximum deviation from the ideal step
size of 1 LSB. It is measured at the relevant sample rate, fCLK, with fIN = 1MHz sine wave.
EFFECTIVE NUMBER OF BITS (ENOB, or EFFECTIVE BITS) is another method of specifying Signal-to-
Noise and Distortion Ratio, or SINAD. ENOB is defined as (SINAD − 1.76) / 6.02 and states that the
converter is equivalent to a perfect ADC of this many (ENOB) number of bits.
GAIN ERROR is the deviation from the ideal slope of the transfer function. It can be calculated from Offset
and Full-Scale Errors. The Positive Gain Error is the Offset Error minus the Positive Full-Scale Error. The
Negative Gain Error is the Negative Full-Scale Error minus the Offset Error. The Gain Error is the
Negative Full-Scale Error minus the Positive Full-Scale Error; it is also equal to the Positive Gain Error
plus the Negative Gain Error.
GAIN FLATNESS is a measure of the variation in gain over the specified bandwidth. For example, for the
ADC12D800RF, from D.C. to Fs/2 is to 400 MHz for the Non-DES Mode and from D.C to Fs/2 is to 800
MHz for the DES Mode.
INTEGRAL NON-LINEARITY (INL) is a measure of worst case deviation of the ADC transfer function
from an ideal straight line drawn through the ADC transfer function. The deviation of any given code from
this straight line is measured from the center of that code value step. The best fit method is used.
INSERTION LOSS is the loss in power of a signal due to the insertion of a device, e.g. the
ADC12D800/500RF, expressed in dB.
INTERMODULATION DISTORTION (IMD) is measure of the near-in 3rd order distortion products (2f2 - f1,
2f1 - f2) which occur when two tones which are close in frequency (f1, f2) are applied to the ADC input. It is
measured from the input tones power of the higher of the two distortion products (dBFS). The input tones
are typically -7dBFS.
LSB (LEAST SIGNIFICANT BIT) is the bit that has the smallest value or weight of all bits. This value is
VFS / 2N
where VFS is the differential full-scale amplitude VIN_FSR as set by the FSR input and "N" is the ADC
resolution in bits, which is 10 for the ADC12D800/500RF.
LOW VOLTAGE DIFFERENTIAL SIGNALING (LVDS) DIFFERENTIAL OUTPUT VOLTAGE (VID and
VOD) is two times the absolute value of the difference between the VD+ and VD- signals; each signal
measured with respect to Ground. VOD peak is VOD,P= (VD+ - VD-) and VOD peak-to-peak is VOD,P-P
=
2*(VD+ - VD-); for this product, the VOD is measured peak-to-peak.
30
Specification Definitions
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
V
D
+
V -
D
½×V
OD
V +
D
V
OS
V
-
D
GND
½×V = | V + - V - |
OD
D
D
Figure 4-1. LVDS Output Signal Levels
LVDS OUTPUT OFFSET VOLTAGE (VOS) is the midpoint between the D+ and D- pins output voltage
with respect to ground; i.e., [(VD+) +( VD-)]/2. See Figure 4-1.
MISSING CODES are those output codes that are skipped and will never appear at the ADC outputs.
These codes cannot be reached with any input value.
MSB (MOST SIGNIFICANT BIT) is the bit that has the largest value or weight. Its value is one half of full
scale.
NEGATIVE FULL-SCALE ERROR (NFSE) is a measure of how far the first code transition is from the
ideal 1/2 LSB above a differential −VIN/2 with the FSR pin low. For the ADC12D800/500RF the reference
voltage is assumed to be ideal, so this error is a combination of full-scale error and reference voltage
error.
NOISE FLOOR DENSITY is a measure of the power density of the noise floor, espressed in dBFS/Hz and
dBm/Hz. '0 dBFS' is defined as the power of a sinusoid which precisely uses the full-scale range of the
ADC.
NOISE POWER RATIO (NPR) is the ratio of the sum of the power inside the notched bins to the sum of
the power in an equal number of bins outside the notch, expressed in dB.
OFFSET ERROR (VOFF) is a measure of how far the mid-scale point is from the ideal zero voltage
differential input.
Offset Error = Actual Input causing average of 8k samples to result in an average code of 2047.5.
OUTPUT DELAY (tOD) is the time delay (in addition to Latency) after the rising edge of CLK+ before the
data update is present at the output pins.
OVER-RANGE RECOVERY TIME is the time required after the differential input voltages goes from ±1.2V
to 0V for the converter to recover and make a conversion with its rated accuracy.
PIPELINE DELAY (LATENCY) is the number of input clock cycles between initiation of conversion and
when that data is presented to the output driver stage. The data lags the conversion by the Latency plus
the tOD
.
POSITIVE FULL-SCALE ERROR (PFSE) is a measure of how far the last code transition is from the ideal
1-1/2 LSB below a differential +VIN/2. For the ADC12D800/500RF the reference voltage is assumed to be
ideal, so this error is a combination of full-scale error and reference voltage error.
SIGNAL TO NOISE RATIO (SNR) is the ratio, expressed in dB, of the rms value of the fundamental for a
single-tone to the rms value of the sum of all other spectral components below one-half the sampling
frequency, not including harmonics or DC.
SIGNAL TO NOISE PLUS DISTORTION (S/(N+D) or SINAD) is the ratio, expressed in dB, of the rms
value of the fundamental for a single-tone to the rms value of all of the other spectral components below
half the input clock frequency, including harmonics but excluding DC.
SPURIOUS-FREE DYNAMIC RANGE (SFDR) is the difference, expressed in dB, between the rms values
of the input signal at the output and the peak spurious signal, where a spurious signal is any signal
present in the output spectrum that is not present at the input, excluding DC.
Copyright © 2011–2013, Texas Instruments Incorporated
Specification Definitions
31
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
θJA is the thermal resistance between the junction to ambient.
θJC1 represents the thermal resistance between the die and the exposed metal area on the top of the
HSBGA package.
θJC2 represents the thermal resistance between the die and the center group of balls on the bottom of the
HSBGA package.
TOTAL HARMONIC DISTORTION (THD) is the ratio expressed in dB, of the rms total of the first nine
harmonic levels at the output to the level of the fundamental at the output. THD is calculated as
2
2
f10
A
+ . . . + A
f2
THD = 20 x log
2
A
f1
where Af1 is the RMS power of the fundamental (output) frequency and Af2 through Af10 are the RMS
power of the first 9 harmonic frequencies in the output spectrum.
•
Second Harmonic Distortion (2nd Harm) is the difference, expressed in dB, between the RMS
power in the input frequency seen at the output and the power in its 2nd harmonic level at the output.
•
Third Harmonic Distortion (3rd Harm) is the difference expressed in dB between the RMS power in
the input frequency seen at the output and the power in its 3rd harmonic level at the output.
4.1 Transfer Characteristic
IDEAL
POSITIVE
FULL-SCALE
TRANSITION
Output
Code
ACTUAL
POSITIVE
FULL-SCALE
TRANSITION
1111 1111 1111 (4095)
1111 1111 1110 (4094)
1111 1111 1101 (4093)
POSITIVE
FULL-SCALE
ERROR
MID-SCALE
TRANSITION
1000 0000 0000 (2048)
0111 1111 1111 (2047)
OFFSET
ERROR
IDEAL NEGATIVE
FULL-SCALE TRANSITION
ACTUAL NEGATIVE
FULL-SCALE TRANSITION
NEGATIVE
FULL-SCALE
ERROR
0000 0000 0010 (2)
0000 0000 0001 (1)
0000 0000 0000 (0)
(V +) < (V -)
IN IN
(V +) > (V -)
IN
IN
0.0V
Differential Analog Input Voltage (+V /2) - (-V /2)
-V /2
+V /2
IN
IN
IN
IN
Figure 4-2. Input / Output Transfer Characteristic
32
Specification Definitions
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
4.2 Timing Diagrams
Sample N
DI
Sample N-1
DId
V I+/-
IN
Sample N+1
t
AD
CLK+
t
OD
Sample N-22.5 and
Sample N-21.5
DId, DI
Sample N-20.5 and Sample N-19.5
Sample N-18.5 and Sample N-17.5
t
OSK
DCLKI+/-
(SDR Rising)
Figure 4-3. Clocking in 1:2 Demux Non-DES Mode*
Sample N
DQ
Sample N-1
DQ
V
Q+/-
IN
Sample N+1
t
AD
CLK+
DQ
t
OD
Sample N-17
OSK
Sample N-16
Sample N-20
Sample N-18
Sample N-19
t
DCLKQ+/-
(DDR 0°Phase)
t
H
t
SU
DCLKQ+/-
(DDR 90°Phase)
t
OSK
DCLKI+/-
(SDR Rising)
Figure 4-4. Clocking in Non-Demux Non-DES Mode*
Copyright © 2011–2013, Texas Instruments Incorporated
Specification Definitions
33
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
DQ
DI
c
c
DId
Sample N-1
Sample N
Sample N-0.5
DQd
c
c
V Q+/-
IN
Sample
N-1.5
Sample N+1
t
AD
c
c
CLK+/-
t
OD
DQd, DId,
DQ, DI
Sample N-23, N-22.5,
N-22, N-21.5
Sample N-21, N-20.5, N-20, N-19.5
Sample N-19, N-18.5, N-18, N-17.5
t
OSK
DCLKI+/-
(SDR Rising)
Figure 4-5. Clocking in 1:4 Demux DES Mode*
Sample N - 0.5
Sample N
Sample N-1
DI
DQ
DI
V
Q+/-
IN
Sample N + 0.5
DQ
Sample N+1
t
AD
CLK+
t
OD
Sample N-17.5, N-17
Sample N-16.5, N-16
Sample N-20.5, N-20
Sample N-19.5, N-19
DQ, DI
Sample N-18.5, N-18
t
OSK
DCLKQ+/-
(DDR 0°Phase)
t
t
SU
H
DCLKQ+/-
(DDR 90°Phase)
t
OSK
DCLKI+/-
(SDR Rising)
Figure 4-6. Clocking in Non-Demux Mode DES Mode*
NOTE
* The timing for these figures is shown for the one input only (I or Q). However, both I- and
Q-inputs may be used. For this case, the I-channel functions precisely the same as the Q-
channel, with VinI, DCLKI, DId and DI instead of VinQ, DCLKQ, DQd and DQ. Both I- and Q-
channel use the same CLK.
34
Specification Definitions
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
Synchronizing Edge
t
SYNC_DLY
CLK
t
HR
t
SR
DCLK_RST-
DCLK_RST+
t
OD
t
PWR
DCLKI+
DCLKQ+
Figure 4-7. Data Clock Reset Timing (Demux Mode)
t
CAL
t
CAL
CalRun
t
t
CAL_H
CalDly
Calibration Delay
determined by
CalDly (Pin V4)
CAL
t
CAL_L
POWER
SUPPLY
Figure 4-8. Power-on and On-Command Calibration Timing
Single Register Access
SCS
t
SCS
t
HCS
t
1
24
HCS
8
9
SCLK
SDI
Command Field
Data Field
Data Field
LSB
MSB
MSB
t
SH
t
SSU
t
BSU
SDO
ad mode)
High Z
High Z
LSB
Figure 4-9. Serial Interface Timing
Copyright © 2011–2013, Texas Instruments Incorporated
Specification Definitions
35
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
5
Typical Performance Plots
VA = VDR = VTC = VE = 1.9V, fCLK = 800 MHz / 500 MHz for the ADC12D800RF / ADC12D500RF, respectively, fIN = 498 MHz,
TA= 25°C, I-channel, Non-Demux Non-DES Mode, unless otherwise stated.
INL vs. CODE (ADC12D800RF)
INL vs. CODE (ADC12D500RF)
4
4
3
2
1
0
3
2
1
0
-1
-1
-2
-3
-4
-2
-3
-4
0
4095
0
4095
OUTPUT CODE
OUTPUT CODE
Figure 5-1.
Figure 5-2.
INL vs. TEMPERATURE (ADC12D800RF)
INL vs. TEMPERATURE (ADC12D500RF)
1.5
1.5
1.0
0.5
1.0
0.5
0.0
0.0
-0.5
-0.5
-1.0
-1.0
+INL
-INL
+INL
-INL
-1.5
-50
-1.5
-50
0
50
100
0
50
100
TEMPERATURE (°C)
TEMPERATURE (°C)
Figure 5-3.
Figure 5-4.
DNL vs. CODE (ADC12D800RF)
0.8
DNL vs. CODE (ADC12D500RF)
0.8
0.6
0.4
0.6
0.4
0.2
0.2
0.0
0.0
-0.2
-0.4
-0.6
-0.8
-0.2
-0.4
-0.6
-0.8
0
4095
0
4095
OUTPUT CODE
OUTPUT CODE
Figure 5-5.
Figure 5-6.
36
Typical Performance Plots
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
DNL vs. TEMPERATURE (ADC12D800RF)
DNL vs. TEMPERATURE (ADC12D500RF)
0.4
0.4
0.2
0.0
0.2
0.0
-0.2
-0.2
-0.4
+INL
-INL
+INL
-INL
-0.4
-50
0
50
100
-50
0
50
100
TEMPERATURE (°C)
TEMPERATURE (°C)
Figure 5-7.
Figure 5-8.
ENOB vs. TEMPERATURE (ADC12D800RF)
ENOB vs. TEMPERATURE (ADC12D500RF)
10
10
9
8
7
9
8
7
NON-DES MODE
DES MODE
NON-DES MODE
DES MODE
6
6
-50
0
50
100
-50
0
50
100
TEMPERATURE (°C)
TEMPERATURE (°C)
Figure 5-9.
Figure 5-10.
ENOB vs. SUPPLY VOLTAGE (ADC12D800RF)
ENOB vs. SUPPLY VOLTAGE (ADC12D500RF)
10
10
9
8
7
9
8
7
NON-DES MODE
DES MODE
NON-DES MODE
DES MODE
6
6
1.8
1.9
2.0
V (V)
2.1
2.2
1.8
1.9
2.0
V (V)
2.1
2.2
A
A
Figure 5-11.
Figure 5-12.
Copyright © 2011–2013, Texas Instruments Incorporated
Typical Performance Plots
37
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
ENOB vs. CLOCK FREQUENCY (ADC12D800RF)
ENOB vs. CLOCK FREQUENCY (ADC12D500RF)
10
10
9
8
7
9
8
7
NON-DES MODE
DES MODE
NON-DES MODE
DES MODE
6
6
0
200
400
600
800
0
100
200
300
400
500
CLOCK FREQUENCY (MHz)
CLOCK FREQUENCY (MHz)
Figure 5-13.
Figure 5-14.
ENOB vs. INPUT FREQUENCY (ADC12D800RF)
ENOB vs. INPUT FREQUENCY (ADC12D500RF)
10
10
9
8
7
9
8
7
NON-DES MODE
DES MODE
NON-DES MODE
DES MODE
6
6
0
750
1500
2250
3000
0
750
1500
2250
3000
INPUT FREQUENCY (MHz)
INPUT FREQUENCY (MHz)
Figure 5-15.
Figure 5-16.
ENOB vs. VCMI (ADC12D800RF)
10
ENOB vs. VCMI (ADC12D500RF)
10
9
8
7
6
9
8
7
6
NON-DES MODE
DES MODE
NON-DES MODE
DES MODE
0.50 0.75 1.00 1.25 1.50 1.75 2.00
(V)
0.50 0.75 1.00 1.25 1.50 1.75 2.00
(V)
V
V
CMI
CMI
Figure 5-17.
Figure 5-18.
38
Typical Performance Plots
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
SNR vs. TEMPERATURE (ADC12D800RF)
SNR vs. TEMPERATURE (ADC12D500RF)
65
65
60
55
50
45
40
60
55
50
45
NON-DES MODE
DES MODE
NON-DES MODE
DES MODE
40
-50
0
50
100
-50
0
50
100
TEMPERATURE (°C)
TEMPERATURE (°C)
Figure 5-19.
Figure 5-20.
SNR vs. SUPPLY VOLTAGE (ADC12D800RF)
SNR vs. SUPPLY VOLTAGE (ADC12D500RF)
65
65
60
55
50
60
55
50
NON-DES MODE
DES MODE
NON-DES MODE
DES MODE
45
45
1.8
1.9
2.0
V (V)
2.1
2.2
1.8
1.9
2.0
V (V)
2.1
2.2
A
A
Figure 5-21.
Figure 5-22.
SNR vs. CLOCK FREQUENCY (ADC12D800RF)
SNR vs. CLOCK FREQUENCY (ADC12D500RF)
65
65
60
55
50
60
55
50
45
45
NON-DES MODE
DES MODE
NON-DES MODE
DES MODE
40
40
0
200
400
600
800
0
100
200
300
400
500
CLOCK FREQUENCY (MHz)
CLOCK FREQUENCY (MHz)
Figure 5-23.
Figure 5-24.
Copyright © 2011–2013, Texas Instruments Incorporated
Typical Performance Plots
39
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
SNR vs. INPUT FREQUENCY (ADC12D800RF)
SNR vs. INPUT FREQUENCY (ADC12D500RF)
65
65
60
55
50
45
60
55
50
45
NON-DES MODE
DES MODE
NON-DES MODE
DES MODE
40
0
1000
2000
3000
0
1000
2000
3000
INPUT FREQUENCY (MHz)
INPUT FREQUENCY (MHz)
Figure 5-25.
Figure 5-26.
THD vs. TEMPERATURE (ADC12D800RF)
THD vs. TEMPERATURE (ADC12D500RF)
-40
-40
-50
-60
-70
-50
-60
-70
NON-DES MODE
DES MODE
NON-DES MODE
DES MODE
-80
-80
-50
0
50
100
-50
0
50
100
TEMPERATURE (°C)
TEMPERATURE (°C)
Figure 5-27.
Figure 5-28.
THD vs. SUPPLY VOLTAGE (ADC12D800RF)
THD vs. SUPPLY VOLTAGE (ADC12D500RF)
-40
-40
-50
-60
-70
-50
-60
-70
NON-DES MODE
DES MODE
NON-DES MODE
DES MODE
-80
-80
1.8
1.9
2.0
V (V)
2.1
2.2
1.8
1.9
2.0
V (V)
2.1
2.2
A
A
Figure 5-29.
Figure 5-30.
40
Typical Performance Plots
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
THD vs. CLOCK FREQUENCY (ADC12D800RF)
THD vs. CLOCK FREQUENCY (ADC12D500RF)
-40
-50
-60
-70
-80
-40
-50
-60
-70
NON-DES MODE
DES-MODE
NON-DES MODE
DES-MODE
-80
0
200
400
600
800
0
100
200
300
400
500
CLOCK FREQUENCY (MHz)
CLOCK FREQUENCY (MHz)
Figure 5-31.
Figure 5-32.
THD vs. INPUT FREQUENCY (ADC12D800RF)
THD vs. INPUT FREQUENCY (ADC12D500RF)
-40
-40
-50
-60
-70
-50
-60
-70
NON-DES MODE
DES MODE
NON-DES MODE
DES MODE
-80
-80
0
1000
2000
3000
0
1000
2000
3000
INPUT FREQUENCY (MHz)
INPUT FREQUENCY (MHz)
Figure 5-33.
Figure 5-34.
SFDR vs. TEMPERATURE (ADC12D800RF)
SFDR vs. TEMPERATURE (ADC12D500RF)
80
80
70
60
50
70
60
50
NON-DES MODE
DES MODE
NON-DES MODE
DES MODE
40
40
-50
0
50
100
-50
0
50
100
TEMPERATURE (°C)
TEMPERATURE (°C)
Figure 5-35.
Figure 5-36.
Copyright © 2011–2013, Texas Instruments Incorporated
Typical Performance Plots
41
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
SFDR vs. SUPPLY VOLTAGE (ADC12D800RF)
SFDR vs. SUPPLY VOLTAGE (ADC12D500RF)
80
80
70
60
50
40
70
60
50
NON-DES MODE
DES MODE
NON-DES MODE
DES MODE
40
1.8
1.9
2.0
V (V)
2.1
2.2
1.8
1.9
2.0
V (V)
2.1
2.2
A
A
Figure 5-37.
Figure 5-38.
SFDR vs. CLOCK FREQUENCY (ADC12D800RF)
SFDR vs. CLOCK FREQUENCY (ADC12D500RF)
80
80
70
60
50
70
60
50
NON-DES MODE
DES MODE
NON-DES MODE
DES MODE
40
40
0
200
400
600
800
0
100
200
300
400
500
CLOCK FREQUENCY (MHz)
CLOCK FREQUENCY (MHz)
Figure 5-39.
Figure 5-40.
SFDR vs. INPUT FREQUENCY (ADC12D800RF)
SFDR vs. INPUT FREQUENCY (ADC12D500RF)
80
80
70
60
50
70
60
50
NON-DES MODE
DES MODE
NON-DES MODE
DES MODE
40
40
0
1000
2000
3000
0
1000
2000
3000
INPUT FREQUENCY (MHz)
INPUT FREQUENCY (MHz)
Figure 5-41.
Figure 5-42.
42
Typical Performance Plots
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
SPECTRAL RESPONSE AT FIN = 498 MHz (ADC12D800RF)
SPECTRAL RESPONSE AT FIN = 498 MHz (ADC12D500RF)
0
-20
-40
-60
-80
-100
0
NON-DES MODE
NON-DES MODE
-20
-40
-60
-80
-100
0
100
200
300
400
0
50
100
150
200
250
FREQUENCY (MHz)
FREQUENCY (MHz)
Figure 5-43.
Figure 5-44.
SPECTRAL RESPONSE AT FIN = 498 MHz (ADC12D800RF)
SPECTRAL RESPONSE AT FIN = 498 MHz (ADC12D500RF)
0
0
DES MODE
DES MODE
-20
-40
-20
-40
-60
-60
-80
-80
-100
-100
0
200
400
600
800
0
100
200
300
400
500
FREQUENCY (MHz)
FREQUENCY (MHz)
Figure 5-45.
Figure 5-46.
CROSSTALK vs. SOURCE FREQUENCY (ADC12D800RF)
CROSSTALK vs. SOURCE FREQUENCY (ADC12D500RF)
-40
-40
NON-DES MODE
NON-DES MODE
-50
-60
-50
-60
-70
-70
-80
-80
-90
-90
-100
-100
0
1000
2000
3000
0
1000
2000
3000
AGGRESSOR INPUT FREQUENCY (MHz)
AGGRESSOR INPUT FREQUENCY (MHz)
Figure 5-47.
Figure 5-48.
Copyright © 2011–2013, Texas Instruments Incorporated
Typical Performance Plots
43
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
INSERTION LOSS (ADC12D800RF)
INSERTION LOSS (ADC12D500RF)
0
0
-3
-3
-6
-6
-9
-9
NON-DES
DESI
NON-DES
-12
-15
-12
DESI
DESIQ
DESIQ
DESCLKIQ
DESCLKIQ
-15
0
1000
2000
3000
0
1000
2000
3000
INPUT FREQUENCY (MHz)
INPUT FREQUENCY (MHz)
Figure 5-49.
Figure 5-50.
POWER CONSUMPTION vs. CLOCK FREQUENCY
(ADC12D800RF)
POWER CONSUMPTION vs. CLOCK FREQUENCY
(ADC12D500RF)
3.0
2.5
2.0
1.5
3.0
2.5
2.0
1.5
DEMUX
NON-DEMUX
DEMUX
NON-DEMUX
1.0
1.0
0
200
400
600
800
0
100
200
300
400
500
CLOCK FREQUENCY (MHz)
CLOCK FREQUENCY (MHz)
Figure 5-51.
Figure 5-52.
NPR vs. RMS NOISE LOADING LEVEL (ADC12D800RF)
NPR vs. RMS NOISE LOADING LEVEL (ADC12D500RF)
60
60
50
40
30
50
40
30
NON-DES
DES
NON-DES
DES
20
20
-40
-30
-20
-10
0
-40
-30
-20
-10
0
V
RMS
LOADING LEVEL (dB)
V LOADING LEVEL (dB)
RMS
Figure 5-54.
Figure 5-53.
44
Typical Performance Plots
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
NPR SPECTRAL RESPONSE (ADC12D800RF)
NPR SPECTRAL RESPONSE (ADC12D500RF)
0
-20
-40
-60
-80
-100
0
-20
-40
-60
-80
-100
DES MODE
DES MODE
0
200
400
600
800
0
100
200
300
400
500
FREQUENCY (MHz)
FREQUENCY (MHz)
Figure 5-55.
Figure 5-56.
Copyright © 2011–2013, Texas Instruments Incorporated
Typical Performance Plots
45
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
6
Functional Description
The ADC12D800/500RF is a versatile A/D converter with an innovative architecture which permits very
high speed operation. The controls available ease the application of the device to circuit solutions.
Optimum performance requires adherence to the provisions discussed here and in the Applications
Information Section. This section covers an overview, a description of control modes (Extended Control
Mode and Non-Extended Control Mode), and features.
6.1 Overview
The ADC12D800/500RF uses a calibrated folding and interpolating architecture that achieves a high
Effective Number of Bits (ENOB). The use of folding amplifiers greatly reduces the number of comparators
and power consumption. Interpolation reduces the number of front-end amplifiers required, minimizing the
load on the input signal and further reducing power requirements. In addition to correcting other non-
idealities, on-chip calibration reduces the INL bow often seen with folding architectures. The result is an
extremely fast, high performance, low power converter.
The analog input signal (which is within the converter's input voltage range) is digitized to twelve bits at
speeds of 200/200 MSPS to 1.6/1.0 GSPS, typical. Differential input voltages below negative full-scale will
cause the output word to consist of all zeroes. Differential input voltages above positive full-scale will
cause the output word to consist of all ones. Either of these conditions at the I- or Q-input will cause the
Out-of-Range I-channel or Q-channel output (ORI or ORQ), respectively, to output a logic-high signal.
In ECM, an expanded feature set is available via the Serial Interface. The ADC12D800/500RF builds upon
previous architectures, introducing a new DES Mode timing adjust feature, AutoSync feature for multi-chip
synchronization and increasing to 15-bit for gain and 12-bit plus sign for offset the independent
programmable adjustment for each channel.
Each channel has a selectable output demultiplexer which feeds two LVDS buses. If the 1:2 Demux Mode
is selected, the output data rate is reduced to half the input sample rate on each bus. When Non-Demux
Mode is selected, the output data rate on each channel is at the same rate as the input sample clock and
only one 12-bit bus per channel is active.
6.2 Control modes
The ADC12D800/500RF may be operated in one of two control modes: Non-extended Control Mode (Non-
ECM) or Extended Control Mode (ECM). In the simpler Non-ECM (also sometimes referred to as Pin
Control Mode), the user affects available configuration and control of the device through the control pins.
The ECM provides additional configuration and control options through a serial interface and a set of 16
registers, most of which are available to the customer.
6.2.1 Non-Extended Control Mode
In Non-extended Control Mode (Non-ECM), the Serial Interface is not active and all available functions are
controlled via various pin settings. Non-ECM is selected by setting the ECE Pin to logic-high. Note that, for
the control pins, "logic-high" and "logic-low" refer to VA and GND, respectively. Nine dedicated control pins
provide a wide range of control for the ADC12D800/500RF and facilitate its operation. These control pins
provide DES Mode selection, Demux Mode selection, DDR Phase selection, execute Calibration,
Calibration Delay setting, Power Down I-channel, Power Down Q-channel, Test Pattern Mode selection,
and Full-Scale Input Range selection. In addition to this, two dual-purpose control pins provide for AC/DC-
coupled Mode selection and LVDS output common-mode voltage selection. See Table 6-1 for a summary.
46
Functional Description
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
Table 6-1. Non-ECM Pin Summary
Pin Name
Logic-Low
Logic-High
Floating
Dedicated Control Pins
DES
Mode
DES
Non-DES Mode
Not valid
Not valid
Demux
Mode
NDM
Non-Demux Mode
DDRPh
CAL
0° Mode / Falling Mode
90° Mode / Rising Mode
Not valid
Not valid
Not valid
See Calibration Pin (CAL)
CalDly
Shorter delay
Longer delay
Power Down
I-channel
Power Down
I-channel
PDI
I-channel active
Power Down
Q-channel
Power Down
Q-channel
PDQ
Q-channel active
TPM
Non-Test Pattern Mode
Lower FS input Range
Test Pattern Mode
Not valid
Not valid
FSR
Dual-purpose Control Pins
VCMO
Higher FS input Range
AC-coupled operation
Not allowed
Not allowed
DC-coupled operation
Higher LVDS common-mode
voltage
Lower LVDS common-mode
voltage
VBG
6.2.1.1 Dual Edge Sampling Pin (DES)
The Dual Edge Sampling (DES) Pin selects whether the ADC12D800/500RF is in DES Mode (logic-high)
or Non-DES Mode (logic-low). DES Mode means that a single analog input is sampled by both I- and Q-
channels in a time-interleaved manner. One of the ADCs samples the input signal on the rising sampling
clock edge (duty cycle corrected); the other ADC samples the input signal on the falling sampling clock
edge (duty cycle corrected). In Non-ECM, only the I-input may be used for DES Mode, a.k.a. DESI Mode.
In ECM, the Q-input may be selected via the DEQ Bit (Addr: 0h, Bit: 6), a.k.a. DESQ Mode. In ECM, both
the I- and Q-inputs may be selected, a.k.a. DESIQ Mode.
To use this feature in ECM, use the DES bit in the Configuration Register (Addr: 0h; Bit: 7). See
DES/Non-DES Mode for more information.
6.2.1.2 Non-Demultiplexed Mode Pin (NDM)
The Non-Demultiplexed Mode (NDM) Pin selects whether the ADC12D800/500RF is in Demux Mode
(logic-low) or Non-Demux Mode (logic-high). In Non-Demux Mode, the data from the input is produced at
the sampled rate at a single 12-bit output bus. In Demux Mode, the data from the input is produced at half
the sampled rate at twice the number of output buses. For Non-DES Mode, each I- or Q-channel will
produce its data on one or two buses for Non-Demux or Demux Mode, respectively. For DES Mode, the
selected channel will produce its data on two or four buses for Non-Demux or Demux Mode, respectively.
If Non-Demux Mode is selected, the default is DDR Mode. If Demux Mode is selected, the default is SDR
Mode.
This feature is pin-controlled only and remains active during both Non-ECM and ECM. See Demux/Non-
demux Mode for more information.
6.2.1.3 Dual Data Rate Phase Pin (DDRPh)
The Dual Data Rate Phase (DDRPh) Pin selects whether the ADC12D800/500RF is in 0° Mode (logic-low)
or 90° Mode (logic-high) for DDR Mode. If the device is in SDR Mode, then the DDRPh Pin selects
whether the ADC12D800/500RF is in Falling Mode (logic-low) or Rising Mode (logic-high). For DDR Mode,
the Data may transition either with the DCLK transition (0° Mode) or halfway between DCLK transitions
(90° Mode). The DDRPh Pin selects the mode for both the I-channel: DI- and DId-to-DCLKI phase
relationship and for the Q-channel: DQ- and DQd-to-DCLKQ phase relationship.
Copyright © 2011–2013, Texas Instruments Incorporated
Functional Description
47
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
To use this feature in ECM, use the DPS bit in the Configuration Register (Addr: 0h; Bit: 14). See SDR /
DDR Clock for more information.
6.2.1.4 Calibration Pin (CAL)
The Calibration (CAL) Pin may be used to execute an on-command calibration or to disable the power-on
calibration. The effect of calibration is to maximize the dynamic performance. To initiate an on-command
calibration via the CAL pin, bring the CAL pin high for a minimum of tCAL_H input clock cycles after it has
been low for a minimum of tCAL_L input clock cycles. Holding the CAL pin high upon power-on will prevent
execution of the power-on calibration. In ECM, this pin remains active and is logically OR'd with the CAL
bit.
To use this feature in ECM, use the CAL bit in the Configuration Register (Addr: 0h; Bit: 15). See
Calibration Feature for more information.
6.2.1.5 Calibration Delay Pin (CalDly)
The Calibration Delay (CalDly) Pin selects whether a shorter or longer delay time is present, after the
application of power, until the start of the power-on calibration. The actual delay time is specified as tCalDly
and may be found in Converter Electrical Characteristics Calibration. This feature is pin-controlled only
and remains active in ECM. It is recommended to select the desired delay time prior to power-on and not
dynamically alter this selection.
See Calibration Feature for more information.
6.2.1.6 Power Down I-channel Pin (PDI)
The Power Down I-channel (PDI) Pin selects whether the I-channel is powered down (logic-high) or active
(logic-low). The digital data output pins, DI and DId, (both positive and negative) are put into a high
impedance state when the I-channel is powered down. Upon return to the active state, the pipeline will
contain meaningless information and must be flushed. The supply currents (typicals and limits) are
available for the I-channel powered down or active and may be found in Converter Electrical
Characteristics Power Supply Characteristics. The device should be recalibrated following a power-cycle
of PDI (or PDQ).
This pin remains active in ECM. In ECM, either this pin or the PDI bit (Addr: 0h; Bit: 11) in the Control
Register may be used to power-down the I-channel. See Power Down for more information.
6.2.1.7 Power Down Q-channel Pin (PDQ)
The Power Down Q-channel (PDQ) Pin selects whether the Q-channel is powered down (logic-high) or
active (logic-low). This pin functions similarly to the PDI pin, except that it applies to the Q-channel. The
PDI and PDQ pins function independently of each other to control whether each I- or Q-channel is
powered down or active.
This pin remains active in ECM. In ECM, either this pin or the PDQ bit (Addr: 0h; Bit: 10) in the Control
Register may be used to power-down the Q-channel. See Power Down for more information.
6.2.1.8 Test Pattern Mode Pin (TPM)
The Test Pattern Mode (TPM) Pin selects whether the output of the ADC12D800/500RF is a test pattern
(logic-high) or the converted analog input (logic-low). The ADC12D800/500RF can provide a test pattern
at the four output buses independently of the input signal to aid in system debug. In TPM, the ADC is
disengaged and a test pattern generator is connected to the outputs, including ORI and ORQ. See Test
Pattern Mode for more information.
48
Functional Description
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
6.2.1.9 Full-Scale Input Range Pin (FSR)
The Full-Scale Input Range (FSR) Pin selects whether the full-scale input range for both the I- and Q-
channel is higher (logic-high) or lower (logic-low). The input full-scale range is specified as VIN_FSR in
Converter Electrical Characteristics Analog Input/Output and Reference Characteristics. In Non-ECM, the
full-scale input range for each I- and Q-channel may not be set independently, but it is possible to do so in
ECM. The device must be calibrated following a change in FSR to obtain optimal performance.
To use this feature in ECM, use the Configuration Registers (Addr: 3h and Bh). See Input Control and
Adjust for more information.
6.2.1.10 AC/DC-Coupled Mode Pin (VCMO
)
The VCMO Pin serves a dual purpose. When functioning as an output, it provides the optimal common-
mode voltage for the DC-coupled analog inputs. When functioning as an input, it selects whether the
device is AC-coupled (logic-low) or DC-coupled (floating). This pin is always active, in both ECM and Non-
ECM.
6.2.1.11 LVDS Output Common-mode Pin (VBG
)
The VBG Pin serves a dual purpose. When functioning as an output, it provides the bandgap reference.
When functioning as an input, it selects whether the LVDS output common-mode voltage is higher (logic-
high) or lower (floating). The LVDS output common-mode voltage is specified as VOS and may be found in
Converter Electrical Characteristics Digital Control and Output Pin Characteristics. This pin is always
active, in both ECM and Non-ECM.
6.2.2 Extended Control Mode
In Extended Control Mode (ECM), most functions are controlled via the Serial Interface. In addition to this,
several of the control pins remain active. See Table 6-4 for details. ECM is selected by setting the ECE
Pin to logic-low. If the ECE Pin is set to logic-high (Non-ECM), then the registers are reset to their default
values. So, a simple way to reset the registers is by toggling the ECE pin. Four pins on the
ADC12D800/500RF control the Serial Interface: SCS, SCLK, SDI and SDO. This section covers the Serial
Interface. The Register Definitions are located at the end of the datasheet so that they are easy to find,
see Register Definitions.
6.2.2.1 The Serial Interface
The ADC12D800/500RF offers a Serial Interface that allows access to the sixteen control registers within
the device. The Serial Interface is a generic 4-wire (optionally 3-wire) synchronous interface that is
compatible with SPI type interfaces that are used on many micro-controllers and DSP controllers. Each
serial interface access cycle is exactly 24 bits long. A register-read or register-write can be accomplished
in one cycle. The signals are defined in such a way that the user can opt to simply join SDI and SDO
signals in his system to accomplish a single, bidirectional SDI/O signal. A summary of the pins for this
interface may be found in Table 6-2. See Figure 4-9 for the timing diagram and Converter Electrical
Characteristics Serial Port Interface for timing specification details. Control register contents are retained
when the device is put into power-down mode. If this feature is unused, the SCLK, SDI, and SCS pins
may be left floating because they each have an internal pull-up.
Table 6-2. Serial Interface Pins
Pin
C4
C5
B4
A3
Name
SCS (Serial Chip Select bar)
SCLK (Serial Clock)
SDI (Serial Data In)
SDO (Serial Data Out)
Copyright © 2011–2013, Texas Instruments Incorporated
Functional Description
49
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
SCS: Each assertion (logic-low) of this signal starts a new register access, i.e. the SDI command field
must be ready on the following SCLK rising edge. The user is required to de-assert this signal after the
24th clock. If the SCS is de-asserted before the 24th clock, no data read/write will occur. For a read
operation, if the SCS is asserted longer than 24 clocks, the SDO output will hold the D0 bit until SCS is
de-asserted. For a write operation, if the SCS is asserted longer than 24 clocks, data write will occur
normally through the SDI input upon the 24th clock. Setup and hold times, tSCS and tHCS, with respect to
the SCLK must be observed. SCS must be toggled in between register access cycles.
SCLK: This signal is used to register the input data (SDI) on the rising edge; and to source the output
data (SDO) on the falling edge. The user may disable the clock and hold it at logic-low. There is no
minimum frequency requirement for SCLK; see fSCLK in Converter Electrical Characteristics Serial Port
Interface for more details.
SDI: Each register access requires a specific 24-bit pattern at this input, consisting of a command field
and a data field. If the SDI and SDO wires are shared (3-wire mode), then during read operations, it is
necessary to tri-state the master which is driving SDI while the data field is being output by the ADC on
SDO. The master must be tri-stated before the falling edge of the 8th clock. If SDI and SDO are not shared
(4-wire mode), then this is not necessary. Setup and hold times, tSH and tSSU, with respect to the SCLK
must be observed.
SDO: This output is normally tri-stated and is driven only when SCS is asserted, the first 8 bits of
command data have been received and it is a READ operation. The data is shifted out, MSB first, starting
with the 8th clock's falling edge. At the end of the access, when SCS is de-asserted, this output is tri-
stated once again. If an invalid address is accessed, the data sourced will consist of all zeroes. If it is a
read operation, there will be a bus turnaround time, tBSU, from when the last bit of the command field was
read in until the first bit of the data field is written out.
Table 6-3 shows the Serial Interface bit definitions.
Table 6-3. Command and Data Field Definitions
Bit No.
1
Name
Read/Write (R/W)
Reserved
A<3:0>
Comments
1b indicates a read operation
0b indicates a write operation
2-3
4-7
8
Bits must be set to 10b
16 registers may be addressed. The order is
MSB first
X
This is a "don't care" bit
Data written to or read from addressed
register
9-24
D<15:0>
50
Functional Description
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
The serial data protocol is shown for a read and write operation in Figure 6-1 and Figure 6-2, respectively.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
SCSb
SCLK
*Only required to be tri-stated in 3-wire mode.
1
0
A3
A2
A1
A0
X
SDI
R/W
SDO
D15 D14 D13 D12 D11 D10 D9
D8
D7
D6
D5
D4
D3
D2
D1
D0
Figure 6-1. Serial Data Protocol - Read Operation
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
SCSb
SCLK
R/W
1
0
A3
A2
A1
A0
X
D15 D14 D13 D12 D11 D10 D9
D8
D7
D6
D5
D4
D3
D2
D1
D0
SDI
SDO
Figure 6-2. Serial Data Protocol - Write Operation
6.3 Features
The ADC12D800/500RF offers many features to make the device convenient to use in a wide variety of
applications. Table 6-4 is a summary of the features available, as well as details for the control mode
chosen. "N/A" means "Not Applicable."
Copyright © 2011–2013, Texas Instruments Incorporated
Functional Description
51
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
Table 6-4. Features and Modes
Control Pin
Active in ECM
Feature
Non-ECM
ECM
Default ECM State
Input Control and Adjust
AC/DC-coupled Mode
Selection
Selected via VCMO
Yes
No
Not available
N/A
Mid FSR value
Offset = 0 mV
Non-DES Mode
N/A
(Pin C2)
Selected via FSR
(Pin Y3)
Selected via the Config Reg
Input Full-scale Range Adjust
Input Offset Adjust Setting
(Addr: 3h and Bh)
Selected via the Config Reg
Not available
N/A
No
(Addr: 2h and Ah)
DES / Non-DES Mode
Selection
Selected via DES
(Pin V5)
Selected via the DES Bit
(Addr: 0h; Bit: 7)
Selected via the DEQ, DIQ Bits
DES Mode Input Selection
DESCLKIQ Mode(1)
Not available
Not available
N/A
N/A
(Addr: 0h; Bits: 6:5)
Selected via the DCK Bit
N/A
(Addr: Eh; Bit: 6)
Selected via the DES Timing
Adjust Reg
DES Timing Adjust(1)
Not available
Not available
N/A
N/A
Mid skew offset
(Addr: 7h)
Selected via the Config Reg
Sampling Clock Phase Adjust
tAD adjust disabled
(Addr: Ch and Dh)
Output Control and Adjust
Selected via the DPS Bit
Selected via DDRPh
(Pin W4)
DDR Clock Phase Selection
DDR / SDR DCLK Selection
No
N/A
N/A
N/A
Yes
N/A
No
0° Mode
DDR Mode
N/A
(Addr: 0h; Bit: 14)
Selected via the SDR Bit
Not available
Not available
(Addr: 0h; Bit: 2)
SDR Rising / Falling DCLK
Selection(1)
Selected via the DPS Bit
(Addr: 0h; Bit: 14)
LVDS Differential Voltage
Amplitude Selection
Selected via the OVS Bit
Higher amplitude only
Higher amplitude
N/A
(Addr: 0h; Bit: 13)
LVDS Common-Mode Voltage
Amplitude Selection(1)
Selected via VBG
(Pin B1)
Not available
Output Formatting
Selection(1)
Selected via the 2SC Bit
Offset Binary only
Offset Binary
TPM disabled
N/A
(Addr: 0h; Bit: 4)
Selected via TPM
(Pin A4)
Selected via the TPM Bit
Test Pattern Mode at Output
(Addr: 0h; Bit: 12)
Demux/Non-Demux Mode
Selection
Selected via NDM
(Pin A5)
Yes
N/A
N/A
Not available
Selected via the Config Reg
Master Mode,
RCOut1/2 disabled
AutoSync(1)
DCLK Reset(1)
Time Stamp(1)
Not available
Not available
Not available
(Addr: Eh)
Selected via the Config Reg
DCLK Reset disabled
Time Stamp disabled
(Addr: Eh; Bit: 0)
Selected via the TSE Bit
N/A
(Addr: 0h; Bit: 3)
Calibration
Yes
Selected via CAL
(Pin D6)
Selected via the CAL Bit
N/A
(CAL = 0)
On-command Calibration
(Addr: 0h; Bit: 15)
Power-on Calibration Delay
Selection
Selected via CalDly
(Pin V4)
Yes
N/A
Not available
N/A
tCAL
Selected via the Config Reg
Calibration Adjust(1)
Not available
Not available
(Addr: 4h)
Read/Write Calibration
Settings(1)
Selected via the SSC Bit
R/W calibration values
disabled
N/A
(Addr: 4h; Bit: 7)
Power-Down
Yes
Selected via PDI
(Pin U3)
Selected via the PDI Bit
Power down I-channel
I-channel operational
(Addr: 0h; Bit: 11)
(1) This feature functionality is not tested in production test; performance is tested in the specified/default mode only.
52 Functional Description
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
Table 6-4. Features and Modes (continued)
Control Pin
Active in ECM
Feature
Power down Q-channel
Non-ECM
ECM
Default ECM State
Selected via PDQ
(Pin V3)
Selected via the PDQ Bit
Yes
Q-channel operational
(Addr: 0h; Bit: 10)
6.3.1 Input Control and Adjust
There are several features and configurations for the input of the ADC12D800/500RF so that it may be
used in many different applications. This section covers AC/DC-coupled Mode, input full-scale range
adjust, input offset adjust, DES/Non-DES Mode, and sampling clock phase adjust.
6.3.1.1 AC/DC-coupled Mode
The analog inputs may be AC or DC-coupled. See AC/DC-Coupled Mode Pin (VCMO) for information on
how to select the desired mode and DC-coupled Input Signals and AC-coupled Input Signals for
applications information.
6.3.1.2 Input Full-Scale Range Adjust
The input full-scale range for the ADC12D800/500RF may be adjusted via Non-ECM or ECM. In Non-
ECM, a control pin selects a higher or lower value; see Full-Scale Input Range Pin (FSR). In ECM, the
input full-scale range may be adjusted with 15-bits of precision. See VIN_FSR in Converter Electrical
Characteristics Analog Input/Output and Reference Characteristics for electrical specification details. Note
that the higher and lower full-scale input range settings in Non-ECM correspond to the mid and min full-
scale input range settings in ECM. It is necessary to execute an on-command calibration following a
change of the input full-scale range. See Register Definitions for information about the registers.
6.3.1.3 Input Offset Adjust
The input offset adjust for the ADC12D800/500RF may be adjusted with 12-bits of precision plus sign via
ECM. See Register Definitions for information about the registers.
6.3.1.4 DES/Non-DES Mode
The ADC12D800/500RF can operate in Dual-Edge Sampling (DES) or Non-DES Mode. The DES Mode
allows for a single analog input to be sampled by both I- and Q-channels. One channel samples the input
on the rising edge of the sampling clock and the other samples the same input signal on the falling edge
of the sampling clock. A single input is thus sampled twice per clock cycle, resulting in an overall sample
rate of twice the sampling clock frequency, e.g. 1.6/1.0 GSPS with a 800/500 MHz sampling clock. Since
DES Mode uses both I- and Q-channels to process the input signal, both channels must be powered up
for the DES Mode to function properly.
In Non-ECM, only the I-input may be used for the DES Mode input. See Dual Edge Sampling Pin (DES)
for information on how to select the DES Mode. In ECM, either the I- or Q-input may be selected by first
using the DES bit (Addr: 0h, Bit 7) to select the DES Mode. The DEQ Bit (Addr: 0h, Bit: 6) is used to
select the Q-input, but the I-input is used by default. Also, both I- and Q-inputs may be driven externally,
i.e. DESIQ Mode, by using the DIQ bit (Addr: 0h, Bit 5). See THE ANALOG INPUTS for more information
about how to drive the ADC in DES Mode.
In DESCLKIQ Mode, the I- and Q-channels sample their inputs 180° out-of-phase with respect to one
another, similar to the other DES Modes. DESCLKIQ Mode is similar to the DESIQ Mode, except that the
I- and Q-channels remain electrically separate internal to the ADC12D800/500RF. For this reason, both I-
and Q-inputs must be externally driven for the DESCLKIQ Mode. The DCK Bit (Addr: Eh, Bit: 6) is used to
select the 180° sampling clock mode.
Copyright © 2011–2013, Texas Instruments Incorporated
Functional Description
53
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
The DESCLKIQ Mode results in the best bandwidth for the interleaved modes. In general, the bandwidth
decreases from Non-DES Mode to DES Mode (specifically, DESI or DESQ) because both channels are
sampling off the same input signal and non-ideal effects introduced by interleaving the two channels lower
the bandwidth. Driving both I- and Q-channels externally (DESIQ Mode and DESCLKIQ Mode) results in
better bandwidth because each channel is being driven, which reduces routing losses. The DESCLKIQ
Mode has better bandwidth than the DESIQ Mode because the routing internal to the ADC12D800/500 is
simpler, which results in less insertion loss.
In the DES Mode, the outputs must be carefully interleaved in order to reconstruct the sampled signal. If
the device is programmed into the 1:4 Demux DES Mode, the data is effectively demultiplexed by 1:4. If
the sampling clock is 800/500 MHz, the effective sampling rate is doubled to 1.6/1.0 GSPS and each of
the 4 output buses has an output rate of 400/250 MSPS. All data is available in parallel. To properly
reconstruct the sampled waveform, the four bytes of parallel data that are output with each DCLK must be
correctly interleaved. The sampling order is as follows, from the earliest to the latest: DQd, DId, DQ, DI.
See Figure 4-5. If the device is programmed into the Non-Demux DES Mode, two bytes of parallel data
are output with each edge of the DCLK in the following sampling order, from the earliest to the latest: DQ,
DI. See Figure 4-6.
6.3.1.5 DES Timing Adjust
The performance of the ADC12D800/500RF in DES Mode depends on how well the two channels are
interleaved, i.e. that the clock samples either channel with precisely a 50% duty-cycle, each channel has
the same offset (nominally code 2047/2048), and each channel has the same full-scale range. The
ADC12D800/500RF includes an automatic clock phase background adjustment in DES Mode to
automatically and continuously adjust the clock phase of the I- and Q-channels. In addition to this, the
residual fixed timing skew offset may be further manually adjusted, and further reduce timing spurs for
specific applications. See the DES Timing Adjust (Addr: 7h). As the DES Timing Adjust is programmed
from 0d to 127d, the magnitude of the Fs/2-Fin timing interleaving spur will decrease to a local minimum
and then increase again. The default, nominal setting of 64d may or may not coincide with this local
minimum. The user may manually skew the global timing to achieve the lowest possible timing interleaving
spur.
6.3.1.6 Sampling Clock Phase Adjust
The sampling clock (CLK) phase may be delayed internally to the ADC up to 825 ps in ECM. This feature
is intended to help the system designer remove small imbalances in clock distribution traces at the board
level when multiple ADCs are used, or to simplify complex system functions such as beam steering for
phase array antennas.
Additional delay in the clock path also creates additional jitter when using the sampling clock phase adjust.
Because the sampling clock phase adjust delays all clocks, including the DCLKs and output data, the user
is strongly advised to use the minimal amount of adjustment and verify the net benefit of this feature in his
system before relying on it.
6.3.2 Output Control and Adjust
There are several features and configurations for the output of the ADC12D800/500RF so that it may be
used in many different applications. This section covers DDR clock phase, LVDS output differential and
common-mode voltage, output formatting, Demux/Non-demux Mode, Test Pattern Mode, and Time Stamp.
6.3.2.1 SDR / DDR Clock
The ADC12D800/500RF output data can be delivered in Double Data Rate (DDR) or Single Data Rate
(SDR). For DDR, the DCLK frequency is half the data rate and data is sent to the outputs on both edges
of DCLK; see Figure 6-3. The DCLK-to-Data phase relationship may be either 0° or 90°. For 0° Mode, the
Data transitions on each edge of the DCLK. Any offset from this timing is tOSK; see Converter Electrical
Characteristics AC Electrical Characteristics for details. For 90° Mode, the DCLK transitions in the middle
54
Functional Description
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
of each Data cell. Setup and hold times for this transition, tSU and tH, may also be found in Converter
Electrical Characteristics AC Electrical Characteristics. The DCLK-to-Data phase relationship may be
selected via the DDRPh Pin in Non-ECM (see Dual Data Rate Phase Pin (DDRPh)) or the DPS bit in the
Configuration Register (Addr: 0h; Bit: 14) in ECM. Note that for DDR Mode, the 1:2 Demux Mode is not
available.
Data
DCLK
0°Mode
DCLK
90°Mode
Figure 6-3. DDR DCLK-to-Data Phase Relationship
For SDR, the DCLK frequency is the same as the data rate and data is sent to the outputs on a single
edge of DCLK; see Figure 6-4. The Data may transition on either the rising or falling edge of DCLK. Any
offset from this timing is tOSK; see Converter Electrical Characteristics AC Electrical Characteristics for
details. The DCLK rising / falling edge may be selected via the SDR bit in the Configuration Register
(Addr: 0h; Bit: 2) in ECM only.
Data
DCLK
SDR Rising
DCLK
SDR Falling
Figure 6-4. SDR DCLK-to-Data Phase Relationship
6.3.2.2 LVDS Output Differential Voltage
The ADC12D800/500RF is available with a selectable higher or lower LVDS output differential voltage.
This parameter is VOD and may be found in Converter Electrical Characteristics Digital Control and Output
Pin Characteristics. The desired voltage may be selected via the OVS Bit (Addr: 0h, Bit 13). For many
applications, in which the LVDS outputs are very close to an FPGA on the same board, for example, the
lower setting is sufficient for good performance; this will also reduce the possibility for EMI from the LVDS
outputs to other signals on the board. See Register Definitions for more information.
6.3.2.3 LVDS Output Common-Mode Voltage
The ADC12D800/500RF is available with a selectable higher or lower LVDS output common-mode
voltage. This parameter is VOS and may be found in Converter Electrical Characteristics Digital Control
and Output Pin Characteristics. See LVDS Output Common-mode Pin (VBG) for information on how to
select the desired voltage.
Copyright © 2011–2013, Texas Instruments Incorporated
Functional Description
55
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
6.3.2.4 Output Formatting
The formatting at the digital data outputs may be either offset binary or two's complement. The default
formatting is offset binary, but two's complement may be selected via the 2SC Bit (Addr: 0h, Bit 4); see
Register Definitions for more information.
6.3.2.5 Demux/Non-demux Mode
The ADC12D800/500RF may be in one of two demultiplex modes: Demux Mode or Non-Demux Mode
(also sometimes referred to as 1:1 Demux Mode). In Non-Demux Mode, the data from the input is simply
output at the sampling rate on one 12-bit bus. In Demux Mode, the data from the input is output at half the
sampling rate, on twice the number of buses. Demux/Non-Demux Mode may only be selected by the NDM
pin. In Non-DES Mode, the output data from each channel may be demultiplexed by a factor of 1:2 (1:2
Demux Non-DES Mode) or not demultiplexed (Non-Demux Non-DES Mode). In DES Mode, the output
data from both channels interleaved may be demultiplexed (1:4 Demux DES Mode) or not demultiplexed
(Non-Demux DES Mode).
Note that for 1:2 Demux Mode, the Dual Data Rate (DDR) is not available. See Table 6-5 for a selection of
available modes.
Table 6-5. Supported Demux, Data Rate Modes
Non-Demux Mode
0° Mode / 90° Mode
Rising / Falling Mode
1:2 Demux Mode
Not Available
DDR
SDR
Rising / Falling Mode
6.3.2.6 Test Pattern Mode
The ADC12D800/500RF can provide a test pattern at the four output buses independently of the input
signal to aid in system debug. In Test Pattern Mode, the ADC is disengaged and a test pattern generator
is connected to the outputs, including ORI and ORQ. The test pattern output is the same in DES Mode or
Non-DES Mode. Each port is given a unique 12-bit word, alternating between 1's and 0's. When the part is
programmed into the Demux Mode, the test pattern’s order is described in Table 6-6. If the I- or Q-channel
is powered down, the test pattern will not be output for that channel.
Table 6-6. Test Pattern by Output Port in
Demux Mode
Time
T0
Qd
Id
Q
I
ORQ
1b
1b
1b
1b
0b
1b
1b
1b
1b
0b
1b
1b
1b
...
ORI
1b
1b
1b
1b
0b
1b
1b
1b
1b
0b
1b
1b
1b
...
Comments
FF7h
FF7h
008h
008h
008h
FF7h
FF7h
008h
008h
008h
FF7h
FF7h
008h
...
FEFh
FEFh
010h
010h
010h
FEFh
FEFh
010h
010h
010h
FEFh
FEFh
010h
...
008h
008h
FF7h
FF7h
008h
008h
008h
FF7h
FF7h
008h
008h
008h
FF7h
...
010h
010h
FEFh
FEFh
010h
010h
010h
FEFh
FEFh
010h
010h
010h
FEFh
...
T1
Pattern
Sequence
n
T2
T3
T4
T5
T6
Pattern
Sequence
n+1
T7
T8
T9
T10
T11
T12
T13
Pattern
Sequence
n+2
56
Functional Description
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
When the part is programmed into the Non-Demux Mode, the test pattern’s order is described in Table 6-
7.
Table 6-7. Test Pattern by Output Port in
Non-Demux Mode
Time
T0
Q
I
ORQ
0b
1b
0b
1b
0b
0b
1b
0b
1b
0b
0b
1b
0b
1b
...
ORI
0b
1b
0b
1b
0b
0b
1b
0b
1b
0b
0b
1b
0b
1b
...
Comments
008h
FF7h
008h
FF7h
008h
008h
FF7h
008h
FF7h
008h
008h
FF7h
008h
FF7h
...
010h
FEFh
010h
FEFh
010h
010h
FEFh
010h
FEFh
010h
010h
FEFh
010h
FEFh
...
T1
Pattern Sequence
T2
n
T3
T4
T5
T6
Pattern Sequence
T7
n+1
T8
T9
T10
T11
T12
T13
T14
Pattern Sequence
n+2
6.3.2.7 Time Stamp
The Time Stamp feature enables the user to capture the timing of an external trigger event, relative to the
sampled signal. When enabled via the TSE Bit (Addr: 0h; Bit: 3), the LSB of the digital outputs (DQd, DQ,
DId, DI) captures the trigger information. In effect, the 12-bit converter becomes an 11-bit converter and
the LSB acts as a 1-bit converter with the same latency as the 11-bit converter. The trigger should be
applied to the DCLK_RST input. It may be asynchronous to the ADC sampling clock.
6.3.3 Calibration Feature
The ADC12D800/500RF calibration must be run to achieve specified performance. The calibration
procedure is exactly the same regardless of how it was initiated or when it is run. Calibration trims the
analog input differential termination resistors, the CLK input resistor, and sets internal bias currents which
affect the linearity of the converter. This minimizes full-scale error, offset error, DNL and INL, which results
in the maximum dynamic performance, as measured by: SNR, THD, SINAD (SNDR) and ENOB.
6.3.3.1 Calibration Control Pins and Bits
Table 6-8 is a summary of the pins and bits used for calibration. See Ball Descriptions and Equivalent
Circuits for complete pin information and Figure 4-8 for the timing diagram.
Copyright © 2011–2013, Texas Instruments Incorporated
Functional Description
57
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
Table 6-8. Calibration Pins
Pin (Bit)
Name
Function
D6
CAL
(Calibration)
Initiate calibration
(Addr: 0h; Bit 15)
CalDly
(Calibration Delay)
V4
(Addr: 4h)
B5
Select power-on calibration delay
Adjust calibration sequence
Calibration Adjust
CalRun
(Calibration Running)
Indicates while calibration is running
Rtrim+/-
(Input termination trim resistor)
C1/D2
External resistor used to calibrate analog and CLK inputs
External resistor used to calibrate internal linearity
Rext+/-
(External Reference resistor)
C3/D3
6.3.3.2 How to Execute a Calibration
Calibration may be initiated by holding the CAL pin low for at least tCAL_L clock cycles, and then holding it
high for at least another tCAL_H clock cycles, as defined in Converter Electrical Characteristics Calibration.
The minimum tCAL_L and tCAL_H input clock cycle sequences are required to ensure that random noise does
not cause a calibration to begin when it is not desired. The time taken by the calibration procedure is
specified as tCAL. The CAL Pin is active in both ECM and Non-ECM. However, in ECM, the CAL Pin is
logically OR'd with the CAL Bit, so both the pin and bit are required to be set low before executing another
calibration via either pin or bit.
6.3.3.3 Power-on Calibration
For standard operation, power-on calibration begins after a time delay following the application of power,
as determined by the setting of the CalDly Pin and measured by tCalDly (see Converter Electrical
Characteristics Calibration). This delay allows the power supply to come up and stabilize before the
power-on calibration takes place. The best setting (short or long) of the CalDly Pin depends upon the
settling time of the power supply.
It is strongly recommended to set CalDly Pin (to either logic-high or logic-low) before powering the device
on since this pin affects the power-on calibration timing. This may be accomplished by setting CalDly via
an external 1kΩ resistor connected to GND or VA. If the CalDly Pin is toggled while the device is powered-
on, it can execute a calibration even though the CAL Pin/Bit remains logic-low.
The power-on calibration will be not be performed if the CAL pin is logic-high at power-on. In this case, the
calibration cycle will not begin until the on-command calibration conditions are met. The
ADC12D800/500RF will function with the CAL pin held high at power up, but no calibration will be done
and performance will be impaired.
If it is necessary to toggle the CalDly Pin before the system power up sequence, then the CAL Pin/Bit
must be set to logic-high during the toggling and afterwards for 109 Sampling Clock cycles. This will
prevent the power-on calibration, so an on-command calibration must be executed or the performance will
be impaired.
6.3.3.4 On-command Calibration
In addition to the power-on calibration, it is recommended to execute an on-command calibration
whenever the settings or conditions to the device are altered significantly, in order to obtain optimal
parametric performance. Some examples include: changing the FSR via either ECM or Non-ECM, power-
cycling either channel, and switching into or out of DES Mode. For best performance, it is also
recommended that an on-command calibration be run 20 seconds or more after application of power and
whenever the operating temperature changes significantly, relative to the specific system performance
requirements.
58
Functional Description
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
Due to the nature of the calibration feature, it is recommended to avoid unnecessary activities on the
device while the calibration is taking place. For example, do not read or write to the Serial Interface or use
the DCLK Reset feature while calibrating the ADC. Doing so will impair the performance of the device until
it is re-calibrated correctly. Also, it is recommended to not apply a strong narrow-band signal to the analog
inputs during calibration because this may impair the accuracy of the calibration; broad spectrum noise is
acceptable.
6.3.3.5 Calibration Adjust
The sequence of the calibration event itself may be adjusted. This feature can be used if a shorter
calibration time than the default is required; see tCAL in Converter Electrical Characteristics Calibration.
However, the performance of the device, when using this feature is not ensured.
The calibration sequence may be adjusted via CSS (Addr: 4h, Bit 14). The default setting of CSS = 1b
executes both RIN and RIN_CLK Calibration (using Rtrim) and internal linearity Calibration (using Rext).
Executing a calibration with CSS = 0b executes only the internal linearity Calibration. The first time that
Calibration is executed, it must be with CSS = 1b to trim RIN and RIN_CLK. However, once the device is at
its operating temperature and RIN has been trimmed at least one time, it will not drift significantly. To save
time in subsequent calibrations, trimming RIN and RIN_CLK may be skipped, i.e. by setting CSS = 0b.
6.3.3.6 Read/Write Calibration Settings
When the ADC performs a calibration, the calibration constants are stored in an array which is accessible
via the Calibration Values register (Addr: 5h). To save the time which it takes to execute a calibration, tCAL
,
or to allow re-use of a previous calibration result, these values can be read from and written to the register
at a later time. For example, if an application requires the same input impedance, RIN, this feature can be
used to load a previously determined set of values. For the calibration values to be valid, the ADC must be
operating under the same conditions, including temperature, at which the calibration values were originally
determined by the ADC.
To read calibration values from the SPI, do the following:
1. Set ADC to desired operating conditions.
2. Set SSC (Addr: 4h, Bit 7) to 1.
3. Read exactly 240 times the Calibration Values register (Addr: 5h). The register values are R0, R1, R2...
R239 where R0 is a dummy value. The contents of R<239:1> should be stored.
4. Set SSC (Addr: 4h, Bit 7) to 0.
5. Continue with normal operation.
To write calibration values to the SPI, do the following:
1. Set ADC to operating conditions at which Calibration Values were previously read.
2. Set SSC (Addr: 4h, Bit 7) to 1.
3. Write exactly 239 times the Calibration Values register (Addr: 5h). The registers should be written with
stored register values R1, R2... R239.
4. Make two additional dummy writes of 0000h.
5. Set SSC (Addr: 4h, Bit 7) to 0.
6. Continue with normal operation.
Copyright © 2011–2013, Texas Instruments Incorporated
Functional Description
59
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
6.3.3.7 Calibration and Power-Down
If PDI and PDQ are simultaneously asserted during a calibration cycle, the ADC12D800/500RF will
immediately power down. The calibration cycle will continue when either or both channels are powered
back up, but the calibration will be compromised due to the incomplete settling of bias currents directly
after power up. Therefore, a new calibration should be executed upon powering the ADC12D800/500RF
back up. In general, the ADC12D800/500RF should be recalibrated when either or both channels are
powered back up, or after one channel is powered down. For best results, this should be done after the
device has stabilized to its operating temperature.
6.3.3.8 Calibration and the Digital Outputs
During calibration, the digital outputs (including DI, DId, DQ, DQd and OR) are set logic-low, to reduce
noise. The DCLK runs continuously during calibration. After the calibration is completed and the CalRun
signal is logic-low, it takes an additional 60 Sampling Clock cycles before the output of the
ADC12D800/500RF is valid converted data from the analog inputs. This is the time it takes for the pipeline
to flush, as well as for other internal processes.
6.3.4 Power Down
On the ADC12D800/500RF, the I- and Q-channels may be powered down individually. This may be
accomplished via the control pins, PDI and PDQ, or via ECM. In ECM, the PDI and PDQ pins are logically
OR'd with the Control Register setting. See Power Down I-channel Pin (PDI) and Power Down Q-channel
Pin (PDQ) for more information.
6.4 Applications Information
6.4.1 THE ANALOG INPUTS
The ADC12D800/500RF will continuously convert any signal which is present at the analog inputs, as long
as a CLK signal is also provided to the device. This section covers important aspects related to the analog
inputs including: acquiring the input, driving the ADC in DES Mode, the reference voltage and FSR, out-of-
range indication, AC/DC-coupled signals, and single-ended input signals.
6.4.1.1 Acquiring the Input
The Aperture Delay, tAD, is the amount of delay, measured from the sampling edge of the clock input, after
which signal present at the input pin is sampled inside the device. Data is acquired at the rising edge of
CLK+ in Non-DES Mode and both the falling and rising edges of CLK+ in DES Mode. In Non-DES Mode,
the I- and Q-channels always sample data on the rising edge of CLK+. In DES Mode, i.e. DESI, DESQ,
DESIQ, and DESCLKIQ, the I-channel samples data on the rising edge of CLK+ and the Q-channel
samples data on the falling edge of CLK+. The digital equivalent of that data is available at the digital
outputs a constant number of sampling clock cycles later for the DI, DQ, DId and DQd output buses, a.k.a.
Latency, depending on the demultiplex mode which is selected. In addition to the Latency, there is a
constant output delay, tOD, before the data is available at the outputs. See tOD in the Timing Diagrams.
See tLAT, tAD, and tODin Converter Electrical Characteristics AC Electrical Characteristics.
6.4.1.2 Driving the ADC in DES Mode
The ADC12D800/500RF can be configured as either a 2-channel, 800/500 GSPS device (Non-DES Mode)
or a 1-channel 1.6/1.0 GSPS device (DES Mode). When the device is configured in DES Mode, there is a
choice for with which input to drive the single-channel ADC. These are the 3 options:
DES – externally driving the I-channel input only. This is the default selection when the ADC is configured
in DES Mode. It may also be referred to as “DESI” for added clarity.
DESQ – externally driving the Q-channel input only.
60
Functional Description
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
DESIQ, DESCLKIQ – externally driving both the I- and Q-channel inputs. VinI+ and VinQ+ should be
driven with the exact same signal. VinI- and VinQ- should be driven with the exact same signal, which is
the differential compliment to the one driving VinI+ and VinQ+.
The input impedance for each I- and Q-input is 100Ω differential (or 50Ω single-ended), so the trace to
each VinI+, VinI-, VinQ+, and VinQ- should always be 50Ω single-ended. If a single I- or Q-input is being
driven, then that input will present a 100Ω differential load. For example, if a 50Ω single-ended source is
driving the ADC, then a 1:2 balun will transform the impedance to 100Ω differential. However, if the ADC
is being driven in DESIQ Mode, then the 100Ω differential impedance from the I-input will appear in
parallel with the Q-input for a composite load of 50Ω differential and a 1:1 balun would be appropriate.
See Figure 6-5 for an example circuit driving the ADC in DESIQ Mode. A recommended part selection is
using the Mini-Circuits TC1-1-13MA+ balun with Ccouple = 0.22µF.
C
couple
V
IN
I+
50W
Source
100W
1:1 Balun
V
I-
C
couple
IN
C
C
couple
couple
V
Q+
IN
100W
Q-
V
IN
ADC12D800/50
Figure 6-5. Driving DESIQ Mode
In the case that only one channel is used in Non-DES Mode or that the ADC is driven in DESI or DESQ
Mode, the unused analog input should be terminated to reduce any noise coupling into the ADC. See
Table 6-9 for details.
Table 6-9. Unused Analog Input Recommended Termination
Mode
Power Down
Coupling
AC/DC
DC
Recommended Termination
Tie Unused+ and Unused- to Vbg
Tie Unused+ and Unused- to Vbg
Tie Unused+ to Unused-
Non-DES
Yes
No
DES/Non-DES
DES/Non-DES
No
AC
6.4.1.3 FSR and the Reference Voltage
The full-scale analog differential input range (VIN_FSR) of the ADC12D800/500RF is derived from an
internal bandgap reference. In Non-ECM, this full-scale range has two settings controlled by the FSR Pin;
see Full-Scale Input Range Pin (FSR). The FSR Pin operates on both I- and Q-channels. In ECM, the full-
scale range may be independently set for each channel via Addr:3h and Bh with 15 bits of precision; see
Register Definitions. The best SNR is obtained with a higher full-scale input range, but better distortion
and SFDR are obtained with a lower full-scale input range. It is not possible to use an external analog
reference voltage to modify the full-scale range, and this adjustment should only be done digitally, as
described.
A buffered version of the internal bandgap reference voltage is made available at the VBG Pin for the user.
The VBG pin can drive a load of up to 80 pF and source or sink up to 100 μA. It should be buffered if more
current than this is required. This pin remains as a constant reference voltage regardless of what full-scale
range is selected and may be used for a system reference. VBG is a dual-purpose pin and it may also be
used to select a higher LVDS output common-mode voltage; see LVDS Output Common-mode Pin (VBG).
Copyright © 2011–2013, Texas Instruments Incorporated
Functional Description
61
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
6.4.1.4 Out-Of-Range Indication
Differential input signals are digitized to 12 bits, based on the full-scale range. Signal excursions beyond
the full-scale range, i.e. greater than +VIN_FSR/2 or less than -VIN_FSR/2, will be clipped at the output. An
input signal which is above the FSR will result in all 1's at the output and an input signal which is below
the FSR will result in all 0's at the output. When the conversion result is clipped for the I-channel input, the
Out-of-Range I-channel (ORI) output is activated such that ORI+ goes high and ORI- goes low while the
signal is out of range. This output is active as long as accurate data on either or both of the buses would
be outside the range of 000h to FFFh. The Q-channel has a separate ORQ which functions similarly.
6.4.1.5 Maximum Input Range
The recommended operating and absolute maximum input range may be found in Operating Ratings and
Absolute Maximum Ratings, respectively. Under the stated allowed operating conditions, each Vin+ and
Vin- input pin may be operated in the range from 0V to 2.15V if the input is a continuous 100% duty cycle
signal and from 0V to 2.5V if the input is a 10% duty cycle signal. The absolute maximum input range for
Vin+ and Vin- is from -0.15V to 2.5V. These limits apply only for input signals for which the input common
mode voltage is properly maintained.
6.4.1.6 AC-coupled Input Signals
The ADC12D800/500RF analog inputs require a precise common-mode voltage. This voltage is generated
on-chip when AC-coupling Mode is selected. See AC/DC-Coupled Mode Pin (VCMO) for more information
about how to select AC-coupled Mode.
In AC-coupled Mode, the analog inputs must of course be AC-coupled. For an ADC12D800/500RF used
in a typical application, this may be accomplished by on-board capacitors, as shown in Figure 6-6. For the
ADC12D800RFRB, the SMA inputs on the Reference Board are directly connected to the analog inputs on
the ADC12D800RF, so this may be accomplished by DC blocks (included with the hardware kit).
When the AC-coupled Mode is selected, an analog input channel that is not used (e.g. in DES Mode)
should be connected to AC ground, e.g. through capacitors to ground . Do not connect an unused analog
input directly to ground.
C
C
couple
V
+
IN
couple
V
V
-
IN
CMO
ADC12D800/500
Figure 6-6. AC-coupled Differential Input
The analog inputs for the ADC12D800/500RF are internally buffered, which simplifies the task of driving
these inputs and the RC pole which is generally used at sampling ADC inputs is not required. If the user
desires to place an amplifier circuit before the ADC, care should be taken to choose an amplifier with
adequate noise and distortion performance, and adequate gain at the frequencies used for the application.
62
Functional Description
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
6.4.1.7 DC-coupled Input Signals
In DC-coupled Mode, the ADC12D800/500RF differential inputs must have the correct common-mode
voltage. This voltage is provided by the device itself at the VCMO output pin. It is recommended to use this
voltage because the VCMO output potential will change with temperature and the common-mode voltage of
the driving device should track this change. Full-scale distortion performance falls off as the input common
mode voltage deviates from VCMO. Therefore, it is recommended to keep the input common-mode voltage
within 100 mV of VCMO (typical), although this range may be extended to ±150 mV (maximum). See VCMI
in Converter Electrical Characteristics Analog Input/Output and Reference Characteristics and ENOB vs.
VCMI in Typical Performance Plots. Performance in AC- and DC-coupled Mode are similar, provided that
the input common mode voltage at both analog inputs remains within 100 mV of VCMO
.
6.4.1.8 Single-Ended Input Signals
The analog inputs of the ADC12D800/500RF are not designed to accept single-ended signals. The best
way to handle single-ended signals is to first convert them to differential signals before presenting them to
the ADC. The easiest way to accomplish single-ended to differential signal conversion is with an
appropriate balun-transformer, as shown in Figure 6-7.
C
couple
V
IN
+
50W
Source
100W
1:2 Balun
V
IN
-
C
couple
ADC12D800/500
Figure 6-7. Single-Ended to Differential Conversion Using a Balun
When selecting a balun, it is important to understand the input architecture of the ADC. The impedance of
the analog source should be matched to the ADC12D800/500RF's on-chip 100Ω differential input
termination resistor. The range of this termination resistor is specified as RIN in Converter Electrical
Characteristics Analog Input/Output and Reference Characteristics.
6.4.2 THE CLOCK INPUTS
The ADC12D800/500RF has a differential clock input, CLK+ and CLK-, which must be driven with an AC-
coupled, differential clock signal. This provides the level shifting necessary to allow for the clock to be
driven with LVDS, PECL, LVPECL, or CML levels. The clock inputs are internally terminated to 100Ω
differential and self-biased. This section covers coupling, frequency range, level, duty-cycle, jitter, and
layout considerations.
6.4.2.1 CLK Coupling
The clock inputs of the ADC12D800/500RF must be capacitively coupled to the clock pins as indicated in
Figure 6-8.
C
C
couple
CLK+
CLK-
couple
ADC12D800/500
Figure 6-8. Differential Input Clock Connection
Copyright © 2011–2013, Texas Instruments Incorporated
Functional Description
63
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
The choice of capacitor value will depend on the clock frequency, capacitor component characteristics and
other system economic factors. For example, on the ADC12D800RFRB, the capacitors have the value
Ccouple = 4.7 nF which yields a highpass cutoff frequency, fc = 677.2 kHz.
6.4.2.2 CLK Frequency
Although the ADC12D800/500RF is tested and its performance is ensured with a differential 1.0/1.6 GHz
sampling clock, it will typically function well over the input clock frequency range; see fCLK(min) and
fCLK(max) in Converter Electrical Characteristics AC Electrical Characteristics. Operation up to fCLK(max) is
possible if the maximum ambient temperatures indicated are not exceeded. Operating at sample rates
above fCLK(max) for the maximum ambient temperature may result in reduced device reliability and
product lifetime. This is due to the fact that higher sample rates results in higher power consumption and
die temperatures.
6.4.2.3 CLK Level
The input clock amplitude is specified as VIN_CLK in Converter Electrical Characteristics Sampling Clock
Characteristics. Input clock amplitudes above the max VIN_CLK may result in increased input offset voltage.
This would cause the converter to produce an output code other than the expected 2047/2048 when both
input pins are at the same potential. Insufficient input clock levels will result in poor dynamic performance.
Both of these results may be avoided by keeping the clock input amplitude within the specified limits of
VIN_CLK
.
6.4.2.4 CLK Duty Cycle
The duty cycle of the input clock signal can affect the performance of any A/D converter. The
ADC12D800/500RF features a duty cycle clock correction circuit which can maintain performance over the
20%-to-80% specified clock duty-cycle range. This feature is enabled by default and provides improved
ADC clocking, especially in the Dual-Edge Sampling (DES) Mode.
6.4.2.5 CLK Jitter
High speed, high performance ADCs such as the ADC12D800/500RF require a very stable input clock
signal with minimum phase noise or jitter. ADC jitter requirements are defined by the ADC resolution
(number of bits), maximum ADC input frequency and the input signal amplitude relative to the ADC input
full scale range. The maximum jitter (the sum of the jitter from all sources) allowed to prevent a jitter-
induced reduction in SNR is found to be
tJ(MAX) = ( VIN(P-P)/ VFSR) x (1/(2(N+1) x π x fIN))
(1)
where tJ(MAX) is the rms total of all jitter sources in seconds, VIN(P-P) is the peak-to-peak analog input signal,
VFSR is the full-scale range of the ADC, "N" is the ADC resolution in bits and fIN is the maximum input
frequency, in Hertz, at the ADC analog input.
tJ(MAX) is the square root of the sum of the squares (RSS) of the jitter from all sources, including: the ADC
input clock, system, input signals and the ADC itself. Since the effective jitter added by the ADC is beyond
user control, it is recommended to keep the sum of all other externally added jitter to a minimum.
6.4.2.6 CLK Layout
The ADC12D800/500RF clock input is internally terminated with a trimmed 100Ω resistor. The differential
input clock line pair should have a characteristic impedance of 100Ω and (when using a balun), be
terminated at the clock source in that (100Ω) characteristic impedance.
It is good practice to keep the ADC input clock line as short as possible, tightly coupled, keep it well away
from any other signals, and treat it as a transmission line. Otherwise, other signals can introduce jitter into
the input clock signal. Also, the clock signal can introduce noise into the analog path if it is not properly
isolated.
64
Functional Description
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
6.4.3 THE LVDS OUTPUTS
The Data, ORI, ORQ, DCLKI and DCLKQ outputs are LVDS. The electrical specifications of the LVDS
outputs are compatible with typical LVDS receivers available on ASIC and FPGA chips; but they are not
IEEE or ANSI communications standards compliant due to the low +1.9V supply used on this chip. These
outputs should be terminated with a 100Ω differential resistor placed as closely to the receiver as possible.
If the 100Ω differential resistance is built in to the receiver, then an externally placed resistor is not
necessary. This section covers common-mode and differential voltage, and data rate.
6.4.3.1 Common-mode and Differential Voltage
The LVDS outputs have selectable common-mode and differential voltage, VOS and VOD; see Converter
Electrical Characteristics Digital Control and Output Pin Characteristics. See Output Control and Adjust for
more information.
Selecting the higher VOS will also increase VOD slightly. The differential voltage, VOD, may be selected for
the higher or lower value. For short LVDS lines and low noise systems, satisfactory performance may be
realized with the lower VOD. This will also result in lower power consumption. If the LVDS lines are long
and/or the system in which the ADC12D800/500RF is used is noisy, it may be necessary to select the
higher VOD
.
6.4.3.2 Output Data Rate
The data is produced at the output at the same rate it is sampled at the input. The minimum
recommended input clock rate for this device is fCLK(MIN); see Converter Electrical Characteristics AC
Electrical Characteristics. However, it is possible to operate the device in 1:2 Demux Mode and capture
data from just one 12-bit bus, e.g. just DI (or DId) although both DI and DId are fully operational. This will
decimate the data by two and effectively halve the data rate.
6.4.3.3 Terminating Unused LVDS Output Pins
If the ADC is used in Non-Demux Mode, then only the DI and DQ data outputs will have valid data present
on them. The DId and DQd data outputs may be left not connected; if unused, they are internally tri-
stated.
Similarly, if the Q-channel is powered-down (i.e. PDQ is logic-high), the DQ data output pins, DCLKQ and
ORQ may be left not connected.
6.4.4 SYNCHRONIZING MULTIPLE ADC12D800/500RFS IN A SYSTEM
The ADC12D800/500RF has two features to assist the user with synchronizing multiple ADCs in a system;
AutoSync and DCLK Reset. The AutoSync feature is new and designates one ADC12D800/500RF as the
Master ADC and other ADC12D800/500RFs in the system as Slave ADCs. The DCLK Reset feature
performs the same function as the AutoSync feature, but is the first generation solution to synchronizing
multiple ADCs in a system; it is disabled by default. For the application in which there are multiple Master
and Slave ADC12D800/500RFs in a system, AutoSync may be used to synchronize the Slave
ADC12D800/500RF(s) to each respective Master ADC12D800/500RF and the DCLK Reset may be used
to synchronize the Master ADC12D800/500RFs to each other.
If the AutoSync or DCLK Reset feature is not used, see Table 6-10 for recommendations about
terminating unused pins.
Copyright © 2011–2013, Texas Instruments Incorporated
Functional Description
65
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
Table 6-10. Unused AutoSync and DCLK Reset Pin Recommendation
Pin(s)
Unused termination
Do not connect.
RCLK+/-
RCOUT1+/-
RCOUT2+/-
DCLK_RST+
DCLK_RST-
Do not connect.
Do not connect.
Connect to GND via 1kΩ resistor.
Connect to VA via 1kΩ resistor.
6.4.4.1 AutoSync Feature
AutoSync is a new feature which continuously synchronizes the outputs of multiple ADC12D800/500RFs
in a system. It may be used to synchronize the DCLK and data outputs of one or more Slave
ADC12D800/500RFs to one Master ADC12D800/500RF. Several advantages of this feature include: no
special synchronization pulse required, any upset in synchronization is recovered upon the next DCLK
cycle, and the Master/Slave ADC12D800/500RFs may be arranged as a binary tree so that any upset will
quickly propagate out of the system.
An example system is shown below in Figure 6-9 which consists of one Master ADC and two Slave ADCs.
For simplicity, only one DCLK is shown; in reality, there is DCLKI and DCLKQ, but they are always in
phase with one another.
Slave 1
ADC12D800/500
Slave 2
ADC12D800/500
RCOut1
RCOut2
DCLK
RCOut1
RCOut2
DCLK
Master
ADC12D800/500
RCOut1
RCOut2
DCLK
CLK
Figure 6-9. AutoSync Example
In order to synchronize the DCLK (and Data) outputs of multiple ADCs, the DCLKs must transition at the
same time, as well as be in phase with one another. The DCLK at each ADC is generated from the CLK
after some latency, plus tOD minus tAD. Therefore, in order for the DCLKs to transition at the same time,
the CLK signal must reach each ADC at the same time. To tune out any differences in the CLK path to
each ADC, the tAD adjust feature may be used. However, using the tAD adjust feature will also affect when
the DCLK is produced at the output. If the device is in Demux Mode, then there are four possible phases
which each DCLK may be generated on because the typical CLK = 1GHz and DCLK = 250 MHz for this
case. The RCLK signal controls the phase of the DCLK, so that each Slave DCLK is on the same phase
as the Master DCLK.
The AutoSync feature may only be used via the Control Registers. For more information, see AN-2132.
6.4.4.2 DCLK Reset Feature
The DCLK reset feature is available via ECM, but it is disabled by default. DCLKI and DCLKQ are always
synchronized, by design, and do not require a pulse from DCLK_RST to become synchronized.
The DCLK_RST signal must observe certain timing requirements, which are shown in Figure 4-7 of the
Timing Diagrams. The DCLK_RST pulse must be of a minimum width and its deassertion edge must
observe setup and hold times with respect to the CLK input rising edge. These timing specifications are
listed as tPWR, tSR and tHR and may be found in Converter Electrical Characteristics AC Electrical
Characteristics.
66
Functional Description
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
The DCLK_RST signal can be asserted asynchronously to the input clock. If DCLK_RST is asserted, the
DCLK output is held in a designated state (logic-high) in Demux Mode; in Non-Demux Mode, the DCLK
continues to function normally. Depending upon when the DCLK_RST signal is asserted, there may be a
narrow pulse on the DCLK line during this reset event. When the DCLK_RST signal is de-asserted, there
are tSYNC_DLY CLK cycles of systematic delay and the next CLK rising edge synchronizes the DCLK output
with those of other ADC12D800/500RFs in the system. For 90° Mode (DDRPh = logic-high), the
synchronizing edge occurs on the rising edge of CLK, 4 cycles after the first rising edge of CLK after
DCLK_RST is released. For 0° Mode (DDRPh = logic-low), this is 5 cycles instead. The DCLK output is
enabled again after a constant delay of tOD
.
For both Demux and Non-Demux Modes, there is some uncertainty about how DCLK comes out of the
reset state for the first DCLK_RST pulse. For the second (and subsequent) DCLK_RST pulses, the DCLK
will come out of the reset state in a known way. Therefore, if using the DCLK Reset feature, it is
recommended to apply one "dummy" DCLK_RST pulse before using the second DCLK_RST pulse to
synchronize the outputs. This recommendation applies each time the device or channel is powered-on.
When using DCLK_RST to synchronize multiple ADC12D800/500RFs, it is required that the Select Phase
bits in the Control Register (Addr: Eh, Bits 3,4) be the same for each Master ADC12D800/500RF.
6.4.5 SUPPLY/GROUNDING, LAYOUT AND THERMAL RECOMMENDATIONS
6.4.5.1 Power Planes
All supply buses for the ADC should be sourced from a common linear voltage regulator. This ensures
that all power buses to the ADC are turned on and off simultaneously. This single source will be split into
individual sections of the power plane, with individual decoupling and connection to the different power
supply buses of the ADC. Due to the low voltage but relatively high supply current requirement, the
optimal solution may be to use a switching regulator to provide an intermediate low voltage, which is then
regulated down to the final ADC supply voltage by a linear regulator. Please refer to the documentation
provided for the ADC12D800RFRB for additional details on specific regulators that are recommended for
this configuration.
Power for the ADC should be provided through a broad plane which is located on one layer adjacent to
the ground plane(s). Placing the power and ground planes on adjacent layers will provide low impedance
decoupling of the ADC supplies, especially at higher frequencies. The output of a linear regulator should
feed into the power plane through a low impedance multi-via connection. The power plane should be split
into individual power peninsulas near the ADC. Each peninsula should feed a particular power bus on the
ADC, with decoupling for that power bus connecting the peninsula to the ground plane near each
power/ground pin pair. Using this technique can be difficult on many printed circuit CAD tools. To work
around this, zero ohm resistors can be used to connect the power source net to the individual nets for the
different ADC power buses. As a final step, the zero ohm resistors can be removed and the plane and
peninsulas can be connected manually after all other error checking is completed.
6.4.5.2 Bypass Capacitors
The general recommendation is to have one 100nF capacitor for each power/ground pin pair. The
capacitors should be surface mount multi-layer ceramic chip capacitors similar to Panasonic part number
ECJ-0EB1A104K.
6.4.5.3 Ground Planes
Grounding should be done using continuous full ground planes to minimize the impedance for all ground
return paths, and provide the shortest possible image/return path for all signal traces.
Copyright © 2011–2013, Texas Instruments Incorporated
Functional Description
67
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
6.4.5.4 Power System Example
The ADC12D800RFRB uses continuous ground planes (except where clear areas are needed to provide
appropriate impedance management for specific signals), see Figure 6-10. Power is provided on one
plane, with the 1.9V ADC supply being split into multiple zones or peninsulas for the specific power buses
of the ADC. Decoupling capacitors are connected between these power bus peninsulas and the adjacent
ground planes using vias. The capacitors are located as close to the individual power/ground pin pairs of
the ADC as possible. In most cases, this means the capacitors are located on the opposite side of the
PCB to the ADC.
HV or Unreg
Voltage
Linear
Regulator
Switching
Regulator
Cross Section
Line
Intermediate
Voltage
1.9V ADC Main
VTC VA VE
VDR
ADC
Top Layer œ Signal 1
Ground 1
Dielectric 1
Dielectric 2
Dielectric 3
Dielectric 4
Dielectric 5
Dielectric 6
Dielectric 7
Signal 2
Ground 2
Signal 3
Power 1
Ground 3
Bottom Layer œ Signal X
Figure 6-10. Power and Grounding Example
6.4.5.5 Thermal Management
The Heat Slug Ball Grid Array (HSBGA) package is a modified version of the industry standard plastic
BGA (Ball Grid Array) package. Inside the package, a copper heat spreader cap is attached to the
substrate top with exposed metal in the center top area of the package. This results in a 20%
improvement (typical) in thermal performance over the standard plastic BGA package.
68
Functional Description
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
Q
JC_1
Copper Heat Slug
Mold Compound
Not to Scale
Cross Section Line
IC Die
Substrate
Q
JC_2
Figure 6-11. HSBGA Conceptual Drawing
The center balls are connected to the bottom of the die by vias in the package substrate, Figure 6-11. This
gives a low thermal resistance between the die and these balls. Connecting these balls to the PCB ground
planes with a low thermal resistance path is the best way dissipate the heat from the ADC. These pins
should also be connected to the ground plane via a low impedance path for electrical purposes. The direct
connection to the ground planes is an easy method to spread heat away from the ADC. Along with the
ground plane, the parallel power planes will provide additional thermal dissipation.
The center ground balls should be soldered down to the recommended ball pads (See AN-1126). These
balls will have wide traces which in turn have vias which connect to the internal ground planes, and a
bottom ground pad/pour if possible. This ensures a good ground is provided for these balls, and that the
optimal heat transfer will occur between these balls and the PCB ground planes.
In spite of these package enhancements, analysis using the standard JEDEC JESD51-7 four-layer PCB
thermal model shows that ambient temperatures must be limited to 70/77°C to ensure a safe operating
junction temperature for the ADC12D800/500RF. However, most applications using the
ADC12D800/500RF will have a printed circuit board which is more complex than that used in JESD51-7.
Typical circuit boards will have more layers than the JESD51-7 (eight or more), several of which will be
used for ground and power planes. In those applications, the thermal resistance parameters of the
ADC12D800/500RF and the circuit board can be used to determine the actual safe ambient operating
temperature up to a maximum of 85°C.
Three key parameters are provided to allow for modeling and calculations. Because there are two main
thermal paths between the ADC die and external environment, the thermal resistance for each of these
paths is provided. θJC1 represents the thermal resistance between the die and the exposed metal area on
the top of the HSBGA package. θJC2 represents the thermal resistance between the die and the center
group of balls on the bottom of the HSBGA package. The final parameter is the allowed maximum junction
temperature, TJ.
In other applications, a heat sink or other thermally conductive path can be added to the top of the
HSBGA package to remove heat. In those cases, θJC1 can be used along with the thermal parameters for
the heat sink or other thermal coupling added. Representative heat sinks which might be used with the
ADC12D800/500RF include the Cool Innovations p/n 3-1212XXG and similar products from other vendors.
In many applications, the printed circuit board will provide the primary thermal path conducting heat away
from the ADC package. In those cases, θJC2 can be used in conjunction with printed circuit board thermal
modeling software to determine the allowed operating conditions that will maintain the die temperature
below the maximum allowable limit. Additional dissipation can be achieved by coupling a heat sink to the
copper pour area on the bottom side of the printed circuit board.
Typically, dissipation will occur through one predominant thermal path. In these cases, the following
calculations can be used to determine the maximum safe ambient operating temperature for the
ADC12D500RF, for example:
TJ = TA + PD × (θJC+θCA
)
TJ = TA + PC(MAX) × (θJC+θCA
)
Copyright © 2011–2013, Texas Instruments Incorporated
Functional Description
69
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
For θJC, the value for the primary thermal path in the given application environment should be used (θJC1
or θJC2). θCA is the thermal resistance from the case to ambient, which would typically be that of the heat
sink used. Using this relationship and the desired ambient temperature, the required heat sink thermal
resistance can be found. Alternately, the heat sink thermal resistance can be used to find the maximum
ambient temperature. For more complex systems, thermal modeling software can be used to evaluate the
printed circuit board system and determine the expected junction temperature given the total system
dissipation and ambient temperature.
6.4.6 SYSTEM POWER-ON CONSIDERATIONS
There are a couple important topics to consider associated with the system power-on event including
configuration and calibration, and the Data Clock.
6.4.6.1 Power-on, Configuration, and Calibration
Following the application of power to the ADC12D800/500RF, several events must take place before the
output from the ADC12D800/500RF is valid and at full performance; at least one full calibration must be
executed with the device configured in the desired mode.
Following the application of power to the ADC12D800/500RF, there is a delay of tCalDly and then the
Power-on Calibration is executed. This is why it is recommended to set the CalDly Pin via an external pull-
up or pull-down resistor. This ensures that the state of that input will be properly set at the same time that
power is applied to the ADC and tCalDly will be a known quantity. For the purpose of this section, it is
assumed that CalDly is set as recommended.
The Control Bits or Pins must be set or written to configure the ADC12D800/500RF in the desired mode.
This must take place via either Extended Control Mode or Non-ECM (Pin Control Mode) before
subsequent calibrations will yield an output at full performance in that mode. Some examples of modes
include DES/Non-DES Mode, Demux/Non-demux Mode, and Full-Scale Range.
The simplest case is when device is in Non-ECM and the Control Pins are set by pull-up/down resistors,
see Figure 6-12. For this case, the settings to the Control Pins ramp concurrently to the ADC voltage.
Following the delay of tCalDly and the calibration execution time, tCAL, the output of the ADC12D800/500RF
is valid and at full performance. If it takes longer than tCalDly for the system to stabilize at its operating
temperature, it is recommended to execute an on-command calibration at that time.
Another case is when the FPGA configures the Control Pins (Non-ECM) or writes to the SPI (ECM), see
Figure 6-13. It is always necessary to comply with the Operating Ratings and Absolute Maximum ratings,
i.e. the Control Pins may not be driven below the ground or above the supply, regardless of what the
voltage currently applied to the supply is. Therefore, it is not recommended to write to the Control Pins or
SPI before power is applied to the ADC12D800/500RF. As long as the FPGA has completed writing to the
Control Pins or SPI, the Power-on Calibration will result in a valid output at full performance. Once again,
if it takes longer than tCalDly for the system to stabilize at its operating temperature, it is recommended to
execute an on-command calibration at that time.
Due to system requirements, it may not be possible for the FPGA to write to the Control Pins or SPI
before the Power-on Calibration takes place, see Figure 6-14. It is not critical to configure the device
before the Power-on Calibration, but it is critical to realize that the output for such a case is not at its full
performance. Following an On-command Calibration, the device will be at its full performance.
70
Functional Description
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
Pull-up/down
resistors set
Control Pins
Power to
ADC
ADC output
valid
CalDly
Calibration
Power-on
Calibration
On-command
Calibration
Figure 6-12. Power-on with Control Pins set by Pull-up/down Resistors
FPGA writes
Control Pins
Power to
ADC
ADC output
valid
CalDly
Calibration
Power-on
Calibration
On-command
Calibration
Figure 6-13. Power-on with Control Pins set by FPGA pre Power-on Cal
FPGA writes
Control Pins
Power to
ADC
CalDly
Calibration
Power-on
Calibration
On-command
Calibration
Figure 6-14. Power-on with Control Pins set by FPGA post Power-on Cal
6.4.6.2 Power-on and Data Clock (DCLK)
Many applications use the DCLK output for a system clock. For the ADC12D800/500RF, each I- and Q-
channel has its own DCLKI and DCLKQ, respectively. The DCLK output is always active, unless that
channel is powered-down or the DCLK Reset feature is used while the device is in Demux Mode. As the
supply to the ADC12D800/500RF ramps, the DCLK also comes up, see this example from the
ADC12D800RFRB: Figure 6-15. While the supply is too low, there is no output at DCLK. As the supply
continues to ramp, DCLK functions intermittently with irregular frequency, but the amplitude continues to
track with the supply. Much below the low end of operating supply range of the ADC12D800/500RF, the
DCLK is already fully operational.
Copyright © 2011–2013, Texas Instruments Incorporated
Functional Description
71
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
Slope = 1.22V/ms
1900
1710
1490
1210
VA
660
635
520
300
DCLK
time
Figure 6-15. Supply and DCLK Ramping
6.4.7 RECOMMENDED SYSTEM CHIPS
TI recommends these other chips including temperature sensors, clocking devices, and amplifiers in order
to support the ADC12D800/500RF in a system design.
6.4.7.1 Temperature Sensor
The ADC12D800/500RF has an on-die temperature diode connected to pins Tdiode+/- which may be
used to monitor the die temperature. TI also provides a family of temperature sensors for this application
which monitor different numbers of external devices, see Table 6-11.
Table 6-11. Temperature Sensor Recommendation
Number of External Devices Monitored
Recommended Temperature Sensor
1
2
4
LM95235
LM95213
LM95214
The temperature sensor (LM95235/13/14) is an 11-bit digital temperature sensor with a 2-wire System
Management Bus (SMBus) interface that can monitor the temperature of one, two, or four remote diodes
as well as its own temperature. It can be used to accurately monitor the temperature of up to one, two, or
four external devices such as the ADC12D800/500RF, a FPGA, other system components, and the
ambient temperature.
The temperature sensor reports temperature in two different formats for +127.875°C/-128°C range and
0°/255°C range. It has a Sigma-Delta ADC core which provides the first level of noise immunity. For
improved performance in a noisy environment, the temperature sensor includes programmable digital
filters for Remote Diode temperature readings. When the digital filters are invoked, the resolution for the
Remote Diode readings increases to 0.03125°C. For maximum flexibility and best accuracy, the
temperature sensor includes offset registers that allow calibration for other types of diodes.
Diode fault detection circuitry in the temperature sensor can detect the absence or fault state of a remote
diode: whether D+ is shorted to the power supply, D- or ground, or floating.
72
Functional Description
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
In the following typical application, the LM95213 is used to monitor the temperature of an
ADC12D800/500RF as well as an FPGA, see Figure 6-16. If this feature is unused, the Tdiode+/- pins
may be left floating.
7
D1+
I
= I
F
E
100 pF
ADC12D800/500
I
R
5
6
D-
I
E
= I
F
100 pF
FPGA
D2+
I
R
LM95213
Figure 6-16. Typical Temperature Sensor Application
6.4.7.2 Clocking Device
The clock source can be a PLL/VCO device such as the LMX2531LQxxxx family of products. The specific
device should be selected according to the desired ADC sampling clock frequency. The
ADC12D800RFRB uses the LMX2531LQ1570E, with the ADC clock source provided by the Aux PLL
output. Other devices which may be considered based on clock source, jitter cleaning, and distribution
purposes are the LMK01XXX, LMK02XXX, LMK03XXX and LMK04XXX product families.
6.4.7.3 Amplifiers for the Analog Input
The following amplifiers can be used for ADC12D800/500RF applications which require DC coupled input
or signal gain, neither of which can be provided with a transformer coupled input circuit:
Table 6-12. Amplifier Recommendations
Amplifier
LMH6552
LMH6553
LMH6554
LMH6555
Bandwidth
1.5 GHz
900 MHz
2.8 GHz
1.2 GHz
Brief features
Configurable gain
Output clamp and configurable gain
Configurable gain
Fixed gain
6.4.7.4 Balun Recommendations for Analog Input
The following baluns are recommended for the ADC12D800/500RF for applications which require no gain.
When evaluating a balun for the application of driving an ADC, some important qualities to consider are
phase error and magnitude error.
Table 6-13. Balun Recommendations
Balun
Bandwidth
4.5 - 3000MHz
400 - 3000 MHz
30 - 1800 MHz
Mini Circuits TC1-1-13MA+
Anaren B0430J50100A00
Mini Circuits ADTL2-18
Copyright © 2011–2013, Texas Instruments Incorporated
Functional Description
73
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
6.5 Register Definitions
Ten read/write registers provide several control and configuration options in the Extended Control Mode.
These registers have no effect when the device is in the Non-extended Control Mode. Each register
description below also shows the Power-On Reset (POR) state of each control bit. See Table 6-14 for a
summary.
Table 6-14. Register Addresses
A3
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
A2
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
A1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
A0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Hex
0h
1h
2h
3h
4h
5h
6h
7h
8h
9h
Ah
Bh
Ch
Dh
Eh
Fh
Register Addressed
Configuration Register 1
Reserved
I-channel Offset Adjust
I-channel Full-Scale Range Adjust
Calibration Adjust
Calibration Values
Reserved
DES Timing Adjust
Reserved
Reserved
Q-channel Offset Adjust
Q-channel Full-Scale Range Adjust
Aperture Delay Coarse Adjust
Aperture Delay Fine Adjust
AutoSync
Reserved
Table 6-15. Configuration Register 1
Addr: 0h (0000b)
POR state: 2000h
Bit
15
14
DPS
0
13
OVS
1
12
11
PDI
0
10
PDQ
0
9
Res
0
8
Res
0
7
DES
0
6
DEQ
0
5
DIQ
0
4
2SC
0
3
TSE
0
2
SDR
0
1
0
Name CAL
TPM
0
Res
POR
0
0
0
Bit 15
CAL: Calibration Enable. When this bit is set to 1b, an on-command calibration is initiated. This bit is not reset automatically
upon completion of the calibration. Therefore, the user must reset this bit to 0b and then set it to 1b again to execute another
calibration. This bit is logically OR'd with the CAL Pin; both bit and pin must be set to 0b before either is used to execute a
(1)
calibration.
Bit 14
Bit 13
Bit 12
DPS: DCLK Phase Select. In DDR, set this bit to 0b to select the 0° Mode DDR Data-to-DCLK phase relationship and to 1b to
select the 90° Mode. Note that for 1:2 Demux Mode, the Dual Data Rate (DDR) is not available. In SDR, set this bit to 0b to
transition the data on the Rising edge of DCLK; set this bit to 1b to transition the data on the Falling edge of DCLK.
(1)
OVS: Output Voltage Select. This bit sets the differential voltage level for the LVDS outputs including Data, OR, and DCLK. 0b
selects the lower level and 1b selects the higher level. See VOD in Converter Electrical Characteristics Digital Control and
Output Pin Characteristics for details.
TPM: Test Pattern Mode. When this bit is set to 1b, the device will continually output a fixed digital pattern at the digital Data
and OR outputs. When set to 0b, the device will continually output the converted signal, which was present at the analog
inputs. See Test Pattern Mode for details about the TPM pattern.
Bit 11
Bit 10
PDI: Power-down I-channel. When this bit is set to 0b, the I-channel is fully operational; when it is set to 1b, the I-channel is
powered-down. The I-channel may be powered-down via this bit or the PDI Pin, which is active, even in ECM.
PDQ: Power-down Q-channel. When this bit is set to 0b, the Q-channel is fully operational; when it is set to 1b, the Q-channel
is powered-down. The Q-channel may be powered-down via this bit or the PDQ Pin, which is active, even in ECM.
Bit 9
Bit 8
Bit 7
Reserved. Must be set as shown.
Reserved. Must be set as shown.
DES: Dual-Edge Sampling Mode select. When this bit is set to 0b, the device will operate in the Non-DES Mode; when it is set
to 1b, the device will operate in the DES Mode. See DES/Non-DES Mode for more information.
(1) This pin/bit functionality is not tested in production test; performance is tested in the specified/default mode only.
74 Functional Description
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
Bit 6
SNAS502E –JULY 2011–REVISED MARCH 2013
DEQ: DES Q-input select, a.k.a. DESQ Mode. When the device is in DES Mode, this bit selects the input that the device will
operate on. The default setting of 0b selects the I-input and 1b selects the Q-input.
Bit 5
DIQ: DES I- and Q-input, a.k.a. DESIQ Mode. When in DES Mode, setting this bit to 1b shorts the I- and Q-inputs internally to
the device. If the bit is left at its default 0b, the I- and Q-inputs remain electrically separate. In this mode, both the I- and Q-
inputs must be externally driven; see DES/Non-DES Mode for more information.(1)
The allowed DES Modes settings are shown below. For DESCLKIQ Mode, see Addr Eh.
Mode
Addr 0h, Bit<7:5>
000b
Addr Eh, Bit<6>
Non-DES Mode
DESI Mode
0b
0b
0b
0b
1b
100b
DESQ Mode
DESIQ Mode
DESCLKIQ Mode
110b
101b
000b
Bit 4
Bit 3
Bit 2
2SC: Two's Complement output. For the default setting of 0b, the data is output in Offset Binary format; when set to 1b, the
data is output in Two's Complement format.(1)
TSE: Time Stamp Enable. For the default setting of 0b, the Time Stamp feature is not enabled; when set to 1b, the feature is
enabled. See Output Control and Adjust for more information about this feature.(2)
SDR: Single Data Rate. For the default setting of 0b, the data is clocked in Dual Data Rate; when set to 1b, the data is clocked
in Single Data Rate. See Output Control and Adjust for more information about this feature. Note that for DDR Mode, the 1:2
Demux Mode is not available. See Table 6-5 for a selection of available modes.
Bits 1:0
Reserved. Must be set as shown.
(2) This pin/bit functionality is not tested in production test; performance is tested in the specified/default mode only.
Table 6-16. Reserved
Addr: 1h (0001b)
POR state: 2907h
Bit
15
14
0
13
1
12
0
11
1
10
0
9
0
8
1
7
0
6
0
5
0
4
0
3
0
2
1
1
0
Name
POR
Res
0
1
1
Bits 15:0
Reserved. Must be set as shown.
Table 6-17. I-channel Offset Adjust
Addr: 2h (0010b)
POR state: 0000h
Bit
15
14
Res
0
13
0
12
OS
0
11
0
10
0
9
0
8
0
7
0
6
5
4
0
3
0
2
0
1
0
Name
POR
OM(11:0)
0
0
0
0
0
Bits
15:13
Reserved. Must be set to 0b.
OS: Offset Sign. The default setting of 0b incurs a positive offset of a magnitude set by Bits 11:0 to the ADC output. Setting this bet
to 1b incurs a negative offset of the set magnitude.
Bit 12
OM(11:0): Offset Magnitude. These bits determine the magnitude of the offset set at the ADC output (straight binary coding). The
range is from 0 mV for OM(11:0) = 0d to 45 mV for OM(11:0) = 4095d in steps of ~11 µV. Monotonicity is specified by design only
for the 9 MSBs.
Bits
11:0
Code
Offset [mV]
0000 0000 0000 (default)
1000 0000 0000
1111 1111 1111
0
22.5
45
Table 6-18. I-channel Full Scale Range Adjust
Addr: 3h (0011b)
Bit 15
Name Res
POR
POR state: 4000h
14
1
13
0
12
0
11
0
10
0
9
0
8
0
7
FM(14:0)
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
0
Copyright © 2011–2013, Texas Instruments Incorporated
Functional Description
75
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
Bit 15
Reserved. Must be set to 0b.
Bits 14:0
FM(14:0): FSR Magnitude. These bits increase the ADC full-scale range magnitude (straight binary coding.) The range is from
600 mV (0d) to 1000 mV (32767d) with the default setting at 800 mV (16384d). Monotonicity is specified by design only for the
9 MSBs. The mid-range (low) setting in ECM corresponds to the nominal (low) setting in Non-ECM. A greater range of FSR
values is available in ECM, i.e. FSR values above 800 mV. See VIN_FSR in Converter Electrical Characteristics Analog
Input/Output and Reference Characteristics for characterization details.
Code
FSR [mV]
600
000 0000 0000 0000
100 0000 0000 0000 (default)
111 1111 1111 1111
800
1000
Table 6-19. Calibration Adjust(1)
Addr: 4h (0100b)
Bit 15
Name Res
POR
POR state: DB4Bh
14
CSS
1
13
0
12
1
11
1
10
0
9
1
8
1
7
SSC
0
6
1
5
0
4
0
3
Res
1
2
0
1
0
Res
1
1
1
(1) This feature functionality is not tested in production test; performance is tested in the specified/default mode only.
Bit 15
Bit 14
Reserved. Must be set as shown.
CSS: Calibration Sequence Select. The default 1b selects the following calibration sequence: reset all previously calibrated
elements to nominal values, do RIN Calibration, do internal linearity Calibration. Setting CSS = 0b selects the following
calibration sequence: do not reset RIN to its nominal value, skip RIN calibration, do internal linearity Calibration. The calibration
must be completed at least one time with CSS = 1b to calibrate RIN. Subsequent calibrations may be run with CSS = 0b (skip
RIN calibration) or 1b (full RIN and internal linearity Calibration).
Bits 13:8
Bit 7
Reserved. Must be set as shown.
SSC: SPI Scan Control. Setting this control bit to 1b allows the calibration values, stored in Addr: 5h, to be read/written. When
not reading/writing the calibration values, this control bit should left at its default 0b setting. See Calibration Feature for more
information.
Bits 6:0
Reserved. Must be set as shown.
Table 6-20. Calibration Values(1)
Addr: 5h (0101b)
POR state: XXXXh
Bit
15
14
X
13
X
12
X
11
X
10
X
9
8
7
6
5
4
3
2
1
0
Name
POR
SS(15:0)
X
X
X
X
X
X
X
X
X
X
X
(1) This feature functionality is not tested in production test; performance is tested in the specified/default mode only.
Bits 15:0
SS(15:0): SPI Scan. When the ADC performs a self-calibration, the values for the calibration are stored in this register and may
be read from/ written to it. Set SSC (Addr: 4h, Bit 7) to read/write. See Calibration Feature for more information.
Table 6-21. Reserved - ADC12D800RF
Addr: 6h (0110b)
POR state: 1C2Eh
Bit
15
14
0
13
0
12
1
11
1
10
1
9
0
8
0
7
0
6
0
5
1
4
0
3
1
2
1
1
0
Name
POR
Res
0
1
0
Bits 15:0
Reserved. Must be set as shown.
Table 6-22. Reserved - ADC12D500RF
Addr: 6h (0110b)
POR state: 1C6Eh
Bit
15
14
0
13
0
12
1
11
1
10
1
9
0
8
0
7
0
6
1
5
1
4
0
3
1
2
1
1
0
Name
POR
Res
0
1
0
76
Functional Description
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
Bits 15:0
Reserved. Must be set as shown. Although Bits 6 and 5 may be written to / read from the Control Registers, its final internal
value is set in hardware.
Table 6-23. DES Timing Adjust(1)
Addr: 7h (0111b)
POR state: 8142h
Bit
15
14
0
13
0
12
DTA(6:0)
0
11
0
10
0
9
0
8
1
7
0
6
1
5
0
4
Res
0
3
0
2
0
1
0
Name
POR
1
1
0
(1) This feature functionality is not tested in production test; performance is tested in the specified/default mode only.
Bits 15:9
DTA(6:0): DES Mode Timing Adjust. In the DES Mode, the time at which the falling edge sampling clock samples relative to
the rising edge of the sampling clock may be adjusted; the automatic duty cycle correction continues to function. See Input
Control and Adjust for more information. The nominal step size is 30fs.
Bits 8:0
Reserved. Must be set as shown.
Table 6-24. Reserved
Addr: 8h (1000b)
POR state: 0F0Fh
Bit
15
14
0
13
0
12
0
11
1
10
1
9
1
8
1
7
0
6
0
5
0
4
0
3
1
2
1
1
0
Name
POR
Res
0
1
1
Bits 15:0
Reserved. Must be set as shown.
Table 6-25. Reserved
Addr: 9h (1001b)
POR state: 0000h
Bit
15
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
Name
POR
Res
0
0
0
Bits 15:0
Reserved. Must be set as shown.
Table 6-26. Q-channel Offset Adjust
Addr: Ah (1010b)
POR state: 0000h
Bit
15
14
Res
0
13
0
12
OS
0
11
0
10
0
9
0
8
0
7
0
6
5
4
0
3
0
2
0
1
0
Name
POR
OM(11:0)
0
0
0
0
0
Bits 15:13 Reserved. Must be set to 0b.
Bit 12
OS: Offset Sign. The default setting of 0b incurs a positive offset of a magnitude set by Bits 11:0 to the ADC output. Setting
this bet to 1b incurs a negative offset of the set magnitude.
Bits 11:0
OM(11:0): Offset Magnitude. These bits determine the magnitude of the offset set at the ADC output (straight binary coding).
The range is from 0 mV for OM(11:0) = 0d to 45 mV for OM(11:0) = 4095d in steps of ~11 µV. Monotonicity is specified by
design only for the 9 MSBs.
Code
Offset [mV]
0000 0000 0000 (default)
1000 0000 0000
1111 1111 1111
0
22.5
45
Copyright © 2011–2013, Texas Instruments Incorporated
Functional Description
77
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
Table 6-27. Q-channel Full-Scale Range Adjust
Addr: Bh (1011b)
Bit 15
Name Res
POR state: 4000h
14
1
13
0
12
0
11
0
10
0
9
0
8
0
7
FM(14:0)
0
6
0
5
0
4
0
3
0
2
0
1
0
POR
0
0
0
Bit 15
Reserved. Must be set to 0b.
Bits 14:0
FM(14:0): FSR Magnitude. These bits increase the ADC full-scale range magnitude (straight binary coding.) The range is from
600 mV (0d) to 1000 mV (32767d) with the default setting at 800 mV (16384d). Monotonicity is specified by design only for the
9 MSBs. The mid-range (low) setting in ECM corresponds to the nominal (low) setting in Non-ECM. A greater range of FSR
values is available in ECM, i.e. FSR values above 800 mV. See VIN_FSR in Converter Electrical Characteristics Analog
Input/Output and Reference Characteristics for characterization details.
Code
FSR [mV]
600
000 0000 0000 0000
100 0000 0000 0000 (default)
111 1111 1111 1111
800
1000
Table 6-28. Aperture Delay Coarse Adjust
Addr: Ch (1100b)
POR state: 0004h
Bit
15
14
0
13
0
12
0
11
0
10
9
8
0
7
0
6
0
5
0
4
0
3
STA
0
2
DCC
1
1
0
Name
POR
CAM(11:0)
Res
0
0
0
0
0
Bits 15:4
CAM(11:0): Coarse Adjust Magnitude. This 12-bit value determines the amount of delay that will be applied to the input CLK
signal. The range is 0 ps delay for CAM(11:0) = 0d to a maximum delay of 825 ps for CAM(11:0) = 2431d (±95 ps due to PVT
variation) in steps of ~340 fs. For code CAM(11:0) = 2432d and above, the delay saturates and the maximum delay applies.
Additional, finer delay steps are available in register Dh. Either STA (Bit 3) or SA (Addr: Dh, Bit 8) must be selected to enable
this function.
Bit 3
STA: Select tAD Adjust. Set this bit to 1b to enable the tAD adjust feature, which will make both coarse and fine adjustment
settings, i.e. CAM(11:0) and FAM(5:0), available.
Bit 2
DCC: Duty Cycle Correct. This bit can be set to 0b to disable the automatic duty-cycle stabilizer feature of the chip. This
feature is enabled by default.
Bits 1:0
Reserved. Must be set to 0b.
Table 6-29. Aperture Delay Fine Adjust
Addr: Dh (1101b)
POR state: 0000h
Bit
15
14
0
13
12
0
11
0
10
0
9
Res
0
8
SA
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
Name
POR
FAM(5:0)
Res
0
0
0
0
Bits 15:10 FAM(5:0): Fine Aperture Adjust Magnitude. This 6-bit value determines the amount of additional delay that will be applied to
the input CLK when the Clock Phase Adjust feature is enabled via STA (Addr: Ch, Bit 3) or SA (Addr: Dh, Bit 8). The range is
straight binary from 0 ps delay for FAM(5:0) = 0d to 2.3 ps delay for FAM(5:0) = 63d (±300 fs due to PVT variation) in steps of
~36 fs.
Bit 9
Bit 8
Reserved. Must be set to 0b.
SA: Select tAD Adjust. Set this bit to 1b to enable the tAD adjust feature. This bit is the same as STA (Addr: Ch, Bit 3), except
that if SA is enabled, then the value of the STA bit is ignored.
Bits 7:0
Reserved. Must be set as shown.
78
Functional Description
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
www.ti.com
SNAS502E –JULY 2011–REVISED MARCH 2013
Table 6-30. AutoSync(1)
Addr: Eh (1110b)
POR state: 0003h
Bit
15
14
0
13
0
12
0
11
DRC(8:0)
0
10
0
9
0
8
0
7
0
6
DCK
0
5
Res
0
4
3
0
2
ES
0
1
DOC
1
0
DR
1
Name
POR
SP(1:0)
0
0
(1) This feature functionality is not tested in production test; performance is tested in the specified/default mode only.
Bits 15:7
DRC(8:0): Delay Reference Clock (8:0). These bits may be used to increase the delay on the input reference clock when
synchronizing multiple ADCs. The delay may be set from a minimum of 0s (0d) to a maximum of 1200 ps (319d). The delay
remains the maximum of 1200 ps for any codes above or equal to 319d. See SYNCHRONIZING MULTIPLE
ADC12D800/500RFS IN A SYSTEM for more information.
Bit 6
DCK: DESCLKIQ Mode. Set this bit to 1b to enable Dual-Edge Sampling, in which the Sampling Clock samples the I- and Q-
channels 180º out of phase with respect to one another, i.e. the DESCLKIQ Mode. To select the DESCLKIQ Mode, Addr: 0h,
Bits <7:5> must also be set to 000b. See Input Control and Adjust for more information.(1)
Bit 5
Reserved. Must be set as shown.
Bits 4:3
SP(1:0): Select Phase. These bits select the phase of the reference clock which is latched. The codes correspond to the
following phase shift:
00 = 0°
01 = 90°
10 = 180°
11 = 270°
Bit 2
Bit 1
Bit 0
ES: Enable Slave. Set this bit to 1b to enable the Slave Mode of operation. In this mode, the internal divided clocks are
synchronized with the reference clock coming from the master ADC. The master clock is applied on the input pins RCLK. If this
bit is set to 0b, then the device is in Master Mode.
DOC: Disable Output reference Clocks. Setting this bit to 0b sends a CLK/4 signal on RCOut1 and RCOut2. The default
setting of 1b disables these output drivers. This bit functions as described, regardless of whether the device is operating in
Master or Slave Mode, as determined by ES (Bit 2).
DR: Disable Reset. The default setting of 1b leaves the DCLK_RST functionality disabled. Set this bit to 0b to enable
DCLK_RST functionality.
(1) This feature functionality is not tested in production test; performance is tested in the specified/default mode only.
Table 6-31. Reserved
Addr: Fh (1111b)
POR state: 001Dh
Bit
15
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
1
3
1
2
1
1
0
Name
POR
Res
0
0
1
Bits 15:0
Reserved. This address is read only.
Copyright © 2011–2013, Texas Instruments Incorporated
Functional Description
79
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
ADC12D500RF, ADC12D800RF
SNAS502E –JULY 2011–REVISED MARCH 2013
www.ti.com
Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Revision D (March 2013) to Revision E
Page
•
Changed layout of National Data Sheet to TI format .......................................................................... 74
80
Functional Description
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: ADC12D500RF ADC12D800RF
PACKAGE OPTION ADDENDUM
www.ti.com
18-Oct-2013
PACKAGING INFORMATION
Orderable Device
Status Package Type Package Pins Package
Eco Plan
Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
Device Marking
Samples
Drawing
Qty
(1)
(2)
(6)
(3)
(4/5)
ADC12D500RFIUT
ACTIVE
BGA
BGA
NXA
292
292
40
TBD
Call TI
Call TI
-40 to 85
-40 to 85
ADC12D500RFIUT
ADC12D500RFIUT
ADC12D500RFIUT/NOPB
ACTIVE
NXA
40
Green (RoHS NI/AU | POST-PLATE Level-3-250C-168 HR
& no Sb/Br)
ADC12D800RFIUT
ACTIVE
ACTIVE
BGA
BGA
NXA
NXA
292
292
40
40
TBD
Call TI
Call TI
-40 to 85
-40 to 85
ADC12D800RFIUT
ADC12D800RFIUT
ADC12D800RFIUT/NOPB
Green (RoHS NI/AU | POST-PLATE Level-3-250C-168 HR
& no Sb/Br)
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
18-Oct-2013
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
MECHANICAL DATA
NXA0292A
www.ti.com
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/industrial
www.ti.com/medical
Medical
Logic
Security
www.ti.com/security
Power Mgmt
Microcontrollers
RFID
power.ti.com
Space, Avionics and Defense
Video and Imaging
www.ti.com/space-avionics-defense
www.ti.com/video
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/omap
OMAP Applications Processors
Wireless Connectivity
TI E2E Community
e2e.ti.com
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated
相关型号：
ADC12DJ1600
ADC12xJ1600 Quad, Dual, or Single Channel 1.6-GSPS, 12-Bit, Analog-to-Digital Converter (ADC) with JESD204C Interface
TI
©2020 ICPDF网 联系我们和版权申明