MADR-008888-0001TB [TE]
PIN Diode Driver for Series / Series High Power Switch; PIN二极管驱动器的系列/系列高功率开关型号: | MADR-008888-0001TB |
厂家: | TE CONNECTIVITY |
描述: | PIN Diode Driver for Series / Series High Power Switch |
文件: | 总5页 (文件大小:138K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MADR-008888-000100
PIN Diode Driver for Series / Series High Power Switch
Rev. V4
Pin Configuration
Features
Pin No.
Pin Name
Pin No.
Pin Name
•
•
•
•
•
•
•
•
•
•
High Drive Current Capability (± 50 mA)
27V Back Bias in Off State
Switching Speed Approximately 1.5 µs
Low Current Consumption
Land Grid Array Package for SMT Applications
Tape and Reel Packaging Available
Lead-Free Package
260°C Reflow Compatible
RoHS* Compliant
Single CMOS Logic input
1
2
3
4
VCC (+5V)
GND
13
14
15
16
GND
NC
C1 (Logic)
GND
GND
TX Drive
5
6
7
8
VDD (+28V)
GND
17
18
19
20
GND
GND
GND
GND
GND
GND
Description
9
GND
RX Drive
GND
21
22
23
-
GND
GND
GND
-
M/A-COM’s MADR-008888-000100 Switch
Driver is designed to work with M/A-COM switch
MASW-000823-12770T or other series / series
switches. This driver is design to provide currents
up to 50 mA for each diode in series / series
switches. It is designed for SPDT switches that op-
erate with a power range of approximately 5 – 20W
CW. The driver is packaged in a Land Grid Array
surface mount package and is available in tape and
reel packaging for high volume applications. The
MADR-008888-000100 driver is ideally suited for
driving M/A-COM’s line of HMIC switches.
10
11
12
NC
Absolute Maximum Ratings 2,3
Parameter
Absolute Maximum
VCC (+5V)
-0.5V to +6.5V
Note that this driver will also operate when
VDD (+28V)
-0.5V to 40V
VDD is set to voltages other than +28V. It could also
operate at +12V, +15V, +20V, and +24V supplies.
C1 (Logic)
-0.5V to 6.5 V
60 mA
RX Drive Current
TX Drive Current
60 mA
Power Dissipation in Still Air
Operational Temperature
100 mW
Ordering Information 1
-40 to +85°C
Storage Temperature
-55 to +125°C
Part Number
Package
MADR-008888-000100
MADR-008888-0001TR
Bulk Packaging
300 piece Reel
Truth Table (Switch)
Condition of Switch
Sample Board with Driver &
MASW-000823-12770T Switch
Control Input
MADR-008888-0001TB
RF Common to Each RF Port
C1
0
TX
Off
On
RX
On
Off
1. Reference Application Note M513 for reel size information.
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
1
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MADR-008888-000100
PIN Diode Driver for Series / Series High Power Switch
Rev. V4
Electrical Specifications: TA = +25°C, +VCC = +5.0 V, VDD = +28 V
Parameter
Test Conditions
Unit
Min
Typ
Max
DC Output Current
RX Current 4
TX Current 4
Assumes 1V Drop on PIN Diode
Assumes 1V Drop on PIN Diode
mA
mA
—
—
22 or 35
22 or 35
50
50
Back Bias Voltage on
TX Diode
RX ON
TX ON
V
V
—
—
27
27
—
—
RX Diode
Switching Speed: ANT-TX5
50% CTL to 90% Voltage
50% CTL to 10% Voltage
10% - 90%
µs
µs
ns
ns
—
—
—
—
0.9
1.5
250
300
2.06
2.06
—
Ton
Toff
Trise
Tfall
90% - 10%
—
Switching Speed: ANT-RX5
50% CTL to 90% Voltage
50% CTL to 10% Voltage
10% - 90%
µs
µs
ns
ns
—
—
—
—
1.5
0.9
200
250
2.06
2.06
—
Ton
Toff
Trise
Tfall
90% - 10%
—
PRF
50% duty cycle
KHz
DC
—
50
VCC (+5V)
VDD (+28V)
mA
mA
—
—
—
—
0.1
5.0
Quiescent Supply Currents
Logic “0” @ 20 µA sink current
Logic “1” @ 0.5 mA source current
V
V
0.0
3.5
0.0
5.0
1.5
5.0
Logic Levels
Supply Currents4
ICC
R1 = 80 Ω
R1 = 110 Ω
R1 = 180 Ω
R1 = N/A
mA
mA
mA
mA
—
—
—
—
51
36
23
2.5
—
—
—
—
IDD
4. Currents are user selectable. Reference “Driver and SPDT Schematic” for suggested values. R1 should be ≥ 80 ohms for VCC= 5.0V.
R1 should be ≥ 65 ohms for VCC = 3.3V.
5. Switch parameters were measured when driving the MASW-000823-12770T switch.
6. Maximums are for load currents up to 25mA
Recommended Operating Conditions
Parameter
Test Conditions
Unit
Min
Typ
Max
Nominal VCC = 3.3 V
Nominal VCC = 5.0 V
V
V
3.0
4.5
3.3
5.0
3.6
5.5
VCC
VDD
Input Voltage
V
27.0
28.0
29.0
VCC = 3.0 V to 3.6V
VCC = 4.5 V to 5.5 V
VCC = 3.0 V to 3.6V
VCC = 4.5 V to 5.5 V
V
V
V
V
0.0
0.0
2
0.0
0.0
VCC
VCC
0.8
0.3 x VCC
VCC
C1 (Low Level Input Voltage)
C1 (High Level Input Voltage)
0.7 x VCC
VCC
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Moisture Sensitivity
Silicon Circuits are sensitive to electrostatic
discharge (ESD) and can be damaged by static
electricity. Proper ESD control techniques should
be used when handling these devices.
The MSL rating for this part is defined as Level 3
per IPC/JEDEC J-STD-020. Parts shall be stored
and/or baked as required for MSL Level 3 parts.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MADR-008888-000100
PIN Diode Driver for Series / Series High Power Switch
Rev. V4
Typical Performance Curves
TX On, 50 mA Load Current
TX On, 20 mA Load Current
-40ºC
+25ºC
+25ºC
-40ºC
5
4
3
2
5
4
3
2
+85ºC
+85ºC
1
1
0
0
-0.5 0.0 0.5 1.0
1.5 2.0 2.5 3.0 3.5 4.0 4.5
-0.5 0.0 0.5
1.0
1.5
2.0 2.5
3.0 3.5
4.0 4.5
4.0 4.5
4.0 4.5
Ti m e (µs )
Ti m e ( µs )
TX Off, 50 mA Load Current
TX Off, 20 mA Load Current
5
4
3
2
5
4
3
2
+25ºC
+85ºC
+25ºC
+85ºC
-40ºC
1
-40ºC
1
0
0
-0.5 0.0 0.5 1.0
1.5 2.0 2.5 3.0 3.5 4.0 4.5
-0.5 0.0 0.5
1.0
1.5
2.0 2.5
3.0 3.5
Ti m e ( µs )
Ti m e (µs )
RX On, 50 mA Load Current
RX On, 20 mA Load Current
-40ºC
+25ºC
+25ºC
5
4
3
2
5
4
3
2
1
0
-40ºC
+85ºC
+85ºC
1
0
-0.5 0.0 0.5
1.0
1.5
2.0 2.5
3.0 3.5
-0.5 0.0 0.5 1.0
1.5 2.0 2.5 3.0 3.5 4.0 4.5
Ti m e ( u s )
Ti m e (µs )
RX Off, 50 mA Load Current
RX Off, 20 mA Load Current
5
4
3
5
4
3
+25ºC
+85ºC
+25ºC
+85ºC
2
2
-40ºC
-40ºC
1
0
1
0
-0.5 0.0 0.5 1.0
1.5 2.0 2.5 3.0 3.5 4.0 4.5
-0.5 0.0 0.5
1.0
1.5
2.0 2.5
3.0 3.5
4.0 4.5
Ti m e ( µs )
Ti m e (µs )
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MADR-008888-000100
PIN Diode Driver for Series / Series High Power Switch
Rev. V4
Driver and SPDT Schematic with +5V & +28V DC Power 7,8,9,10,11,12,13,14
ANT
C3
100 pF
L1
27 nH
R1
See Note 8
+5V
C4
100 pF
C5
100 pF
TX
RX
C1
C2
100 pF
100V
100 pF
100V
L3
27 nH
L2
27 nH
SPDT
+28V
+5V
Cbypass
12 pF
Cbypass
12 pF
MADR-008888-000100
Switch Driver
Logic
Input
Ground
7. Forward Bias Diode Voltage: ΔVf is 0.9V @ 22 mA; ΔVf is 1.0V @ 35 mA
8. For 22 mA load current, R1 = 180 Ω @ VCC = 5.0V and 105 Ω @ VCC = 3.3V. For 35 mA load cur-
rent, R1 = 110 Ω @ VCC = 5.0V and 165 Ω @ VCC= 3.3V. Nominal power dissipation in the 180 Ω
and 110 Ω resistors are 87 mW and 135 mW.
9. Reverse Bias is ~ 27V (This is the 28V supply minus approximately 1V on the diode).
10. M/A-COM PIN Diode Driver, MADR-008888-0001TR is recommended for usage with the MASW-
000823-12770T SPDT Switch.
11. The voltage at the common anode will be approximately 1.0V.
12. The current in through the back-biased diodes will be the leakage current for the diodes
13. C1-C5, L1-L3, R1, and the switch are discrete components that should be installed on the user’s
board. It is recommended that Coilcraft 0603CS-27NXJLW or equivalent be used for L1-L3 at 2 GHz
(values may vary based on the frequency).
14. There are 33 pF bypass capacitors included in the driver for the RX and TX ports. There are cases,
especially at higher frequencies, where the optional 12 pF bypass capacitors that are shown on the
schematic are needed.
4
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MADR-008888-000100
PIN Diode Driver for Series / Series High Power Switch
Rev. V4
Lead-Free Land Grid Array, 0.64 in x 0.84 in †
†
Reference Application Note M538 for lead-free solder reflow recommendations.
Meets JEDEC moisture sensitivity level 3 requirements.
5
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
相关型号:
©2020 ICPDF网 联系我们和版权申明