MADR-008851-000100 [TE]
PIN Diode Driver for Series / Shunt High Power Switches; PIN二极管驱动器的串联/并联大功率开关型号: | MADR-008851-000100 |
厂家: | TE CONNECTIVITY |
描述: | PIN Diode Driver for Series / Shunt High Power Switches |
文件: | 总6页 (文件大小:104K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MADR-008851-000100
PIN Diode Driver for Series / Shunt High Power Switches
Rev. V1P
Features
Pin Configuration
High Drive Current Capability (Up to 50 mA)
Up to 32V Back Bias in Off State
Single CMOS Logic Input
Fast Switching
Low Current Consumption
Land Grid Array Package for SMT Applications
260°C Reflow Compatible
Pin No.
Pin Name
Pin No.
Pin Name
1
2
3
4
VCC
GND
13
14
15
16
GND
SH2
C1 (Logic)
GND
GND
RX Drive
RoHS* Compliant
Tape and Reel Packaging Available
5
6
7
8
VDD
GND
GND
GND
17
18
19
20
GND
GND
GND
GND
Description
M/A-COM’s MADR-008851-000100 Switch Driver is
designed to work with M/A-COM’s line of series /
shunt SPDT HMIC switches which operate in the
power range of approximately 5 to 20W CW. It is
capable to provide forward bias currents up to 50
mA for each diode in the series/shunt switch, with
back bias voltage configurable from 12V to 32 V. It is
packaged in a Land Grid Array surface mount
package and is available in tape and reel packaging
for high volume applications.
9
GND
TX Drive
GND
21
22
23
-
GND
GND
GND
-
10
11
12
SH1
Sample boards are available with M/A-COM 20W
switch MASW-000834-13560T.
Handling Procedures
Please observe the following precautions to avoid
damage:
Ordering Information 1
Part Number
Package
Static Sensitivity
MADR-008851-000100
Bulk Packaging
Silicon Circuits are sensitive to electrostatic
discharge (ESD) and can be damaged by static
electricity. Proper ESD control techniques should
be used when handling these devices.
MADR-008851-0001TR
MADR-008851-0001TB
300 piece Reel
Sample Board with Driver &
MASW-000834-13560T Switch
1. Reference Application Note M513 for reel size information.
Moisture Sensitivity
The MSL rating for this part is defined as Level 3
per IPC/JEDEC J-STD-020. Parts shall be stored
and/or baked as required for MSL Level 3 parts.
* Restrictions on Hazardous Substances, European Union Directive
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MADR-008851-000100
PIN Diode Driver for Series / Shunt High Power Switches
Rev. V1P
Recommended Operating Conditions
Parameter
Test Conditions
Unit
Min
Typ
Max
Nominal VCC = 3.3 V
Nominal VCC = 5.0 V
V
V
3.0
4.5
3.3
5.0
3.6
5.5
VCC
VDD
Input Voltage
V
12.0
—
28.0
—
32.0
50
TX Series Diode Bias Current2
RX Series Diode Bias Current2
VDD = 12 V to 32 V
VDD = 12 V to 32 V
mA
mA
—
—
50
VDD = 12 V to 20 V
VDD = 20 V to 32 V
mA
mA
—
—
—
—
35
50
Shunt Diode Bias Current3
C1 (Low Level Input Voltage)
C1 (High Level Input Voltage)
PRF
VCC = 3.0 V to 3.6V
VCC = 4.5 V to 5.5 V
V
V
0.0
0.0
0.0
0.0
0.8
0.3 x VCC
VCC = 3.0 V to 3.6V
VCC = 4.5 V to 5.5 V
V
V
2.0
0.7 x VCC
VCC
VCC
VCC
VCC
50% duty cycle
KHz
DC
—
50
2. TX and RX currents are user selectable. Reference “Driver and SPDT Schematic” for suggested values.
3. A resistor needs to be connected between SH1 and SH2 to set the shunt diode bias current. Reference “Driver and SPDT Schematic” for
suggested values.
Absolute Maximum Ratings 4,5
Truth Table
Parameter
Absolute Maximum
Control
Input
Condition of
Switch
VCC (+5V)
-0.5 V to +6.5 V
-0.5 V to 40 V
Condition of Driver
VDD (+28V)
TX
RX
SH
C1 (Logic)
-0.5 V to 6.5 V
60 mA
C1
TX
RX
Voltage Voltage Current
RX Sinking Current
TX Sinking Current
60 mA
0
1
High
Low
Low
Low
Off
On
On
Off
Power Dissipation in Still Air
Operational Temperature
100 mW
High
High
-40 to +85°C
Storage Temperature
-55 to +125°C
4. Exceeding any one or combination of these limits may cause
permanent damage to this device.
5. M/A-COM does not recommend sustained operation near
these survivability limits.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MADR-008851-000100
PIN Diode Driver for Series / Shunt High Power Switches
Rev. V1P
DC Characteristics : TA = +25C, VCC = 3.0 to 5.5 V, VDD = 12 to 28 V
Parameter
Quiescent VCC Supply Current
Quiescent VDD Supply Current
Test Conditions
Unit
Min
Typ
Max
—
—
—
nA
—
50
mA
—
0.8
—
Output Back Bias Voltage
RX
TX
SH1
TX ON
RX ON
RX ON
V
V
V
—
—
—
VDD - 0.5
VDD
VDD - 0.5
—
—
—
Output Resistance
RX
TX
RX ON
TX ON
Ω
Ω
—
—
22.5
22.5
—
—
Switching Speed When Driving 50 pF Capacitive Loads6:
Typical Performance
Testing Conditions
Symbol
Parameter
Unit
-40°C
+25°C
85°C
Switching Speed: TX
50% CTL to 90% Voltage
50% CTL to 10% Voltage
10% - 90%
ns
ns
ns
ns
200
350
180
200
330
420
320
250
500
500
480
320
TPLH
TPHL
Tr
90% - 10%
Tf
VCC = +5.0 V
VDD = +28 V
ISERIES = 50 mA
Switching Speed: RX
50% CTL to 90% Voltage
50% CTL to 10% Voltage
10% - 90%
ns
ns
ns
ns
200
360
180
220
350
430
330
280
520
520
500
350
TPLH
TPHL
Tr
90% - 10%
Tf
Switching Speed: TX
50% CTL to 90% Voltage
50% CTL to 10% Voltage
10% - 90%
ns
ns
ns
ns
200
530
180
300
400
580
370
320
570
630
550
360
TPLH
TPHL
Tr
90% - 10%
Tf
VCC = +3.3 V
VDD = +12 V
I
SERIES = 50 mA
Switching Speed: RX
50% CTL to 90% Voltage
50% CTL to 10% Voltage
10% - 90%
ns
ns
ns
ns
200
600
180
330
400
640
390
360
580
700
570
400
TPLH
TPHL
Tr
90% - 10%
Tf
6. Switching parameters for the shunt output are not listed since they can only be measured with a diode switch.
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MADR-008851-000100
PIN Diode Driver for Series / Shunt High Power Switches
Rev. V1P
Switching Speed When Driving M/A-COM MASW-000834-13560T Switch7:
Typical Performance
Testing Conditions
Symbol
Parameter
Unit
-40°C
+25°C
85°C
TX Series Diode
50% CTL to 90% RF
50% CTL to 10% RF
10% - 90% RF
ns
ns
ns
ns
250
400
80
450
520
200
250
600
600
300
300
TON
TOFF
Tr
90% - 10% RF
200
Tf
RX Series Diode
VCC = +5.0 V
VDD = +28 V
50% CTL to 90% RF
50% CTL to 10% RF
10% - 90% RF
ns
ns
ns
ns
370
220
150
80
600
300
300
120
840
350
500
160
TON
TOFF
Tr
I
SERIES = 50 mA
I
SHUNT = 50 mA
90% - 10% RF
Tf
RX Shunt Diode
50% CTL to 90% Current
50% CTL to 10% Current
10% - 90% Current
ns
ns
ns
ns
480
100
470
90
550
100
540
90
620
100
610
90
TON
TOFF
Tr
90% - 10% Current
Tf
TX Series Diode
50% CTL to 90% RF
50% CTL to 10% RF
10% - 90% RF
ns
ns
ns
ns
460
630
280
400
620
770
300
350
820
900
340
320
TON
TOFF
Tr
90% - 10% RF
Tf
RX Series Diode
VCC = +3.3 V
VDD = +12 V
50% CTL to 90% RF
50% CTL to 10% RF
10% - 90% RF
ns
ns
ns
ns
630
470
400
280
880
550
450
200
1200
650
550
200
TON
TOFF
Tr
ISERIES = 50 mA
SHUNT = 35 mA
I
90% - 10% RF
Tf
RX Shunt Diode
50% CTL to 90% Current
50% CTL to 10% Current
10% - 90% Current
ns
ns
ns
ns
860
100
850
90
850
100
840
90
900
100
880
90
TON
TOFF
Tr
90% - 10% Current
Tf
7. Switching parameters were measured with a 10 dBm, 2 GHz RF input.
4
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MADR-008851-000100
PIN Diode Driver for Series / Shunt High Power Switches
Rev. V1P
Driver and SPDT Schematic for 2 GHz Applciations8,9,10,11,12,13,14
ANT
C3
27 pF
100V
L1
27 nH
R1
See Note 9
VCC
C4
1000 pF
C5
0.022 uF
TX Voltage
RX Voltage
TX
RX
C1
C2
27 pF
100V
27 pF
100V
SPDT
L2
27 nH
L3
27 nH
C8
20 pF
Note 11
VDD
VCC
L4
27 nH
C6
33 pF
C7
33 pF
TX
RX
SH Current
Logic
Input
C1
SH2
R2
MADR-008851-000100
Switch Driver
See Note 10
SH1
Ground
8. Forward Bias Diode Voltage: Vf is ~0.9V @ 22 mA; Vf is ~1.0V @ 35 mA
9. R1 is calculated by (VCC - Vf) / Iseries - 22 ꢀ, where Iseries is the desired forward bias current for the series diodes. For 20 mA load cur-
rent, R1 = 178 ꢀ @ VCC = 5.0V and 93 ꢀ @ VCC = 3.3V. For 50 mA load current, R1 = 57.6 ꢀ @ VCC = 5.0V and 24 ꢀ @ VCC=
3.3V.
10. R2 is calculated by (VDD - Vf) / Ishunt, where Ishunt is the desired forward bias current for the shunt diode. The power rating is calculated
by Ishunt x (VDD - Vf). For 28V VDD and 20 mA of Ishunt, R2 should use a 1W, 1.3k ohm resistor.
11. C8 is already built-in for M/A-COM MASW-000834-13560T switch.
12. The current through the back-biased diodes will be the leakage current for the diodes
13. C1-C7, L1-L4, R1, R2, and the switch are discrete components that should be installed on the user’s board. It is recommended that
Coilcraft 0603CS-27NXJLW or equivalent be used for L1-L4 at 2 GHz. For other frequency band, C1-C3 and L1-L4 should be adjusted.
14. The switching speed will be affected by the value of VCC, VDD, C6, C7, the size of the PIN diodes, and the forward bias currents. Use
higher VCC and VDD, and lower forward bias currents for faster switching.
5
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MADR-008851-000100
PIN Diode Driver for Series / Shunt High Power Switches
Rev. V1P
Lead-Free Land Grid Array, 0.64 in x 0.84 in †
†
Reference Application Note M538 for lead-free solder reflow recommendations.
Meets JEDEC moisture sensitivity level 3 requirements.
6
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
相关型号:
©2020 ICPDF网 联系我们和版权申明