A87-2_1 [TE]
Cascadable Amplifier 10 to 300 MHz; 级联放大器10到300兆赫
| 型号： | A87-2_1 |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | Cascadable Amplifier 10 to 300 MHz |
| 文件： | 总2页 (文件大小：381K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
RoHS
Compliant
Cascadable Amplifier
1 0 to 3 0 0 M H z
A8 7 -2/ S M A8 7 -2
V 3
Features
Product Image
ñ
ñ
ñ
ñ
LOW NOISE FIGURE: 3.0 dB (TYP.)
HIGH FREQUENCY: 15 mA @ +5 Vdc (TYP.)
HIGH OUTPUT POW ER AT 5 VOLTS: +11 dBm (TYP.)
LOW VSW R: <1.5.1 (TYP.)
Description
The A87-2 RF amplifier is a discrete hybrid design, which uses
thin film manufacturing processes for accurate performance and
high reliability.
This single stage bipolar transistor feedback amplifier design
displays impressive performance over a broadband frequency
range. Use of an impedance transformer offers the benefit of
high dynamic range and high efficiency.
Both TO-8 and Surface Mount packages are hermetically
sealed, and MIL-STD-883 environmental screening is available
Ordering Information
Part Number
A87-2
Package
TO-8
SMA87-2
CA87-2 **
Surface Mount
SMA Connectorized
** The connectorized version is not RoHs compliant.
Electrical Specifications: Z0 = 50W, VCC = +5 VDC
Absolute Maximum Ratings
Parameter
Absolute
Maximum
Typical
25ºC
5-350
16.0
Guaranteed
0º to 50ºC -54º to +85ºC*
Parameter
Units
Storage Temperature
Case Temperature
DC Voltage
-62ºC to +125ºC
+125ºC
Frequency
MHz
dB
10-300
15.0
10-300
14.5
+10 V
Small Signal Gain (min)
Gain Flatness (max)
Reverse Isolation
Continuous Input Power
+13 dBm
dB
±0.2
±0.5
±0.8
Short Term Input power
(1 minute max.)
50 mW
0.5 W
dB
20
Peak Power (3 µsec max.)
Noise Figure (max)
dB
2.9
3.5
9.0
4.0
8.5
—S“ Series Burn-In
Temperature (case)
+125ºC
Power Output
@ 1 dB comp. (min)
dBm
11.0
Thermal Data: VCC = +5 VDC
IP3
dBm
dBm
dBm
+24
+35
+41
Parameter
Rating
IP2
Thermal Resistance ꢀjc
185ºC/W
0.034 W
Second Order Harmonic IP
VSW R Input / Output (max)
DC Current @ 5 Volts (max)
Transistor Power Dissipation Pd
1.3:1 / 1.3:1 1.8:1 / 1.8:1
15 17
2.0:1 / 2.0:1
18
Junction Temperature Rise
Above Case Tjc
6ºC
mA
* Over temperature performance limits for part number CA87-2, guaranteed from 0oC to +50oC only.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHS
Compliant
Cascadable Amplifier
1 0 to 3 0 0 M H z
A8 7 -2/ S M A8 7 -2
V 3
Typical Performance Curves at +25°C
Outline Drawing: TO-8 *
W EIGHT: 1 gram (0.04 oz.) max
Outline Drawing: Surface Mount *
W EIGHT: 1 gram (0.04 oz.) max
Outline Drawing: SMA Connectorized *
W EIGHT: 19 grams (0.67 oz.) max
*
Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
相关型号：
A8731
The Allegro A8731 Xenon photoflash charger IC is designed to meet the needs of ultra-low power, small form factor cameras, particularly camera-phones.
ALLEGRO
A8731EEJTR-T
The Allegro A8731 Xenon photoflash charger IC is designed to meet the needs of ultra-low power, small form factor cameras, particularly camera-phones.
ALLEGRO
A8739
The Allegro A8739 is a Xenon photoflash charger IC designed to provide an ultra-small solution with flexibility to adjust both charging current limit and output voltage target.
ALLEGRO
A8739EEETR-T
The Allegro A8739 is a Xenon photoflash charger IC designed to provide an ultra-small solution with flexibility to adjust both charging current limit and output voltage target.
ALLEGRO
A8740EEETR-T
Analog Circuit, 1 Func, PDSO8, 2 X 2 MM, 0.60 MM HEIGHT, LEAD FREE, MO-229UCCD, DFN-8
ALLEGRO
©2020 ICPDF网 联系我们和版权申明