STP7N52K3 [STMICROELECTRONICS]
N-channel 525 V, 0.84 Ω, 6.3 A, D2PAK, DPAK, TO-220FP, TO-220 SuperMESH3™ Power MOSFET; N沟道525 V, 0.84 Ω , 6.3 A, D2PAK , DPAK , TO- 220FP , TO- 220 SuperMESH3 ™功率MOSFET型号: | STP7N52K3 |
厂家: | ST |
描述: | N-channel 525 V, 0.84 Ω, 6.3 A, D2PAK, DPAK, TO-220FP, TO-220 SuperMESH3™ Power MOSFET |
文件: | 总15页 (文件大小:380K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
STB7N52K3 - STD7N52K3
STF7N52K3 - STP7N52K3
N-channel 525 V, 0.84 Ω, 6.3 A, D2PAK, DPAK, TO-220FP, TO-220
SuperMESH3™ Power MOSFET
Preliminary Data
Features
RDS(on)
max
Type
VDSS
ID
Pw
3
3
1
1
STB7N52K3
STD7N52K3
STF7N52K3
STP7N52K3
525 V < 0.98 Ω 6.3 A
525 V < 0.98 Ω 6.3 A
525 V < 0.98 Ω 6.3 A(1) 25 W
90 W
90 W
DPAK
D²PAK
525 V < 0.98 Ω 6.3 A 90 W
1. Limited by package
3
3
2
1
■ 100% avalanche tested
2
TO-2201
TO-220FP
■ Extremely high dv/dt capability
■ Gate charge minimized
■ Very low intrinsic capacitances
Figure 1.
Internal schematic diagram
■ Improved diode reverse recovery
characteristics
■ Zener-protected
Application
■ Switching applications
Description
The new SuperMESH3™ series is obtained
through the combination of a further fine tuning of
ST's well established strip-based PowerMESH™
layout with a new optimization of the vertical
structure. In addition to reducing on-resistance
significantly versus previous generation, special
attention has been taken to ensure a very good
dv/dt capability and higher margin in breakdown
voltage for the most demanding application.
Table 1.
Device summary
Order codes
Marking
Package
D²PAK
Packaging
STB7N52K3
STD7N52K3
STF7N52K3
STP7N52K3
7N52K3
7N52K3
7N52K3
7N52K3
Tape and reel
Tape and reel
Tube
DPAK
TO-220FP
TO-220
Tube
July 2008
Rev 1
1/15
This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to
change without notice.
www.st.com
15
Contents
STB7N52K3 - STD7N52K3 - STF7N52K3 - STP7N52K3
Contents
1
2
3
4
5
6
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Test circuits
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2/15
STB7N52K3 - STD7N52K3 - STF7N52K3 - STP7N52K3
Electrical ratings
1
Electrical ratings
Table 2.
Symbol
Absolute maximum ratings
Value
Parameter
Unit
TO-220 DPAK D²PAK TO-220FP
VDS
VGS
ID
Drain-source voltage (VGS = 0)
Gate- source voltage
525
30
V
V
Drain current (continuous) at TC = 25 °C
Drain current (continuous) at TC = 100 °C
Drain current (pulsed)
6.3
4
6.3 (1)
4(1)
A
ID
A
IDM
25
25 (1)
A
(2)
PTOT
Total dissipation at TC = 25 °C
Derating factor
90
25
W
0.72
0.2
W/°C
Gate source ESD(HBM-C = 100 pF,
VESD(G-S)
2500
TBD
V
R = 1.5 kΩ)
dv/dt (3) Peak diode recovery voltage slope
V/ns
Insulation withstand voltage (RMS) from all
three leads to external heat sink
(t = 1 s; TC = 25 °C)
VISO
--
2500
V
Tstg
Tj
Storage temperature
-55 to 150
150
°C
°C
Max. operating junction temperature
1. Limited by package
2. Pulse width limited by safe operating area
3. ISD ≤ 6.3 A, di/dt = TBD, VDD = 80% V(BR)DSS.
Table 3.
Symbol
Thermal data
Parameter
TO-220 DPAK D²PAK TO-220FP Unit
Rthj-case Thermal resistance junction-case max
Rthj-pcb Thermal resistance junction-pcb max
Rthj-amb Thermal resistance junction-ambient max
1.39
50
5
--
°C/W
°C/W
°C/W
--
30
--
62.5
--
62.5
Maximum lead temperature for soldering
purpose
Tl
300
°C
Table 4.
Symbol
Avalanche characteristics
Parameter
Max value
Unit
Avalanche current, repetitive or not-repetitive
(pulse width limited by Tj max)
IAR
6.3
A
Single pulse avalanche energy
EAS
TBD
mJ
(starting Tj = 25°C, ID = IAR, VDD = 50V)
3/15
Electrical characteristics
STB7N52K3 - STD7N52K3 - STF7N52K3 - STP7N52K3
2
Electrical characteristics
(T = 25 °C unless otherwise specified)
C
Table 5.
Symbol
On /off states
Parameter
Test conditions
ID = 1 mA, VGS = 0
DS = Max rating
Min.
Typ.
Max. Unit
Drain-source
breakdown voltage
V(BR)DSS
525
V
Zero gate voltage
V
1
µA
µA
IDSS
drain current (VGS = 0) VDS = Max rating, TC=125 °C
50
Gate-body leakage
IGSS
VGS
=
20 V
10
µA
V
current (VDS = 0)
VGS(th)
RDS(on
Gate threshold voltage VDS = VGS, ID = 50 µA
Static drain-source on
3
3.75
0.84
4.5
VGS = 10 V, ID = 3.1 A
0.98
Ω
resistance
Table 6.
Symbol
Dynamic
Parameter
Test conditions
Min.
Typ.
Max. Unit
Forward
transconductance
gfs (1)
VDS = 15 V, ID = 3.1 A
TBD
S
Input capacitance
Ciss
Coss
Crss
TBD
TBD
TBD
pF
pF
pF
Output capacitance
VDS = 50 V, f = 1 MHz, VGS = 0
Reverse transfer
capacitance
Equivalent output
capacitance
(1)
COSS eq
VGS = 0, VDS = 0 to 420 V
f = 1 MHz open drain
TBD
TBD
pF
Intrinsic gate
resistance
RG
Ω
Qg
Qgs
Qgd
Total gate charge
Gate-source charge
Gate-drain charge
VDD = 420 V, ID = 6.3 A,
VGS = 10 V
TBD
TBD
TBD
nC
nC
nC
(see Figure 3)
1. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS
increases from 0 to 80% VDSS
Table 7.
Symbol
Switching times
Parameter
Test conditions
Min.
Typ.
Max Unit
td(on)
tr
td(off)
tf
Turn-on delay time
Rise time
TBD
TBD
TBD
TBD
ns
ns
ns
ns
VDD = 262 V, ID = 3.1 A,
RG = 4.7 Ω, VGS = 10 V
(see Figure 2)
Turn-off-delay time
Fall time
4/15
STB7N52K3 - STD7N52K3 - STF7N52K3 - STP7N52K3
Electrical characteristics
Min. Typ. Max. Unit
Table 8.
Symbol
Source drain diode
Parameter
Test conditions
ISD
Source-drain current
6.3
25
A
A
(1)
ISDM
Source-drain current (pulsed)
(2)
VSD
Forward on voltage
ISD = 6.3 A, VGS = 0
1.6
V
trr
Reverse recovery time
Reverse recovery charge
Reverse recovery current
TBD
TBD
TBD
ns
nC
A
ISD = 6.3 A, di/dt = 100 A/µs
Qrr
VDD = 30 V (see Figure 7)
IRRM
trr
Reverse recovery time
Reverse recovery charge
Reverse recovery current
ISD = 6.3 A, di/dt = 100 A/µs
VDD = 30 V, Tj = 150 °C
(see Figure 7)
TBD
TBD
TBD
ns
nC
A
Qrr
IRRM
1. Pulse width limited by safe operating area
2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5%
Table 9.
Symbol
Gate-source Zener diode
Parameter
Test conditions
Min Typ Max Unit
Gate-source breakdown
voltage
(1)
BVGSO
Igs= 1 mA (open drain)
30
V
1. The built-in back-to-back Zener diodes have specifically been designed to enhance not only the device’s
ESD capability, but also to make them safely absorb possible voltage transients that may occasionally be
applied from gate to source. In this respect the Zener voltage is appropriate to achieve an efficient and
cost-effective intervention to protect the device’s integrity. These integrated Zener diodes thus avoid the
usage of external components
5/15
Test circuits
STB7N52K3 - STD7N52K3 - STF7N52K3 - STP7N52K3
Figure 3. Gate charge test circuit
3
Test circuits
Figure 2. Switching times test circuit for
resistive load
Figure 4. Test circuit for inductive load
Figure 5. Unclamped Inductive load test
switching and diode recovery times
circuit
Figure 6. Unclamped inductive waveform
Figure 7. Switching time waveform
6/15
STB7N52K3 - STD7N52K3 - STF7N52K3 - STP7N52K3
Package mechanical data
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect. The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
7/15
Package mechanical data
STB7N52K3 - STD7N52K3 - STF7N52K3 - STP7N52K3
TO-220 mechanical data
mm
Typ
inch
Typ
Dim
Min
Max
Min
Max
A
b
4.40
0.61
1.14
0.48
15.25
4.60
0.88
1.70
0.70
15.75
0.173
0.024
0.044
0.019
0.6
0.181
0.034
0.066
0.027
0.62
b1
c
D
D1
E
1.27
0.050
10
10.40
2.70
5.15
1.32
6.60
2.72
14
0.393
0.094
0.194
0.048
0.244
0.094
0.511
0.137
0.409
0.106
0.202
0.051
0.256
0.107
0.551
0.154
e
2.40
4.95
1.23
6.20
2.40
13
e1
F
H1
J1
L
L1
L20
L30
∅P
Q
3.50
3.93
16.40
0.645
28.90
1.137
3.75
3.85
2.95
0.147
0.104
0.151
0.116
2.65
8/15
STB7N52K3 - STD7N52K3 - STF7N52K3 - STP7N52K3
Package mechanical data
TO-220FP mechanical data
mm.
Typ
inch
Dim.
Min.
4.40
2.5
Max.
4.60
2.7
Min.
Typ.
Max.
0.181
0.106
0.108
0.027
0.039
0.067
0.067
0.204
0.106
0.409
A
B
0.173
0.098
0.098
0.017
0.030
0.045
0.045
0.195
0.094
0.393
D
2.5
2.75
0.70
1.00
1.50
1.50
5.20
2.70
10.40
E
0.45
0.75
1.15
1.15
4.95
2.40
10
F
F1
F2
G
G1
H
L2
L3
L4
L5
L6
L7
Dia
16
0.630
28.6
9.80
2.9
30.6
10.60
3.6
1.126
0.385
0.114
0.626
0.354
0.118
1.204
0.417
0.141
0.645
0.366
0.126
15.90
9
16.40
9.30
3.2
3
L3
L6
L7
Dia
1
2 3
L5
L2
L4
7012510-I
9/15
Package mechanical data
STB7N52K3 - STD7N52K3 - STF7N52K3 - STP7N52K3
D²PAK (TO-263) mechanical data
mm
Typ
inch
Typ
Dim
Min
Max
Min
Max
A
A1
b
4.40
0.03
0.70
1.14
0.45
1.23
8.95
7.50
10
4.60
0.23
0.93
1.70
0.60
1.36
9.35
0.173
0.001
0.027
0.045
0.017
0.048
0.352
0.295
0.394
0.334
0.181
0.009
0.037
0.067
0.024
0.053
0.368
b2
c
c2
D
D1
E
10.40
0.409
E1
e
8.50
2.54
0.1
e1
H
4.88
15
5.28
15.85
2.69
2.79
1.40
1.75
0.192
0.590
0.099
0.090
0.05
0.208
0.624
0.106
0.110
0.055
0.069
J1
L
2.49
2.29
1.27
1.30
L1
L2
R
0.051
0.4
0.016
V2
0°
8°
0°
8°
0079457_M
10/15
STB7N52K3 - STD7N52K3 - STF7N52K3 - STP7N52K3
Package mechanical data
TO-252 (DPAK) mechanical data
mm.
typ
DIM.
min.
2.20
0.90
0.03
0.64
5.20
0.45
0.48
6.00
max.
2.40
1.10
0.23
0.90
5.40
0.60
0.60
6.20
A
A1
A2
b
b4
c
c2
D
D1
E
5.10
6.40
6.60
E1
e
4.70
2.28
e1
H
4.40
9.35
1
4.60
10.10
L
L1
L2
L4
R
2.80
0.80
0.60
0 o
1
0.20
8 o
V2
0068772_G
11/15
Package mechanical data
STB7N52K3 - STD7N52K3 - STF7N52K3 - STP7N52K3
5
Package mechanical data
DPAK FOOTPRINT
All dimensions are in millimeters
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
mm
MIN. MAX. MIN. MAX.
330 12.992
inch
DIM.
A
B
C
D
G
N
T
1.5
12.8
20.2
16.4
50
0.059
13.2 0.504 0.520
0.795
18.4 0.645 0.724
1.968
22.4
0.881
BASE QTY
BULK QTY
2500
TAPE MECHANICAL DATA
2500
mm
MIN. MAX. MIN. MAX.
6.8 0.267 0.275
10.4 10.6 0.409 0.417
12.1 0.476
inch
DIM.
A0
B0
B1
D
7
1.5
1.5
1.6 0.059 0.063
0.059
D1
E
1.65 1.85 0.065 0.073
7.4 7.6 0.291 0.299
2.55 2.75 0.100 0.108
F
K0
P0
P1
P2
R
3.9
7.9
1.9
40
4.1 0.153 0.161
8.1 0.311 0.319
2.1 0.075 0.082
1.574
W
15.7
16.3 0.618 0.641
12/15
STB7N52K3 - STD7N52K3 - STF7N52K3 - STP7N52K3
Package mechanical data
2
D PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
mm
MIN. MAX. MIN. MAX.
330 12.992
inch
DIM.
A
B
C
D
G
N
T
1.5
12.8
20.2
24.4
100
0.059
13.2 0.504 0.520
0795
26.4 0.960 1.039
3.937
30.4
1.197
BASE QTY
BULK QTY
1000
TAPE MECHANICAL DATA
1000
mm
inch
DIM.
MIN. MAX. MIN. MAX.
10.5 10.7 0.413 0.421
15.7 15.9 0.618 0.626
A0
B0
D
1.5
1.6 0.059 0.063
D1
E
1.59 1.61 0.062 0.063
1.65 1.85 0.065 0.073
F
11.4
4.8
3.9
11.9
1.9
50
11.6 0.449 0.456
5.0 0.189 0.197
4.1 0.153 0.161
12.1 0.468 0.476
2.1 0.075 0.082
1.574
K0
P0
P1
P2
R
T
0.25 0.35 0.0098 0.0137
23.7 24.3 0.933 0.956
W
* on sales type
13/15
Revision history
STB7N52K3 - STD7N52K3 - STF7N52K3 - STP7N52K3
6
Revision history
Table 10. Document revision history
Date
Revision
Changes
07-Jul-2008
1
First release
14/15
STB7N52K3 - STD7N52K3 - STF7N52K3 - STP7N52K3
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2008 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
15/15
相关型号:
STP7N95K3
N-channel 950 V, 1.1 Ohm, 7.2 A, TO-220, TO-220FP, TO-247 Zener-protected SuperMESH3 Power MOSFET
STMICROELECTR
©2020 ICPDF网 联系我们和版权申明