STP08CP05TTR [STMICROELECTRONICS]
Low voltage, low current power 8-bit shift register; 低电压，低电流功率的8位移位寄存器
| 型号： | STP08CP05TTR |
| 厂家： | 
ST |
| 描述： | Low voltage, low current power 8-bit shift register |
| 文件： | 总25页 (文件大小：418K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
STP08CP05
Low voltage, low current power 8-bit shift register
Preliminary Data
Features
■ Low voltage power supply down to 3V
■ 8 constant current output channels
Dip-16
■ Adjustable output current through external
TSSOP16
(Exposed pad)
resistor
■ Serial Data IN/Parallel data OUT
■ 3.3V micro driver-able
■ Output current: 5-100mA
■ 30MHz clock frequency
TSSOP16
SO-16
■ Available in high thermal efficiency TSSOP
exposed pad
■ ESD protection 2.5kV HBM, 200V MM
Description
The STP08CP05 is backward compatible in
functionality and footprint with STP8C/L596.
Through an external resistor, users can adjust the
STP08CP05 output current, controlling in this way
the light intensity of LEDs, in addition, user can
adjust LED’s brightness intensity from 0% to
100% via OE pin.
The STP08CP05 is a monolithic, low voltage, low
current, power 8-bit shift register designed for
LED panel displays. The STP08CP05 contains a
8-bit serial-in, parallel-out shift register that feeds
a
8-bit D-type storage register. In the output stage,
eight regulated current sources were designed to
provide 5-100mA constant current to drive the
LEDs, the output current setup time is 10ns (typ),
thus improving the system performance.
The STP08CP05 guarantees a 20V output driving
capability, allowing users to connect more LEDs in
series. The high clock frequency, 30 MHz, also
satisfies the system requirement of high volume
data transmission. The 3.3V of voltage supply is
useful for applications that interface with any
micro from 3.3V. Compared with a standard
TSSOP package, the TSSOP exposed pad
increases heat dissipation capability by a 2.5
factor.
Table 1. Device summary
Order codes
Package
DIP-16
Packaging
STP08CP05B1R
STP08CP05MTR
STP08CP05TTR
STP08CP05XTTR
25 parts per tube
SO-16 (Tape & Reel)
TSSOP16 (Tape & Reel)
2500 parts per reel
2500 parts per reel
2500 parts per reel
TSSOP16 Exposed-Pad (Tape & Reel)
June 2007
Rev 2
1/25
This is preliminary information on a new product now in development or undergoing evaluation.
Details are subject to change without notice.
www.st.com
25
Contents
STP08CP05
Contents
1
Summary description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1
Pin connection and description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
3
Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Maximum rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3.1
3.2
3.3
Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Recommended operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4
5
6
7
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Switching characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Equivalent circuit and outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Truth table and timing diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
7.1
7.2
Truth table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Timing diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
8
Typical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
9
10
11
2/25
STP08CP05
Summary description
1
Summary description
Table 2. Typical current accuracy
Output voltage
Current accuracy
Output current
Between bits
Between ICs
≥1.3V
1.5%
3%
20 to 100mA
1.1
Pin connection and description
Figure 1. Connections diagram
Note:
The Exposed-pad is electrically not connected
Table 3. Pin description
PIN N°
Symbol
Name and function
1
2
GND
SDI
Ground terminal
Serial data input terminal
Clock input terminal
3
CLK
4
LE
Latch input terminal
5-12
13
14
15
16
OUT 0-7
OE
Output terminal
Output enable input terminal (active low)
Serial data out terminal
Constant current programming
5V Supply voltage terminal
SDO
R-EXT
VDD
3/25
Block diagram
STP08CP05
2
Block diagram
Figure 2. Block diagram
4/25
STP08CP05
Maximum rating
3
Maximum rating
Stressing the device above the rating listed in the “Absolute Maximum Ratings” table may
cause permanent damage to the device. These are stress ratings only and operation of the
device at these or any other conditions above those indicated in the Operating sections of
this specification is not implied. Exposure to Absolute Maximum Rating conditions for
extended periods may affect device reliability. Refer also to the STMicroelectronics SURE
Program and other relevant quality documents.
3.1
Absolute maximum ratings
Table 4. Absolute maximum ratings
Symbol
VDD
VO
Parameter
Value
Unit
Supply voltage IGND
Output voltage
0 to 7
-0.5 to 20
100
V
V
IO
Output current
mA
mA
MHz
°C
IGND
fCLK
TOPR
GND terminal current
Clock frequency
800
50
Operating temperature range
Storage temperature range
-40 to +125
-55 to +150
TSTG
°C
3.2
Thermal data
Table 5. Thermal data
TSSOP-16 (1)
(exposed pad)
Symbol
Parameter
DIP-16 SO-16 TSSOP-16
Unit
RthJA
Thermal resistance junction-ambient
60
75
85
37.5
°C/W
1. The Exposed-Pad should be soldered to the PBC to realize the thermal benefits
5/25
Maximum rating
STP08CP05
3.3
Recommended operating conditions
Table 6. Recommended operating conditions
Symbol
VDD
Parameter
Supply voltage
Test conditions
Min
Typ
Max
Unit
V
3.0
5.5
20
VO
Output voltage
Output current
V
IO
OUTn
5
100
mA
mA
mA
V
IOH
Output current
SERIAL-OUT
SERIAL-OUT
+1
IOL
Output current
-1
VIH
0.7VDD
-0.3
20
VDD+0.3
0.3VDD
Input voltage
VIL
Input voltage
V
twLAT
twCLK
twEN
LE pulse width
CLK pulse width
OE pulse width
Setup time for DATA
Hold time for DATA
Setup time for LATCH
Clock frequency
ns
20
ns
200
7
ns
VDD = 3.0 to 5.0V
tSETUP(D)
tHOLD(D)
tSETUP(L)
fCLK
ns
4
ns
15
ns
Cascade operation (1)
30
MHz
1. In order to achieve high cascade data transfer,please consider tr/tf timings carefully.
6/25
STP08CP05
Electrical characteristics
4
Electrical characteristics
Table 7. Electrical characteristics
(V =3.3V to 5V, T = 25°C, unless otherwise specified.)
DD
Symbol
Parameter
Test conditions
Min
Typ
Max
Unit
VIH
VIL
IOH
Input voltage high level
Input voltage low level
Output leakage current
0.7VDD
GND
VDD
0.3VDD
10
V
V
VOH = 20V
IOL = 1mA
OH = -1mA
O = 0.3V, Rext = 3.9kΩ
0.5
µA
Output voltage
(Serial-OUT)
VOL
VOH
0.03
0.4
V
V
Output voltage
(Serial-OUT)
I
VOH - VDD =- 0.4V
IOL1
IOL2
V
4.25
19.4
97
5
5.75
20.6
103
8
Output current
VO = 0.3V, Rext = 970Ω
VO = 1.3V, Rext = 190Ω
VO = 0.3VREXT = 3.9kΩ
VO = 0.3VREXT = 970Ω
VO = 1.3VREXT =190Ω
20
mA
%
IOL3
100
5
∆IOL1
∆IOL2
∆IOL3
Output current error
between bit
(All Output ON)
1.5
1.2
300
200
2.75
2.5
RSIN(up) Pull-up resistor
150
100
600
400
KΩ
KΩ
RSIN(down) Pull-down resistor
R
EXT = 980
IDD(OFF1)
4
5
OUT 0 to 7 = OFF
Supply current (OFF)
IDD(OFF2)
REXT = 250
OUT 0 to 7 = OFF
11.2
4.5
13.5
5
mA
°C
REXT = 980
IDD(ON1)
OUT 0 to 7 = ON
Supply current (ON)
IDD(ON2)
REXT = 250
OUT 0 to 7 = ON
11.7
170
13.5
Thermal Thermal protection (1)
1. Guaranteed by desing (not tested)
The thermal protection switches OFF only the outputs
7/25
Switching characteristics
STP08CP05
5
Switching characteristics
Table 8. Switching characteristics (V = 5V, T = 25°C, unless otherwise specified.)
DD
Symbol
Parameter
Test conditions
Min
Typ
35
18
48
30
55
36
Max Unit
Propagation delay time,
VDD = 3.3V
VDD = 5V
70
tPLH1 CLK-OUTn, LE = H,
OE = L
ns
35
Propagation delay time,
tPLH2 LE -OUTn,
OE = L
V
DD = 3.3V
VDD = 5V
DD = 3.3V
90
ns
60
Propagation delay time,
tPLH3 OE -OUTn,
LE = H
V
110
ns
VDD = 5V
75
VDD = 3.3V
VDD = 5V
7
4
14
ns
8
Propagation delay time,
CLK-SDO
tPLH
Propagation delay time,
tPHL1 CLK-OUTn, LE = H,
OE = L
V
DD = 3.3V
VDD = 5V
DD = 3.3V
10
20
V
DD = 3.3 V
VIH = VDD
CL = 10pF
VL = 3.0 V
RL = 60 Ω
ns
7
14
VIL = GND
IO = 20mA
REXT = 1KΩ
Propagation delay time,
tPHL2 LE -OUTn,
OE = L
V
24
20
20
17
50
ns
VDD = 5V
VDD = 3.3V
VDD = 5V
40
Propagation delay time,
tPHL3 OE -OUTn,
LE = H
40
ns
35
VDD = 3.3V
VDD = 5V
22
18
25
30
ns
25
Propagation delay time,
CLK-SDO
tPHL
Output rise time
VDD = 3.3V
60
tON
10~90% of voltage
waveform
ns
VDD = 5V
VDD = 3.3V
VDD = 5V
10
5
25
Output fall time
90~10% of voltage
waveform
15
tOFF
ns
4
12
tr
tf
CLK rise time (1)
CLK fall time (1)
5000
5000
ns
ns
1. In order to achieve high cascade data transfer, please consider tr/tf timings carefully.
8/25
STP08CP05
Equivalent circuit and outputs
6
Equivalent circuit and outputs
Figure 3. OE terminal
Figure 4. LE terminal
Figure 5. CLK, SDI terminal
9/25
Equivalent circuit and outputs
Figure 6. SDO terminal
STP08CP05
10/25
STP08CP05
Truth table and timing diagram
7
Truth table and timing diagram
7.1
Truth table
Table 9. Truth table
Clock
LE
OE
SDI
OUT0 ........ OUT0 ........ OUT7
SDO
H
L
Dn
Dn ..... Dn -5 ..... Dn -7
No Change
Dn -7
L
H
X
X
L
L
Dn + 1
Dn + 2
Dn + 3
Dn + 3
Dn -7
Dn -5
Dn -5
Dn -5
Dn +2 ..... Dn -3 ..... Dn -5
Dn +2 ..... Dn -3 ..... Dn -5
OFF
L
H
Note:
OUT0 to OUT7 = ON when Dn = H; OUT0 to OUT7 = OFF when Dn = L.
11/25
Truth table and timing diagram
STP08CP05
7.2
Timing diagram
Figure 7. Timing diagram
Figure 8. Clock, serial-in, serial-out
12/25
STP08CP05
Truth table and timing diagram
Figure 9. Clock, serial-in, latch, enable, outputs
Figure 10. Outputs
13/25
Typical characteristics
STP08CP05
8
Typical characteristics
Figure 11. Output current-R
resistor
EXT
8000
7000
6000
5000
4000
3000
2000
1000
0
0
10 20 30 40 50 60 70 80 90 100 110 120 130 140
Ouput Current (mA)
Table 10. Output current-R
resistor
EXT
Output Current (mA)
3
5
10
20
50
80
130
124
Rext (Ω)
6740
3930
1913
963
386
241
14/25
STP08CP05
Typical characteristics
Figure 12. Power dissipation vs temperature package
Note:
The Exposed-Pad should be soldered to the PBC to realize the thermal benefits.
15/25
Test circuit
STP08CP05
9
Test circuit
Figure 13. DC characteristics
Figure 14. AC characteristics
16/25
STP08CP05
Package mechanical data
10
Package mechanical data
®
In order to meet environmental requirements, ST offers these devices in ECOPACK
packages. These packages have a Lead-free second level interconnect. The category of
second Level Interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com.
17/25
Package mechanical data
STP08CP05
Plastic DIP-16 (0.25) MECHANICAL DATA
mm.
TYP
inch
TYP.
DIM.
MIN.
MAX.
MIN.
0.020
0.030
MAX.
a1
B
b
0.51
0.77
1.65
0.065
0.5
0.020
0.010
b1
D
E
e
0.25
20
0.787
8.5
2.54
17.78
0.335
0.100
0.700
e3
F
7.1
5.1
0.280
0.201
I
L
3.3
0.130
Z
1.27
0.050
P001C
18/25
STP08CP05
Package mechanical data
TSSOP16 MECHANICAL DATA
mm.
inch
DIM.
MIN.
TYP
MAX.
1.2
MIN.
TYP.
MAX.
0.047
0.006
0.041
0.012
0.0079
0.201
0.260
0.176
A
A1
A2
b
0.05
0.8
0.15
1.05
0.30
0.20
5.1
0.002
0.031
0.007
0.004
0.193
0.244
0.169
0.004
0.039
1
0.19
0.09
4.9
c
D
5
6.4
0.197
0.252
E
6.2
6.6
E1
e
4.3
4.4
4.48
0.173
0.65 BSC
0.0256 BSC
K
0˚
8˚
0˚
8˚
L
0.45
0.60
0.75
0.018
0.024
0.030
A2
A
K
L
b
e
A1
c
E
D
E1
PIN 1 IDENTIFICATION
1
0080338D
19/25
Package mechanical data
STP08CP05
TSSOP16 EXPOSED PAD MECHANICAL DATA
mm.
TYP
inch
TYP.
DIM.
MIN.
MAX.
MIN.
MAX.
A
1.2
0.15
1.05
0.30
0.20
5.1
0.047
0.006
0.041
0.012
0.0089
0.201
A1
0.004
0.039
A2
b
0.8
0.19
0.09
4.9
1
5
0.031
0.007
0.004
0.193
0.067
0.244
0.169
0.059
c
D
0.197
D1
E
1.7
6.2
6.4
4.4
6.6
4.5
0.252
0.173
0.260
0.177
E1
E2
e
4.3
1.5
0.65
0.60
0.0256
0.024
K
0°
8°
0°
8°
L
0.45
0.75
0.018
0.030
7419276A
20/25
STP08CP05
Package mechanical data
Tape & Reel TSSOP16 MECHANICAL DATA
mm.
TYP
inch
TYP.
DIM.
MIN.
MAX.
330
MIN.
MAX.
12.992
0.519
A
C
12.8
20.2
60
13.2
0.504
0.795
2.362
D
N
T
22.4
6.9
5.5
1.8
4.1
8.1
0.882
0.272
0.217
0.071
0.161
0.319
Ao
Bo
Ko
Po
P
6.7
5.3
1.6
3.9
7.9
0.264
0.209
0.063
0.153
0.311
21/25
Package mechanical data
STP08CP05
SO-16 MECHANICAL DATA
mm.
inch
TYP.
DIM.
MIN.
TYP
MAX.
1.75
0.25
1.64
0.46
0.25
MIN.
MAX.
0.068
0.010
0.063
0.018
0.010
A
a1
a2
b
0.1
0.004
0.35
0.19
0.013
0.007
b1
C
0.5
0.019
c1
D
45° (typ.)
9.8
5.8
10
0.385
0.228
0.393
0.244
E
6.2
e
1.27
8.89
0.050
0.350
e3
F
3.8
4.6
0.5
4.0
5.3
0.149
0.181
0.019
0.157
0.208
0.050
0.024
G
L
1.27
0.62
M
S
8° (max.)
0016020D
22/25
STP08CP05
Package mechanical data
Tape & Reel SO-16 MECHANICAL DATA
mm.
TYP
inch
TYP.
DIM.
MIN.
MAX.
330
MIN.
MAX.
12.992
0.519
A
C
12.8
20.2
60
13.2
0.504
0.795
2.362
D
N
T
22.4
6.65
10.5
2.3
0.882
0.262
0.414
0.090
0.161
0.319
Ao
Bo
Ko
Po
P
6.45
10.3
2.1
0.254
0.406
0.082
0.153
0.311
3.9
4.1
7.9
8.1
23/25
Revision history
STP08CP05
11
Revision history
Table 11. Revision history
Date
Revision
Changes
23-May-2007
28-Jun-2007
1
2
First release
Updated Table 7 on page 7
24/25
STP08CP05
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
25/25
相关型号：
STP08DP05
Low voltage 8-Bit constant current Led sink with full outputs error detection
STMICROELECTR
STP08DP05B1
Low-voltage 8-bit constant current LED sink with full outputs error detection
STMICROELECTR
STP08DP05B1R
Low voltage 8-Bit constant current Led sink with full outputs error detection
STMICROELECTR
STP08DP05MTR
Low voltage 8-Bit constant current Led sink with full outputs error detection
STMICROELECTR
STP08DP05TTR
Low voltage 8-Bit constant current Led sink with full outputs error detection
STMICROELECTR
STP08DP05XTTR
Low voltage 8-Bit constant current Led sink with full outputs error detection
STMICROELECTR
STP100NF03L-03
N-CHANNEL 30V - 0.0026 W -100A DPAK/IPAK/TO-220 STripFET⑩ II POWER MOSFET
STMICROELECTR
STP100NF04
N-CHANNEL 40V - 0.0043ohm - 120A TO-220/D2PAK/I2PAK STripFET⑩ II POWER MOSFET
STMICROELECTR
©2020 ICPDF网 联系我们和版权申明