STGP18N40LZ [STMICROELECTRONICS]
EAS 180 mJ - 390 V - internally clamped IGBT; EAS 180毫焦耳 - 390 V - 内部钳位IGBT
| 型号： | STGP18N40LZ |
| 厂家： | 
ST |
| 描述： | EAS 180 mJ - 390 V - internally clamped IGBT |
| 文件： | 总19页 (文件大小：893K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
STGB18N40LZ
STGD18N40LZ, STGP18N40LZ
EAS 180 mJ - 390 V - internally clamped IGBT
Features
■ AEC Q101 compliant
3
3
2
■ 180 mJ of avalanche energy @ T = 150 °C,
C
1
1
L = 3 mH
DPAK
IPAK
■ ESD gate-emitter protection
■ Gate-collector high voltage clamping
■ Logic level gate drive
3
2
1
■ Low saturation voltage
TO-220
3
1
3
■ High pulsed current capability
■ Gate and gate-emitter resistor
2
1
D²PAK
I²PAK
Application
■ Pencil coil electronic ignition driver
Figure 1.
Internal schematic diagram
C (2 or TAB)
Description
This application-specific IGBT utilizes the most
advanced PowerMESH™ technology. The built-in
Zener diodes between gate-collector and gate-
emitter provide overvoltage protection
capabilities. The device also exhibits low on-state
voltage drop and low threshold drive for use in
automotive ignition system.
R
G
G (1)
R
GE
E (3)
SC30180
Table 1.
Device summary
Order codes
Marking
Package
Packaging
STGB18N40LZ-1
STGB18N40LZT4
STGD18N40LZ-1
STGD18N40LZT4
STGP18N40LZ
GB18N40LZ
GB18N40LZ
GD18N40LZ
GD18N40LZ
GP18N40LZ
I²PAK
D²PAK
IPAK
Tube
Tape and reel
Tube
DPAK
TO-220
Tape and reel
Tube
May 2009
Doc ID 14322 Rev 5
1/19
www.st.com
19
Contents
STGB18N40LZ, STGD18N40LZ, STGP18N40LZ
Contents
1
2
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3
4
5
6
Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2/19
Doc ID 14322 Rev 5
STGB18N40LZ, STGD18N40LZ, STGP18N40LZ
Electrical ratings
1
Electrical ratings
Table 2.
Symbol
Absolute maximum ratings
Value
Parameter
Unit
DPAK
IPAK
D²PAK
I²PAK, TO-220
VCES
VECS
Collector-emitter voltage (vGE = 0)
Emitter collector voltage (VGE = 0)
Collector current (continuous) at TC = 100 °C
Pulsed collector current
VCES(clamped)
V
V
20
(1)
IC
25
30
A
(2)
ICP
40
A
VGE
PTOT
EAS
Gate-emitter voltage
VGE(clamped)
V
Total dissipation at TC = 25 °C
125
150
W
mJ
mJ
kV
V
Single pulse energy TC= 25 °C, L = 3 mH, VCC = 50 V
Single pulse energy TC=150 °C, L = 3 mH, VCC = 50 V
Human body model, R= 1.5 kΩ, C = 100 pF
Machine model, R = 0, C = 100 pF
Charged device model
300
180
8
EAS
ESD
800
2
kV
Tstg
Tj
Storage temperature
– 55 to 175
°C
Operating junction temperature
1. Calculated according to the iterative formula
T
j(max) – TC
IC(TC) = ----------------------------------------------------------------------------------------------------------
Rthj – c × VCE(sat)(max)(Tj(max), IC(TC))
2. Pulse width limited by max. junction temperature allowed
Table 3.
Symbol
Thermal data
Value
Parameter
Unit
DPAK
IPAK
D²PAK
I²PAK, TO-220
Rthj-case Thermal resistance junction-case
Rthj-amb Thermal resistance junction-ambient
1.2
1
°C/W
°C/W
100
62.5
Doc ID 14322 Rev 5
3/19
Electrical characteristics
STGB18N40LZ, STGD18N40LZ, STGP18N40LZ
2
Electrical characteristics
(T =25 °C unless otherwise specified)
J
Table 4.
Symbol
Static electrical characteristics
Parameter
Test conditions
Min. Typ. Max. Unit
Collector emitter
clamped voltage
IC = 2 mA
VCES(clamped)
360 390
420
V
T = - 40 °C to 150 °C
J
(VGE = 0)
Emitter collector
break-down voltage
V(BR)ECS
VGE(clamped)
ICES
IC = 75 mA
20
12
28
V
V
(VGE = 0)
Gate emitter
clamped voltage
IG = 2 mA
16
Collector cut-off
current
VCE = 15 V, T = 150 °C
10
µA
µA
J
VCE = 200 V, T = 150 °C
J
100
(VGE = 0)
Gate-emitter
leakage current
(VCE = 0)
IGES
VGE = 10 V
450 625
830
22
µA
Gate emitter
resistance
RGE
RG
12
16
kΩ
Gate resistance
1.6
kΩ
V
VGE =VCE, IC = 1 mA, T = -40 °C
J
1.4
1.2
0.7
Gate threshold
voltage
VGE(th)
VGE =VCE, IC = 1 mA
1.6
2.3
1.7
V
VGE =VCE, IC = 1 mA, T =150 °C
V
J
V
GE = 4.5 V, IC = 10 A
VGE = 4.5 V, IC = 10 A,
T = 150 °C
1.35
1.30
1.30
V
Collector emitter
saturation voltage
VCE(sat)
V
V
J
VGE = 3.8 V, IC = 6 A
Table 5.
Symbol
Dynamic electrical characteristics
Parameter
Test conditions
Min. Typ. Max. Unit
Cies
Input capacitance
-
-
490
90
-
-
pF
pF
VCE = 25 V, f = 1 MHz,
VGE = 0
Coes
Output capacitance
Reverse transfer
capacitance
Cres
Qg
-
-
5
-
-
pF
nC
VCE = 280 V, IC = 10 A,
Gate charge
29
VGE = 5 V
4/19
Doc ID 14322 Rev 5
STGB18N40LZ, STGD18N40LZ, STGP18N40LZ
Electrical characteristics
Min. Typ. Max. Unit
Table 6.
Symbol
Switching on/off
Parameter
Test conditions
VCC = 14 V,
Resistive load
Turn-on delay time
Rise time
td(on)
tr
-
-
0.65
3.5
-
-
µs
µs
RL = 1 Ω, VGE = 5 V
Resistive load
Turn-on delay time
Rise time
VCC = 14 V,
td(on)
tr
RL = 1 Ω, VGE = 5 V,
T = 150 °C
J
0.65
3.8
µs
µs
Inductive load
Turn-off delay time
Fall time
td(off)
tf
VCC = 300 V, L = 1 mH
IC = 10 A, VGE = 5 V
13.5
5.5
µs
µs
-
-
-
-
dv/dt
Turn-off voltage slope
105
V/µs
Inductive load
Turn-off delay time
Fall time
VCC = 300 V, L = 1 mH
IC = 10 A, VGE = 5 V
td(off)
tf
14.2
8
µs
µs
T = 150 °C
J
dv/dt
Turn-off voltage slope
97
V/µs
Doc ID 14322 Rev 5
5/19
Electrical characteristics
STGB18N40LZ, STGD18N40LZ, STGP18N40LZ
2.1
Electrical characteristics (curves)
Figure 2.
Collector-emitter on voltage vs
temperature
Figure 3.
Collector-emitter on voltage vs
temperature
Figure 4.
Collector-emitter on voltage vs
temperature
Figure 5.
Self clamped inductive switch
AM03942v1
I
SCIS
(A)
VGE=5V
VCE=50V
24
16
TJ=25°C
8
TJ=150°C
0
4
6
8
2
L(mH)
0
Figure 6.
Output characteristics @ 25 °C
Figure 7.
Output characteristics @ -40 °C
HV42380
HV42390
IC (A)
IC (A)
50
VGE = 4.5 V
VGE = 8 V
VGE = 8 V
VGE = 4.5 V
50
40
30
20
10
0
VGE = 5 V
VGE = 4 V
VGE = 5 V
→
VGE = 4 V
40
VGE = 3.8 V
VGE = 3
.
8 V
30
20
TC = -40 °C
TC = 25 °C
10
0
2
0
1
3
4
5
VCE (V)
VCE (V)
0
1
2
3
4
6/19
Doc ID 14322 Rev 5
STGB18N40LZ, STGD18N40LZ, STGP18N40LZ
Electrical characteristics
Figure 8.
Output characteristics @ 175 °C
Figure 9.
Transfer characteristics
HV42400
HV38710
IC (A)
IC (A)
VGE = 5 V
VGE = 8 V
335
50
40
30
20
10
0
VGE = 4.5 V
VCE= 5V
330
VGE = 4 V
225
220
VGE = 3.8 V
115
175°C
25°C
110
TC = 175 °C
5
-40°C
3.0 3.5 4.
0
VG
(V
)
1
0
2
.5
3
0
4
.5
E
VCE (V)
0
1
2
3
4
Figure 10. Collector cut-off current vs.
temperature
Figure 11. Normalized collector emitter
voltage vs temperature
Figure 12. Normalized gate threshold voltage Figure 13. Normalized collector emitter on
vs temperature voltage vs temperature
Doc ID 14322 Rev 5
7/19
Electrical characteristics
STGB18N40LZ, STGD18N40LZ, STGP18N40LZ
Figure 14. Thermal impedance for D²PAK,
I²PAK, TO-220
Figure 15. Thermal impedance for DPAK,
IPAK
8/19
Doc ID 14322 Rev 5
STGB18N40LZ, STGD18N40LZ, STGP18N40LZ
Test circuits
3
Test circuits
Figure 16. Inductive load switching
Figure 17. Resistive load switching
L
AM01504v1
AM01504v2
Figure 18. Gate charge test circuit
Figure 19. Switching waveform
90%
10%
VG
90%
10%
VCE
Tr(Voff)
Tcross
90%
10%
IC
Td(off)
Toff
Td(on)
Ton
Tf
Tr(Ion)
AM01505v1
AM01506v1
Doc ID 14322 Rev 5
9/19
Package mechanical data
STGB18N40LZ, STGD18N40LZ, STGP18N40LZ
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
®
®
ECOPACK packages, depending on their level of environmental compliance. ECOPACK
specifications, grade definitions and product status are available at: www.st.com. ECOPACK
is an ST trademark.
10/19
Doc ID 14322 Rev 5
STGB18N40LZ, STGD18N40LZ, STGP18N40LZ
Package mechanical data
TO-252 (DPAK) mechanical data
mm.
typ
DIM.
min.
2.20
0.90
0.03
0.64
5.20
0.45
0.48
6.00
max.
2.40
1.10
0.23
0.90
5.40
0.60
0.60
6.20
A
A1
A2
b
b4
c
c2
D
D1
E
5.10
6.40
6.60
E1
e
4.70
2.28
e1
H
4.40
9.35
1
4.60
10.10
L
L1
L2
L4
R
2.80
0.80
0.60
0 o
1
0.20
8 o
V2
0068772_G
Doc ID 14322 Rev 5
11/19
Package mechanical data
STGB18N40LZ, STGD18N40LZ, STGP18N40LZ
TO-251 (IPAK) mechanical data
mm.
typ
DIM.
min.
2.20
0.90
0.64
max.
2.40
1.10
0.90
0.95
5.40
0.60
0.60
6.20
6.60
A
A1
b
b2
b4
c
5.20
0.45
0.48
6.00
6.40
c2
D
E
e
2.28
e1
H
4.40
4.60
16.10
L
9.00
0.80
9.40
(L1)
L2
V1
1.20
0.80
10 o
0068771_H
12/19
Doc ID 14322 Rev 5
STGB18N40LZ, STGD18N40LZ, STGP18N40LZ
Package mechanical data
D²PAK (TO-263) mechanical data
mm
Typ
inch
Dim
Min
Max
Min
Typ
Max
A
A1
b
4.40
0.03
0.70
1.14
0.45
1.23
8.95
7.50
10
4.60
0.23
0.93
1.70
0.60
1.36
9.35
0.173
0.001
0.027
0.045
0.017
0.048
0.352
0.295
0.394
0.334
0.181
0.009
0.037
0.067
0.024
0.053
0.368
b2
c
c2
D
D1
E
10.40
0.409
E1
e
8.50
2.54
0.1
e1
H
4.88
15
5.28
15.85
2.69
2.79
1.40
1.75
0.192
0.590
0.099
0.090
0.05
0.208
0.624
0.106
0.110
0.055
0.069
J1
L
2.49
2.29
1.27
1.30
L1
L2
R
0.051
0.4
0.016
V2
0°
8°
0°
8°
0079457_M
Doc ID 14322 Rev 5
13/19
Package mechanical data
STGB18N40LZ, STGD18N40LZ, STGP18N40LZ
I²PAK (TO-262) mechanical data
mm
Typ
inch
Typ
Dim
Min
Max
Min
Max
A
A1
b
4.40
2.40
0.61
1.14
0.49
1.23
8.95
2.40
4.95
10
4.60
2.72
0.88
1.70
0.70
1.32
9.35
2.70
5.15
10.40
14
0.173
0.094
0.024
0.044
0.019
0.048
0.352
0.094
0.194
0.393
0.511
0.137
0.050
0.181
0.107
0.034
0.066
0.027
0.052
0.368
0.106
0.202
0.410
0.551
0.154
0.055
b1
c
c2
D
e
e1
E
L
13
L1
L2
3.50
1.27
3.93
1.40
14/19
Doc ID 14322 Rev 5
STGB18N40LZ, STGD18N40LZ, STGP18N40LZ
Package mechanical data
TO-220 mechanical data
mm
Typ
inch
Dim
Min
Max
Min
Typ
Max
A
b
4.40
0.61
1.14
0.48
15.25
4.60
0.88
1.70
0.70
15.75
0.173
0.024
0.044
0.019
0.6
0.181
0.034
0.066
0.027
0.62
b1
c
D
D1
E
1.27
0.050
10
10.40
2.70
5.15
1.32
6.60
2.72
14
0.393
0.094
0.194
0.048
0.244
0.094
0.511
0.137
0.409
0.106
0.202
0.051
0.256
0.107
0.551
0.154
e
2.40
4.95
1.23
6.20
2.40
13
e1
F
H1
J1
L
L1
L20
L30
∅P
Q
3.50
3.93
16.40
0.645
28.90
1.137
3.75
3.85
2.95
0.147
0.104
0.151
0.116
2.65
Doc ID 14322 Rev 5
15/19
Packaging mechanical data
STGB18N40LZ, STGD18N40LZ, STGP18N40LZ
5
Packaging mechanical data
DPAK FOOTPRINT
All dimensions are in millimeters
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
mm
MIN. MAX. MIN. MAX.
330 12.992
inch
DIM.
A
B
C
D
G
N
T
1.5
12.8
20.2
16.4
50
0.059
13.2 0.504 0.520
0.795
18.4 0.645 0.724
1.968
22.4
0.881
BASE QTY
BULK QTY
2500
TAPE MECHANICAL DATA
2500
mm
MIN. MAX. MIN. MAX.
6.8 0.267 0.275
10.4 10.6 0.409 0.417
12.1 0.476
inch
DIM.
A0
B0
B1
D
7
1.5
1.5
1.6 0.059 0.063
0.059
D1
E
1.65 1.85 0.065 0.073
7.4 7.6 0.291 0.299
2.55 2.75 0.100 0.108
F
K0
P0
P1
P2
R
3.9
7.9
1.9
40
4.1 0.153 0.161
8.1 0.311 0.319
2.1 0.075 0.082
1.574
W
15.7
16.3 0.618 0.641
16/19
Doc ID 14322 Rev 5
STGB18N40LZ, STGD18N40LZ, STGP18N40LZ
Packaging mechanical data
2
D PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
mm
MIN. MAX. MIN. MAX.
330 12.992
inch
DIM.
A
B
C
D
G
N
T
1.5
12.8
20.2
24.4
100
0.059
13.2 0.504 0.520
0795
26.4 0.960 1.039
3.937
30.4
1.197
BASE QTY
BULK QTY
1000
TAPE MECHANICAL DATA
1000
mm
inch
DIM.
MIN. MAX. MIN. MAX.
10.5 10.7 0.413 0.421
15.7 15.9 0.618 0.626
A0
B0
D
1.5
1.6 0.059 0.063
D1
E
1.59 1.61 0.062 0.063
1.65 1.85 0.065 0.073
F
11.4
4.8
3.9
11.9
1.9
50
11.6 0.449 0.456
5.0 0.189 0.197
4.1 0.153 0.161
12.1 0.468 0.476
2.1 0.075 0.082
1.574
K0
P0
P1
P2
R
T
0.25 0.35 0.0098 0.0137
23.7 24.3 0.933 0.956
W
* on sales type
Doc ID 14322 Rev 5
17/19
Revision history
STGB18N40LZ, STGD18N40LZ, STGP18N40LZ
6
Revision history
Table 7.
Date
Document revision history
Revision
Changes
18-Jan-2008
07-Mar-2008
07-May-2008
31-Mar-2009
18-May-2009
1
2
3
4
5
Initial release.
Modified Figure 7, Figure 8, Figure 10.
Modified Figure 9
Added new package, mechanical data: TO-220
Modified Figure 5
18/19
Doc ID 14322 Rev 5
STGB18N40LZ, STGD18N40LZ, STGP18N40LZ
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2009 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Doc ID 14322 Rev 5
19/19
相关型号：
©2020 ICPDF网 联系我们和版权申明