AP2301 [RFHIC]
MMIC; MMICMMIC
AP2301 (Old part#: AP230S12)
`Product Features
Application
• Satellite
• Small size
• Converter
• CATV
• Optical node
• SMD Type Package
• NO matching circuit needed
• High efficiency
• Dual supply voltage
• Higher linearity
• 12 pin Air cavity package
• Higher productivity
• Lower manufacturing cost
• GaAs MMIC
Package : SP12
• 3 – 2000MHz
• -63dBc CSO 135 Channels@ output Level +37dBmV
• -60dBc CTB 135 Channels@ output Level +37dBmV
Description
The power amplifier is designed for base stations and repeater systems.
GaAs MMIC is used and attached on a copper carrier of 12 pin air cavity package with dual supply voltage.
*The data in this spec sheet is valid only for 75 ohm application. 50 ohm data is in a separate spec sheet.
Operating Ranges
PARAMETER
Device Voltage
Case Temperature
UNIT
VDC
℃
MIN
TYP
+5
-
MAX
+5.3
+85
-40
Absolute Minimum and Maximum Ratings
PARAMETER
UNIT
VDC
mA
MIN
MAX
Device Voltage
+5.5
+320
+10
Device Current
RF Input Power
dBm
℃
Storage Temperature
-40
+150
Specifications
T=25℃, Vcc=5.0V, 75Ω system
Parameter
Frequency Range
Supply Voltage
Single Ended CATV Evaluation Circuit
Current
Units
MHz
V
Minimum
Typical
3MHz~2.0GHz
Maximum
Condition
5
Vcc=5V
mA
dB
dB
dB
200
220
16
250
S21-Gain
3MHz
50MHz
S21-Gain
14.5
14.5
15
S21-Gain
15
2000MHz
Reverse ( 3 ~ 200MHz )
S11-Input Return Loss
S22-Output Return Loss
Noise Figure
dB
dB
-16
-16
5.5
-13
-13
OIP3
dBm
dBm
41
20
43
22
+10dBm/2 tone separated by 1MHz
At 100MHz
OIP1
Forward ( 50 ~ 870MHz )
S11-Input Return Loss
dB
dB
-11
-11
-8
-8
S22-Output Return Loss
OIP3
OIP1
dBm
dBm
dB
36
20
38
22
+10dBm/2 tone separated by 1MHz
At 800MHz
Noise Figure
CSO
50 - 870MHz
CTB
4
6
dBc
dBc
dBc
dBc
dBc
dBc
-63
-60
-60
-70
-73
-70
-55
-60
-55
135 channels,+37dBmV/ch,Single
135 channels,+37dBmV/ch,Single
135 channels,+37dBmV/ch,Single
8 channels,+45dBmV/ch,Single
8 channels,+45dBmV/ch,Single
8 channels,+45dBmV/ch,Single
XMD
CSO
3 - 150MHz
CTB
XMD
▪ Tel : 82-31-250-5011
▪ rfsales@rfhic.com
▪ All specifications may change without notice.
▪ Version 2.0
MMIC
AP2301 (Old part#: AP230S12)
Application Circuit: 3MHz ~ 200MHz
S-Parameters
Noise Figure
8
7
6
5
4
3
30
20
S21
10
0
-10
S22
-20
S11
-30
5
0
30
60
90
120
150
180
210
240
270
300
5
50
100
150
200
250
Frequency(MHz)
Frequency(MHz)
P1dB
OIP3
50
45
40
35
30
25
20
15
25
20
15
10
5
0
5
50
100
150
200
250
5
50
100
150
200
250
Frequency(MHz)
Frequency(MHz)
Level: +45dBmV
FRQ XMD(NCTA)
Tilt: 8CH FLAT
CTB_RAW
79.9
CTB_COR N-FLR
CSU_RAW
92.4
CSU_COR
96.7
CSU_FRQ CSL_RAW CSL_COR
CSL_FRQ
5.99
7
31
49
72.2
80.1
78.8
80.1
93.6
7.63
32
71.7
76.6
90.5
71.7
76.8
94.8
72.8
72.1
78.6
79.8
92.1
91.8
78.1
78.2
78.4
78.4
29.99
48.31
49.99
▪ Tel : 82-31-250-5011
▪ rfsales@rfhic.com
▪ All specifications may change without notice.
▪ Version 2.0
MMIC
AP2301 (Old part#: AP230S12)
Application Circuit: 30MHz ~ 2000MHz
Performance Charts (Vdc=5V, Id=220mA, Tc=25℃)
S-parameter Vs. Frequency
Noise Figure Vs. Frequency
6
5
4
3
2
1
0
20
10
17
15
13
11
9
0
-10
-20
-30
-40
7
5
30
200
400
600
800
1000
1200
1400
1600
1800
2000
0
200
400
600
800
1000
1200
1400
1600
1800
2000
Freq(MHz)
Freq(MHz)
S22
NF(dB)
S11
Gain(dB)
OIP3 Vs. Frequency
P1dB Vs. Frequency
45
41
37
33
29
25
21
30
25
20
15
10
5
0
30
200
400
600
800
1000
1200
1400
1600
1800
2000
30
200
400
600
800
1000
1200
1400
1600
1800
2000
Freq(MHz)
Freq(MHz)
P1dB
OIP3(dBm)
▪ Tel : 82-31-250-5011
▪ rfsales@rfhic.com
▪ All specifications may change without notice.
▪ Version 2.0
MMIC
AP2301 (Old part#: AP230S12)
Multi-Tone Test 135ch@+30dBmV (Vcc +5V)
Level: +30dBm
Tilt: FLAT_CH135
FRQ
XMD(NCTA)
74.2
CTB_RAW
75.5
CTB_COR
79.8
N-FLR
76.9
CSU_RAW
76.6
76.1
77.5
77.4
76
CSU_COR
80.9
CSU_FRQ
55.93
CSL_RAW
76
CSL_COR
80.3
CSL_FRQ
54
55.25
77.25
75
76.1
80.4
77.1
77.6
77.7
76.3
77
80.4
77.99
76.9
77.1
77.1
75.9
76.6
74.9
75.4
74.8
73.2
81.2
76.25
107.99
209.99
329.98
443.98
545.99
635.99
743.92
858.49
109.25
211.25
331.25
445.25
547.25
637.25
745.25
859.25
74.9
76.1
80.4
81.8
109.96
212.31
331.88
446.48
548.42
638.49
746.48
860.48
81.4
74.8
76.1
80.4
81.8
81.4
75.7
74.9
79.2
80.4
80.2
76.3
75.6
79.9
76.7
74.9
75
81.1
81
77.7
74.3
78.7
75.3
75.8
75.2
73.6
79.2
79.2
77.4
74.5
78.8
79.3
79.7
77.4
73.9
78.3
74.2
72.6
78.6
79.2
77.8
72.6
76.9
77
77.5
Min
Max
74.2
77.8
72.6
76.1
76.9
80.4
73.6
77.7
72.6
77.5
77
55.93
73.2
77.1
77.5
81.4
54
81.8
860.48
858.49
Multi-Tone Test 135ch@+37dBmV (Vcc +5V)
Level: +37dBmV
Tilt: 135CH FLAT
CTB_RAW
FRQ
XMD(NCTA)
60.4
CTB_COR
66.9
N-FLR
82.9
CSU_RAW
80.2
CSU_COR
83.2
68.7
82.9
77
CSU_FRQ
55.99
78
CSL_RAW
67.4
CSL_COR
67.5
CSL_FRQ
53.99
55.25
66.7
68.3
66.4
66.9
65.7
66.2
66.3
66.1
66.6
67
77.25
60.9
61
68.4
83.2
84.1
83.6
82.5
82.9
81.4
81.6
81.5
79.7
68.5
82.9
87.2
76.22
109.25
211.25
331.25
445.25
547.25
637.25
745.25
859.25
66.4
80.3
110
70.4
70.6
108
60.4
61.6
61.5
62.7
62.5
62.8
63.3
67
76.1
212.5
332.5
446.49
548.5
638.49
746.5
860.49
71.5
71.8
209.99
329.99
443.99
545.99
635.98
743.99
858.49
65.7
73.3
73.9
73.7
73
72.3
72.8
66.3
73.2
73.8
74.4
66.4
72.4
74.1
75.1
66.3
73.2
73.9
74.7
76.1
75.9
77.2
66.8
73.9
78.1
80.6
67.2
74.4
78.8
83.1
Min
Max
60.4
63.3
65.7
68.3
65.7
68.4
79.7
84.1
68.5
80.3
68.7
83.2
55.99
67.4
82.9
67.5
87.2
53.99
860.49
858.49
▪ Tel : 82-31-250-5011
▪ rfsales@rfhic.com
▪ All specifications may change without notice.
▪ Version 2.0
MMIC
AP2301 (Old part#: AP230S12)
ESD PROTECTION
For a safe use in all situations, it is recommended to have proper ESD control techniques while the device is being handled. Here are some
recommended precautions;
- Person at a workbench should be earthed via a wrist strap and a resistor.
- All mains-powered equipment should be connected to the mains via an earth-leakage switch.
- Equipment cases should be grounded.
- Relative humidity should be maintained between 40% and 50%.
- An ionizer is recommended.
- Keep static materials, such as plastic envelopes and plastic trays etc. away from the workbench
Dimension : PMBG-SQFP-12
Outline Drawing
Block Diagram
4
4
3
1
7
AMP2
AMP1
3
7
E
C
1
10
12
10
12
D
F
B
A
(SQ.)
(SQ.)
INCH No.
MM
Function
Pin No.
0.282
0.2
7.16
5.08
6.25
1.75
0.38
0.76
0.51
1.02
0.36
2.1
A
B
C
D
E
Input
7, 9
1, 3
0.246
0.069
0.015
0.03
0.2
Land Pattern
4
Output , Bias
1.02
2,4, 5, 6,8, 10, 11, 12
Backside Copper
F
Ground
3
G
H
J
0.4
F
0.14
0.83
0.32
G
K
M
1
0.8
(SQ.)
J
H
K
M
RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time without notice. RFHIC do not
assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or
incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for
inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase orders. RFHIC products are not
intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells
such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC and its directors, officers, stockholders,
employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of
whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC.
▪ Tel : 82-31-250-5011
▪ rfsales@rfhic.com
▪ All specifications may change without notice.
▪ Version 2.0
相关型号:
©2020 ICPDF网 联系我们和版权申明