NIPXIE-6368 [NI]
NI X Series Multifunction Data Acquisition;
| 型号： | NIPXIE-6368 |
| 厂家： | 
National Instruments |
| 描述： | NI X Series Multifunction Data Acquisition |
| 文件： | 总18页 (文件大小：1910K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Technical Sales
United States
(866) 531-6285
info@ni.com
Requirements and Compatibility | Ordering Information | Detailed Specifications | Pinouts/Front Panel Connections
For user manuals and dimensional drawings, visit the product page resources tab on ni.com.
Last Revised: 2013-01-22 20:09:32.0
NI X Series Multifunction Data Acquisition
Overview
NI X Series devices for USB, PCI Express, and PXI Express are the most advanced data acquisition devices ever designed by National Instruments. They feature significant
improvements in onboard timing and triggering and optimizations for use with multicore PCs. X Series devices integrate high-performance analog, digital, and counter/timer
functionality into a single device, making them well-suited for a broad range of applications from basic data logging to control and test automation.
Back to Top
Requirements and Compatibility
OS Information
Driver Information
Software Compatibility
PharLap
NI-DAQmx
ANSI C/C++
Real-Time OS
Windows 7
LabVIEW
LabVIEW Real-Time Module
LabWindows/CVI
Measurement Studio
SignalExpress
Windows 7 64-bit
Windows Vista x64/x86
Windows XP
Visual Basic
Visual Studio .NET
Back to Top
Comparison Tables
Analog
Outputs
(AO)
Model
Number Inputs (AI)
Analog
Max AI Sampling
Rate (1-Channel)
Max Total AI
Throughput
Max AO
Update Rate I/O Lines
Digital
Max Digital
I/O Rate
Bus
Triggering
PCI Express
PCI Express
PCI Express
6320
6321
6323
16
16
32
250 kS/s
250 kS/s
250 kS/s
250 kS/s
0
2
4
-
24
24
48
1 MHz
1 MHz
1 MHz
Digital
Digital
Digital
250 kS/s
250 kS/s
900 kS/s
900 kS/s
USB, PCI Express,
PXI Express
6341
16
32
16
500 kS/s
500 kS/s
1.25 MS/s
500 kS/s
500 kS/s
1.25 MS/s
2
4
2
900 kS/s
900 kS/s
2.86 MS/s
24
48
24
1 MHz
1 MHz
10 MHz
Digital
Digital
USB, PCI Express 6343
USB, PCI Express 6351
Analog,
Digital
Analog,
Digital
USB, PCI Express 6353
32
1.25 MS/s
1.25 MS/s
4
2.86 MS/s
48
10 MHz
1/18
www.ni.com
Analog
Outputs
(AO)
Model
Number Inputs (AI)
Analog
Max AI Sampling
Rate (1-Channel)
Max Total AI
Throughput
Max AO
Update Rate I/O Lines
Digital
Max Digital
I/O Rate
Bus
Triggering
USB, PCI Express,
PXI Express
Analog,
Digital
6361
6363
16
32
2 MS/s
2 MS/s
2
4
2
4
2
4
2.86 MS/s
2.86 MS/s
3.33 MS/s
3.33 MS/s
3.33 MS/s
3.33 MS/s
24
48
24
48
24
48
10 MHz
10 MHz
10 MHz
10 MHz
10 MHz
10 MHz
USB, PCI Express,
PXI Express
Analog,
Digital
2 MS/s
2 MS/s
8
Analog,
Digital
USB, PXI Express 6356
1.25 MS/s/channel
1.25 MS/s/channel
2 MS/s/channel
2 MS/s/channel
10 MS/s
20 MS/s
16 MS/s
32 MS/s
simultaneous
16
Analog,
Digital
PXI Express
6358
simultaneous
8
Analog,
Digital
USB, PXI Express 6366
simultaneous
16
Analog,
Digital
PXI Express
6368
simultaneous
Back to Top
Application and Technology
NI-STC3 Timing and Synchronization Technology
NI X Series multifunction DAQ devices include the NI-STC3, an ASIC designed by NI for advanced timing, triggering, and synchronization. This technology includes the following:
Four counter/timers with more functionality than ever before, such as the ability to create a finite pulse train with a single counter
A 100 MHz timebase for faster triggering response and more precise generation of analog and digital sample clocks
Independent analog and digital timing engines
Retriggerable measurement tasks for analog I/O, digital I/O, and counter/timers
Native PCI Express Interface
In contrast to a PCI-to-PCI Express bridge chip, which limits the bandwidth of the device to that of the PCI bus and introduces latency, PCI Express and PXI Express X Series
devices use a native x1 PCI Express interface that provides up to 250 MB/s in each direction. National Instruments has also optimized this interface for low latency in single-point
control applications. You can use X Series PCI Express boards in any PCI Express slot from x1 up to x16.
NI Signal Streaming
USB X Series devices include patented NI Signal Streaming, a technology that uses message-based instructions and device-side intelligence to ensure high-speed, bidirectional
data transfer over USB. With USB X Series, you can concurrently transfer analog, digital, and counter data in both directions. The total device throughput over USB is
PC-dependent; on some systems, up to 32 MB/s sustained transfers are possible.
Improved Mechanical Enclosure
USB X Series devices introduce a redesigned, extruded aluminum enclosure with an easy-access magnetic lid. This lid keeps signal wiring secured and shielded and can be
opened easily when needed. The underside of the lid has a device-specific pinout label so that you can quickly determine the corresponding screw terminals for a given channel.
The enclosure also includes a lockable USB port to prevent accidental removal during operation and a security slot that can be used with ordinary laptop locks to secure the
device to a desk or workstation.
Board-Only Form Factor for OEM Applications
USB X Series devices are also available in a board-only form factor that is intended for high-volume OEM applications. These devices include standard 34-pin and 50-pin IDC
connectors for easy mating to a daughter board, which can contain custom signal conditioning and connectivity.
2/18
www.ni.com
Software Enhancements
PCI Express and PXI Express X Series devices are compatible with NI-DAQmx Version 9.0 or later driver software. USB X Series devices require NI-DAQmx Version 9.2 or later.
More than a basic driver, NI-DAQmx includes the NI Measurement & Automation Explorer (MAX) configuration utility, the DAQ Assistant for rapid development of basic
applications, and hundreds of example programs for NI LabVIEW and text-based languages. NI-DAQmx also includes LabVIEW SignalExpress LE basic data-logging software.
NI-DAQmx 9.0 introduces the ability to synchronize multiple PCI Express or PXI Express X Series devices with a single NI-DAQmx task, which previously took several tasks and
manual routing of clocks and triggers. This version also introduces the fastest, easiest way to acquire measurement data to disk in the Technical Data Management Streaming
(TDMS) format with the new Configure Logging VI. NI-DAQmx 9.2 introduces the ability to log acquired data to TDMS files within the DAQ Assistant Express VI.
With NI-DAQmx and intuitive LabVIEW graphical programming, you can easily develop applications that take advantage of today's multicore systems so you can perform
acquisition, signal processing, and data logging on different CPU cores.
Simultaneous Sampling X Series
Some X Series devices for USB and PXI Express offer simultaneous sampling, with the same channel counts and connectivity as multiplexed devices.
Unlike multiplexed devices that reduce sampling rates as you add more channels, you can use simultaneous sampling devices to maintain sampling rates as you expand the
number of channels. Simultaneous sampling X Series devices are available with up to 16 differential channels per device, and, with PXI Express, you can sample more than 200
channels simultaneously.
Simultaneous X Series devices for USB include 32 or 64 MS onboard memory to ensure the transfer of finite acquisitions, even in the presence of heavy USB traffic.
Applications
Acquisition and Visualization
X Series devices include analog, digital, and counter circuitry for the most common types of static and waveform measurements. With LabVIEW, you can easily acquire the data
and view it on a variety of graphs and displays. You can use configuration-based wizards called Express VIs to take measurements and perform signal processing with minimal
programming.
Data Logging
Whether you are validating a new hardware design, monitoring conditions on a factory floor, or recording temperature changes during a scientific experiment, you need to take
measurements, visualize your data, and often log it to disk. With X Series multifunction DAQ, you can develop a user-defined measurement system by using intuitive graphical
programming software and incorporating the exact visualization, analysis, and data-logging capabilities your application requires.
Control Systems
If you need to control the temperature of a room, the speed of a motor, or the pressure of hydraulic fluids, you can use X Series DAQ hardware to connect sensors and actuators
to your computer and build the control system that meets your exact application needs. The low-latency PCI Express bus improves single-point I/O performance, and with
LabVIEW software and NI-DAQmx driver software, you can easily take sensor measurements, compare values to a setpoint, and update output signals. X Series devices also
have four counter/timers for performing quadrature encoder measurements, pulse-width modulation, pulse train generation, frequency measurements, and much more, making
them ideal for basic motor control.
Due to the inherent higher latency of USB as compared to PCI Express, National Instruments recommends that you use PCI Express or PXI Express X Series devices for
applications that require single-point control or deterministic operation.
Test Automation
X Series DAQ hardware provides analog inputs, analog outputs, hardware-timed digital I/O, and four counter/timers on a single device, making it a cost-effective option for basic
device under test characterization and test automation. With NI-DAQmx software, you can easily synchronize acquisition or generation on multiple subsystems, such as an analog
input and analog output channel. In addition, you can easily synchronize two or more X Series devices for further expansion by using a RTSI cable for PCI Express boards or over
the PXI Express backplane for PXI Express modules. It is possible to synchronize two or more USB X Series devices by exporting sample or reference clocks from the master
device to the slave device, and using external wiring.
Compatible Accessories
PCI Express and PXI Express X Series devices use either a single or dual-stack 68-pin VHDCI female connector, depending on the number of analog and digital channels on the
device. National Instruments offers several options for cables, from 0.5 m to 10 m and from low-cost to high-performance with shielding. Connector blocks are available with screw
terminal, BNC, or custom connector types.
For measurements requiring signal conditioning, you can use X Series with SCXI signal conditioning modules.
You can purchase DIN-rail or panel mount kits for USB X Series devices as well as replacement power supplies and latching USB cables. See the model page for ordering
information.
Upgrading
Because X Series DAQ devices use the same NI-DAQmx driver software as NI M Series DAQ devices, upgrading is easy. In addition, PCI Express and PXI Express X Series
devices use the same VHDCI connector as PCI and PXI M Series. You can reuse your code and preserve your investment in accessories. The pinouts for X Series devices are
backward-compatible with M Series devices.
Back to Top
Ordering Information
For a complete list of accessories, visit the product page on ni.com.
Products
Part Number
Recommended Accessories
Part Number
NI PXIe-6366
NI PXIe-6366
781057-01
Cable: Shielded - SHC68-68-EPM Cable (2m)
192061-02
782536-01
Requires: 1 Cable , 1 Connector Block ;
**Also Available: [Unshielded]
Connector Block: Spring-Screw_Terminals - SCB-68A
**Also Available: [BNC_Terminals, Custom]
3/18
www.ni.com
NI PXIe-6368
NI PXIe-6368
781058-01
Connector 0:
Requires: 1 Cable , 1 Connector Block ;
Cable: Shielded - SHC68-68-EPM Cable (2m)
192061-02
782536-01
**Also Available: [Unshielded]
Connector Block: Spring-Screw_Terminals - SCB-68A
**Also Available: [BNC_Terminals]
Connector 1:
Cable: Shielded - SHC68-68-EPM Cable (2m)
192061-02
782536-01
**Also Available: [Unshielded]
Connector Block: Spring-Screw_Terminals - SCB-68A
**Also Available: [BNC_Terminals]
Back to Top
Software Recommendations
LabVIEW Professional
Development System for
Windows
SignalExpress for Windows
Advanced software tools for large project
development
Quickly configure projects without
programming
Automatic code generation using DAQ
Assistant and Instrument I/O Assistant
Control over 400 PC-based and stand-alone
instruments
Tight integration with a wide range of
hardware
Log data from more than 250 data acquisition
devices
Advanced measurement analysis and digital
signal processing
Perform basic signal processing, analysis,
and file I/O
Open connectivity with DLLs, ActiveX, and
.NET objects
Scale your application with automatic
LabVIEW code generation
Capability to build DLLs, executables, and
MSI installers
Create custom reports or easily export data
to LabVIEW, DIAdem or Microsoft Excel
NI LabWindows™/CVI for
Windows
NI Measurement Studio
Professional Edition
Real-time advanced 2D graphs and charts
Customizable graphs and charts for WPF,
Windows Forms, and ASP.NET Web Forms
UI design
Complete hardware compatibility with IVI,
VISA, DAQ, GPIB, and serial
Analysis libraries for array operations, signal
generation, windowing, filters, signal
processing
Analysis tools for array manipulation, signal
processing statistics, and curve fitting
Simplified cross-platform communication with
network variables
Hardware integration support with native
.NET data acquisition and instrument control
libraries
Measurement Studio .NET tools (included in
LabWindows/CVI Full only)
Automatic code generation for all NI-DAQmx
data acquisition hardware
The mark LabWindows is used under a
license from Microsoft Corporation.
Intelligent and efficient data-logging libraries
for streaming measurement data to disk
Support for Microsoft Visual Studio .NET
2012/2010/2008
Back to Top
Support and Services
System Assurance Programs
NI system assurance programs are designed to make it even easier for you to own an NI system. These programs include configuration and deployment services for your NI PXI,
CompactRIO, or Compact FieldPoint system. The NI Basic System Assurance Program provides a simple integration test and ensures that your system is delivered completely
assembled in one box. When you configure your system with the NI Standard System Assurance Program, you can select from available NI system driver sets and application
development environments to create customized, reorderable software configurations. Your system arrives fully assembled and tested in one box with your software preinstalled.
When you order your system with the standard program, you also receive system-specific documentation including a bill of materials, an integration test report, a recommended
maintenance plan, and frequently asked question documents. Finally, the standard program reduces the total cost of owning an NI system by providing three years of warranty
coverage and calibration service. Use the online product advisors at ni.com/advisor to find a system assurance program to meet your needs.
Calibration
NI measurement hardware is calibrated to ensure measurement accuracy and verify that the device meets its published specifications. To ensure the ongoing accuracy of your
measurement hardware, NI offers basic or detailed recalibration service that provides ongoing ISO 9001 audit compliance and confidence in your measurements. To learn more
about NI calibration services or to locate a qualified service center near you, contact your local sales office or visit ni.com/calibration.
Technical Support
Get answers to your technical questions using the following National Instruments resources.
4/18
www.ni.com
Support - Visit ni.com/support to access the NI KnowledgeBase, example programs, and tutorials or to contact our applications engineers who are located in NI sales
offices around the world and speak the local language.
Discussion Forums - Visit forums.ni.com for a diverse set of discussion boards on topics you care about.
Online Community - Visit community.ni.com to find, contribute, or collaborate on customer-contributed technical content with users like you.
Repair
While you may never need your hardware repaired, NI understands that unexpected events may lead to necessary repairs. NI offers repair services performed by highly trained
technicians who quickly return your device with the guarantee that it will perform to factory specifications. For more information, visit ni.com/repair.
Training and Certifications
The NI training and certification program delivers the fastest, most certain route to increased proficiency and productivity using NI software and hardware. Training builds the skills
to more efficiently develop robust, maintainable applications, while certification validates your knowledge and ability.
Classroom training in cities worldwide - the most comprehensive hands-on training taught by engineers.
On-site training at your facility - an excellent option to train multiple employees at the same time.
Online instructor-led training - lower-cost, remote training if classroom or on-site courses are not possible.
Course kits - lowest-cost, self-paced training that you can use as reference guides.
Training memberships and training credits - to buy now and schedule training later.
Visit ni.com/training for more information.
Extended Warranty
NI offers options for extending the standard product warranty to meet the life-cycle requirements of your project. In addition, because NI understands that your requirements may
change, the extended warranty is flexible in length and easily renewed. For more information, visit ni.com/warranty.
OEM
NI offers design-in consulting and product integration assistance if you need NI products for OEM applications. For information about special pricing and services for OEM
customers, visit ni.com/oem.
Alliance
Our Professional Services Team is comprised of NI applications engineers, NI Consulting Services, and a worldwide National Instruments Alliance Partner program of more than
700 independent consultants and integrators. Services range from start-up assistance to turnkey system integration. Visit ni.com/alliance.
Back to Top
Detailed Specifications
Specifications listed below are typical at 25 °C unless otherwise noted. Refer to the X Series User Manual for more information about NI PXIe-6366/6368 and NI USB-6366 (32
MS and 64 MS) devices.
Analog Input
Number of channels
8 differential
16 differential
NI 6366
NI 6368
16 bits
ADC resolution
No missing codes guaranteed
DNL
Refer to the AI Absolute Accuracy Table
INL
Sampling rate
2.00 MS/s per channel
No minimum
50 ppm of sample rate
Maximum
Minimum
Timing accuracy
10 ns
Timing resolution
DC
Input coupling
±10 V, ±5 V, ±2 V, ±1 V
Input range
Maximum working voltage for all analog inputs
±11 V for all ranges, Measurement Category I
Positive input (AI+)
±11 V for all ranges, Measurement Category I
Negative input (AI–)
5/18
www.ni.com
Caution Do not use for measurements within Categories II, III, and IV.
CMRR (at 60 Hz)
75 dB
1 MHz
Bandwidth
–80 dBFS
THD
Input impedance
Device on
>100 GΩ in parallel with 10 pF
>100 GΩ in parallel with 10 pF
AI– to AI GND
AI+ to AI GND
Device off
2 kΩ
AI+ to AI GND
2 kΩ
AI– to AI GND
±10 pA
Input bias current
Crosstalk (at 100 kHz)
Adjacent channels
Non-adjacent channels
Input FIFO size
NI PXIe-6366/6368
NI USB-6366 (32 MS)
NI USB-6366 (64 MS)
Data transfers
–80 dB
–100 dB
8,182 samples shared among channels used
32 MS shared among channels used
64 MS shared among channels used
DMA (scatter-gather), programmed I/O
USB Signal Stream, programmed I/O
NI PXIe-6366/6368
NI USB-6366
Overvoltage protection (AI+, AI–)
Device on
±36 V
±15 V
Device off
±20 mA max/AI pin
Input current during overvoltage conditions
Analog Triggers
1
Number of triggers
Source
AI <0..7>, APFI 0
NI 6366
NI 6368
Functions
AI <0..15>, APFI <0, 1>
Start Trigger, Reference Trigger, Pause Trigger, Sample Clock,
Sample Clock Timebase
Source level
AI <0..15>
APFI <0, 1>
Resolution
Modes
±full scale
±10 V
16 bits
Analog edge triggering, analog edge triggering with hysteresis, and analog
window triggering
Bandwidth (–3 dB)
AI <0..15>
3.4 MHz
3.9 MHz
APFI <0, 1>
Accuracy
±1% of range
6/18
www.ni.com
APFI <0, 1> characteristics
Input impedance
Coupling
10 kΩ
DC
Protection
±30 V
±15 V
Power on
Power off
Analog Output
Number of channels
NI 6366
2
4
NI 6368
16 bits
DAC resolution
DNL
±1 LSB max
16 bit guaranteed
Monotonicity
Refer to the AO Absolute Accuracy Table
Accuracy
Update rate
Maximum
3.3 MS/s
One channel
3.3 MS/s
Two channels
Three channels
Four channels
Minimum
3.3 MS/s
3.3 MS/s
No minimum
50 ppm of sample rate
Timing accuracy
Timing resolution
Output range
10 ns
±10 V, ±5 V, ±external reference on APFI <0, 1>
DC
Output coupling
Output impedance
Output current drive
Overdrive protection
Overdrive current
Power-on state
Power-on/off glitch
NI PXIe-6366/6368
NI USB-6366
0.4 Ω
±5 mA
±25 V
10 mA
±5 mV
1.5 V peak for 200 ms
1
1.5 V peak for 200 ms
8,191 samples shared among channels used
Output FIFO size
Data transfers
NI PXIe-6366/6368
NI USB-6366
DMA (scatter-gather), programmed I/O
USB Signal Stream, programmed I/O
AO waveform modes:
Non-periodic waveform
Periodic waveform regeneration mode from onboard FIFO
Periodic waveform regeneration from host buffer including dynamic update
7/18
www.ni.com
Settling time, full-scale step
15 ppm (1 LSB)
2 μs
20 V/μs
Slew rate
Glitch energy at midscale transition
6 nV s
±10 V range
External Reference
APFI <0, 1> characteristics
10 kΩ
DC
Input impedance
Coupling
Protection
Power on
Power off
Range
±30 V
±15 V
±11 V
20 V/μs
Slew rate
Calibration (AI and AO)
15 minutes
1 year
Recommended warm-up time
Calibration interval
AI Absolute Accuracy Table
Nominal Range
Residual Gain Error
(ppm of Reading)
Gain
Reference
Tempco
Residual Offset
Error (ppm of
Range)
Offset Tempco
INL Error
(ppm of
Range)
Random
Absolute Accuracy
*
Tempco
(ppm/°C)
(ppm of
Noise, σ (μV
at Full Scale (μV)
Positive
Negative
(ppm/°C)
Range/°C)
)
rms
Full Scale Full Scale
10
5
–10
–5
95
8
8
8
8
5
5
5
5
15
35
36
42
50
46
252
134
71
2498
1289
528
102
102
120
15
15
15
46
46
46
2
–2
1
–1
61
291
AbsoluteAccuracy = Reading · (GainError) + Range · (OffsetError) + NoiseUncertainty
GainError = ResidualAIGainError + GainTempco · (TempChangeFromLastInternalCal) + ReferenceTempco · (TempChangeFromLastExternalCal)
OffsetError = ResidualAIOffsetError + OffsetTempco · (TempChangeFromLastInternalCal) + INL_Error
NoiseUncertainty
For a coverage factor of 3 σ and averaging 10,000 points.
*
Absolute accuracy at full scale on the analog input channels is determined using the following assumptions:
TempChangeFromLastExternalCal = 10 °C
TempChangeFromLastInternalCal = 1 °C
number_of_readings = 10,000
CoverageFactor = 3 σ
For example, on the 10 V range, the absolute accuracy at full scale is as follows:
GainError = 95 ppm + 8 ppm · 1 + 5 ppm · 10
GainError = 153 ppm
8/18
www.ni.com
OffsetError = 15 ppm + 35 ppm · 1 + 46 ppm
OffsetError = 96 ppm
NoiseUncertainty=
NoiseUncertainty = 7.6 μV
AbsoluteAccuracy = 10 V · (GainError) + 10 V · (OffsetError) + NoiseUncertainty
Accuracies listed are valid for up to two years from the device external calibration.
AO Absolute Accuracy Table
AbsoluteAccuracy = 2,498 μV
Nominal Range
Residual Gain Error
(ppm of Reading)
Gain
Reference
Tempco
Residual Offset Error
(ppm of Range)
Offset Tempco
(ppm of Range/°C)
INL Error
(ppm of
Range)
Absolute Accuracy at
*
Tempco
(ppm/°C)
Full Scale (μV)
Positive
Negative
(ppm/°C)
Full Scale Full Scale
10
5
–10
–5
110
117
17
5
5
65
65
1
64
64
3,066
1,526
8
1
*
Absolute Accuracy at full scale numbers is valid immediately following internal calibration and assumes the device is operating within 10 °C of the last external calibration.
Accuracies listed are valid for up to two years from the device external calibration.
AbsoluteAccuracy = OutputValue · (GainError) + Range · (OffsetError)
GainError = ResidualGainError + GainTempco · (TempChangeFromLastInternalCal) + ReferenceTempco · (TempChangeFromLastExternalCal)
OffsetError = ResidualOffsetError + AOOffsetTempco · (TempChangeFromLastInternalCal) + INL_Error
Digital I/O/PFI
Static Characteristics
Number of channels
24 total, 8 (P0.<0..7>), 16 (PFI <0..7>/P1, PFI <8..15>/P2)
NI 6366
48 total, 32 (P0.<0..31>), 16 (PFI <0..7>/P1, PFI <8..15>/P2)
NI 6368
D GND
Ground reference
Each terminal individually programmable as input or output
Direction control
50 kΩ typ, 20 kΩ min
Pull-down resistor
±20 V on up to two pins
2
Input voltage protection
Waveform Characteristics (Port 0 Only)
Terminals used
Port 0 (P0.<0..7>)
Port 0 (P0.<0..31>)
NI 6366
NI 6368
Port/sample size
Up to 8 bits
Up to 32 bits
NI 6366
NI 6368
2,047 samples
Waveform generation (DO) FIFO
255 samples
Waveform acquisition (DI) FIFO
DI Sample Clock frequency
0 to 10 MHz, system and bus activity dependent
NI PXIe-6366/6368
0 to 1 MHz system and bus activity dependent
NI USB-6366
DO Sample Clock frequency
NI PXIe-6366/6368
0 to 10 MHz
Regenerate from FIFO
0 to 10 MHz, system and bus activity dependent
Streaming from memory
NI USB-6366
0 to 10 MHz
Regenerate from FIFO
0 to 1 MHz system and bus activity dependent
9/18
www.ni.com
Streaming from memory
Data transfers
DMA (scatter-gather), programmed I/O
USB Signal Stream, programmed I/O
160 ns, 10.24 μs, 5.12 ms, disable
NI PXIe-6366/6368
NI USB-6366
Digital line filter settings
PFI/Port 1/Port 2 Functionality
Functionality
Static digital input, static digital output, timing input, timing output
Many AI, AO, counter, DI, DO timing signals
Timing output sources
90 ns, 5.12 μs, 2.56 ms, custom interval, disable; programmable high and
low transitions; selectable per input
Debounce filter settings
Recommended Operation Conditions
Level
Min
Max
Input high voltage (V
Input low voltage (V
)
2.2 V 5.25 V
IH
)
0 V
0.8 V
IL
Output high current (I
)
OH
—
—
–24 mA
–16 mA
P0.<0..7>
PFI <0..15>/P1/P2
Output low current (I
)
OL
—
—
24 mA
16 mA
P0.<0..7>
PFI <0..15>/P1/P2
Electrical Characteristics
Level
Min
Max
Positive-going threshold (VT+)
Negative-going threshold (VT–)
—
2.2 V
—
0.8 V
Delta VT hysteresis (VT+ – VT–) 0.2 V
—
I
I
input low current (V = 0 V)
in
—
—
–10 μA
250 μA
IL
input high current (V = 5 V)
in
IH
Digital I/O Characteristics
10/18
www.ni.com
General-Purpose Counter/Timers
4
Number of counter/timers
Resolution
32 bits
Edge counting, pulse, pulse width, semi-period, period, two-edge separation
Counter measurements
Position measurements
X1, X2, X4 quadrature encoding with Channel Z reloading;
two-pulse encoding
Pulse, pulse train with dynamic updates, frequency division, equivalent time
sampling
Output applications
100 MHz, 20 MHz, 100 kHz
Internal base clocks
External base clock frequency
NI PXIe-6366/6368
NI USB-6366
0 MHz to 25 MHz; 0 MHz to 100 MHz on PXIe-DSTAR<A, B>
0 MHz to 25 MHz
50 ppm
Base clock accuracy
Inputs
Gate, Source, HW_Arm, Aux, A, B, Z, Up_Down, Sample Clock
Routing options for inputs
NI PXIe-6366/6368
Any PFI, PXIe-DSTAR<A, B>, PXI_TRIG, PXI_STAR, analog trigger,
many internal signals
Any PFI, analog trigger, many internal signals
NI USB-6366
FIFO
127 samples per counter
Data transfers
NI PXIe-6366/6368
Dedicated scatter-gather DMA controller for each counter/timer,
programmed I/O
USB Signal Stream, programmed I/O
NI USB-6366
Frequency Generator
1
Number of channels
Base clocks
20 MHz, 10 MHz, 100 kHz
1 to 16
50 ppm
Divisors
Base clock accuracy
Output can be available on any PFI terminal.
Phase-Locked Loop (PLL)
1
Number of PLLs
11/18
www.ni.com
Reference clock locking frequencies
Reference Signal Locking Input Frequency (MHz)
PXIe
PXIe_DSTAR<A, B> 10, 20, 100
USB
—
—
—
—
10
PXI_STAR
10, 20
100
PXIe_CLK100
PXI_TRIG <0..7>
PFI <0..15>
10, 20
10, 20
100 MHz Timebase; other signals derived from 100 MHz Timebase
including 20 MHz and 100 kHz Timebases
Output of PLL
External Digital Triggers
Source
Any PFI, PXIe-DSTAR<A, B>, PXI_TRIG, PXI_STAR
Any PFI
NI PXIe-6366/6368
NI USB-6366/6368
Polarity
Software-selectable for most signals
Start Trigger, Reference Trigger, Pause Trigger, Sample Clock,
Sample Clock Timebase
Analog input function
Start Trigger, Pause Trigger, Sample Clock, Sample Clock Timebase
Gate, Source, HW_Arm, Aux, A, B, Z, Up_Down, Sample Clock
Start Trigger, Pause Trigger, Sample Clock, Sample Clock Timebase
Analog output function
Counter/timer functions
Digital waveform generation (DO) function
Digital waveform acquisition (DI) function
Start Trigger, Reference Trigger, Pause Trigger, Sample Clock,
Sample Clock Timebase
Device-To-Device Trigger Bus
Input source
PXI_TRIG <0..7>, PXI_STAR, PXIe-DSTAR<A, B>
None
NI PXIe-6366/6368
NI USB-6366
Output destination
NI PXIe-6366/6368
NI USB-6366
PXI_TRIG <0..7>, PXIe-DSTARC
None
10 MHz Clock; frequency generator output; many internal signals
Output selections
Debounce filter settings
90 ns, 5.12 μs, 2.56 ms, custom interval, disable; programmable high and
low transitions; selectable per input
Bus Interface
NI PXIe-6366/6368
Form factor
x1 PXI Express peripheral module, specification rev 1.0 compliant
x1 and x4 PXI Express or PXI Express hybrid slots
Slot compatibility
DMA channels
8, analog input, analog output, digital input, digital output, counter/timer 0,
counter/timer 1, counter/timer 2, counter/timer 3
All NI PXIe-6366/6368 devices may be installed in PXI Express slots or PXI Express hybrid slots.
NI USB-6366
3
USB 2.0 Hi-Speed or full-speed
USB compatibility
USB Signal Stream
8, can be used for analog input, analog output, digital input, digital output,
counter/timer 0, counter/timer 1, counter/timer 2, counter/timer 3
Power Requirements
NI PXIe-6366
+3.3 V
4.75 W
12/18
www.ni.com
15.6 W
+12 V
NI PXIe-6368
+3.3 V
8.2 W
21.8 W
+12 V
Caution NI USB-6366 devices must be powered with NI offered AC adapter or a National Electric Code (NEC) Class 2 DC source that meets the power requirements
for the device and has appropriate safety certification marks for country of use.
NI USB-6366
11 to 30 VDC, 30 W, 2 positions 3.5mm pitch pluggable screw terminal with
screw locks similar to Phoenix Contact MC 1,5/2-STF-3,5 BK
Power supply requirements
Power input mating connector
Phoenix Contact MC 1,5/2-GF-3,5 BK or equivalent
Current Limits
Caution Exceeding the current limits may cause unpredictable behavior by the device and/or chassis.
NI PXIe-6366
4
1 A max
+5 V terminal (connector 0)
NI PXIe-6368
4
1 A max
+5 V terminal (connector 0)
+5 V terminal (connector 1)
P0/PFI/P1/P2 and +5 V terminals combined
NI USB-6366
4
1 A max
1.7 A max
4
1 A max
+5 V terminal
Physical Requirements
Printed circuit board dimensions
NI PXIe-6366/6368
Enclosure dimensions (includes connectors)
NI USB-6366
Standard 3U PXI
26.4 × 17.3 × 3.6 cm (10.4 × 6.8 × 1.4 in.)
175.3 x 162.6 mm (6.9 x 6.4 in.)
Enclosure dimensions (without connectors)
NI USB-6366 OEM
Weight
168 g (5.9 oz)
241 g (8.5 oz)
1.42 kg (3 lb 2 oz)
172 g (6.0 oz)
NI PXIe-6366
NI PXIe-6368
NI USB-6366
NI USB-6366 OEM
I/O connector
1 68-pin VHDCI
2 68-pin VHDCI
64 screw terminals
NI PXIe-6366
NI PXIe-6368
NI USB-6366
NI PXIe-6366/6368 mating connectors:
68-Pos Right Angle Single Stack PCB-Mount VHDCI (Receptacle), MOLEX 71430-0011
68-Pos Right Angle Dual Stack PCB-Mount VHDCI (Receptacle), MOLEX 74337-0016
68-Pos Offset IDC Cable Connector (Plug) (SHC68-*), MOLEX 71425-3001
16–24 AWG
NI USB-6366 screw terminal wiring
13/18
www.ni.com
5
Maximum Working Voltage
11 V, Measurement Category I
Channel-to-earth
Caution Do not use for measurements within Categories II, III, or IV.
Environmental
Operating temperature
NI PXIe-6366/6368
NI USB-6366
0 to 55 °C
0 to 45 °C
–40 to 70 °C
Storage temperature
Humidity
10 to 90% RH, noncondensing
2,000 m
2
Maximum altitude
Pollution Degree (indoor use only)
Shock and Vibration (NI PXIe-6366/6368 Only)
Operational shock
30 g peak, half-sine, 11 ms pulse (Tested in accordance with
IEC-60068-2-27. Test profile developed in accordance with
MIL-PRF-28800F.)
Random vibration
Operating
5 to 500 Hz, 0.3 g
rms
5 to 500 Hz, 2.4 g
(Tested in accordance with IEC-60068-2-64.
rms
Nonoperating
Nonoperating test profile exceeds the requirements of MIL-PRF-28800F,
Class 3.)
Safety Standards
This product is designed to meet the requirements of the following standards of safety for electrical equipment for measurement, control, and laboratory use:
IEC 61010-1, EN 61010-1
UL 61010-1, CSA 61010-1
Note For UL and other safety certifications, refer to the product label or the Online Product Certification section.
Electromagnetic Compatibility
This product meets the requirements of the following EMC standards for electrical equipment for measurement, control, and laboratory use:
EN 61326-1 (IEC 61326-1): Class A emissions; Basic immunity
EN 55011 (CISPR 11): Group 1, Class A emissions
AS/NZS CISPR 11: Group 1, Class A emissions
FCC 47 CFR Part 15B: Class A emissions
ICES-001: Class A emissions
Note For EMC declarations and certifications, refer to the Online Product Certification section.
Caution When operating this product, use shielded cables and accessories.
CE Compliance
This product meets the essential requirements of applicable European Directives, as amended for CE marking, as follows:
2006/95/EC; Low-Voltage Directive (safety)
2004/108/EC; Electromagnetic Compatibility Directive (EMC)
Online Product Certification
To obtain product certifications and the DoC for this product, visit ni.com/certification, search by model number or product line, and click the appropriate link in the Certification
column.
Environmental Management
NI is committed to designing and manufacturing products in an environmentally responsible manner. NI recognizes that eliminating certain hazardous substances from our
products is beneficial not only to the environment but also to NI customers.
For additional environmental information, refer to the NI and the Environment Web page at ni.com/environment. This page contains the environmental regulations and directives
with which NI complies, as well as other environmental information not included in this document.
14/18
www.ni.com
Waste Electrical and Electronic Equipment (WEEE)
EU Customers At the end of the product life cycle, all products must be sent to a WEEE recycling center. For more information about WEEE recycling centers, National
Instruments WEEE initiatives, and compliance with WEEE Directive 2002/96/EC on Waste Electrical and Electronic Equipment, visit ni.com/environment/weee.htm.
1
2
3
4
5
Typical behavior. Time period may be longer due to host system USB performance. Time period will be longer during firmware updates.
Stresses beyond those listed under Input voltage protection may cause permanent damage to the device.
Operating on a full-speed bus will result in lower performance and you might not be able to achieve maximum sampling/update rates.
Has a self-resetting fuse that opens when current exceeds this specification.
Maximum working voltage refers to the signal voltage plus the common-mode voltage.
Back to Top
15/18
www.ni.com
Pinouts/Front Panel Connections
NI PXIe-6366 Pinout
16/18
www.ni.com
NI USB-6366 Pinout
17/18
www.ni.com
NI PXIe-6368 Pinout
Back to Top
©2012 National Instruments. All rights reserved. CompactRIO, CVI, FieldPoint, LabVIEW, Measurement Studio, National Instruments, NI, ni.com, RTSI, SCXI, and SignalExpress are trademarks of National
Instruments. The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Other product and
company names listed are trademarks or trade names of their respective companies. A National Instruments Alliance Partner is a business entity independent from National Instruments and has no agency,
partnership, or joint-venture relationship with National Instruments.
My Profile | RSS | Privacy | Legal | Contact NI © 2012 National Instruments Corporation. All rights reserved.
18/18
www.ni.com
相关型号：
©2020 ICPDF网 联系我们和版权申明