MSA0515MD-3W [MORNSUN]

DUAL/SINGLE OUTPUT DIP DC-DC CONVERTER; 双路/单路输出DIP封装DC- DC转换器
MSA0515MD-3W
型号: MSA0515MD-3W
厂家: MORNSUN SCIENCE& TECHNOLOGY LTD.    MORNSUN SCIENCE& TECHNOLOGY LTD.
描述:

DUAL/SINGLE OUTPUT DIP DC-DC CONVERTER
双路/单路输出DIP封装DC- DC转换器

转换器 输出元件 DC-DC转换器
文件: 总3页 (文件大小:101K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
MSA_(M)D-3W & MSB_(M)D-3W Series  
3W, WIDE INPUT, ISOLATED & REGULATED  
DUAL/SINGLE OUTPUT DIP DC-DC CONVERTER  
multi-country patent protection  
FEATURES  
PRODUCT PROGRAM  
Input  
Output  
Wide (2:1) input range  
Efficiency up to 82%  
Part  
Number  
Efficiency  
(%, Typ)  
Certificate  
Voltage (VDC)  
Current (mA)  
Voltage  
(VDC)  
Operating temperature: -40°C ~ +85°C  
1500VDC isolation  
Short circuit protection(Automatic recovery)  
Internal SMD construction  
No heat sink required  
No external component required  
UL94-V0 package  
Industry standard pinout  
MTBF>1,000,000 hours  
RoHS Compliance  
Nominal Range Max*  
Max.  
±300  
±125  
±100  
600  
Min.  
±30  
±12  
±10  
60  
MSA0505(M)D-3W  
MSA0512(M)D-3W  
MSA0515(M)D-3W  
MSB0505(M)D-3W  
MSB0509(M)D-3W  
MSB0512(M)D-3W  
MSB0515(M)D-3W  
MSA1205(M)D-3W  
MSA1212(M)D-3W  
MSA1215(M)D-3W  
MSB1205(M)D-3W  
MSB1209(M)D-3W  
MSB1212(M)D-3W  
MSB1215(M)D-3W  
MSB1224(M)D-3W  
MSA2405(M)D-3W  
MSA2412(M)D-3W  
MSA2415(M)D-3W  
MSB2403(M)D-3W  
MSB2405(M)D-3W  
MSB2409(M)D-3W  
MSB2412(M)D-3W  
MSB2415(M)D-3W  
MSB2424(M)D-3W  
MSA4805(M)D-3W  
MSA4812(M)D-3W  
MSA4815(M)D-3W  
MSB4803(M)D-3W  
MSB4805(M)D-3W  
MSB4809(M)D-3W  
MSB4812(M)D-3W  
MSB4815(M)D-3W  
MSB4824(M)D-3W  
±5  
±12  
±15  
5
68  
72  
73  
68  
70  
72  
73  
76  
79  
80  
76  
78  
80  
81  
82  
76  
80  
81  
74  
76  
78  
81  
80  
82  
76  
80  
81  
74  
76  
78  
81  
80  
82  
5
4.5-9  
11  
9
333  
33  
12  
15  
±5  
±12  
±15  
5
250  
25  
200  
20  
±300  
±125  
±100  
600  
±30  
±12  
±10  
60  
12  
9-18  
22  
9
333  
33  
APPLICATIONS  
12  
15  
24  
±5  
±12  
±15  
3.3  
5
250  
25  
The MSA_(M)D-3W &MSB_(M)D-3W Series  
are specially designed for applications where a  
wide range input voltage power supplies are  
200  
20  
125  
12  
±300  
±125  
±100  
909  
±30  
±12  
±10  
90  
isolated from the input power supply in  
a
distributed power supply system on a circuit  
board. These products apply to:  
UL  
UL  
UL  
UL  
UL  
1) Where the voltage of the input power supply is  
wide range (Voltage range2:1);  
24  
18-36  
40  
600  
60  
9
333  
33  
2) Where isolation is necessary between input  
and output(Isolation voltage1500VDC);  
3) Where the regulation of the output voltage and  
the output ripple noise are demanded.  
12  
15  
24  
±5  
±12  
±15  
3.3  
5
250  
25  
200  
20  
125  
12  
±300  
±125  
±100  
909  
±30  
±12  
±10  
90  
MODEL SELECTION  
MSA2405MD-3W  
48  
36-72  
80  
600  
60  
Rated Power  
Package Style  
Output Voltage  
9
333  
33  
12  
15  
24  
250  
25  
Input Voltage  
200  
20  
Product Series  
125  
12  
* Input voltage over it may cause permanent damage to the device.  
Note: Metal package styles series is MSA_MD-3W & MSB_MD-3W.  
MORNSUN Science & Technology co.,Ltd.  
Address: 2th floor 6th building, Hangzhou  
Industrial District, Guangzhou, China  
Tel: 86-20-38601850  
Fax: 86-20-38601272  
http://www.mornsun-power.com  
ISOLATION SPECIFICATIONS  
Item  
Test conditions  
Min.  
Typ.  
Max.  
Units  
VDC  
MΩ  
Isolation voltage  
Isolation resistance  
Tested for 1 minute and 1mA max  
Test at 500VDC  
1500  
1000  
Isolation capacitance Input/Output  
80  
pF  
The copyright and authority for the interpretation of the products are reserved by Mornsun  
Specifications subject to change without notice.  
A/2-2009 Page 1 of 3  
MSA_((M)D-3W&MSB_(M)D-3W  
OUTPUT SPECIFICATIONS  
TYPICAL CHARACTERISTICS  
Item  
Test conditions  
Min.  
0.3  
Typ.  
Max. Units  
Output power  
See below products program  
3
W
Positive voltage accuracy Refer to recommended circuit  
Negative voltage accuracy Refer to recommended circuit  
±1  
±3  
±3  
±5  
%
Load regulation  
From 10% to 100% load  
±0.5  
±0.2  
±1*  
±0.5  
Line regulation  
Input voltage from low to high  
Refer to recommended circuit  
20MHz Bandwidth  
Temperature drift(Vout)  
Ripple & Noise**  
Switching frequency  
±0.03 %/°C  
100 mVp-p  
KHz  
50  
100% load, nominal input voltage  
300  
100  
*Dual output models unbalanced load: ±5%.  
**Test ripple and noise by parallel cablemethod. See detailed operation instructions at Testing of Power  
Converter section, application notes.  
Operating Temp.(  
C )  
RECOMMENDED CIRCUIT  
COMMON SPECIFICATIONS  
Item  
Test Conditions  
Min.  
Typ. Max. Units  
Storage humidity  
Operating temperature  
Storage temperature  
Temp. rise at full load  
Lead temperature  
No-load Power consumption  
Cooling  
95  
85  
%
°C  
W
+Vout  
0V  
Vin  
-40  
-55  
Cin  
DC DC  
125  
GND  
-Vout  
15  
Single Output  
Vin  
1.5mm from case for 10 seconds  
300  
+Vout  
0V  
0.2  
Cin  
DC DC  
Free air convection  
Continuous, Automatic Recovery  
GND  
Short circuit protection  
Case material  
(Figure 1)  
D: Plastic (UL94-V0); MD: Steel, Nickel Coated  
MTBF  
1000  
15  
K hours  
g
Weight  
Ip  
APPLICATION NOTE  
Requirement On Output Load  
Input Voltage  
Range  
In order to ensure the product operate efficiently and reliably, in addition to a max load  
(namely full load), a minimum load is specified for this kind of DC/DC converter. Make sure the  
specified range of input voltage is not exceeded, the minimum output load no less than 10%  
load. If the actual load is less than the specified minimum load, the output ripple may increase  
sharply while its efficiency and reliability will reduce greatly. If the actual output power is very  
small, please add an appropriate resistor as extra loading, or contact our company for other  
lower output power products.  
Input Voltage (V)  
Output External Capacitor Table(Table 1)  
Single Vout  
(VDC)  
Cout  
(uF)  
1000  
680  
470  
330  
220  
Dual Vout  
(VDC)  
±5  
Cout  
(uF)  
680  
470  
330  
220  
100  
Recommended Circuit  
5
9
12  
15  
24  
All the MSA_(M)D-3W & MSB_(M)D-3W Series have been tested according to the following  
recommended testing circuit before leaving factory. This series should be tested under load.  
Never be tested under no load (see Figure 1).  
±9  
±12  
±15  
±24  
If you want to further decrease the input/output ripple, you can increase capacitance properly  
or choose capacitors with low ESR. However, the capacitance of the output filter capacitor must  
be proper. If the capacitance is too big, a startup problem might arise. For every channel of  
output, provided the safe and reliable operation is ensured, the greatest capacitance of its filter  
capacitor sees (Table 1). Generally: If you want to use the products in high EMI, please choose  
our metal packaged products (MSA_MD-3W & MSB_MD- 3W). General:  
Cin: 5V&12V  
24V&48V 10μF-47μF  
Cout: 10μF/100mA  
100μF  
Input Current  
When it is used in unregulated power supply, be sure that the fluctuating range of the power  
supply and the rippled voltage do not exceed the module standard. Input current of power  
supply should afford the startup current of this kind of DC/DC module (See figure 2), General:  
Ip 1.4*Iin-max  
No parallel connection or plug and play  
The copyright and authority for the interpretation of the products are reserved by Mornsun  
Specifications subject to change without notice.  
MSA_((M)D-3W&MSB_(M)D-3W A/2-2009 Page 2 of 3  
OUTLINE DIMENSIONS & PIN CONNECTIONS  
MECHANICAL DIMENSIONS  
RECOMMENDED FOOTPRINT  
1.00 [0.039]  
DUAL OUTPUT  
MS_MD  
31.50[1.240]  
MS_D  
24 23 22  
15 14 13  
10 11 12  
31.80[1.252]  
1
2
3
10 11 12  
15 14 13  
1
2
3
(Bottom View)  
2.54 [0.100]  
27.94 [1.100]  
24 23 22  
SINGLE OUTPUT  
2.54 [0.100]  
24  
1
15 14 13  
10 11 12  
27.94 [1.100]  
(Side View)  
0.50 [0.020]  
TUBE OUTLINE DIMENSIONS  
22.70 [0.894]  
Note:  
Unit:mm[inch]  
Pin diameter tolerances:±0.10mm[±0.004inch]  
General tolerances:±0.25mm[±0.010inch]  
FOOTPRINT DETAILS  
Single  
Vin  
Dual  
Vin  
Pin  
1,24  
2,23  
3,22  
No Pin  
No Pin  
0V  
-Vo  
0V  
0.60 [0.024]  
11.30 [0.445]  
Note:  
Unit :mm[inch]  
General tolerances: ±0.50mm[±0.020inch]  
10,15  
11,14  
12,13  
0V  
+Vo  
+Vo  
GND  
GND  
L=530mm[20.866inch] Tube Quantity: 15pcs  
L=220mm[8.661inch] Tube Quantity: 6pcs  
NC:No connection  
Note:  
1. The load shouldn't be less than 10%, otherwise ripple will increase dramatically.  
2. Operation under 10% load will not damage the converter; However, they may not meet all specification listed.  
3. All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified.  
4. In this datasheet, all the test methods of indications are based on corporate standards.  
5. Only typical models listed, other models may be different, please contact our technical person for more details.  
The copyright and authority for the interpretation of the products are reserved by Mornsun  
Specifications subject to change without notice.  
A/2-2009 Page 3 of 3  
MSA_((M)D-3W&MSB_(M)D-3W  

相关型号:

MSA0635

Cascadable Silicon Bipolar MMIC? Amplifiers
ETC

MSA0685

Cascadable Silicon Bipolar MMIC? Amplifier
AGILENT

MSA0686

Cascadable Silicon Bipolar MMIC Amplifier
AGILENT

MSA0886

Cascadable Silicon Bipolar MMIC Amplifier
AGILENT

MSA0900

Analog Circuit
AGILENT

MSA1

Surge Absorber(Spark Gap)
MERITEK

MSA1-M

Surge Absorber (Spark Gap)
MERITEK

MSA1-MS

Surge Absorber (Spark Gap)
MERITEK

MSA100G41

暂无描述
TOSHIBA

MSA100G43

Silicon Controlled Rectifier, 79 A, 400 V, SCR
TOSHIBA

MSA100L41

Silicon Controlled Rectifier, 79 A, 800 V, SCR
TOSHIBA

MSA100L43

Silicon Controlled Rectifier, 79 A, 800 V, SCR
TOSHIBA