MW6HP [TE]
Microwave Switching, Hermetically Sealed, DPDT; 微波开关,密封DPDT型号: | MW6HP |
厂家: | TE CONNECTIVITY |
描述: | Microwave Switching, Hermetically Sealed, DPDT |
文件: | 总8页 (文件大小:299K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MW3/MW4/MW6/MW3HP/MW4HP/MW6HP Series Relays
Microwave Switching, Hermetically Sealed, DPDT
Product Facts
ꢀ Excellent signal isolation,
stable insertion loss and
low VSWR.
ꢀ Provide repeatable RF
performance at frequencies
up to the 3 GHz. level
(MW3/MW3HP),
4 GHz. level (MW4/MW4HP)
& 6 GHz. level
(MW6/MW6HP).
ꢀ Standard versions for
applications ranging from
wireless communications to
precision high-speed test
equipment.
ꢀ High performance (HP)
versions for use under more
demanding environmental
conditions.
ꢀ Standard or sensitive (S)
coils are offered in a range
of DC input voltages.
ꢀ 2 Form C (DPDT) contacts
rated low-level to 1 amp.
ꢀ Extended mechanical life
expectancy of 10 million
opertions.
ꢀ Robust, hermetically sealed
enclosure.
These CII relays provide
microwave frequency
switching in a hermetically
sealed, subminiature
package.
High performance models
(MW3HP, MW4HP and
MW6HP) offer extended
temperature ratings of
-65°C to +125°C while
providing 30G’s vibration
and 100G’s shock (75G’s
for MW3) environmental
ratings.
Signal isolation is 18dB at 6
GHz. (MW6/MW6HP), 18dB
at 4 GHz. (MW4/MW4HP),
and 22dB at 3 GHz.
(MW3/MW3HP).
Both standard and high
performance models are
offered in 3 GHz., 4 GHz.
and 6 GHz. types.
Insertion loss is 0.38dB for
MW6/MW6HP, 0.27dB for
MW4/MW4HP, and 0.36dB
for MW3/MW3HP.
All are available with either
standard or sensitive DC
coils. Nominal coil power is
367-500mW (model
dependent) for standard
coils and 169-250mW for
sensitive coils.
Standard models (MW3,
MW4 and MW6) perform in
temperature ranges from
-55°C to +85°C and
withstand 10G vibration and
30G shock.
VSWR is a low 1.30:1 @
6GHz. for MW6/MW6HP,
1.36:1 @ 4GHz. for
MW4/MW4HP, and 1.24:1
@ 3GHz. for MW3/MW3HP.
© 2003 by Tyco Electronics Corporation. All Rights Reserved.
CII and TYCO are trademarks.
1
Catalog 1654542
Issued 12-03
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
www.tycoelectronics.com
UK: 44-141-810-8967
MW3/MW4/MW6/MW3HP/MW4HP/MW6HP Series Relays
Microwave Switching, Hermetically Sealed, DPDT (Continued)
MW3 & MW3HP Models
3 GHz. Switching
Electrical Characteristics
Contact Arrangement:
2 Form C (DPDT)
Contact Ratings
Contact Load
Type
Operations (min.)
100,000
1.0A @ 28VDC
Resistive
Inductive
Low Level
Contact Resistance:
200mA @ 28VDC (300mH)*
30µA @ 50mVDC
100,000
Before life: 100 milliohms, max
(measured @ 10mA @ 6VDC.)
After life: 200 milliohms, max
(measured @ 1A @ 28VDC.)
10,000,000
* The inductive rating is only applicable to high performance models (MW3HP and MW3HPS).
Mechanical Life Expectancy:
10 million operations
Coil Voltages:
5, 12, 18 & 26.5VDC (MW3)
5, 6, 9, 12, 18 & 26.5VDC (MW3HP)
Coil Data
MW3 Models
Coil Power (mw max @25°C):
MW3 MW3S MW3HP MW3HPS
Nominal
Coil Voltage
(VDC)
Coil Resistance
In Ohms
20% @ 25°C
Pickup Voltage
VDC (Max.)
@ 25°C
Nominal
Coil Power
(mw) @ 25°C
Maximum
Coil
Voltage
Coil
Designator
675
565
673
563
Duty Cycle:
Continuous
Standard Coil
5.0
12.0
50
390
3.6
8.4
500
369
368
450
5.8
5
Pick-up Voltage:
MW3: Approx 70% of nominal.
16.0
24.0
32.0
12
18
26
MW3HP: Approx 50% of nominal.
18.0
880
13.0
17.0
Pick-up Sensitivity (mw max @25°C):
MW3 MW3S MW3HP MW3HPS
26.5
1,560
Sensitive Coil
5.0
180
90
146
68
100
850
3.5
9.0
250
169
203
213
7.5
5
12.0
20.0
30.0
40.0
12
18
26
18.0
1,600
3,300
13.5
18.0
Operating Characteristics
Timing:
26.5
Operate Time (ms max.)
MW3HP (High Performance) Models
MW3 MW3S MW3HP MW3HPS
4.0 6.0 2.0 4.0
Release Time (ms max.)
MW3 MW3S MW3HP MW3HPS
3.0 3.0 1.5 2.0
Bounce Time (ms max.)
MW3 MW3S MW3HP MW3HPS
1.5 1.5
Nominal
Coil Voltage
(VDC)
Coil Res.
in Ohms
10% @ 25°C
Pickup V
VDC (Max.) VDC (Max.)
@25°C
Release V
Release V
VDC (Min.)
@25°C
Nominal
Coil Power
(mw) @25°C
Maximum
Coil
Voltage
Coil
Designator
@25°C
Standard Coil
5.0
6.0
50
98
2.7
3.5
1.4
2.0
3.0
4.0
6.0
8.0
0.22
0.28
0.54
0.63
0.91
1.37
500
367
368
369
368
450
5.8
8.0
5
6
–
–
9.0
220
390
880
1,560
5.3
12.0
16.0
24.0
32.0
9
Dielectric Withstanding Voltage:
Between Open Contacts,
Between Adjacent Contacts and
Between Contacts and Coil:
MW3 types: 350Vrms, 60 Hz.
MW3HP types: 500Vrms, 60 Hz.
12.0
7.0
12
18
26
18.0
10.5
14.2
26.5
Sensitive Coil
5.0
100
200
2.6
3.4
1.4
2.0
3.0
4.0
6.0
8.0
0.23
0.28
0.55
0.64
0.92
1.4
250
180
203
169
203
213
7.5
5
6
Insulation Resistance:
1,000 megohms @ 500VDC.
6.0
10.0
15.0
20.0
30.0
40.0
9.0
400
4.85
7.0
9
Environmental Characteristics
Temperature Range:
MW3 types: -55°C to +85°C.
MW3HP types: -65°C to +125°C.
12.0
850
12
18
26
18.0
1,600
3,300
9.8
26.5
14.0
Weight:
MW3, MW3HP: 0.09 oz. (2.55 g)
MW3S, MW3HPS: 0.12 oz. (3.40 g).
Vibration Resistance:
MW3 types:10 G’s, 10-500 Hz.
MW3HP types: 30 G’s, 10-3,000 Hz
Shock Resistance:
MW3 types:30 G’s, 6 1 ms.
MW3HP types: 75 G’s, 6 1 ms.
2
Catalog 1654542
Issued 12-03
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
www.tycoelectronics.com
UK: 44-141-810-8967
MW3/MW4/MW6/MW3HP/MW4HP/MW6HP Series Relays
Microwave Switching, Hermetically Sealed, DPDT (Continued)
MW3 & MW3HP Models
3 GHz. Switching
Insertion Loss & VSWR: NC Contacts
Isolation
Insertion Loss & VSWR: NO Contacts
(dB)
(dB)
(dB)
VSWR
VSWR
2.0
2.0
0.0
0.0
0
-10
-20
-30
-40
-50
1.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
INSERTION LOSS
INSERTION LOSS
ISOLATION
VSWR
1.5
VSWR
1.5
1.0
3.0
1.0
3.0
1.0
0
1.0
0
0.5
1.0
2.0
2.5
0.5
1.0
2.0
2.5
0
0.5
1.0
1.5
2.0
2.5
3.0
FREQUENCY (GHz)
FREQUENCY (GHz)
FREQUENCY (GHz)
Test Conditions
Test Board: 0.031” double sided copper clad, PTFE based laminate.
Connections: Relay header is soldered to ground place. Relay terminals are soldered to through holes. SMA connectors are soldered to circuit traces.
Temperature: Room ambient.
Signal Strength: 0 dBm.
Notes: 1. Unused terminals were terminated with 50 ohm impedance load. 2. All readings are typical.
Header
Enclosures
.370 (9.40) DIA MAX
.031 .003
(0.79)
.370 (9.40) DIA MAX
.031 .003
(0.79)
.335 (8.51) DIA MAX
.035 .010
(0.89)
.035 .010
(0.89)
.335 (8.51) DIA MAX
GROUND PIN
(OPTIONAL)
.385 (9.78)
MAX
.275 (6.99)
MAX
.200 DIA
(5.08)
GROUND PIN
(OPTIONAL)
.200 DIA
(5.08)
+
+
36° 3°
36° 3°
TERMINAL
A = .750 MIN (19.05)
P = .187 .010 (4.75 .25)
Ground Pin
Position “G”
Ground Pin
Position “E”
+.002
-.001
+.002
-.001
.017
(0.43) DIA
.017
(0.43) DIA
For other ground pin configurations consult factory.
.370 (9.40) DIA MAX
.370 (9.40) DIA MAX
Header and Terminal Finish:
Nickel plated on MW3 & MW3S.
Tin-lead plated on MW3HP & MW3HPS.
MW3S / MW3HPS
MW3 / MW3HP
Part Numbering System
Typical Part Number
Wiring Diagram
MW3
S
– 5
A
G
Series:
MW3 = 3 GHz. switching relay
MW3HP = High performance 3 GHz. switching relay
Coil Sensitivity:
Leave Blank = Standard Coil
S = Sensitive Coil
Coil Designator:
5 = 5VDC
6 = 6VDC†
18 = 18VDC
9 = 9VDC†
12 = 12VDC
26 = 26.5VDC
Terminal View
† 6 and 9 volt coil only available on high performance models.
Terminal Length:
A = 0.750 in (19.05 mm)
P = 0.187 0.010 in (4.75 0.25 mm)
Ground Pin Position (see header drawings above):
G = Opposite locating tab E = Near locating tab.
Consult factory for other ground pin configurations.
3
Catalog 1654542
Issued 12-03
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
www.tycoelectronics.com
UK: 44-141-810-8967
MW3/MW4/MW6/MW3HP/MW4HP/MW6HP Series Relays
Microwave Switching, Hermetically Sealed, DPDT (Continued)
MW4 & MW4HP Models
4 GHz. Switching
Electrical Characteristics
Contact Arrangement:
2 Form C (DPDT)
Contact Ratings
Contact Load
Type
Operations (min.)
100,000
1.0A @ 28VDC
Resistive
Inductive
Low Level
Contact Resistance:
200mA @ 28VDC (300mH)*
30µA @ 50mVDC
100,000
Before life: 100 milliohms, max
(measured @ 10mA @ 6VDC.)
After life: 200 milliohms, max
(measured @ 1A @ 28VDC.)
10,000,000
* The inductive rating is only applicable to high performance models (MW4HP and MW4HPS).
Mechanical Life Expectancy:
10 million operations
Coil Voltages:
5, 12, 18 & 26.5VDC (MW4)
5, 6, 9, 12, 18 & 26.5VDC (MW4HP)
Coil Data
MW4 Models
Coil Power (mw max @25°C):
MW4 MW4S MW4HP MW4HPS
Nominal
Coil Voltage
(VDC)
Coil Resistance
In Ohms
20% @ 25°C
Pickup Voltage
VDC (Max.)
@ 25°C
Nominal
Coil Power
(mw) @ 25°C
Maximum
Coil
Voltage
Coil
Designator
675
565
673
563
Duty Cycle:
Continuous
Standard Coil
5.0
12.0
50
390
3.6
8.4
500
369
368
450
5.8
5
Pick-up Voltage:
MW4: Approx 70% of nominal.
16.0
24.0
32.0
12
18
26
MW4HP: Approx 50% of nominal.
18.0
880
13.0
17.0
Pick-up Sensitivity (mw max @25°C):
MW4 MW4S MW4HP MW4HPS
26.5
1,560
Sensitive Coil
5.0
180
90
123
68
100
850
3.5
9.0
250
169
203
213
7.5
5
12.0
20.0
30.0
40.0
12
18
26
18.0
1,600
3,300
13.5
18.0
Operating Characteristics
Timing:
26.5
Operate Time (ms max.)
MW4HP (High Performance) Models
MW4 MW4S MW4HP MW4HPS
4.0 6.0 2.0 4.0
Release Time (ms max.)
MW4 MW4S MW4HP MW4HPS
3.0 3.0 1.5 2.0
Bounce Time (ms max.)
MW4 MW4S MW4HP MW4HPS
1.5 1.5
Nominal
Coil Voltage
(VDC)
Coil Res.
in Ohms
10% @ 25°C
Pickup V
VDC (Max.) VDC (Max.)
@25°C
Release V
Release V
VDC (Min.)
@25°C
Nominal
Coil Power
(mw) @25°C
Maximum
Coil
Voltage
Coil
Designator
@25°C
Standard Coil
5.0
6.0
50
98
2.7
3.5
1.4
2.0
3.0
4.0
6.0
8.0
0.22
0.28
0.54
0.63
0.91
1.37
500
367
368
369
368
450
5.8
8.0
5
6
–
–
9.0
220
390
880
1,560
5.3
12.0
16.0
24.0
32.0
9
Dielectric Withstanding Voltage:
Between Open Contacts,
Between Adjacent Contacts and
Between Contacts and Coil:
MW4 types: 350Vrms, 60 Hz.
MW4HP types: 500Vrms, 60 Hz.
12.0
7.0
12
18
26
18.0
10.5
14.2
26.5
Sensitive Coil
5.0
100
200
2.6
3.4
1.4
2.0
3.0
4.0
6.0
8.0
0.23
0.28
0.55
0.64
0.92
1.4
250
180
203
169
203
213
7.5
5
6
Insulation Resistance:
1,000 megohms @ 500VDC.
6.0
10.0
15.0
20.0
30.0
40.0
9.0
400
4.85
7.0
9
Environmental Characteristics
Temperature Range:
MW4 types: -55°C to +85°C.
MW4HP types: -65°C to +125°C.
12.0
850
12
18
26
18.0
1,600
3,300
9.8
26.5
14.0
Weight:
MW4, MW4HP: 0.09 oz. (2.55 g)
MW4S, MW4HPS: 0.12 oz. (3.40 g).
Vibration Resistance:
MW4 types:10 G’s, 10-500 Hz.
MW4HP types: 30 G’s, 10-3,000 Hz
Shock Resistance:
MW4 types:30 G’s, 6 1 ms.
MW4HP types: 100 G’s, 6 1 ms.
4
Catalog 1654542
Issued 12-03
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
www.tycoelectronics.com
UK: 44-141-810-8967
MW3/MW4/MW6/MW3HP/MW4HP/MW6HP Series Relays
Microwave Switching, Hermetically Sealed, DPDT (Continued)
MW4 & MW4HP Models
4 GHz. Switching
Insertion Loss & VSWR: NC Contacts
Isolation
Insertion Loss & VSWR: NO Contacts
(dB)
(dB)
(dB)
VSWR
VSWR
2.0
2.0
1.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1.0
0.0
0.05
0.0
0
1.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.50
-10
-20
-30
-40
-50
INSERTION LOSS
INSERTION LOSS
ISOLATION
VSWR
VSWR
1.0
4.0
0.50
0
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
FREQUENCY (GHz)
FREQUENCY (GHz)
FREQUENCY (GHz)
Test Conditions
Test Board: 0.031” double sided copper clad, PTFE based laminate.
Connections: Relay header is soldered to ground place. Relay terminals are soldered to through holes. SMA connectors are soldered to circuit traces.
Temperature: Room ambient.
Signal Strength: 0 dBm.
Notes: 1. Unused terminals were terminated with 50 ohm impedance load. 2. All readings are typical.
Header
Enclosures
.335 (8.51) SQ MAX
.375 (9.53) SQ MAX
.031 .003 (0.79)
.035 .010
(0.98)
.335 (8.51) SQ MAX
.385 (9.78)
MAX
.280 (7.11)
MAX
.200 DIA
(5.08)
+
36° 3°
TERMINAL
P = .187 .010 (4.75 .25)
A = .750 MIN (19.05)
B = 1.50 MIN (38.10)
Header and Terminal Finish:
Gold plated
.017 +-..000021 (0.43) DIA
.370 (9.40) SQ MAX
.017 +-..000021 (0.43) DIA
.370 (9.40) SQ MAX
MW4S / MW4HPS
MW4 / MW4HP
Part Numbering System
Typical Part Number
Wiring Diagram
MW4
S – 5 P
Series:
MW4 = 4 GHz. switching relay
MW4HP = High performance 4 GHz. switching relay
Coil Sensitivity:
Leave Blank = Standard Coil
S = Sensitive Coil
Coil Designator:
5 = 5VDC
6 = 6VDC†
18 = 18VDC
9 = 9VDC†
12 = 12VDC
26 = 26.5VDC
Terminal View
† 6 and 9 volt coil only available on high performance models.
Terminal Length:
A = 0.750 in (19.05 mm)
B = 1.50 in (38.105 mm) – only available on high performance models
P = 0.187 0.010 in (4.75 0.25 mm)
5
Catalog 1654542
Issued 12-03
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
www.tycoelectronics.com
UK: 44-141-810-8967
MW3/MW4/MW6/MW3HP/MW4HP/MW6HP Series Relays
Microwave Switching, Hermetically Sealed, DPDT (Continued)
MW6 & MW6HP Models
6 GHz. Switching
Electrical Characteristics
Contact Arrangement:
2 Form C (DPDT)
Contact Ratings
Contact Load
Type
Operations (min.)
100,000
1.0A @ 28VDC
Resistive
Inductive
Low Level
Contact Resistance:
200mA @ 28VDC (300mH)*
30µA @ 50mVDC
100,000
Before life: 100 milliohms, max
(measured @ 10mA @ 6VDC.)
After life: 200 milliohms, max
(measured @ 1A @ 28VDC.)
10,000,000
* The inductive rating is only applicable to high performance models (MW6HP and MW6HPS).
Mechanical Life Expectancy:
10 million operations
Coil Voltages:
5, 12, 18 & 26.5VDC (MW6)
5, 6, 9, 12, 18 & 26.5VDC (MW6HP)
Coil Data
MW6 Models
Coil Power (mw max @25°C):
MW6 MW6S MW6HP MW6HPS
Nominal
Coil Voltage
(VDC)
Coil Resistance
In Ohms
20% @ 25°C
Pickup Voltage
VDC (Max.)
@ 25°C
Nominal
Coil Power
(mw) @ 25°C
Maximum
Coil
Voltage
Coil
Designator
675
565
673
563
Duty Cycle:
Continuous
Standard Coil
5.0
12.0
50
390
3.6
8.4
500
369
368
450
5.8
5
Pick-up Voltage:
MW6: Approx 70% of nominal.
16.0
24.0
32.0
12
18
26
MW6HP: Approx 50% of nominal.
18.0
880
13.0
17.0
Pick-up Sensitivity (mw max @25°C):
MW6 MW6S MW6HP MW6HPS
26.5
1,560
Sensitive Coil
5.0
180
90
123
68
100
850
3.5
9.0
250
169
203
213
7.5
5
12.0
20.0
30.0
40.0
12
18
26
18.0
1,600
3,300
13.5
18.0
Operating Characteristics
Timing:
26.5
Operate Time (ms max.)
MW6HP (High Performance) Models
MW6 MW6S MW6HP MW6HPS
4.0 6.0 2.0 4.0
Release Time (ms max.)
MW6 MW6S MW6HP MW6HPS
3.0 3.0 1.5 2.0
Bounce Time (ms max.)
MW6 MW6S MW6HP MW6HPS
1.5 1.5
Nominal
Coil Voltage
(VDC)
Coil Res.
in Ohms
10% @ 25°C
Pickup V
VDC (Max.) VDC (Max.)
@25°C
Release V
Release V
VDC (Min.)
@25°C
Nominal
Coil Power
(mw) @25°C
Maximum
Coil
Voltage
Coil
Designator
@25°C
Standard Coil
5.0
6.0
50
98
2.7
3.5
1.4
2.0
3.0
4.0
6.0
8.0
0.22
0.28
0.54
0.63
0.91
1.37
500
367
368
369
368
450
5.8
8.0
5
6
–
–
9.0
220
390
880
1,560
5.3
12.0
16.0
24.0
32.0
9
Dielectric Withstanding Voltage:
Between Open Contacts,
Between Adjacent Contacts and
Between Contacts and Coil:
MW6 types: 350Vrms, 60 Hz.
MW6HP types: 500Vrms, 60 Hz.
12.0
7.0
12
18
26
18.0
10.5
14.2
26.5
Sensitive Coil
5.0
100
200
2.6
3.4
1.4
2.0
3.0
4.0
6.0
8.0
0.23
0.28
0.55
0.64
0.92
1.4
250
180
203
169
203
213
7.5
5
6
Insulation Resistance:
1,000 megohms @ 500VDC.
6.0
10.0
15.0
20.0
30.0
40.0
9.0
400
4.85
7.0
9
Environmental Characteristics
Temperature Range:
MW6 types: -55°C to +85°C.
MW6HP types: -65°C to +125°C.
12.0
850
12
18
26
18.0
1,600
3,300
9.8
26.5
14.0
Weight:
MW6, MW6HP: 0.09 oz. (2.55 g)
MW6S, MW6HPS: 0.12 oz. (3.40 g).
Vibration Resistance:
MW6 types:10 G’s, 10-500 Hz.
MW6HP types: 30 G’s, 10-3,000 Hz
Shock Resistance:
MW6 types:30 G’s, 6 1 ms.
MW6HP types: 100 G’s, 6 1 ms.
6
Catalog 1654542
Issued 12-03
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
www.tycoelectronics.com
UK: 44-141-810-8967
MW3/MW4/MW6/MW3HP/MW4HP/MW6HP Series Relays
Microwave Switching, Hermetically Sealed, DPDT (Continued)
MW6 & MW6HP Models
6 GHz. Switching
Insertion Loss & VSWR: NC Contacts
Isolation
Insertion Loss & VSWR: NO Contacts
(dB)
(dB)
VSWR
VSWR
(dB)
2.0
2.0
0.0
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
0
1.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.9
1.8
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
INSERTION LOSS
-10
INSERTION LOSS
1.7
1.6
1.5
1.4
1.3
1.2
-20
-30
-40
-50
ISOLATION
VSWR
VSWR
1.1
1.0
1.1
1.0
1.0
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
FREQUENCY (GHz)
FREQUENCY (GHz)
FREQUENCY (GHz)
Test Conditions
Test Board: 0.031” double sided copper clad, PTFE based laminate.
Connections: Relay header is soldered to ground place. Relay terminals are soldered to through holes. SMA connectors are soldered to circuit traces.
Temperature: Room ambient.
Signal Strength: 0 dBm.
Notes: 1. Unused terminals were terminated with 50 ohm impedance load. 2. All readings are typical.
Header
Enclosures
.335 (8.51) SQ MAX
.375 (9.53) SQ MAX
.031 .003 (0.79)
.035 .010
(0.98)
.335 (8.51) SQ MAX
.385 (9.78)
MAX
.280 (7.11)
MAX
.200 DIA
(5.08)
+
36° 3°
TERMINAL
P = .187 .010 (4.75 .25)
A = .750 MIN (19.05)
B = 1.50 MIN (38.10)
Header and Terminal Finish:
Gold plated
.017 +-..000021 (0.43) DIA
.370 (9.40) SQ MAX
.017 +-..000021 (0.43) DIA
.370 (9.40) SQ MAX
MW6S / MW6HPS
MW6 / MW6HP
Part Numbering System
Typical Part Number
Wiring Diagram
MW6
S – 5 P
Series:
MW6 = 6 GHz. switching relay
MW6HP = High performance 6 GHz. switching relay
Coil Sensitivity:
Leave Blank = Standard Coil
S = Sensitive Coil
Coil Designator:
5 = 5VDC
6 = 6VDC†
18 = 18VDC
9 = 9VDC†
12 = 12VDC
26 = 26.5VDC
Terminal View
† 6 and 9 volt coil only available on high performance models.
Terminal Length:
A = 0.750 in (19.05 mm)
B = 1.50 in (38.105 mm) – only available on high performance models
P = 0.187 0.010 in (4.75 0.25 mm)
7
Catalog 1654542
Issued 12-03
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
www.tycoelectronics.com
UK: 44-141-810-8967
Global Contacts
Americas
Argentina – Buenos Aires
Canada – Markham
Mexico – Mexico City
For Latin/South American
Countries not shown
Phone:
Fax:
+54-11-4733-2200
+54-11-4733-2250
Phone:
Fax:
+905-475-6222
+905-474-5520
Phone:
Fax:
+52-55-5-729-0425
+52-55-5-398-1430
Phone:
Fax:
+57-1-240-9396
+57-1-660-0206
Product Information Center:
Brasil – São Paulo
United States – Harrisburg, PA
Phone:
Fax:
+55-11-3611-1311
+55-11-3611-0397
Phone:
Fax:
+717-564-0100
+717-986-7575
Product Information Center:
(Technical Support)
Colombia – Bogota
Phone:
Fax:
+57-1-240-9396
+57-1-660-0206
Phone:
Fax:
+800-522-6752
+717-986-7575
Asia/Pacific
Australia – Sydney
Japan – Kawasaki, Kanagawa
New Zealand – Auckland
Singapore – Singapore
Phone:
Fax:
+61-2-9840-8200
+61-2-9899-5649
Phone:
Fax:
+81-44-844-8079
+81-44-844-8733
Phone:
Fax:
+64-9-634-4580
+64-9-634-4586
Phone:
Fax:
Raychem Products
Phone:
Fax:
+65-4820-311
+65-4821-012
Product Information Center:
(Technical Support)
Phone:
Fax:
Product Information Center:
(Technical Support)
Phone:
Fax:
Philippines – Makati City
Phone:
Fax:
+65-4866-151
+65-6545-514
+61-2-9554-2600
+61-2-9502-2556
+81-44-844-8013
+81-44-812-3200
+632-867-8641
+632-867-8661
People’s Republic of China
Hong Kong
Phone:
Fax:
+852-2735-1628
+852-2735-0243
Indonesia – Jakarta
Phone:
Fax:
+82-2-3274-0535
+82-2-3274-0524/0531
Phone:
Fax:
+66-2-955-0500
+66-2-955-0505
Phone:
Fax:
+6221-526-7852
+6221-526-7856
Shanghai
Phone:
Fax:
+86-21-6485-0602
+86-21-6485-0728
Malaysia – Selangor
Vietnam – Ho Chi Minh City
Phone:
Fax:
+60-3-7053055
+60-3-7053066
Phone:
Fax:
+84-8-8232-546/7
+84-8-8221-443
Shunde
Phone:
Fax:
+86-765-775-1368
+86-765-775-2823
Europe/Middle East/Africa
Spain – Barcelona
Austria – Vienna
Germany – Bensheim
Italy – Collegno (Torino)
Phone:
Fax:
+34-93-291-0330
+34-93-201-7879
Phone:
Fax:
+43-190-560-0
+43-190-560-1333
Phone:
Fax:
+49-6251-133-0
+49-6251-133-1600
Phone:
Fax:
+39-011-4012-111
+39-011-4031-116
Product Information Center:
(Technical Support):
Product Information Center:
(Technical Support)
Lithuania – Vilnius
Belgium – Kessel-Lo
Phone:
Fax:
+370-5-21-31-402
+370-5-21-31-403
Phone:
Fax:
+34-93-291-0330
+34-93-200-3779
Phone:
Fax:
+49-6251-133-1999
+49-6251-133-1988
Phone:
Fax:
+32-16-352-300
+32-16-352-352
Netherlands – ’s-Hertogenbosch
Sweden – Upplands Väsby
Germany – Langen
Bulgaria – Sofia
Phone:
Fax:
+31-73-6246-246
+31-73-6212-365
Phone:
Fax:
+46-8-50-72-50-00
+46-8-50-72-50-01
Phone:
Fax:
+49-6103-709-0
+49-6103-709-1223
Phone:
Fax:
+359-2-971-2152
+359-2-971-2153
Product Information Center:
Czech Republic – Kurim
Phone:
Fax:
+420-5-41-162-111
+420-5-41-162-223
Norway – Nesbru
Phone:
Fax:
+47-66-77-88-99
+47-66-77-88-55
Turkey – Istanbul
Germany
HTS Division – Neunkirchen
Phone:
Fax:
Phone:
+90-212-281-8181…3
+90-212-282-5130/5430
+90-212-281-8184
+49-2247-305-0
+49-2247-305-122
Poland – Warsaw
Phone:
Fax:
Fax:
+48-22-45-76-700
+48-22-45-76-720
Ukraine – Kiev
Great Britain –
Stanmore Middlesex
Phone:
Fax:
Product Information Center:
(Technical Support)
Freephone GB: 0800-267-666
Phone:
Fax:
Great Britain – Dorcan, Swindon
Raychem Products
Phone:
Fax:
Phone:
Fax:
+38-044-238-6908
+38-044-568-5740
Romania – Bucharest
Phone:
Fax:
+44-181-954-2356
+44-181-954-6234
+40-1-311-3479+3596
+40-1-312-0574
Russia – Moscow
Phone:
Fax:
+7-095-926-55-06…09
+7-095-926-55-05
+44-141 810 8967…69
+44-141 810 8971
Russia – St. Petersburg
Phone:
Fax:
+7-812-325-30-83
+7-812-325-32-88
+44-1793-528171
+44-1793-572516
Scotland – Dundee
Madison Cable Products
Phone:
Fax:
Greece – Athens
Phone:
Fax:
+44-1382-508080
+44-1382-505060
+30-1-9370-396/397
+30-1-9370-655
(Technical Support)
Phone:
Fax:
+33-1-3420-8943
+33-1-3420-8623
Slovakia – Banská Bystrica
Hungary – Budapest
Phone:
Fax:
+421-48-415-20-11/12
+421-48-415-20-13
Phone:
Fax:
+36-1-289-1000
+36-1-289-1010
France
Tyco Electronics Export –
St Ouen L’Aumone
Phone:
Fax:
Slovenia – Ljubljana
Phone:
Fax:
+386-1561-3270
+386-1561-3240
+33-1-3440-7200
+33-1-3440-7220 or
+33-1-3440-7230
South Africa – Port Elizabeth
Phone:
Fax:
+27-41-405-4500
+27-41-486-1314
1654542–2.5M–KRG–FP–12-03
Printed in the U.S.A.
Tyco Electronics Corporation
www.tycoelectronics.com
相关型号:
MW6IC2015GNBR1
1805 MHz - 1990 MHz RF/MICROWAVE NARROW BAND HIGH POWER AMPLIFIER, ROHS COMPLIANT, PLASTIC, CASE 1329A-04, WB-16 GULL, TO-272, 16 PIN
NXP
MW6IC2015NBR1
1805MHz - 1990MHz RF/MICROWAVE NARROW BAND HIGH POWER AMPLIFIER, ROHS COMPLIANT, PLASTIC, CASE 1329-09, WB-16, TO-272, 16 PIN
NXP
©2020 ICPDF网 联系我们和版权申明