AA3528ZGC/G [KINGBRIGHT]
3.5x2.8mm SURFACE MOUNT LED LAMP;型号: | AA3528ZGC/G |
厂家: | KINGBRIGHT CORPORATION |
描述: | 3.5x2.8mm SURFACE MOUNT LED LAMP |
文件: | 总5页 (文件大小:265K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3.5x2.8mm SURFACE MOUNT LED LAMP
Part Number: AA3528ZGC/G
Green
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
Descriptions
z Single color.
z The Green source color devices are made with InGaN
Light Emitting Diode.
z Suitable for all SMD assembly and solder process.
z Available on tape and reel.
z Ideal for backlighting.
z Electrostatic discharge and power surge could damage
the LEDs.
z Package : 2000pcs / reel.
z It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs.
z All devices, equipments and machineries must be
electrically grounded.
z Moisture sensitivity level : level 3.
z RoHS compliant.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAK0925
APPROVED: Wynec
REV NO: V.4B
DATE: APR/25/2016
DRAWN: J.L.Liang
PAGE: 1 OF 5
CHECKED: Allen Liu
ERP: 1201005407
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Emitting Color (Material)
Lens Type
Min.
Typ.
2θ1/2
AA3528ZGC/G
Notes:
Green (InGaN)
Water Clear
1000
1400
120°
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous Flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD [1]
Δλ1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Emitting Color
Green
Typ.
520
525
35
Max.
Units
Test Conditions
IF=20mA
nm
nm
nm
pF
V
Green
IF=20mA
Green
IF=20mA
Green
100
3.2
VF=0V;f=1MHz
IF=20mA
VF [2]
IR
Forward Voltage
Green
4
Reverse Current
Green
50
uA
VR=5V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Values
120
30
Units
mW
mA
mA
V
Power dissipation
DC Forward Current
Peak Forward Current [1]
Electrostatic Discharge Threshold (HBM)
Reverse Voltage
100
450
5
V
Operating Temperature
Storage Temperature
-40°C To +85°C
-40°C To +85°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static
electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
SPEC NO: DSAK0925
APPROVED: Wynec
REV NO: V.4B
DATE: APR/25/2016
DRAWN: J.L.Liang
PAGE: 2 OF 5
CHECKED: Allen Liu
ERP: 1201005407
Green
AA3528ZGC/G
SPEC NO: DSAK0925
APPROVED: Wynec
REV NO: V.4B
DATE: APR/25/2016
DRAWN: J.L.Liang
PAGE: 3 OF 5
CHECKED: Allen Liu
ERP: 1201005407
AA3528ZGC/G
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAK0925
APPROVED: Wynec
REV NO: V.4B
DATE: APR/25/2016
DRAWN: J.L.Liang
PAGE: 4 OF 5
CHECKED: Allen Liu
ERP: 1201005407
PACKING & LABEL SPECIFICATIONS
AA3528ZGC/G
Terms and conditions for the usage of this document
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without
notice. Before production usage customer should refer to the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental
and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible
for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has
special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with
Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes
SPEC NO: DSAK0925
APPROVED: Wynec
REV NO: V.4B
DATE: APR/25/2016
DRAWN: J.L.Liang
PAGE: 5 OF 5
CHECKED: Allen Liu
ERP: 1201005407
相关型号:
©2020 ICPDF网 联系我们和版权申明