AA3529QB24ZS [KINGBRIGHT]
3.5x2.8 mm SMD CHIP LED LAMP; 3.5x2.8毫米SMD贴片LED LAMP型号: | AA3529QB24ZS |
厂家: | KINGBRIGHT CORPORATION |
描述: | 3.5x2.8 mm SMD CHIP LED LAMP |
文件: | 总6页 (文件大小:234K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3.5x2.8 mm SMD CHIP LED LAMP
PRELIMINARY SPEC
Part Number: AA3529QB24ZS
BLUE
數位簽署
者:yalin
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
DN:cn=yalin,o,
ou,
yal
in
email=sjhou@ cn
.kingbright.com,
c=<無>
SENSITIVE
DEVICES
日期 2007.12.07
09:20:03+08'00'
Features
Description
z SINGLE COLOR.
The Blue source color devices are made with InGaAlN
Vertical Light Emitting Diode.
z SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER
PROCESS.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
z AVAILABLE ON TAPE AND REEL.
z IDEAL FOR BACKLIGHTING.
z WHITE SMD PACKAGE, SILICONE RESIN.
z LOW THERMAL RESISTANCE.
z PACKAGE: 1500PCS / REEL.
All devices, equipment and machinery must be electrically
grounded.
z MOISTURE SENSITIVITY LEVEL : LEVEL 4.
z RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAH9589
APPROVED: WYNEC
REV NO: V.1
DATE: DEC/06/2007
DRAWN: R.Chen
PAGE: 1 OF 6
CHECKED: Allen Liu
ERP: 1201003134
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might leads to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Outside impact may scratch the silicone lens or
damage the internal circuitry.
1. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diameter
of the nozzle should be as large as possible.
2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup
and avoid damage during production.
SPEC NO: DSAH9589
APPROVED: WYNEC
REV NO: V.1
DATE: DEC/06/2007
DRAWN: R.Chen
PAGE: 2 OF 6
CHECKED: Allen Liu
ERP: 1201003134
Selection Guide
Iv (mcd) [2]
@ 150mA
Φv (mlm) [2]
@ 150mA
Viewing
Angle [1]
Dice
Lens Type
Part No.
Min.
1200
Typ.
Min.
Typ.
2 θ 1/2
120 °
AA3529QB24ZS
Notes:
BLUE (InGaAlN)
WATER CLEAR
1500
5500
7000
1.θ 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2.Luminous Intensity/ Luminous Flux: +/-15%
Electrical / Optical Characteristics at TA=25°C
Symbol
λ peak
λ D[1]
Δλ 1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Device
Typ.
450
457
20
Max.
Units
Test Conditions
IF=150mA
Blue
Blue
Blue
Blue
Blue
nm
nm
nm
pF
V
IF=150mA
IF=150mA
110
3.5
VF=0V;f=1MHz
IF=150mA
VF[2]
Forward Voltage
3.9
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Blue
Units
mW
Power dissipation
585
150
140
DC Forward Current
mA
Thermal Resistance
°C/W
Operating/Storage Temperature
-40°C To +85°C
SPEC NO: DSAH9589
APPROVED: WYNEC
REV NO: V.1
CHECKED: Allen Liu
DATE: DEC/06/2007
DRAWN: R.Chen
PAGE: 3 OF 6
ERP: 1201003134
BLUE
AA3529QB24ZS
SPEC NO: DSAH9589
APPROVED: WYNEC
REV NO: V.1
DATE: DEC/06/2007
DRAWN: R.Chen
PAGE: 4 OF 6
CHECKED: Allen Liu
ERP: 1201003134
AA3529QB24ZS
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAH9589
APPROVED: WYNEC
REV NO: V.1
DATE: DEC/06/2007
DRAWN: R.Chen
PAGE: 5 OF 6
CHECKED: Allen Liu
ERP: 1201003134
PACKING & LABEL SPECIFICATIONS
AA3529QB24ZS
SPEC NO: DSAH9589
APPROVED: WYNEC
REV NO: V.1
DATE: DEC/06/2007
DRAWN: R.Chen
PAGE: 6 OF 6
CHECKED: Allen Liu
ERP: 1201003134
相关型号:
©2020 ICPDF网 联系我们和版权申明