AA3535QR425Z1S-C1 [KINGBRIGHT]
SINGLE COLOR LED, COOL WHITE, 2.6mm, ROHS COMPLIANT, SMD, 4 PIN;型号: | AA3535QR425Z1S-C1 |
厂家: | KINGBRIGHT CORPORATION |
描述: | SINGLE COLOR LED, COOL WHITE, 2.6mm, ROHS COMPLIANT, SMD, 4 PIN 光电 |
文件: | 总7页 (文件大小:333K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3.5x3.5 mm SMD CHIP LED LAMP
Part Number: AA3535QR425Z1S-C1
Cool White
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Description
Features
The source color devices are made with InGaN on Al2O3
substrate Light Emitting Diode.
z White SMD package, silicone resin.
z Low thermal resistance.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
z Compatible with IR-reflow processes.
z ESD protection.
z Package: 2000pcs / reel.
z Moisture sensitivity level : level 2a.
z RoHS compliant
All devices, equipment and machinery must be electrically
grounded.
Applications
z Signal and symbol luminaire for orientation.
z Marker lights (e.g. steps, exit ways, etc).
z Decorative and entertainment lighting.
z Commercial and residential lighting.
z Automotive interior lighting.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAK2589
APPROVED: WYNEC
REV NO: V.3
DATE: OCT/14/2011
DRAWN: Y.H.Wu
PAGE: 1 OF 7
CHECKED: Allen Liu
ERP: 1201005741
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might lead to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or
damage the internal circuitry.
4.1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks.
4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup
and avoid damage during production.
5. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of
leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.
SPEC NO: DSAK2589
APPROVED: WYNEC
REV NO: V.3
DATE: OCT/14/2011
DRAWN: Y.H.Wu
PAGE: 2 OF 7
CHECKED: Allen Liu
ERP: 1201005741
Selection Guide
Iv (cd) [2] Φv (lm) [2]
@ 150mA @ 150mA*
Viewing
Angle [1]
CCT Range (K)
CRI
Color
Lens Type
Part No.
2 θ 1/2
120 °
Min. Typ. Max.
Typ.
Min. Typ. Min. Typ.
AA3535QR425Z1S-C1
Notes:
Cool White
5310 6000 7040
65
Water Clear
6.7 8.5
20
29
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.*LEDs are binned according to their luminous flux.
Absolute Maximum Ratings at TA=25°C
Parameter
Power Dissipation
Symbol
PD
Value
600
Unit
mW
°C
Junction Temperature [1]
Operating Temperature
Storage Temperature
DC Forward Current [1]
Peak Forward Current [2]
Reverse Voltage
TJ
110
Top
Tstg
IF
-40 To +85
-40 To +85
150
°C
°C
mA
mA
V
IFM
300
VR
5
Thermal Resistance [1]
(Junction/ambient)
Rth j-a
Rth j-S
180
°C/W
Thermal Resistance [1]
(Junction/solder point)
60
°C/W
V
Electrostatic Discharge Threshold (HBM)
Notes:
8000
1.Results from mounting on PC board FR4(pad size ≥ 70mm2), mounted on pc board-metal core PCB is recommend
for lowest thermal Resistance.
2.1/10 Duty Cycle, 0.1ms Pulse Width.
Electrical / Optical Characteristics at TA=25°C
Parameter
Symbol
Value
Unit
Forward Voltage IF = 150mA [Min.]
Forward Voltage IF = 150mA [Typ.]
Forward Voltage IF = 150mA [Max.]
Allowable Reverse Current [Max.]
Temperature coefficient of VF
2.7
3.5
4.0
85
VF [1]
V
IR
mA
TCV
-3.1
-0.15
-0.13
mV/° C
IF=150mA, -10 ° C≤ T≤100 ° C
[Typ.]
Temperature coefficient of X
10-3/° C
10-3/° C
TCX
TCy
IF=150mA, -10 ° C≤ T≤100 ° C
[Typ.]
[Typ.]
Temperature coefficient of Y
IF=150mA, -10 ° C≤ T≤100 ° C
Notes:
1.Measurement tolerance of the chromaticity coordinates is ±0.01.
2.Forward Voltage: +/-0.1V.
SPEC NO: DSAK2589
APPROVED: WYNEC
REV NO: V.3
DATE: OCT/14/2011
DRAWN: Y.H.Wu
PAGE: 3 OF 7
CHECKED: Allen Liu
ERP: 1201005741
SPEC NO: DSAK2589
APPROVED: WYNEC
REV NO: V.3
DATE: OCT/14/2011
DRAWN: Y.H.Wu
PAGE: 4 OF 7
CHECKED: Allen Liu
ERP: 1201005741
CCT 2500-7000 K Bin Code
0.44
0.42
0.40
0.38
0.36
0.34
0.32
0.30
3000 K
2500 K
4000 K
1
3
2
5
7
9
4
11
6
13
12
5000 K
8
10
15
W1
W2
14
17
6000 K
16
W3
19
18
21
N1
20
7000 K
23
24
22
25
26
N2
27
28
C1
0.28
0.30
0.32
0.34
0.36
0.38
0.40
0.42
0.44
0.46
0.48
0.50
x
CCT (K)
Typ. Max.
Color
Group Chromaticity Regions
W1 1, 2, 3, 4
Min.
2580 2700 2870
2870 3000 3220
3220 3500 3710
3710 4000 4260
4260 4700 5310
5310 6000 7040
Notes:
Warm White W2 5, 6, 7, 8
W3 9, 10, 11, 12
Shipment may contain more than one chromaticity
regions.Orders for single chromaticity region are
generally not accepted.
Measurement tolerance of the chromaticity
coordinates is ±0.01.
N1 13, 14, 15, 16
Neutral White
N2 17, 18, 19, 20, 21, 22
C1 23, 24, 25, 26, 27, 28
Cool White
x
y
x
y
x
y
x
y
0.4582
0.4687
0.4099
0.4289
0.4319
0.4147
0.4221
0.4342
0.3814
0.3984
0.4028
0.3702
0.3736
0.3869
0.3722
0.3874
0.3958
0.3481
0.3370
0.3364
0.3557
0.3472
0.3328
1
8
9
15
16
17
22
23
24
0.4813
0.4700
0.4483
0.4126
0.4259
0.3853
0.3825
0.3798
0.3466
0.3411
0.3919
0.4099
0.4126
0.3944
0.4080
0.4146
0.4299
0.4221
0.3916
0.4089
0.4165
0.3984
0.3670
0.3702
0.3825
0.3783
0.3578
0.3722
0.3798
0.3646
0.3376
0.3260
0.3265
0.3370
0.3616
0.3512
0.3371
0.3472
0.4582
2
0.4700
0.4593
0.4465
0.4071
0.4260
0.4289
0.4099
0.4017
0.4080
0.4221
0.4147
0.3751
0.3916
0.3984
0.3814
0.3736
0.3616
0.3592
0.3703
0.3874
0.3788
0.3641
0.3726
0.3370
0.3265
0.3270
0.3364
0.3472
0.3371
0.3230
0.3328
0.4562
3
10
0.4687
0.4582
0.4373
0.3893
0.4071
0.4099
0.3919
0.4028
0.4212
0.4260
0.4071
0.3853
0.4028
0.4071
0.3893
0.3984
0.4165
0.4212
0.4028
0.3941
0.3996
0.4146
0.4080
0.3889
0.3941
0.4080
0.4017
0.3825
0.3869
0.4006
0.3950
0.3783
0.3825
0.3950
0.3898
0.3848
0.4015
0.4089
0.3916
0.3690
0.3848
0.3916
0.3751
0.3798
0.3958
0.4044
0.3875
0.3646
0.3798
0.3875
0.3716
0.3703
0.3592
0.3568
0.3670
0.3616
0.3496
0.3481
0.3592
0.3592
0.3481
0.3466
0.3568
0.3496
0.3376
0.3370
0.3481
0.3726
0.3641
0.3495
0.3578
0.3788
0.3702
0.3557
0.3641
0.3641
0.3557
0.3411
0.3495
0.3702
0.3616
0.3472
0.3557
0.3260
0.3144
0.3160
0.3265
0.3265
0.3160
0.3175
0.3270
0.3144
0.3028
0.3055
0.3160
0.3160
0.3055
0.3081
0.3175
0.3512
0.3408
0.3274
0.3371
0.3371
0.3274
0.3139
0.3230
0.3408
0.3304
0.3177
0.3274
0.3274
0.3177
0.3049
0.3139
0.4465
4
11
12
13
14
18
19
20
21
25
26
27
28
0.4582
0.4483
0.4342
0.4430
5
0.4562
0.4465
0.4259
0.4342
6
0.4465
0.4373
0.4221
0.4299
7
0.4430
0.4342
SPEC NO: DSAK2589
APPROVED: WYNEC
REV NO: V.3
CHECKED: Allen Liu
DATE: OCT/14/2011
DRAWN: Y.H.Wu
PAGE: 5 OF 7
ERP: 1201005741
AA3535QR425Z1S-C1
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Reel Dimension
Recommended Soldering Pattern
(Units : mm; Tolerance: ±0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAK2589
APPROVED: WYNEC
REV NO: V.3
DATE: OCT/14/2011
DRAWN: Y.H.Wu
PAGE: 6 OF 7
CHECKED: Allen Liu
ERP: 1201005741
PACKING & LABEL SPECIFICATIONS
AA3535QR425Z1S-C1
數位簽署
者:yal
:cn=yal
i
n
D
N
i
n,o,
專用,
n@ yal
n.com,c=<無>
yal
in
ou=SPEC
emai
l
=yali
i
日期 2011.10.15
10:12:10+08'00'
SPEC NO: DSAK2589
APPROVED: WYNEC
REV NO: V.3
DATE: OCT/14/2011
DRAWN: Y.H.Wu
PAGE: 7 OF 7
CHECKED: Allen Liu
ERP: 1201005741
相关型号:
©2020 ICPDF网 联系我们和版权申明