AA3529SES/L [KINGBRIGHT]
3.5x2.8 mm SMD CHIP LED LAMP; 3.5x2.8毫米SMD贴片LED LAMP
| 型号： | AA3529SES/L |
| 厂家： | 
KINGBRIGHT CORPORATION |
| 描述： | 3.5x2.8 mm SMD CHIP LED LAMP |
| 文件： | 总6页 (文件大小：223K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
3.5x2.8 mm SMD CHIP LED LAMP
PRELIMINARY SPEC
Part Number: AA3529SES/L
RED-ORANGE
Description
Features
The Red-orange device is made with TS AlInGaP light
emitting diode.
z SINGLE COLOR.
z SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER
PROCESS.
z AVAILABLE ON TAPE AND REEL.
z IDEAL FOR BACKLIGHTING.
z WHITE SMD PACKAGE, SILICONE RESIN.
z LOW THERMAL RESISTANCE.
z PACKAGE: 1500PCS / REEL.
z MOISTURE SENSITIVITY LEVEL : LEVEL 2a.
z RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAH3956
APPROVED: WYNEC
REV NO: V.4
DATE: JAN/14/2008
DRAWN: R.CHEN
PAGE: 1 OF 6
CHECKED: Allen Liu
ERP: 1201002739
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might leads to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Outside impact may scratch the silicone lens or
damage the internal circuitry.
4. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diameter
of the nozzle should be as large as possible.
5. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
6. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup
and avoid damage during production.
SPEC NO: DSAH3956
APPROVED: WYNEC
REV NO: V.4
DATE: JAN/14/2008
DRAWN: R.CHEN
PAGE: 2 OF 6
CHECKED: Allen Liu
ERP: 1201002739
Selection Guide
Iv (mcd) [2]
@ 150mA
Φv (mlm) [2]
@ 150mA
Viewing
Angle [1]
Dice
Lens Type
Part No.
Min.
3800
Typ.
Min.
Typ.
2θ1/2
120°
AA3529SES/L
Notes:
RED-ORANGE (AlInGaP)
WATER CLEAR
6000
2500
4000
數位簽署者：yalin
DN：cn=yalin,o,
ou,
yali
n
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
email=sjhou@ cn.
kingbright.com,
2. Luminous intensity / luminous flux: +/-15%.
c=<無>
日期 2008.01.15
13:10:46+08'00'
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD [1]
Δλ1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Device
Red-orange
Red-orange
Red-orange
Red-orange
Red-orange
Red-orange
Typ.
626
618
20
Max.
Units
Test Conditions
IF=150mA
nm
nm
nm
pF
V
IF=150mA
IF=150mA
25
VF=0V;f=1MHz
IF=150mA
VF [2]
IR
Forward Voltage
2.9
3.5
10
Reverse Current
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Red-orange
Units
mW
mA
mA
V
Power dissipation
525
150
350
5
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
Operating / Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAH3956
APPROVED: WYNEC
REV NO: V.4
DATE: JAN/14/2008
DRAWN: R.CHEN
PAGE: 3 OF 6
CHECKED: Allen Liu
ERP: 1201002739
Red-orange
AA3529SES/L
SPEC NO: DSAH3956
APPROVED: WYNEC
REV NO: V.4
DATE: JAN/14/2008
DRAWN: R.CHEN
PAGE: 4 OF 6
CHECKED: Allen Liu
ERP: 1201002739
AA3529SES/L
Recommended Soldering Pattern
(Units : mm; Tolerance: ±0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAH3956
APPROVED: WYNEC
REV NO: V.4
DATE: JAN/14/2008
DRAWN: R.CHEN
PAGE: 5 OF 6
CHECKED: Allen Liu
ERP: 1201002739
PACKING & LABEL SPECIFICATIONS
AA3529SES/L
SPEC NO: DSAH3956
APPROVED: WYNEC
REV NO: V.4
DATE: JAN/14/2008
DRAWN: R.CHEN
PAGE: 6 OF 6
CHECKED: Allen Liu
ERP: 1201002739
相关型号：
©2020 ICPDF网 联系我们和版权申明