AUIRFR8403TRL [INFINEON]
Advanced Process Technology, New Ultra Low On-Resistance; 先进的工艺技术,新型超低导通电阻型号: | AUIRFR8403TRL |
厂家: | Infineon |
描述: | Advanced Process Technology, New Ultra Low On-Resistance |
文件: | 总13页 (文件大小:285K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AUIRFR8403
AUIRFU8403
AUTOMOTIVE GRADE
HEXFET® Power MOSFET
Features
l
l
l
l
l
l
l
Advanced Process Technology
D
S
VDSS
40V
New Ultra Low On-Resistance
175°C Operating Temperature
Fast Switching
Repetitive Avalanche Allowed up to Tjmax
Lead-Free, RoHS Compliant
Automotive Qualified *
RDS(on) typ.
max.
2.4m
3.1m
Ω
Ω
G
ID
127A
100A
(Silicon Limited)
Description
ID
(Package Limited)
Specifically designed for Automotive applications, this HEXFET®
Power MOSFET utilizes the latest processing techniques to achieve
extremely low on-resistance per silicon area. Additional features of
this design are a 175°C junction operating temperature, fast switching
speed and improved repetitive avalanche rating. These features
combine to make this design an extremely efficient and reliable device
foruseinAutomotiveapplicationsandwidevarietyofotherapplications.
D
D
S
S
D
G
G
Applications
D-Pak
I-Pak
AUIRFU8403
l
l
l
l
l
Electric Power Steering (EPS)
Battery Switch
Start/Stop Micro Hybrid
Heavy Loads
DC-DC Converter
AUIRFR8403
G
D
S
Gate
Drain
Source
Ordering Information
Base part number
Package Type
Standard Pack
Complete Part Number
Form
Tube
Tape and Reel
Tape and Reel Left
Tape and Reel Right
Tube
Quantity
AUIRFR8403
DPak
75
AUIRFR8403
AUIRFR8403TR
AUIRFR8403TRL
AUIRFR8403TRR
AUIRFU8403
2000
3000
3000
75
AUIRFU8403
IPak
AbsoluteMaximumRatings
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only; and functional
operationofthedeviceattheseoranyotherconditionbeyondthoseindicatedinthespecificationsisnotimplied. Exposuretoabsolute-maximum-ratedconditions
for extended periods may affect device reliability. The thermal resistance and power dissipation ratings are measured under board mounted and still air
conditions. Ambient temperature (TA) is 25°C, unless otherwise specified.
Symbol
ID @ TC = 25°C
ID @ TC = 100°C
ID @ TC = 25°C
IDM
Parameter
Max.
127
Units
Continuous Drain Current, VGS @ 10V (Silicon Limited)
Continuous Drain Current, VGS @ 10V (Silicon Limited)
Continuous Drain Current, VGS @ 10V (Package Limited)
Pulsed Drain Current
90
A
100
520
99
PD @TC = 25°C
Maximum Power Dissipation
W
W/°C
V
0.66
Linear Derating Factor
± 20
VGS
TJ
Gate-to-Source Voltage
-55 to + 175
Operating Junction and
°C
TSTG
Storage Temperature Range
300
Soldering Temperature, for 10 seconds (1.6mm from case)
Avalanche Characteristics
EAS (Thermally limited) Single Pulse Avalanche Energy
114
148
mJ
EAS (tested)
IAR
Single Pulse Avalanche Energy Tested Value
See Fig. 14, 15, 24a, 24b
Avalanche Current
A
EAR
Repetitive Avalanche Energy
mJ
Thermal Resistance
Symbol
Parameter
Typ.
–––
–––
–––
Max.
1.52
50
Units
Rθ
JC
Rθ
JA
Rθ
JA
Junction-to-Case
°C/W
Junction-to-Ambient (PCB Mount)
Junction-to-Ambient
110
HEXFET®isaregisteredtrademarkofInternationalRectifier.
*Qualificationstandardscanbefoundathttp://www.irf.com/
1
www.irf.com
© 2013 International Rectifier
April 25, 2013
AUIRFR/U8403
Static @ TJ = 25°C (unless otherwise specified)
Symbol
Parameter
Min. Typ. Max. Units
Conditions
V(BR)DSS
Drain-to-Source Breakdown Voltage
40
––– –––
V
VGS = 0V, ID = 250μA
ΔV(BR)DSS/ΔTJ Breakdown Voltage Temp. Coefficient
––– 0.03 ––– V/°C Reference to 25°C, ID = 5mA
mΩ
V
RDS(on)
VGS(th)
IDSS
Static Drain-to-Source On-Resistance
Gate Threshold Voltage
––– 2.4
2.2 3.0
3.1
3.9
VGS = 10V, ID = 76A
VDS = VGS, ID = 100μA
VDS = 40V, VGS = 0V
Drain-to-Source Leakage Current
––– ––– 1.0
––– ––– 150
––– ––– 100
––– ––– -100
––– 1.5 –––
μA
VDS = 40V, VGS = 0V, TJ = 125°C
IGSS
RG
Gate-to-Source Forward Leakage
Gate-to-Source Reverse Leakage
Internal Gate Resistance
V
GS = 20V
nA
VGS = -20V
Ω
Dynamic @ TJ = 25°C (unless otherwise specified)
Symbol Parameter
Min. Typ. Max. Units
Conditions
gfs
Forward Transconductance
283 ––– –––
S
VDS = 10V, ID = 76A
Qg
Total Gate Charge
–––
–––
–––
–––
–––
–––
–––
–––
66
18
22
44
10
32
31
23
99
ID = 76A
Qgs
Qgd
Qsync
td(on)
tr
Gate-to-Source Charge
Gate-to-Drain ("Miller") Charge
Total Gate Charge Sync. (Qg - Qgd)
Turn-On Delay Time
Rise Time
–––
–––
–––
–––
–––
–––
–––
VDS =20V
nC
V
GS = 10V
ID = 76A, VDS =0V, VGS = 10V
VDD = 26V
ID = 76A
ns
td(off)
tf
Turn-Off Delay Time
Fall Time
RG = 2.7Ω
VGS = 10V
Ciss
Coss
Crss
Input Capacitance
––– 3171 –––
––– 477 –––
––– 331 –––
––– 573 –––
––– 681 –––
VGS = 0V
Output Capacitance
Reverse Transfer Capacitance
VDS = 25V
pF ƒ = 1.0 MHz, See Fig. 5
GS = 0V, VDS = 0V to 32V , See Fig. 11
Coss eff. (ER) Effective Output Capacitance (Energy Related)
V
Coss eff. (TR) Effective Output Capacitance (Time Related)
VGS = 0V, VDS = 0V to 32V
Diode Characteristics
Symbol
Parameter
Min. Typ. Max. Units
Conditions
IS
Continuous Source Current
MOSFET symbol
D
S
––– ––– 127
A
(Body Diode)
Pulsed Source Current
showing the
integral reverse
ISM
G
––– ––– 520
(Body Diode)
p-n junction diode.
VSD
dv/dt
trr
Diode Forward Voltage
––– 0.9
1.3
V
TJ = 25°C, IS = 76A, VGS = 0V
Peak Diode Recovery
––– 5.1 ––– V/ns TJ = 175°C, IS = 76A, VDS = 40V
Reverse Recovery Time
–––
–––
–––
–––
25
26
20
21
–––
–––
–––
–––
TJ = 25°C
TJ = 125°C
TJ = 25°C
TJ = 125°C
TJ = 25°C
VR = 34V,
ns
IF = 76A
di/dt = 100A/μs
Qrr
Reverse Recovery Charge
Reverse Recovery Current
nC
A
IRRM
––– 1.2 –––
Notes:
Calculated continuous current based on maximum allowable
junction temperature. Bond wire current limit is 100A by source
bonding technology. Note that current limitations arising from heating
Coss eff. (TR) is a fixed capacitance that gives the same charging time
as Coss while VDS is rising from 0 to 80% VDSS
Coss eff. (ER) is a fixed capacitance that gives the same energy as
oss while VDS is rising from 0 to 80% VDSS
.
of the device leads may occur with some lead mounting arrangements.
(Refer to AN-1140)
Repetitive rating; pulse width limited by max. junction temperature.
C
.
When mounted on 1" square PCB (FR-4 or G-10 Material).
For recommended footprint and soldering techniques
refer to application note #AN-994.
Limited by TJmax, starting TJ = 25°C, L = 0.039mH, RG = 50Ω,
IAS = 76A, VGS =10V. Part not recommended for use above
Rθ is measured at TJ approximately 90°C.
this value.
Pulse drain current is limited by source bonding technology.
ISD ≤ 76A, di/dt ≤ 1255A/μs, VDD ≤ V(BR)DSS, TJ ≤ 175°C.
ꢀ Pulse width ≤ 400μs; duty cycle ≤ 2%.
2
www.irf.com
© 2013 International Rectifier
April 25, 2013
AUIRFR/U8403
1000
100
10
1000
100
10
VGS
15V
10V
7.0V
6.0V
5.5V
5.0V
4.5V
4.3V
VGS
15V
10V
7.0V
6.0V
5.5V
5.0V
4.5V
4.3V
TOP
TOP
BOTTOM
BOTTOM
4.3V
1
4.3V
1
60μs
Tj = 25°C
60μs
PULSE WIDTH
≤
PULSE WIDTH
≤
Tj = 175°C
0.1
1
0.1
10
100
0.1
1
10
100
V
, Drain-to-Source Voltage (V)
DS
V
, Drain-to-Source Voltage (V)
DS
Fig 1. Typical Output Characteristics
Fig 2. Typical Output Characteristics
1000
100
10
2.0
1.6
1.2
0.8
0.4
I
= 76A
D
V
= 10V
GS
T
= 175°C
J
T
= 25°C
J
1
V
= 10V
DS
≤
60μs PULSE WIDTH
0.1
2
3
4
5
6
7
8
-60
-20
20
60
100
140
180
T , Junction Temperature (°C)
J
V
, Gate-to-Source Voltage (V)
GS
Fig 4. Normalized On-Resistance vs. Temperature
Fig 3. Typical Transfer Characteristics
100000
10000
1000
14.0
V
= 0V,
= C
f = 1 MHZ
GS
I
= 76A
V
C
C
C
+ C , C
SHORTED
ds
D
iss
gs
gd
12.0
10.0
8.0
= C
rss
oss
gd
= 32V
= 20V
DS
= C + C
ds
gd
V
DS
C
iss
C
6.0
oss
4.0
C
rss
2.0
100
0.0
0.1
1
10
100
0
10 20 30 40 50 60 70 80 90
V
, Drain-to-Source Voltage (V)
Q , Total Gate Charge (nC)
G
DS
Fig 5. Typical Capacitance vs. Drain-to-Source Voltage
www.irf.com © 2013 International Rectifier
Fig 6. Typical Gate Charge vs. Gate-to-Source Voltage
3
April 25, 2013
AUIRFR/U8403
1000
100
10
10000
1000
100
10
OPERATION IN THIS AREA
LIMITED BY R (on)
DS
T
= 175°C
J
100μsec
1msec
T = 25°C
J
10msec
DC
1
1
Tc = 25°C
Tj = 175°C
Single Pulse
0.1
V
= 0V
GS
0.01
0.1
0.1
1
10
100
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
V
, Drain-to-Source Voltage (V)
V
, Source-to-Drain Voltage (V)
DS
SD
Fig 8. Maximum Safe Operating Area
Fig 7. Typical Source-Drain Diode
Forward Voltage
140
120
100
80
50
49
48
47
46
45
44
43
42
41
40
Id = 5.0mA
Limited By Package
60
40
20
0
25
50
75
100
125
150
175
-60
-20
20
60
100
140
180
T
, Case Temperature (°C)
T , Temperature ( °C )
C
J
Fig 9. Maximum Drain Current vs.
Fig 10. Drain-to-Source Breakdown Voltage
Case Temperature
0.5
0.4
0.4
0.3
0.3
0.2
0.2
0.1
0.1
0.0
500
400
300
200
100
0
I
D
13A
24A
TOP
BOTTOM 76A
-5
0
5
10 15 20 25 30 35 40 45
Drain-to-Source Voltage (V)
25
50
75
100
125
150
175
Starting T , Junction Temperature (°C)
J
V
DS,
Fig 11. Typical COSS Stored Energy
Fig 12. Maximum Avalanche Energy vs. DrainCurrent
4
www.irf.com © 2013 International Rectifier
April 25, 2013
AUIRFR/U8403
10
1
D = 0.50
0.20
0.10
0.05
0.1
0.02
0.01
0.01
SINGLE PULSE
Notes:
1. Duty Factor D = t1/t2
( THERMAL RESPONSE )
2. Peak Tj = P dm x Zthjc + Tc
0.001
1E-006
1E-005
0.0001
0.001
0.01
0.1
t
, Rectangular Pulse Duration (sec)
1
Fig 13. Maximum Effective Transient Thermal Impedance, Junction-to-Case
1000
100
10
Duty Cycle = Single Pulse
Allowed avalanche Current vs avalanche
Δ
pulsewidth, tav, assuming Tj = 150°C and
Tstart =25°C (Single Pulse)
0.01
0.05
0.10
1
Allowed avalanche Current vs avalanche
ΔΤ
pulsewidth, tav, assuming
Tstart = 150°C.
j = 25°C and
0.1
1.0E-06
1.0E-05
1.0E-04
1.0E-03
1.0E-02
1.0E-01
tav (sec)
Fig 14. Typical Avalanche Current vs.Pulsewidth
Notes on Repetitive Avalanche Curves , Figures 14, 15
(For further info, see AN-1005 at www.irf.com)
1. Avalanche failures assumption:
Purely a thermal phenomenon and failure occurs at a temperature far in
excess of Tjmax. This is validated for every part type.
2. Safe operation in Avalanche is allowed as long asTjmax is not exceeded.
3. Equation below based on circuit and waveforms shown in Figures 24a, 24b.
4. PD (ave) = Average power dissipation per single avalanche pulse.
5. BV = Rated breakdown voltage (1.3 factor accounts for voltage increase
during avalanche).
6. Iav = Allowable avalanche current.
7. ΔT = Allowable rise in junction temperature, not to exceed Tjmax (assumed as
25°C in Figure 14, 15).
tav = Average time in avalanche.
D = Duty cycle in avalanche = tav ·f
120
100
80
60
40
20
0
TOP
BOTTOM 1.0% Duty Cycle
= 76A
Single Pulse
I
D
ZthJC(D, tav) = Transient thermal resistance, see Figures 13)
PD (ave) = 1/2 ( 1.3·BV·Iav) = DT/ ZthJC
Iav = 2DT/ [1.3·BV·Zth]
25
50
75
100
125
150
175
EAS (AR) = PD (ave)·tav
Starting T , Junction Temperature (°C)
J
Fig 15. Maximum Avalanche Energy vs. Temperature
5
www.irf.com © 2013 International Rectifier
April 25, 2013
AUIRFR/U8403
8.0
6.0
4.0
2.0
0.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
I
= 76A
D
T
T
= 125°C
= 25°C
J
ID = 100μA
ID = 250μA
ID = 1.0mA
ID = 1.0A
J
4
6
8
10 12 14 16
18 20
-75
-25
25
75
125
175
225
T , Temperature ( °C )
J
V
Gate -to -Source Voltage (V)
GS,
Fig 16. On-Resistance vs. Gate Voltage
Fig 17. Threshold Voltage vs. Temperature
6
90
80
70
60
50
40
30
20
10
I = 51A
F
I = 51A
F
V
= 34V
V
= 34V
R
R
5
4
3
2
1
0
T = 25°C
T = 25°C
J
J
T = 125°C
J
T = 125°C
J
0
200
400
600
800
1000
0
200
400
600
800
1000
di /dt (A/μs)
di /dt (A/μs)
F
F
Fig. 19 - Typical Stored Charge vs. dif/dt
Fig. 18 - Typical Recovery Current vs. dif/dt
6
80
I = 76A
F
I = 76A
F
V
= 34V
V
= 34V
R
5
4
3
2
1
0
R
T = 25°C
T = 25°C
J
J
60
40
20
0
T = 125°C
J
T = 125°C
J
0
200
400
600
800
1000
0
200
400
600
800
1000
di /dt (A/μs)
di /dt (A/μs)
F
F
Fig. 21 - Typical Stored Charge vs. dif/dt
Fig. 20 - Typical Recovery Current vs. dif/dt
www.irf.com © 2013 International Rectifier
6
April 25, 2013
AUIRFR/U8403
10.0
8.0
6.0
4.0
2.0
0.0
VGS = 5.5V
VGS = 6.0V
VGS = 7.0V
VGS = 8.0V
VGS = 10V
0
100
200
300
400
500
I , Drain Current (A)
D
Fig 22. Typical On-Resistance vs. Drain Current
7
www.irf.com
© 2013 International Rectifier
April 25, 2013
AUIRFR/U8403
Driver Gate Drive
P.W.
P.W.
Period
D =
D.U.T
Period
+
*
=10V
V
GS
CircuitLayoutConsiderations
• Low Stray Inductance
• Ground Plane
• Low Leakage Inductance
Current Transformer
-
D.U.T. I Waveform
SD
+
-
Reverse
Recovery
Current
Body Diode Forward
Current
di/dt
-
+
D.U.T. V Waveform
DS
Diode Recovery
dv/dt
V
DD
VDD
Re-Applied
Voltage
• dv/dtcontrolledbyRG
RG
+
-
Body Diode
Forward Drop
• Driver same type as D.U.T.
• ISD controlled by Duty Factor "D"
• D.U.T. - Device Under Test
InductorCurrent
I
SD
Ripple ≤ 5%
* VGS = 5V for Logic Level Devices
Fig 23. Peak Diode Recovery dv/dt Test Circuit for N-Channel
HEXFET® Power MOSFETs
V
(BR)DSS
15V
t
p
DRIVER
+
L
V
DS
D.U.T
AS
R
G
V
DD
-
I
A
V
GS
Ω
0.01
t
p
I
AS
Fig 24b. Unclamped Inductive Waveforms
Fig 24a. Unclamped Inductive Test Circuit
RD
VDS
V
DS
90%
VGS
D.U.T.
RG
+
VDD
-
VGS
10%
PulseWidth ≤ 1 µs
Duty Factor ≤ 0.1 %
V
GS
t
t
r
t
t
f
d(on)
d(off)
Fig 25a. Switching Time Test Circuit
Fig 25b. Switching Time Waveforms
Id
Current Regulator
Same Type as D.U.T.
Vds
Vgs
50KΩ
.2μF
12V
.3μF
+
V
DS
D.U.T.
-
Vgs(th)
V
GS
3mA
I
I
D
G
Qgs1
Qgs2
Qgd
Qgodr
Current Sampling Resistors
Fig 26a. Gate Charge Test Circuit
www.irf.com © 2013 International Rectifier
Fig 26b. Gate Charge Waveform
8
April 25, 2013
AUIRFR/U8403
D-Pak (TO-252AA) Package Outline
Dimensions are shown in millimeters (inches)
D-Pak (TO-252AA) Part Marking Information
PartNumber
AUIRFR8403
DateCode
Y= Year
WW= Work Week
A= Automotive, Lead Free
IRLogo
YWWA
XX or XX
LotCode
Note: For the most current drawing please refer to IR website at http://www.irf.com/package/
9
www.irf.com
© 2013 International Rectifier
April 25, 2013
AUIRFR/U8403
I-Pak (TO-251AA) Package Outline ( Dimensions are shown in millimeters (inches)
I-Pak (TO-251AA) Part Marking Information
PartNumber
AUIRFU8403
Date Code
Y= Year
WW= Work Week
A= Automotive, Lead Free
IR Logo
YWWA
XX or XX
Lot Code
Note: For the most current drawing please refer to IR website at http://www.irf.com/package/
10
www.irf.com
© 2013 International Rectifier
April 25, 2013
AUIRFR/U8403
D-Pak (TO-252AA) Tape & Reel Information
Dimensions are shown in millimeters (inches)
TR
TRL
TRR
16.3 ( .641 )
15.7 ( .619 )
16.3 ( .641 )
15.7 ( .619 )
12.1 ( .476 )
11.9 ( .469 )
8.1 ( .318 )
7.9 ( .312 )
FEED DIRECTION
FEED DIRECTION
NOTES :
1. CONTROLLING DIMENSION : MILLIMETER.
2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS ( INCHES ).
3. OUTLINE CONFORMS TO EIA-481 & EIA-541.
13 INCH
16 mm
NOTES :
1. OUTLINE CONFORMS TO EIA-481.
Note: For the most current drawing please refer to IR website at http://www.irf.com/package/
11
www.irf.com
© 2013 International Rectifier
April 25, 2013
AUIRFR/U8403
Qualification Information†
Automotive
(per AEC-Q101)
Comments: This part number(s) passed Automotive
qualification. IR’s Industrial and Consumer qualification
level is granted by extension of the higher Automotive
level.
Qualification Level
3L-D-PAK
I-PAK
MSL1
N/A
Class M2 (+/- 200)††
Moisture Sensitivity Level
Machine Model
AEC-Q101-002
Class H1C (+/- 2000)††
AEC-Q101-001
Human Body Model
ESD
Class C5 (+/- 2000)††
AEC-Q101-005
Charged Device
Model
Yes
RoHS Compliant
Qualification standards can be found at International Rectifiers web site: http//www.irf.com/
Highest passing voltage.
12
www.irf.com
© 2013 International Rectifier
April 25, 2013
AUIRFR/U8403
IMPORTANTNOTICE
Unless specifically designated for the automotive market, International Rectifier Corporation and its subsidiaries (IR) reserve
the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services
at any time and to discontinue any product or services without notice. Part numbers designated with the “AU” prefix follow
automotive industry and / or customer specific requirements with regards to product discontinuance and process change
notification. All products are sold subject to IR’s terms and conditions of sale supplied at the time of order acknowledgment.
IR warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with IR’s
standard warranty. Testing and other quality control techniques are used to the extent IR deems necessary to support this
warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily
performed.
IR assumes no liability for applications assistance or customer product design. Customers are responsible for their products
and applications using IR components. To minimize the risks with customer products and applications, customers should
provideadequatedesignandoperatingsafeguards.
Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without alteration and is
accompaniedbyallassociatedwarranties,conditions,limitations,andnotices. Reproductionofthisinformationwithalterations
is an unfair and deceptive business practice. IR is not responsible or liable for such altered documentation. Information of
third parties may be subject to additional restrictions.
ResaleofIRproductsorservicedwithstatementsdifferentfromorbeyondtheparametersstatedbyIRforthatproductorservice
voids all express and any implied warranties for the associated IR product or service and is an unfair and deceptive business
practice. IR is not responsible or liable for any such statements.
IR products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the
body, orinotherapplicationsintendedtosupportorsustainlife, orinanyotherapplicationinwhichthefailureoftheIR product
could create a situation where personal injury or death may occur. Should Buyer purchase or use IR products for any such
unintended or unauthorized application, Buyer shall indemnify and hold International Rectifier and its officers, employees,
subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney
feesarisingoutof, directlyorindirectly, anyclaimofpersonalinjuryordeathassociatedwithsuchunintendedorunauthorized
use, even if such claim alleges that IR was negligent regarding the design or manufacture of the product.
OnlyproductscertifiedasmilitarygradebytheDefenseLogisticsAgency(DLA)oftheUSDepartmentofDefense,aredesigned
and manufactured to meet DLA military specifications required by certain military, aerospace or other applications. Buyers
acknowledgeandagreethatanyuseofIRproductsnotcertifiedbyDLAasmilitary-grade,inapplicationsrequiringmilitarygrade
products, is solely at the Buyer’s own risk and that they are solely responsible for compliance with all legal and regulatory
requirements in connection with such use.
IRproductsareneitherdesignednorintendedforuseinautomotiveapplicationsorenvironmentsunlessthespecificIRproducts
are designated by IR as compliant with ISO/TS 16949 requirements and bear a part number including the designation “AU”.
Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, IR will not be
responsible for any failure to meet such requirements.
For technical support, please contact IR’s Technical Assistance Center
http://www.irf.com/technical-info/
WORLDHEADQUARTERS:
101 N. Sepulveda Blvd., El Segundo, California 90245
Tel:(310)252-7105
13
www.irf.com
© 2013 International Rectifier
April 25, 2013
相关型号:
AUIRFR9024NTRL
Power Field-Effect Transistor, 11A I(D), 55V, 0.175ohm, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252AA, ROHS COMPLIANT, PLASTIC, DPAK-3
INFINEON
©2020 ICPDF网 联系我们和版权申明