19-213/BHC-AN1P2/3T [EVERLIGHT]
Chip LED (0.6 mm Height); 贴片LED (0.6 mm高度)型号: | 19-213/BHC-AN1P2/3T |
厂家: | EVERLIGHT ELECTRONICS CO., LTD |
描述: | Chip LED (0.6 mm Height) |
文件: | 总10页 (文件大小:162K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
0603 Package Chip LED (0.6 mm Height)
19-213/BHC-AN1P2/3T
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Mono-color type.
․Pb-free.
․The product itself will remain within RoHS compliant
version.
Descriptions
․The 19-213 SMD Taping is much smaller than
lead frame type components, thus enable smaller
board size, higher packing density, reduced
storage space and finally smaller equipment to be
obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Automotive: backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
Chip
Part No.
Lens Color
Material
Emitted Color
Blue
19-213/BHC-AN1P2/3T
InGaN
Water Clear
Everlight Electronics Co., Ltd.
Device No:SZDSE-193-B01
http://www.everlight.com
Prepared date: 07-27-2005
Rev. 2
Page: 1 of 10
Prepared by: Aihua hong
EVERLIGHT ELECTRONICS CO.,LTD.
19-213/BHC-AN1P2/3T
Package Outline Dimensions
-
+
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
Device No:SZDSE-193-B01
http://www.everlight.com
Prepared date: 07-27-2005
Rev. 2
Page: 2 of 10
Prepared by: Aihua hong
EVERLIGHT ELECTRONICS CO.,LTD.
19-213/BHC-AN1P2/3T
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
VR
Rating
Unit
Reverse Voltage
5
25
V
mA
℃
Forward Current
IF
Operating Temperature
Storage Temperature
Soldering Temperature
Electrostatic Discharge
Power Dissipation
Peak Forward Current
(Duty 1/10 @1KHz)
Topr
Tstg
Tsol
ESD
Pd
-40 ~ +85
-40 ~ +90
260 (for 5 second)
150
℃
℃
V
110
mW
IFP
100
mA
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Iv
Min.
28.5
-----
-----
Typ.
-----
120
468
Max.
72.0
-----
-----
Unit
Condition
IF=20mA
Luminous Intensity
Viewing Angle
mcd
deg
nm
2θ1/2
λp
Peak Wavelength
Dominant Wavelength
λd
464.5
-----
-----
-----
-----
25
476.5
-----
4.0
nm
Spectrum Radiation
Bandwidth
△λ
nm
V
Forward Voltage
VF
3.5
VR=5V
Reverse Current
IR
-----
50
μA
Notes:
1.Tolerance of Luminous Intensity ±10%
2.Tolerance of Dominant Wavelength ±1nm
3.Tolerance of Forward Voltage ±0.1V
Everlight Electronics Co., Ltd.
Device No:SZDSE-193-B01
http://www.everlight.com
Prepared date: 07-27-2005
Rev. 2
Page: 3 of 10
Prepared by: Aihua hong
EVERLIGHT ELECTRONICS CO.,LTD.
19-213/BHC-AN1P2/3T
Bin Rang Of Dom. Wavelength
Group
Bin
A9
Min
Max
467.5
470.5
473.5
476.5
Unit
Condition
464.5
467.5
470.5
473.5
A10
A11
A12
A
nm
IF=20mA
Bin Rang Of Luminous Intensity
Bin
N1
N2
P1
Min
28.5
36.0
45.0
57.0
Max
Unit
Condition
IF=20mA
36.0
45.0
57.0
72.0
mcd
P2
Notes:
1.Tolerance of Luminous Intensity ±10%
2.Tolerance of Dominant Wavelength ±1nm
3.Tolerance of Forward Voltage ±0.1V
Everlight Electronics Co., Ltd.
Device No:SZDSE-193-B01
http://www.everlight.com
Prepared date: 07-27-2005
Rev. 2
Page: 4 of 10
Prepared by: Aihua hong
EVERLIGHT ELECTRONICS CO.,LTD.
19-213/BHC-AN1P2/3T
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd.
Device No:SZDSE-193-B01
http://www.everlight.com
Prepared date: 07-27-2005
Rev. 2
Page: 5 of 10
Prepared by: Aihua hong
EVERLIGHT ELECTRONICS CO.,LTD.
19-213/BHC-AN1P2/3T
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
xxxxxx
xxxxxx
RoHS
xxxxxxxxxxxx
xxxx
xxxxxxxx
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
Device No:SZDSE-193-B01
http://www.everlight.com
Prepared date: 07-27-2005
Rev. 2
Page: 6 of 10
Prepared by: Aihua hong
EVERLIGHT ELECTRONICS CO.,LTD.
19-213/BHC-AN1P2/3T
Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Aluminum moistue-proof bag
Label
Desiccant
Label
Everlight Electronics Co., Ltd.
Device No:SZDSE-193-B01
http://www.everlight.com
Prepared date: 07-27-2005
Rev. 2
Page: 7 of 10
Prepared by: Aihua hong
EVERLIGHT ELECTRONICS CO.,LTD.
19-213/BHC-AN1P2/3T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
Test
Hours/Cycles
Sample
Size
No.
1
Items
Test Condition
Ac/Re
0/1
Temp. : 260℃±5℃
Reflow Soldering
22 PCS.
6 Min.
Min. 5sec.
H : +100℃ 15min
300 Cycles
300 Cycles
2
Temperature Cycle
Thermal Shock
22 PCS.
0/1
∫ 5 min
L : -40℃ 15min
H : +100℃ 5min
3
4
22 PCS.
22 PCS.
0/1
0/1
∫ 10 sec
L : -10℃ 5min
High Temperature
Storage
Low Temperature
Storage
1000 Hrs.
1000 Hrs.
Temp. : 100℃
Temp. : -40℃
5
6
7
22 PCS.
22 PCS.
22 PCS.
0/1
0/1
0/1
DC Operating Life
IF = 20 mA
1000 Hrs.
1000 Hrs.
High Temperature /
High Humidity
85℃/ 85%RH
Everlight Electronics Co., Ltd.
Device No:SZDSE-193-B01
http://www.everlight.com
Prepared date: 07-27-2005
Rev. 2
Page: 8 of 10
Prepared by: Aihua hong
EVERLIGHT ELECTRONICS CO.,LTD.
19-213/BHC-AN1P2/3T
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd.
Device No:SZDSE-193-B01
http://www.everlight.com
Prepared date: 07-27-2005
Rev. 2
Page: 9 of 10
Prepared by: Aihua hong
EVERLIGHT ELECTRONICS CO.,LTD.
19-213/BHC-AN1P2/3T
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 280℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of
the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Everlight Electronics Co., Ltd.
Device No:SZDSE-193-B01
http://www.everlight.com
Prepared date: 07-27-2005
Rev. 2
Page: 10 of 10
Prepared by: Aihua hong
相关型号:
19-213/GHC-XS1T1N/3T
Single Color LED, Brilliant Green, Water Clear, 1.2mm, ROHS COMPLIANT, SMD, 2 PIN
EVERLIGHT
19-213/Y2C-AP1Q2B/3T
Single Color LED, Brilliant Yellow, Water Clear, 1.2mm, ROHS COMPLIANT, SMD, 2 PIN
EVERLIGHT
19-213/Y2C-AQ2R2B/3T
Single Color LED, Brilliant Yellow, Water Clear, 1.2mm, ROHS COMPLIANT, SMD, 0603, 2 PIN
EVERLIGHT
19-213/Y2C-CP1Q2L/3T
Single Color LED, Brilliant Yellow, Water Clear, 1.2mm, ROHS COMPLIANT, SMD, 2 PIN
EVERLIGHT
19-213/Y2C-CQ1R2/3T
Single Color LED, Brilliant Yellow, Water Clear, 1.2mm, ROHS COMPLIANT, SMD, 2 PIN
EVERLIGHT
©2020 ICPDF网 联系我们和版权申明