19-213/R7C-AQ1R2/3T [EVERLIGHT]
Single Color LED,;
| 型号： | 19-213/R7C-AQ1R2/3T |
| 厂家： | 
EVERLIGHT ELECTRONICS CO., LTD |
| 描述： | Single Color LED, 光电 |
| 文件： | 总10页 (文件大小：408K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
0603 Package Chip LED(0.6mm Height)
19-213/R7C-AQ1R2/3T
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Mono-color type.
․Pb-free.
․The product itself will remain within RoHS compliant version
Descriptions
․The 19-213 SMD LED is much smaller than
l
s
r
e
․B
m
Appli
․B
․T
t
․F
․G
Device Selection Guide
Chip
Part No.
Emitted Color
Resin Color
Material
19-213/R7C-AQ1R2/3T
AlGaInP
Dark-Red
Water Clear
Everlight Electronics Co., Ltd.
Device No:SZDSE-193-R38
http://www.everlight.com
Prepared date:24-Dec-2007
Rev 1
Page: 1 of 10
Prepared by :Qilong Chen
Ver.:1 Release Date:09/19/2008 Confidential Level:一般 狀態:Approved(正式發行)
ꢀ
EVERLIGHT ELECTRONICS CO.,LTD.
19-213/R7C-AQ1R2/3T
Package Outline Dimensions
-
+
Note: Tolerances Unless Dimension is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev 1
Page: 2 of 10
Ver.:1 Release Date:09/19/2008 Confidential Level:一般 狀態:Approved(正式發行)
Prepared by :Qilong Chen
Device No:SZDSE-193-R38
Prepared date:24-Dec-2007
ꢀ
EVERLIGHT ELECTRONICS CO.,LTD.
19-213/R7C-AQ1R2/3T
Absolute Maximum Ratings (Ta=25℃)
Parameter
Reverse Voltage
Symbol
VR
Rating
Unit
5
V
Forward Current
IF
25
mA
Peak Forward Current
(Duty 1/10 @1KHz)
Power Dissipation
IFP
60
mA
Pd
60
mW
V
Electrostatic Discharge(HBM)
Operating Temperature
ESD
Topr
2000
-40 ~ +85
℃
.
S
Electro
Pa
ndition
IF=20mA
VR=5V
Lum
V
Pe
Dominant Wavelength
λd
△ λ
VF
IR
625.5
-----
-----
20
637.5
-----
nm
nm
V
Spectrum Radiation
Bandwidth
Forward Voltage
Reverse Current
1.70
-----
2.00
-----
2.40
10
μA
Notes:
1.Tolerance of Luminous Intensity ±11 %
2.Tolerance of Dominant Wavelength ±1nm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev 1
Page: 3 of 10
Ver.:1 Release Date:09/19/2008 Confidential Level:一般 狀態:Approved(正式發行)
Prepared by :Qilong Chen
Device No:SZDSE-193-R38
Prepared date:24-Dec-2007
ꢀ
EVERLIGHT ELECTRONICS CO.,LTD.
19-213/R7C-AQ1R2/3T
Bin Range Of Dom. Wavelength
Groups
Bin
E6
E7
E8
Min
Max
629.5
633.5
637.5
Condition
Unit
nm
625.5
629.5
633.5
A
IF=20mA
Bin Range Of Luminous Intensity
Bin
Q1
Q2
Min
72.0
Max
Unit
mcd
Condition
IF=20mA
90.0
112.0
90.0
Notes:
1.To
2.To
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev 1
Page: 4 of 10
Ver.:1 Release Date:09/19/2008 Confidential Level:一般 狀態:Approved(正式發行)
Prepared by :Qilong Chen
Device No:SZDSE-193-R38
Prepared date:24-Dec-2007
ꢀ
EVERLIGHT ELECTRONICS CO.,LTD.
19-213/R7C-AQ1R2/3T
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev 1
Page: 5 of 10
Ver.:1 Release Date:09/19/2008 Confidential Level:一般 狀態:Approved(正式發行)
Prepared by :Qilong Chen
Device No:SZDSE-193-R38
Prepared date:24-Dec-2007
ꢀ
EVERLIGHT ELECTRONICS CO.,LTD.
19-213/R7C-AQ1R2/3T
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
x x x x x x
x x x x x x
R o H S
x x x x x x x x x x x x
x x x x
x x x x x x x x
Reel D
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev 1
Page: 6 of 10
Ver.:1 Release Date:09/19/2008 Confidential Level:一般 狀態:Approved(正式發行)
Prepared by :Qilong Chen
Device No:SZDSE-193-R38
Prepared date:24-Dec-2007
ꢀ
EVERLIGHT ELECTRONICS CO.,LTD.
19-213/R7C-AQ1R2/3T
Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel
Note: T
Moisture Resistant Packaging
A lu m in u m m o istu re-p ro o f b ag
L ab el
D e sic c an t
L ab el
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev 1
Page: 7 of 10
Ver.:1 Release Date:09/19/2008 Confidential Level:一般 狀態:Approved(正式發行)
Prepared by :Qilong Chen
Device No:SZDSE-193-R38
Prepared date:24-Dec-2007
ꢀ
EVERLIGHT ELECTRONICS CO.,LTD.
19-213/R7C-AQ1R2/3T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level：90%
LTPD：10%
Test
Sample
No.
1
Items
Test Condition
Ac/Re
Hours/Cycles Size
Temp. : 260℃±5℃
Reflow Soldering
22 Pcs. 0/1
22 PCS. 0/1
6 Min.
Min. 5sec.
H : +100℃ 15min
∫ 5 min
300 Cycles
2
Temperature Cycle
3
4
0/1
0/1
5
6
7
IF = 20 mA
0/1
22 PCS. 0/1
22 PCS. 0/1
1000 Hrs.
1000 Hrs.
DC Operating Life
High Temperature /
High Humidity
85℃/85%RH
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev 1
Page: 8 of 10
Ver.:1 Release Date:09/19/2008 Confidential Level:一般 狀態:Approved(正式發行)
Prepared by :Qilong Chen
Device No:SZDSE-193-R38
Prepared date:24-Dec-2007
ꢀ
EVERLIGHT ELECTRONICS CO.,LTD.
19-213/R7C-AQ1R2/3T
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
stor
Bak
3. Solde
3.1 Pb-
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev 1
Page: 9 of 10
Ver.:1 Release Date:09/19/2008 Confidential Level:一般 狀態:Approved(正式發行)
Prepared by :Qilong Chen
Device No:SZDSE-193-R38
Prepared date:24-Dec-2007
ꢀ
EVERLIGHT ELECTRONICS CO.,LTD.
19-213/R7C-AQ1R2/3T
4. Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of the
hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev 1
Page: 10 of 10
Ver.:1 Release Date:09/19/2008 Confidential Level:一般 狀態:Approved(正式發行)
Prepared by :Qilong Chen
Device No:SZDSE-193-R38
Prepared date:24-Dec-2007
ꢀ
相关型号：
19-213/Y2C-AP1Q2B/3T
Single Color LED, Brilliant Yellow, Water Clear, 1.2mm, ROHS COMPLIANT, SMD, 2 PIN
EVERLIGHT
19-213/Y2C-AQ2R2B/3T
Single Color LED, Brilliant Yellow, Water Clear, 1.2mm, ROHS COMPLIANT, SMD, 0603, 2 PIN
EVERLIGHT
19-213/Y2C-CP1Q2L/3T
Single Color LED, Brilliant Yellow, Water Clear, 1.2mm, ROHS COMPLIANT, SMD, 2 PIN
EVERLIGHT
19-213/Y2C-CQ1R2/3T
Single Color LED, Brilliant Yellow, Water Clear, 1.2mm, ROHS COMPLIANT, SMD, 2 PIN
EVERLIGHT
©2020 ICPDF网 联系我们和版权申明