19-213/Y2C-CQ1R2/3T [EVERLIGHT]
Single Color LED, Brilliant Yellow, Water Clear, 1.2mm, ROHS COMPLIANT, SMD, 2 PIN;型号: | 19-213/Y2C-CQ1R2/3T |
厂家: | EVERLIGHT ELECTRONICS CO., LTD |
描述: | Single Color LED, Brilliant Yellow, Water Clear, 1.2mm, ROHS COMPLIANT, SMD, 2 PIN 光电 |
文件: | 总10页 (文件大小:228K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Technical Data Sheet
0603 Package Chip LED (0.6mm Height)
19-213/Y2C-CQ1R2/3T
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Mono-color type.
․Pb-free.
․The product itself will remain within RoHS compliant version.
Descriptions
․The 19-213 SMD LED is much smaller than lead
frame type components, thus enable smaller board
size, higher packing density, reduced storage space
and finally smaller equipment to be obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
Chip
Part No.
Material
Emitted Color
Resin Color
19-213/Y2C-CQ1R2/3T
AlGaInP
Brilliant Yellow
Water Clear
Everlight Electronics Co., Ltd.
Device No. :
http://www.everlight.com
Prepared date:1-Jul-2011
Rev.1
Page: 1 of 10
Prepared by: Chen Zheng
19-213/Y2C-CQ1R2/3T
Package Outline Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
Device No. :
http://www.everlight.com
Prepared date:6-Apr-2011
Rev.1
Page: 2 of 10
Prepared by: Chen Zheng
19-213/Y2C-CQ1R2/3T
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
Unit
V
Reverse Voltage
Forward Current
VR
IF
5
25
mA
Peak Forward Current
(Duty 1/10 @1KHz)
IFP
60
mA
Power Dissipation
Electrostatic Discharge(HBM)
Operating Temperature
Storage Temperature
Pd
60
mW
V
ESD
Topr
Tstg
2000
-40 ~ +85
-40 ~ +90
℃
℃
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Soldering Temperature
Tsol
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol Min.
Typ. Max. Unit Condition
Luminous Intensity
IV
72.0
----
-----
120
180
----
mcd
deg
Viewing Angle
Peak Wavelength
2θ1/2
λp
λd
----
591
----
----
nm
nm
Dominant Wavelength
585.5
591.5
IF =20mA
Spectrum Radiation
Bandwidth
△λ
----
15
----
nm
Forward Voltage
VF
IR
1.7
----
2.0
----
2.4
10
V
VR=5V
Reverse Current
μA
Notes:
1.Tolerance of Luminous Intensity ±11%
2.Tolerance of Dominant Wavelength ±1nm
Everlight Electronics Co., Ltd.
Device No. :
http://www.everlight.com
Prepared date:6-Apr-2011
Rev.1
Page: 3 of 10
Prepared by: Chen Zheng
19-213/Y2C-CQ1R2/3T
Bin Range Of Dom. Wavelength
Group
Bin
D3
D4
Min
585.5
588.5
Max
588.5
591.5
Unit
Condition
IF =20mA
C
nm
Bin Range Of Luminous Intensity
Bin
Q1
Q2
R1
R2
Min
72.0
90.0
112
140
Max
Unit
mcd
Condition
IF =20mA
90.0
112
140
180
Notes:
1.Tolerance of Luminous Intensity ±11%
2.Tolerance of Dominant Wavelength ±1nm
Everlight Electronics Co., Ltd.
Device No. :
http://www.everlight.com
Prepared date:6-Apr-2011
Rev.1
Page: 4 of 10
Prepared by: Chen Zheng
19-213/Y2C-CQ1R2/3T
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd.
Device No. :
http://www.everlight.com
Prepared date:6-Apr-2011
Rev.1
Page: 5 of 10
Prepared by: Chen Zheng
19-213/Y2C-CQ1R2/3T
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
Device No. :
http://www.everlight.com
Prepared date:6-Apr-2011
Rev.1
Page: 6 of 10
Prepared by: Chen Zheng
19-213/Y2C-CQ1R2/3T
Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Aluminum moisture-proof bag
Label
Desiccant
Label
Everlight Electronics Co., Ltd.
Device No. :
http://www.everlight.com
Prepared date:6-Apr-2011
Rev.1
Page: 7 of 10
Prepared by: Chen Zheng
19-213/Y2C-CQ1R2/3T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
Test
Hours/Cycles
Sample
Ac/Re
No.
1
Items
Test Condition
Size
Temp. : 260℃±5℃
Reflow Soldering
22 PCS.
0/1
0/1
6 Min.
Min. 5sec.
H : +100℃ 15min
300 Cycles
300 Cycles
2
Temperature Cycle
Thermal Shock
22 PCS.
∫ 5 min
L : -40℃ 15min
H : +100℃ 5min
3
4
22 PCS.
22 PCS.
0/1
0/1
∫ 10 sec
L : -10℃ 5min
High Temperature
Storage
Low Temperature
Storage
1000 Hrs.
1000 Hrs.
Temp. : 100℃
Temp. : -40℃
5
6
7
22 PCS.
22 PCS.
22 PCS.
0/1
0/1
0/1
DC Operating Life
IF = 20 mA
1000 Hrs.
1000 Hrs.
High Temperature /
High Humidity
85℃/ 85%RH
Everlight Electronics Co., Ltd.
Device No. :
http://www.everlight.com
Prepared date:6-Apr-2011
Rev.1
Page: 8 of 10
Prepared by: Chen Zheng
19-213/Y2C-CQ1R2/3T
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd.
Device No. :
http://www.everlight.com
Prepared date:6-Apr-2011
Rev.1
Page: 9 of 10
Prepared by: Chen Zheng
19-213/Y2C-CQ1R2/3T
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of the
hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
Device No. :
http://www.everlight.com
Prepared date:6-Apr-2011
Rev.1
Page: 10 of 10
Prepared by: Chen Zheng
相关型号:
19-213SYGC/S530-E2/TR8
Single Color LED, Brilliant Yellow Green, Water Clear, 1.2mm, ROHS COMPLIANT, SMD, 2 PIN
EVERLIGHT
©2020 ICPDF网 联系我们和版权申明