首页 |元器件品牌

19-213/W1D-ANPHY/3T [EVERLIGHT]

Chip LED (0.6 mm Height); 贴片LED （0.6 mm高度）
19-213/W1D-ANPHY/3T
型号： 19-213/W1D-ANPHY/3T
厂家： EVERLIGHT ELECTRONICS CO., LTD    EVERLIGHT ELECTRONICS CO., LTD
描述：

Chip LED (0.6 mm Height)
贴片LED （0.6 mm高度）

可见光LED 光电
文件： 总12页 (文件大小：172K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
EVERLIGHT ELECTRONICS CO.,LTD.  
Technical Data Sheet  
0603 Package Chip LED (0.6 mm Height)  
19-213/W1D-ANPHY/3T  
Features  
․Package in 8mm tape on 13〞diameter reel.  
․Compatible with automatic placement equipment.  
․Compatible with infrared and vapor phase reflow  
solder process.  
․Mono-color type.  
․Pb-free.  
․The product itself will remain within RoHS complaint version.  
Descriptions  
․The 19-213 SMD Taping is much smaller than  
lead frame type components, thus enable smaller  
board size, higher packing density, reduced  
storage space and finally smaller equipment to be  
obtained.  
․Besides, lightweight makes them ideal for  
miniature applications. etc.  
Applications  
․Automotive: backlighting in dashboard and switch.  
․Telecommunication: indicator and backlighting in  
telephone and fax.  
․Flat backlight for LCD, switch and symbol.  
․General use.  
Device Selection Guide  
Chip  
Part No.  
Lens Color  
Material  
Emitted Color  
19-213/W1D-ANPHY/3T  
Pure White  
Yellow Diffused  
InGaN  
Everlight Electronics Co., Ltd.  
Device No. : SZDSE-193-W22  
http://www.everlight.com  
Rev. 1  
Page: 1 of 12  
Prepared date: 22-Aug-2005  
Prepared by: Zhang huali  
EVERLIGHT ELECTRONICS CO.,LTD.  
19-213/W1D-ANPHY/3T  
Package Outline Dimensions  
-
+
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm.  
Everlight Electronics Co., Ltd.  
Device No. : SZDSE-193-W22  
http://www.everlight.com  
Rev. 1  
Page:2 of 12  
Prepared date: 22-Aug-2005  
Prepared by: Zhang huali  
EVERLIGHT ELECTRONICS CO.,LTD.  
19-213/W1D-ANPHY/3T  
Absolute Maximum Ratings (Ta=25℃)  
Parameter  
Reverse Voltage  
Symbol  
VR  
Rating  
5
Unit  
V
mA  
℃
Forward Current  
IF  
25  
Operating Temperature  
Storage Temperature  
Power Dissipation  
Topr  
Tstg  
Pd  
-40 ~ +85  
-40 ~ +90  
110  
℃
mW  
V
ESD  
150  
Electrostatic Discharge(HBM)  
Peak Forward Current  
IF  
100  
mA  
(Duty 1/10 @1KHz)  
Reflow Soldering : 260℃ for 10sec.  
Hand Soldering : 350℃ for 3 sec.  
Soldering Temperature  
Tsol  
Everlight Electronics Co., Ltd.  
Device No. : SZDSE-193-W22  
http://www.everlight.com  
Rev. 1  
Page:2 of 12  
Prepared date: 22-Aug-2005  
Prepared by: Zhang huali  
EVERLIGHT ELECTRONICS CO.,LTD.  
19-213/W1D-ANPHY/3T  
Electro-Optical Characteristics (Ta=25℃)  
Parameter  
Symbol  
Iv  
Min.  
28.5  
-----  
Typ.  
-----  
130  
Max.  
72.0  
-----  
Unit  
Condition  
Luminous Intensity  
Viewing Angle  
Forward Voltage  
Reverse Current  
mcd  
deg  
V
2θ1/2  
IF =5mA  
VR=5V  
VF  
IR  
2.70  
-----  
-----  
-----  
3.15  
50  
μA  
Bin Range Of Luminous Intensity  
Symbol  
Bin Code  
Min.  
Max.  
Unit  
mcd  
Condition  
IF =5mA  
N
P
28. 0  
45.0  
45.0  
72.0  
Iv  
Bin Range Of Luminous Voltage  
Group  
Bin  
Min  
Max  
Condition  
IF =5mA  
Unit  
V
15  
16  
17  
2.70  
2.85  
3.00  
2.85  
3.00  
3.15  
H
Notes:  
1.Tolerance of Luminous Intensity ±10%  
2.Tolerance of Forward Voltage ±0.05V  
Everlight Electronics Co., Ltd.  
Device No. : SZDSE-193-W22  
http://www.everlight.com  
Rev. 1  
Page:2 of 12  
Prepared date: 22-Aug-2005  
Prepared by: Zhang huali  
EVERLIGHT ELECTRONICS CO.,LTD.  
19-213/W1D-ANPHY/3T  
Chromaticity Coordinates Specifications for Bin Grading  
IF= 5mA  
Groups Bin Code  
1
CIE_x  
CIE_y  
0.274  
0.274  
0.294  
0.294  
0.274  
0.274  
0.294  
0.294  
0.294  
0.294  
0.314  
0.314  
0.294  
0.294  
0.314  
0.314  
0.314  
0.314  
0.334  
0.334  
0.314  
0.314  
0.334  
0.334  
0.226  
0.258  
0.286  
0.254  
0.258  
0.291  
0.319  
0.286  
0.254  
0.286  
0.315  
0.282  
0.286  
0.319  
0.347  
0.315  
0.282  
0.315  
0.343  
0.311  
0.315  
0.347  
0.376  
0.343  
2
3
A
4
5
6
Notes:  
1.The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01).  
2.The products are sensitive to static electricity and care must be fully taken when  
handling products.  
Everlight Electronics Co., Ltd.  
Device No. : SZDSE-193-W22  
http://www.everlight.com  
Rev. 1  
Page:2 of 12  
Prepared date: 22-Aug-2005  
Prepared by: Zhang huali  
EVERLIGHT ELECTRONICS CO.,LTD.  
19-213/W1D-ANPHY/3T  
CIE Chromaticity Diagram  
Everlight Electronics Co., Ltd.  
Device No. : SZDSE-193-W22  
http://www.everlight.com  
Rev. 1  
Page:2 of 12  
Prepared date: 22-Aug-2005  
Prepared by: Zhang huali  
EVERLIGHT ELECTRONICS CO.,LTD.  
19-213/W1D-ANPHY/3T  
Typical Electro-Optical Characteristics Curves  
Everlight Electronics Co., Ltd.  
Device No. : SZDSE-193-W22  
http://www.everlight.com  
Rev. 1  
Page:2 of 12  
Prepared date: 22-Aug-2005  
Prepared by: Zhang huali  
EVERLIGHT ELECTRONICS CO.,LTD.  
19-213/W1D-ANPHY/3T  
Label explanation  
CAT: Luminous Intensity  
HUE: Dom. Wavelength  
REF: Forward Voltage  
xxxxxx  
xxxxxx  
RoHS  
xxxxxxxxxxxx  
xxxx  
xxxxxxxx  
Reel Dimensions  
Note: The tolerances unless mentioned is ±0.1mm,Unit = mm  
Everlight Electronics Co., Ltd.  
Device No. : SZDSE-193-W22  
http://www.everlight.com  
Rev. 1  
Page:2 of 12  
Prepared date: 22-Aug-2005  
Prepared by: Zhang huali  
EVERLIGHT ELECTRONICS CO.,LTD.  
19-213/W1D-ANPHY/3T  
Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel  
Note: The tolerances unless mentioned is ±0.1mm , Unit = mm  
Moisture Resistant Packaging  
Aluminum moisture-proof bag  
Label  
Desiccant  
Label  
Everlight Electronics Co., Ltd.  
Device No. : SZDSE-193-W22  
http://www.everlight.com  
Rev. 1  
Page:2 of 12  
Prepared date: 22-Aug-2005  
Prepared by: Zhang huali  
EVERLIGHT ELECTRONICS CO.,LTD.  
19-213/W1D-ANPHY/3T  
Reliability Test Items And Conditions  
The reliability of products shall be satisfied with items listed below.  
Confidence level：90%  
LTPD：10%  
Test  
Hours/Cycles  
Sample  
Size  
No.  
1
Items  
Test Condition  
Ac/Re  
0/1  
Temp. : 260℃±5℃  
Reflow Soldering  
22 PCS.  
6 Min.  
Min. 5sec.  
H : +100℃ 15min  
300 Cycles  
2
Temperature Cycle  
Thermal Shock  
22 PCS.  
0/1  
∫ 5 min  
L : -40℃ 15min  
H : +100℃ 5min  
300 Cycles  
3
4
22 PCS.  
22 PCS.  
0/1  
0/1  
∫ 10 sec  
L : -10℃ 5min  
High Temperature  
Storage  
Low Temperature  
Storage  
1000 Hrs.  
1000 Hrs.  
Temp. : 100℃  
Temp. : -40℃  
5
6
7
22 PCS.  
22 PCS.  
22 PCS.  
0/1  
0/1  
0/1  
DC Operating Life  
IF = 5 mA  
1000 Hrs.  
1000 Hrs.  
High Temperature /  
High Humidity  
85℃/ 85%RH  
Everlight Electronics Co., Ltd.  
Device No. : SZDSE-193-W22  
http://www.everlight.com  
Rev. 1  
Page:2 of 12  
Prepared date: 22-Aug-2005  
Prepared by: Zhang huali  
EVERLIGHT ELECTRONICS CO.,LTD.  
19-213/W1D-ANPHY/3T  
Precautions For Use  
1. Over-current-proof  
Customer must apply resistors for protection , otherwise slight voltage shift will cause big  
current change ( Burn out will happen ).  
2. Storage  
2.1 Do not open moisture proof bag before the products are ready to use.  
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.  
2.3 The LEDs should be used within a year.  
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 60%RH or less.  
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.  
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the  
storage time, baking treatment should be performed using the following conditions.  
Baking treatment : 60±5℃ for 24 hours.  
3. Soldering Condition  
3.1 Pb-free solder temperature profile  
3.2 Reflow soldering should not be done more than two times.  
3.3 When soldering, do not put stress on the LEDs during heating.  
3.4 After soldering, do not warp the circuit board.  
Everlight Electronics Co., Ltd.  
Device No. : SZDSE-193-W22  
http://www.everlight.com  
Rev. 1  
Page:2 of 12  
Prepared date: 22-Aug-2005  
Prepared by: Zhang huali  
EVERLIGHT ELECTRONICS CO.,LTD.  
19-213/W1D-ANPHY/3T  
4.Soldering Iron  
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds  
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do  
soldering of each terminal. Be careful because the damage of the product is often started at the time of  
the hand solder.  
5.Repairing  
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable,  
a double-head soldering iron should be used (as below figure). It should be confirmed beforehand  
whether the characteristics of the LEDs will or will not be damaged by repairing.  
EVERLIGHT ELECTRONICS CO., LTD.  
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,  
Tucheng, Taipei 236, Taiwan, R.O.C  
Tel: 886-2-2267-2000, 2267-9936  
Fax: 886-2267-6244, 2267-6189, 2267-6306  
http://www.everlight.com  
Everlight Electronics Co., Ltd.  
Device No. : SZDSE-193-W22  
http://www.everlight.com  
Prepared date: 22-Aug-2005  
Rev. 1  
Page:2 of 12  
Prepared by: Zhang huali  

相关型号：

19-213/Y2C-AP1Q2B/3T

 Single Color LED, Brilliant Yellow, Water Clear, 1.2mm, ROHS COMPLIANT, SMD, 2 PIN
EVERLIGHT

19-213/Y2C-AQ2R2B/3T

 Single Color LED, Brilliant Yellow, Water Clear, 1.2mm, ROHS COMPLIANT, SMD, 0603, 2 PIN
EVERLIGHT

19-213/Y2C-CP1Q2L/3T

 Single Color LED, Brilliant Yellow, Water Clear, 1.2mm, ROHS COMPLIANT, SMD, 2 PIN
EVERLIGHT

19-213/Y2C-CP2Q2B/3T

 Single Color LED,
EVERLIGHT

19-213/Y2C-CQ1R2/3T

 Single Color LED, Brilliant Yellow, Water Clear, 1.2mm, ROHS COMPLIANT, SMD, 2 PIN
EVERLIGHT

19-213/Y2C-FN1P1VZ/DT

 Chip LED (0.6mm Height)
EVERLIGHT

19-213A-T1D-CP2Q2HY-3T

 0603 Package Chip LED (0.6mm Height)
EVERLIGHT

19-213SDRC/S259/TR8

 Single Color LED,
EVERLIGHT

19-213SURC

 Chip LED (0.6 mm Height)
EVERLIGHT

19-213SURC/S530-XX/TR8

 Chip LED (0.6 mm Height)
EVERLIGHT

19-213SYGC

 Chip LED (0.6 mm Height)
EVERLIGHT

19-213SYGC/S530-E2/TR8

 Single Color LED, Brilliant Yellow Green, Water Clear, 1.2mm, ROHS COMPLIANT, SMD, 2 PIN
EVERLIGHT
©2020 ICPDF网 联系我们和版权申明