HBO80A-48-2.5N [BTCPOWER]
Up to 350W/100A Half Bricks; 高达350W / 100A半砖型号: | HBO80A-48-2.5N |
厂家: | BROADBAND TELCOM POWER, INC. |
描述: | Up to 350W/100A Half Bricks |
文件: | 总2页 (文件大小:139K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TM Broadband TelCom Power, Inc.
Redefining “Current” Limits In Power Conversion
BTCPower
HBO or HBP CPH Series
Description
Up to 350W/100A Half Bricks
The HBO (open-frame) or HBP (enclosure-frame) CPH
series of low cost DC/DC converters offer the different
current levels and are comparable to existing half-bricks.
With a wide input voltage range of 18-24V or 36-75V they
are available with an output voltage of either 1.5, 1.8, 2.5,
3.3, or 5 Volts. All models feature an input filter, output
overvoltage and overtemperature protection, output current
limiting and short circuit protection. The HBO series open-
frame construction with base-plate and HBP series
enclosure frame achieve efficient heat transfer with no hot
spots. The use of patented Flat Transformer technology and
other patent-pending design concepts facilitate maximum
power delivered. The converters combine creative design
concepts with highly derated power devices to achieve very
high reliability, high performance and offer a low cost
solution to systems designers that are challenged to
maximize power and minimize board space.
Specification Summary
• 100A @ 1.5V, 100A @ 1.8V, 80A @ 2.5V,
70A @ 3.3V, 70A @ 5.0V,
Features
• Delivers up to 350W / 100A in Half Brick
• High efficiency patented topology
• Low profile of only 0.36 inch
• Tight output regulation, typical ±2%
• No minimum load required
• 1.5V, 1.8V, 2.5V, 3.3V, or 5V output modules
• 100V/100ms (50V/100ms for 24V model) Input transient
capability
• Ripple & Noise (20Mhz BW) 100 mV (pk-pk)
or 2% (pk-pk)
• -40°C to +100 °C ambient operation
• Meets Basic Insulation requirements of EN60950
• UL 1950 recognized, CAN / CSA C22.2 No. 950-95
Certified, and TUV EN60950 ( pending )
• Wide input operating range 18-36V or 36-75V
• On/Off pin and remote sense
• Meets conducted limits of FCC Class B and CEI
IEC61204-3 Class B with external filter
• Output adjustment +/-10% range
• 1500V, 10M input-to-output isolation
Applications
• Telecommunications
• Frame construction with heat spreader for low
temperature rise
• Data Communications
• Output overcurrent and overvoltage protection
• Over Temperature protection
• Wireless Communications
• Networking Gear
• Servers, Switches and Data Storage
• Semiconductor Test Equipment
• Distributed Power Architecture
• Input Under voltage protection
• MTBF of 1,600,000 hours @ 50°C ( Bellcore )
Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A.
Tel.: 714-259-4888 • Fax: 714-259-0840 • www.btcpower.com • Email: sales@btcpower.com PB HBO/HBP CPH Rev1 4-7-03
TM
HBO or HBP CPH Series
Up to 350W/100A Half Bricks
Product Brief
Part Number and Selection Information
Model
Input
Output
Voltage Current
Efficiency
Part Number
Positive Logic Negative Logic
Voltage (Volts)
Current (A)
75% Load
(%)
Nominal
Range
No load
Full load
(Volts)
(Amps)
HBO100A-24-1.5P HBO100A-24-1.5N
HBO100A-24-1.8P HBO100A-24-1.8N
24
24
18-36
18-36
0.1
0.1
7.5
8.9
1.5
1.8
100
100
83
84
HBO80A-24-2.5P HBO80A-24-2.5N
HBO70A-24-3.3P HBO70A-24-3.3N
24
24
24
48
48
48
48
48
18-36
18-36
18-36
36-75
36-75
36-75
36-75
36-75
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
9.5
10.9
16.3
3.7
2.5
3.3
5.0
1.5
1.8
2.5
3.3
5.0
80
70
87
88
89
84
85
88
89
90
HBO70A-24-5P
HBO70A-24-5N
70
HBO100A-48-1.5P HBO100A-48-1.5N
HBO100A-48-1.8P HBO100A-48-1.8N
HBO80A-48-2.5P HBO80A-48-2.5N
HBO70A-48-3.3P HBO70A-48-3.3N
100
100
80
4.4
4.7
5.4
70
HBO70A-48-5P
HBO70A-48-5N
8.1
70
Typical at Ta= +25 º C under nominal line voltage and 75% load conditions, unless noted.
For encapsulated (epoxy enclosed) models, replace “HBO” in part no. with “HBP”.
Outline Information and Pin-out
Pin Connection
Pin#
Function
1
2
Vin +
On/Off
3
4
Case
Vin -
5
6
7
8
9
Vout -
Sense -
Trim
Sense +
Vout +
All dimensions are in inches [mm]
Pin 5 and 9 are dia. 0.08 [2.03]
All other pins are all dia. 0.040 [1.02]
Pin material: Brass
Pin finish: Tin/Lead plated
Heat spreader (baseplate) material:
Aluminum
Weight: 50.5g
The information and specifications contained in this brief are believed to be accurate and reliable at the time of publication. Specifications are
subject to change without notice. Refer to product specification sheet for performance characteristics and application guidelines.
Worldwide Headquarter:
European Headquarter:
Broadband TelCom Power, Inc.
1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A.
Tel.: 714-259-4888 Fax: 714-259-0840
Email: sales@btcpower.com
Broadband TelCom Power Europe B. V.
Dukaatstraat 14, 4879AD Etten-Leur, The Netherlands
Tel.: 31-76-5038350 Fax: 31-76-5012038
Email: info.europe@btcpower.com
www.btcpower.com
PB HBO/HBP CPH Rev1 4-7-03
相关型号:
©2020 ICPDF网 联系我们和版权申明